clueless progress bar strikes again

Similar Questions

• MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  Here are some links from Apple which may help

  How to choose a boot on your Mac - Apple Support drive

  On the screens, you see when you start your Mac - Apple Support

• Progress bar of logo and gray MacBook Pro Apple.

  MY MacBook pro is not terribly old. Not more than 3 years is not new.

  It has the apple Logo and underneath is a gray progress bar. It loads thar bar take some time, then just stops almost as some laptops do when they update

  anywyas what I need help with this!

  Please?

  Thank you!

  make a gray screen:

  your hardware works basically

  the charges Apple logo:

  The Apple logo can only be demonstrated that it was brought in by the initial blob of software boot loader. See gray what apple means that your player has responded to this request and produced the right stuff. That this kind of things, then initializes, and to get more data in the drive Initializes the file system. The file system then try to mount the boot disk to read the files.

  draws a progress bar:

  If this bar remains for more than a very short time, the boot drive cannot be mounted, because the directory is damaged. Your computer is now running the equivalent of disk utility (ERD) while showing you the progress for about five minutes.

  -If this unit can be mounted after the repair, the boot continues.

  -If the drive cannot be mounted, your Mac will stop, because it cannot continue.

  What to do:

  Start to recovery and run utility disk (ERD) repeatedly until it comes clean or gets stuck.

  -If it comes clean after a few passes, try to start again

  -If it gets stuck, you need another drive to make progress. Get another drive and an external enclosure to maintain and install it on Mac OS from scratch. Then you can use it to try to save some of the files, if necessary. OR if you have a reliable backup, you can perform a restore on the new drive.

• A second non-functional progress bar is always visible on the status bar, how do I get rid of him?

  The second bar is inside the handle of resizing on the right side of the status bar. It does nothing, but takes place. The functional progress bar appears only when it is used inside Panel outside panel of authentication on the left side of the status bar and message. I turned the status bar and turn on again - no luck. I also tried to disable all the modules - no luck. I also changed the themes - no luck. I have to re - install the browser?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.

  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.

  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  If you have many extensions then you first activate half test extensions that half the problem.

  Continue to divide the bad half that still has the question until you find that one is causing it.

• Stuck on Start Up Apple screen logo with 50% progress bar, tried everything. Help, please!

  Hello world. I'd appreciate it really all the advice that you can offer me to help me fix my laptop. I have a mid-2010 Pro 2.4 GHz Core 2 Duo Macbook running OS X Yosemite. A year ago, he started trolling a lot, so replaced the HDD with a Samsung 850 EVO 120 GB SSD internal 2.5 inch SATA III. He works much better since.

  A few days ago, I bought a Google Chromecast and had set up with my MBP. Subsequently, he began trolling and I noticed there are apps in the Launchpad, that I had never downloaded (reader of Google, Gmail, Youtube, etc.). I could not remove these applications or drag them to the trash. Concerned, I decided to back up my files on a USB key and re - install the OS X.

  However, during the priming of the MBP, it is stuck on the Apple logo screen, with the bar never go beyond 50%. (Photo: http://postimg.org/image/66qh6x633/)

  What I tried:

  PHASE 1 (Before reformatting)

  -Safe Mode: Button power button and shift held down. Hit or miss, worked 1-2 times, but when I reboot, is again stuck at the Apple logo.

  -Reinstall OS X: CMD + R; After 15-20 minutes get to OS X utility screen; Reinstalled OS X Yosemite; 7 hours to reinstall - but when the mbp restarts to complete the installation, it is stuck at the Apple logo again.

  -Reformatting: CMD + R; 15-20 minutes get to OS X utility screen (several reboots to work); Select repair for all discs/drives (Samsung SSD, HD Recovery). Exit said that both are very good; Select clear to HD recovery. When this was done, I tried to reinstall OS X Yosemite, but the MBP shuts down suddenly. When I turned on it again, it is returned to be stuck on the loading screen Apple logo. Attempt to restart after 15 +, but same result every time.

  PHASE 2 (After reformatting).

  -Power-> CMD + R = blocked screen Apple logo with 50% progress bar

  -Power-> Option = shows 2 player and free Wi - Fi area (Pic: http://postimg.org/image/58qi2j1vl/); Have you tried all the combinations, but regardless, always gets stuck at the screen of the Apple logo to 50% complete, after an hour, I suddenly hear ' to use English as the main language... ". ", but the screen is still stuck. I left it on 36 hours once and nothing has changed

  -Power-> Shift = error (Pic: http://postimg.org/image/tahklsvy1/); Keep restarting or shows some other error (Pic: http://postimg.org/image/thstc6b59/) and restart. Never crosses.

  Tried other things:

  -Reset PRAM: When restarting MBP, is stuck at the Apple logo screen, 50% progress bar

  -Reset SMC: Stuck on the Apple logo screen for a long time and then the screen turns off, but the laptop is still on. When I press Caps Lock, the indicator light lights up. Also, after some time, I again hear "to use English as...". "even if the screen is off. No matter what I press, it does not wake up to the screen.

  Note:

  -The bottom of the laptop feels hot (maybe), but I do not hear the drive in motion.

  I am trying to save my mbp because I can't get a new one for a few months. Any advice/help is greatly appreciated! Thank you very much!!!

  P.S.: I only am not too computer savvy, please use everyday words words/non-tech, when possible, thank you!

  Remove the SSD and install it in a closed Chamber.  Connect it to the MBP via USB.  It will start?

  Ciao.

• What happened to the progress bar in iTunes?

  Hi all

  I just downloaded and installed 9.2.1 to my iPhone 6s more use iTunes on Windows 7.

  Nothing happened.

  I waited for a while and then decided to close iTunes and start again. When I clicked on the 'X' I got an alert that asked if I really wanted to leave because a download is in progress.

  There was no indication of what is happening until my iPhone started to react to installation. Then he was done.

  Should there be a progress bar?

  Thank you

  When you download there will be a little Gizmo animation next to the search box at top right. Click here to see the details.

  TT2

• Display the progress bar when you use the Calculate function

  Hello

  For my project, I need to convert the raw values of a signal in physical quantities.

  To do this, I use the function "calculate".

  Because I have a lot of data, it takes time, and the user does not know if it works or not.

  The first thing I did, is to Add Dialog.BeginWaitCursor and Dialog.EndWaitCursor which works well, but is not enough.

  To view activity, I want to display a progress created bar before calling 'Calculate' and stopped after that.

  The progress bar does not need to show real progress, but displayed only a movement of progress even if it again to zeor until the end of the calculation.

  I have read some information on the progress made on this forum, but he did on selfmade function and tiara not call functions.

  This is why it is not useful to me.

  I don't know how to do this using vbs.

  Is it possible to create something like this?

  The best solution would be to get the status of the function of 'Calculate' to see where he is, but the function is not created to do this.

  Thanks for all the ideas,

  Best regards

  CFOE

  Hey CFOE,

  I asked R & D at the same time, because I thought I remembered seeing a progress bar continued in tiara before, but I didn't know if it was something we might call with a VBScript command.  I just heard back that you can, and it's here...

  Call AutoLoopInit
  
  MsgBox "ready to stop the progress bar?
  
  Call LoopDeInit

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Create a progress bar of defragmentation PDM

  I'm saving up large amounts of data (32 analog channels 5 usb votlage Renault all plugged into the same computer). Samples of continues to 100Samples per second for 1 hour or more. The PDM save the file is huge at the end of the program so when I hit stop the whole thing hangs then that labview executes the final block of defragmentation DDHN. I don't necessarily mind it, but it would give me so much peace of mind if I had some sort of defrag in progress progress bar that pops up when this happened. Is there a way to do this? How can I find the current state of the VI and that thread to an indicator of progress bar?

  In fact, I think that I just, if I replace the path and error of the son with shift registers, it passes the correct path to the beginning of the loop again! is that correct?

• Progress bar doesn't look right in Windows 7

  I use a progress bar control and set the ATTR_USE_PROGESS_BAR_VISUAL_STYLES attribute. It works perfectly on Windows XP. The progress bar looks identical to Windows ones. However now check how it looks in Windows 7. No matter what either windows aero style is enabled or disabled, the progress bar seems very strange. He completed smoothly and do not complete all of the control - the edges are left vacant.

  I have attached the screenshot.

  Any ideas what I did wrong?

  

  Well, I don't see the problem. There is, indeed, a bug which prevents incremental updates to the chart now displays correctly when the progress bar is overlaid (and ridden by his own label control overlaps again, as if it was covered by a different control).

  This bug will be fixed in a next version. In the meantime, there is a workaround you can use: If you hide and redisplay the control immediately before setting the percentage, the drawing objects should disappear. For example:

  SetCtrlAttribute (panelHandle, PANEL_PROGRESSBAR, ATTR_VISIBLE, 0);
  SetCtrlAttribute (panelHandle, PANEL_PROGRESSBAR, ATTR_VISIBLE, 1);
  ProgressBar_SetPercentage (panelHandle, PANEL_PROGRESSBAR, newPercentage, NULL);

  Let me know if that will fix it for you.

  Luis

• BlackBerry Smartphones Blackbold does not start after the progress bar screen. any help

  I have a problem with my blackberry bold 9700. When I reboot, the next screen that comes after the progress bar screen is my network name of phone, and nothing happens. I get a screen of "vodafone" with their logo.  nothing happens after and I am not able to access blackberry. What's wrong. any help on how to run again

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  Good luck and let us know!

• Progress bar of media of blackBerry Smartphones

  When I play the music file I don't see the progress bar. When I see the music finished, he is visible. This means that during the game I can not forward or rewind the music file. How can I fix this. I have 4.7.0.109

  During multimedia playback, tap the screen but do not click... which brings up the progress bar. (and, if you type again, it does disappear)

• Lack of Smartphones from blackBerry audio progress bar

  The audio progress bar never appears when I play audio, except if I am listening to the latest Podcast in my group then if I press on the "next, > ' button it will appear for a few seconds and I can use it. The rest of the time he never appears if I'm listening to a podcast or music files. It's a real disappointment of having to listen to a Podcast from the beginning when I get back, just because I can't pass through where I left earlier.

  Does anyone else have this problem?

  My audio and Podcasts are all stored on the 8 GB memory card. I have 1500 + audio files and subscribe to some Podcasts 6. All this through iTunes and sync the storm using the media of Blackberry software. The media sync software is used as a separate application that I couldn't make it work through the normal Blackberry Desktop application (everything else seems to work fine in it). In addition, my Blackberry was updating its software when I synced everything up first, so I guess I have the latest version of applications.

  Any help would be greatly appreciated I have to abandon the storm for Podcast listen if it is not a solution.

  Carl

  If you lightly tap the screen (NO click) when audio is played, the audio bar appears for about 5 seconds.  If you tap the screen again when the audio bar is visible, the audio bar will disappear.

  This is true also for when you play videos with audio on your Storm.

• Dell Dimension 5150 do not start LED logo on 123 + progress bar is stuck at 5% no beeps

  My old Dell Dimension 5150 has sometimes suffered from crashes during startup for quite awhile, but it now appears permanent.

  The symptom is the logo dell appears, but the startup progress bar stops at 5%, diagnosis LED 1,2 & 3 are stable on, power light is green fixed, no beeps, no response to the keys.

  In the past disconnecting the cable for 5 minutes, which gives all the internal connectors a re-allocation of places, you try to start again seemed to do the trick, but no more.

  Any suggestions where to look?

  No such thing as PC2 4300 except for sellers who are less honest.

  http://www.crucial.com/USA/en/compatible-upgrade-for/Dell/dimension-5100

  

  PC2 4200 is too slow

  PC2 5300 5 5 5 12 works fine. Suppliers must match for speed and the CASE.

  Blockages can be feed if it isn't certified EPS12v PFC.

  Minimum recommended is CS750M Corsair.

  http://www.crucial.com/USA/en/dimension-5100/CT667636

  Supplies are not units of 12 v x watts.

  You need 150W on the 3.3v 5v Rails and 15-20w on the + 5VSB rail.

  RAM RAM may NOT BE ECC or buffered or Registerd HIGH density AMD.  Must be LOW DENSITY INTEL Compatible ram.

  RAM cannot BE QUADRI ROWS can operate 2R and 1R, but you can NOT MIX the ranks.  They must all be single or dual rank.

  http://www.Newegg.com/product/product.aspx?item=9SIA7S63715258

• Why can I not see the consistent progress bar?

  Hi all

  I don't see the consistent progress bar. Any ideas? If I press first and make very thin I can see it a little. What is my machine or a programming problem?

  Thank you

  

  I conclude that it is with the most recent update. I uninstalled and reinstalled several times and it started working fine until I updated for updates and then it broke again.

  Now the question is who should I report it to get it repaired?

• Try to install the apps CC, progress bar stuck

  I spent most of my day trying to get the Cloud Creative desktop application installed (I had now create a new user on my computer that has apparently fixed that), and when I tried to install hearing as a test, the progress bar is stuck at 40%. Since he was going nowhere, I tried to cancel it, but it got stuck on the cancellation for centuries. So what I did close the app, put an end to all Adobe processes and open Office CC again. He crashed twice, and then I tried to run as an administrator. It is now running, but my download of hearing is now stuck at 11 percent without obvious reason.

  Anyone had similar problems? Is it possible to fix it? (I tried to delete the adobe files in %AppData%).

  This is a 64-bit computer if running on what should be fully updated Windows 7 with 8 GB of RAM and an i5 4670K.

  Well for some reason, it now works perfectly and everything is installed, I don't know what was going on.