Cloud of CLEARPath LTRF/FEC and WebEX (CMR hybrid, but probably applies to full as well)
I noticed when my 8710 connects to the cloud of WebEX via SIP Clearpath LTRF/FEC was not supported.
Did anyone else see this? Everyone knows if they are going to add it as a feature?
Hello
ClearPath is currently supported only on the server of telepresence, telepresence MCU and the TC / EX series endpoints. Calls set up to other devices, including the cloud WebEx will not negotiate ClearPath.
Kind regards
James
Tags: Cisco Support
Similar Questions
-
Creative Cloud Desktop app said Photoshop and Lightroom are installed, but they are not.
Hi colinwalks,
Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.
Kind regards
Romit SInha
-
Creative office cloud say this Egde inspect and reflow are installed, but they are not.
Creating cloud Office say inspecting Egde and reflux are installed but are not, the system is a total new instalation.
The system is OS X 10.8 and office cloud creative is very good work with the installation of Photoshop CC, but it tells me that I already have Adobe Edgde inspect and reflow installed, but the program is not installed on the computer.
If I try to download from websites where they come with office cloud creative and say that they are up-to-date.
How to install these programs?
Jesper
Have you tried the creative cloud cleanup tool?
-
I use the MODBUS library and can receive data, but I can send it very well?
Hello
I use the Modbus Library to communicate with a VFD to control a fan. I use the master write and read vi. I can write data to the drive mechanism and get the fan to do what I want. The VFD is supposed to send a package of confirmation after I told him to do something and I can also read its records. When debugging the VI it shows that the problem is that the buffer always reads zero and the VI timesout. If I look at the USB adapter lights to RS 485, I use to interface with the drive mechanism, I see that the flashes of light RX immediately after I send a message. So I should have something in the buffer. Does anyone have any suggestions?
Aaron
OK, here's what has happened to those who have this problem. In the series Receive.vi MB The bytes to the Port of property node has been reading 0 even if there was something in the buffer. Executing the program was then stuck in a loop until it expired and never went to read anything of serial port buffer. I didn't spend too much time wondering why that VI has not worked and created my own. Within a period appropriate after writing to the serial port, I used the same bytes to the Port property node and was able to get the exact number of bytes to the stream and then VISA vi the number of bytes to read. I received the message of the right answer and everything seemed good. But of course that NO! Then I experimented with different speeds of writing to the drive mechanism to get the fan to operate at different speeds. I found a small range of speeds where I get no response to the VFD, either in operation or by sending me a response packet. After a while, I found that there is a mistake in the LRC-8 code in the MODBUS library OR. It does not prescribe that the LRC will be a two-character value. So if your LRC is proving to be a single character such as F value (which should be 0F) you get an incomplete MODBUS message. This has been easily corrected in the vi LRC8 saying "number in hexadecimal string" vi to produce output with a minimum width of two. Then everything worked fine. Moral of the story, it's the MODBUS library is awkward.
-
CMR Cisco and Webex cloud solution
Hello
I hope this is the right place to ask the questions about CMR cloud services and webex... If my current company is looking for room conference based cloud solution. WebEx is superb and I tested with the test account. I'm waiting for the trial of CMR license which, according to the guidelines of the page Web will take up to a week. I'm still confused between Webex and CMR. Are they basically the same?
Anyway, now my main question (not the one above) is that we also have a Cisco Telepresence C40 and a few cameras. We have them picked up by another agency recently closed. Can we use with the service cloud CMR or webex? Is there another device required for use with the cloud?
Thank you
Difan
Cloud of CMR is characteristic of WebEx Meeting Center and makes it possible to endpoints of video and applications to join the WebEx meeting. So yes, it is possible with cloud of CMR for your C40 to participate in a Meeting Center meeting.
-
Has anyone tested WebEX CMR with SX 10?
Hello
A SX10 recorded with cucm can be used to for the conferencing inbound and outbound via webex bridge.
Some useful links are
http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs...
/Cisco-VCs-basic-configuration-control-with-Expressway-deployment-guide-x8-6.PDFhttp://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs...
/Cisco-VCs-SIP-trunk-to-unified-cm-deployment-guide-CUCM-8-9-10-and-x8-6.PDFManish
-
Autonomous SX20 removes calls with WebEx CMR room after 12 min
Good afternoon
I've deployed SX20 two autonomous units and have a new WebEx CMR account configuration as well. When I make a call from one of the unit in my personal room of the CMR ([email protected] / * /), he established yet restless at exactly 12 minutes. Some information about our deployment as of today:
- Both SX20-end point connects to the internet through our edge ASA (5510)
- I configured ACL entries to allow outgoing calls from internal IP addresses of these two unit at ALL by the following
- TCP 1720, 2776, 443 AND 5061-2777, 5060-80, 389
- UDP 1721-1722, 2326-2486, 16384 TO 32766, 36000-59999
- The two end-point SX20 is configured to use H323 in Direct mode
- We do not have a VCS or any other device acting as h.323/SIP gateway
- The two end-point SX20 is able to call each other, without any problem
I have a TAC case open about it, but I wanted to see if someone else might have experienced similar problems and get a glimpse. Thanks in advance!
If you use H323, yes then remove the H323 Associates commands. Out of curiosity, why not use you SIP?
The SAA doing deep inspection of packets on the sessions, when media is flowing there is no package that flows and the ASA who sees a link expired and cut off the communication. You need to change the H323 settings, if you want to leave it on, but it's more work than its worth (IMO).
- Both SX20-end point connects to the internet through our edge ASA (5510)
-
I bought the iPhone 6 I have the cloud on which is active and I did not I have cloud id and password of any solution?
Hey zeeshan137,
I understand that you have purchased an iPhone who may have active locking activation. Here's an article on this topic and how to solve the problem:
Turn off find my iPhone Activation Lock - Apple Support
https://support.Apple.com/en-us/HT201441
Thanks for being a part of the communities of Apple Support!
-
The telepresence Management Suite does support WebEx One Touch?
If so
What would be the best to use for integrating Cisco Telepresence and WebEx, if you BE6K with CUCM and VCS controlling the C-Series, Cisco TMS or Cisco TM ends?
I look forward to your helpful responses.
Hello
I think that your first question is answered in this thread: https://supportforums.cisco.com/message/3880606#3880606
/ Magnus
Sent by Cisco Support technique iPhone App
-
Creating cloud disappeared from my toolbar and don't throw the app
Hi Atul,
I tried to install CCID, now three times. First of all, it hangs at 99% for at least 10 minutes each time, and then it will not load.
What should I do? Should I uninstall the whole CC? This frustrating c graduation.
Thank you
Hi WHK304,
You tried to install Creative Cloud a couple of times and that you were not impossible to install it, I recommend you run the cleanup tool and check if there are leftovers from creative cloud. Here is the link that you could follow and share the results once made. Error "Unable to install" received when installing Adobe Creative Cloud desktop application
Thank you.
-
I have problems in installing the creative cloud, because mark "error 206" and not let me download. What could be the cause of this problem? and that he could fix?
Error 201 & 205 & 206 & 207 or several U43 errors
-https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html
-
Hey guys, I just downloaded cloud creative adobe and I installed it but when I try to open nothing comes up at all and I'm just watching my office.
How can I fix it?
Donaldsond58526776 in addition to the suggestion of Howard Heflin I recommend to run the uninstall utility to desktop application Adobe Creative cloud available during the uninstall of the Adobe Creative cloud desktop application and then reinstall the creative cloud desktop application. If you receive additional errors, feel free to update this discussion.
We also invite you to contact our support team to contact customer service for direct assistance with common mistake.
-
Recently, I installed the trial versions of cloud creative, cc of lightroom and photoshop cc and noticed that my computer would be closed in an orderly fashion. It either freezes once I chose the option stop or displays the message Windows is going down, but then freezes. Here are the latest articles that I installed before this problem and I have not made further changes to my computer.
Hello
Please remove Creative Cloud app and Adobe Application manager using the-
Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?
Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html
Let me know if it works!
-
Hello, I have a question, if I already paid for Adobe Creative Cloud (including all Adobe Applications) and I installed it in a desktop computer in my office, I might as well install in my laptop at home? Or should I uninstall it in the desktop to transfer it to my laptop? Thank you
Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac has no importance... 2 on the same operating system or 1 on each
-Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)
-An individual account is for one person and may not be shared with anyone else
Maybe you are looking for
-
Yahoo email won't load and store settings in the OS x mail application
I tried to mail yahoo mail OSX El Capitan. Using the Yahoo tab in the box menu for the establishment of new accounts I can get the drop-down list to enter my email address that is recognized by Yahoo saying welcome + the address just entered. I press
-
Copy and paste effects between clips
Is it possible to copy and paste effects between clips and overwrite the previous settings? When I just stick your ads in existing settings, which means that I have to delete everything before gluing
-
Qosmio X 770 screen is certainly not as bright as other laptops
I visited SEVERAL retailers that sell Qosmio X 770 and 770 X screen is certainly NOT as bright as the other phones such as Qosmio models other same Satellite. I compared the X 770 other laptops in parallel to several retail stores, and the 770 X seem
-
* Original title: Windows 10 disappointment Recently, I bought a HP with Windows 10 Tower preloaded. I gave up 10. I would like to return to the Windows 7 desktop. If I buy or buy this software, I guess I have to 'wipe' 10 of my machine? Or I wou
-
Hello! Trouble you answer!
Hello! I have problems you answer on new threads! -What did I something wrong? I have not received all PM I'm not able to get an excess to one of the features on top of an answer. Not able to add screenshots of links, ect Thank you! Dokie PS, I know