Cluster successively reading
Hello
I hope that I will word my understandable problem
I have a cluster of clusters and now I want to do something with each cluster in the large cluster. So a loop would be nice. But I don't know how I can use a cluster after another in a loop.
Thank you for helping me
Best regards
If clusters within the 'big cluster"are all the same, you should change to an array of clusters, then you can use the autoindexing from a loop.
If this isn't the case, you must use the function unbundle for each cluster you want to read separately because they are not the same.
Hope this helps,
Christian
Tags: NI Software
Similar Questions
-
MD3000, 1 physical node, 1 guestm - via MSCS cluster vm
Hey all,.
New to VMware, 5 days or more. Had no problems until the cluster of files. I read a lot of suggestion on the site before joining, but curious experience to relevant question.
2 knots 2950, md3000, MSCS - all good
Off of passive node
Configured VM Guest, added Vswitch for physical nic, these NICs to the guest. (did not VMkernal to create the switch as if I did it, on behalf of the network, my created switch was not available in the drop-down list) I thought I had to creatre switch VMkernal for NFS to work... for the connection to the MD3000.
So, added the static IP to nic on guest, a LAN, a cluster link. Added to the cluster - success
Reanalysis in and SAS5E listed in ESX adapeter. and displays the LUN on current MD3000 3 which I would like to connect.
Now its time for RDM... correct?
When you try to mount LUNS to guest, no available RDM... it is grayed out?
Said also that it is due to the md3000 already data container and NTFS already.
Any suggestions on this played out scenerio is appreciated.
G
For MD3000, the only solution is the first: create (or add) a Virtual disk, give the host, rescan storage adapters and add the raw disk to the VM node.
See also http://www.vmware.com/pdf/vsphere4/r40/vsp_40_mscs.pdf
André
-
Satellite P100: 5-in-1 reader with XD but not working with SD cards
Hello
I have a problem with my satellite P100, the 5-in-1 reader successfully read SD and XD cards, but since 3 days ago (no upgrade, or any new software), it still works perfectly well for XD cards, but no more for SD cards. When I insert an XD card, I get a drive letter, with an SD card and tried several other different, nothing happens, as if they did not exist.
I am running Win2k server, and the problem started about 3 days ago.
Thank you!
Hello
How about the update driver?
As suggested go to Device Manager, select the card reader and reinstall the driver.
What you can do, is also to remove it from the Device Manager and after new OS restart, the drive should be recognized again.
In this case, the driver must be initialized again. Check it out.Another question. Have you used the option remove? Usually if you want to remove the card or disconnect the USB device you should use first remove it safely and then you can remove the card from the slot. Don t forget.
-
How to read the digital square wave pulses
Hello
I recently bought a blue-white meter. I have successfully read the digital square wave from the sensor. However, I face a problem to calculate the flow rate and the total volume of liquid. Can someone help me with this?
Technical data of the flowmeter can be access to the http://www.blue-white.com/Products/ElectronicFlow/MicroFlo/80000-406_microflo.pdf. And the calculation can be found on page 9. I use NI9401.
Thank you
-
How to read 3 analog inputs simultaneously with 6070E?
Hello
I wanted to read 3 analog signals simultaneously using cards of acquiring data NI PXI-6070E and Labview 2010.
I can with success read and record the 1 signal (which you can see in the attachment), but do not know and can not find examples on how to read 3 signals simultaneously. Any help, especially a simple example would be great.
Thank you!
Just click on = pull down from the constant physical channel, select Browse and shift-click or Ctl-click here to add other channels. You can also type in new channels with the ai0 syntax: 2 for three continuous channels for example.
-
Error reading POWER HP 66xx block
/ * New warning the user * /.
I learned (slowly) obtain a set of instuments external connected to LabView. For the most part, I was a successful read and write commands and data from the basic instruments. There is a problem that I can not understand both of my Agilent 6653 power supplies.
Can I get the supplies to put the power switch as well as setting volts/amps output. The problem is trying to read measured volts and amps back. The VI freezes and gives an error message I don't understand. Here are a few screenshots, if it is useful to download the VI, of course I can do it.
It is a criterion VI the only function is to have control over basic food and read a Keithley DMM to make a comparison. Both work very well until I have add the SOUL READ vi on the block diagram power supply section. It seemed simple, VISA and ERROR pass through and he must spit, voltage and current as a DBL.
I manually tested the controls and the returned data looks okay.
FIRST MISTAKE...
SECOND MISTAKE... It relates the Keithley DMM
Don't know where to find an answer. Hoping there is a simple answer.
Thanks in advance to all who wish to take the time to help.
-
Hi all
I have a group of different data types that I save as a binary file and read it again at a later date with an another VI. I saved the definiton of cluster with a typedef, so I am sure that I use the same type of reading and writing.
Now, I needed to change the cluster in the writing program should include another value. However, I still want to be able to use the VI of reading to read the old and new data files. I also have the opportunity to change the definition of binary file in the future (in VI writing) and be able to quickly adapt the VI to read the new definition while maintaining compatibility with the old.
My plan was to have a typedef of the pole for each revision, say v1.ctl, v2.ctl, v3.ctl...
Suppose I have a binary input file that has been saved using one of these typedefs but I don't know which. I now open the file and try to read its binary contents with each of my typedefs for data type and to stop once the reading of the binary VI gives no error. Then I would translate this cluster to the definition of cluster current version by wiring through existing values and assigning values of model / default for variables that are not on the binary file.
My idea on how this could work is described here, with three versions of filetype:
For each new version of filetype I would need a new business structure although the content of the business structures is almost identical.
Because I save the file type definition version in my files, I could even simplify and use a separate case structure to update the data and fill in the dummy data:
Now the error structures are completely identical, only their inputs differ by type. How can I work around this? How can I loop over the typedefs from different cluster effectively?
I use LabView 2012 SP1.
Since you already have a version of the cluster, just read this byte digital itself and then use a case structure date back to before the version and read the entire cluster based on whatever the version of the type definition read you.
-
Support of SD W500 32 G SD reader
32G SD cards are supported in the slot SD W500? I have a 32G card I can with success read and write using a cheap USB drive connected to the W500 (4061 B13) but have been unable to get the W500 to recognize in the SD slot. The card is a class 6 SDHC.
I found a different view on the site that provided a reference to a Microsoft patch. After installation I am now able to see my card. The link to the fix is:
-
Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading
Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.
I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.
Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.
DeckLink driver 10.0
First CC 7.2.1
Mac OSX 10.9.2 (mavericks before the same problem)
Hi Andy,.
You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.
Best,
Peter Garaway
Adobe
Premiere Pro
-
Permissions applied to the Cluster or host to propagate to child virtual machines
If I ask a Cluster folder read-only permissions or a host (for a particular group of users) with the propagate to child objects enabled, when a new virtual machine is created within that folder, the user is able to do much more than R/O.
I know that we can create a VM (in a different vision) folder with the same R/O permissions, but that guarantee no new virtual machines will have this permission applied if these new virtual machines are not placed in a VM file at creation time.
It seems that on the new VM creation, the virtual machine is not inheriting the R/O permission in the folder/Cluster host. This is the expected behavior?
Thank you!
I believe that the more restrictive permissions apply. I don't have that backwards?
I should have been more descriptive. If you have an ad group with say joe in this document, that the group is set to read only role and joe is in another group that has an administrator role, joe becomes and administrator. If joe is added in as a user rather than a group, then the more restrictive role wins, so you are right.
-
Acrobat Reader 8 Pro - Windows 7 (help pls)
Hello. I have adobe acrobat reader 8 licance professional. I used successfully with windows xp. but I do not use with windows 7. When I try to convert pdf a word documents or other documents give an error message: "cannot pdf maker files.
How is - I have this problem? Please help me?
I want to use successfully reader acrobat 8 pro with windows 7 and I want to create a pdf with the help of windows 7.
NOTE: I can create pdf files using third party programs. I don't want to using third-party programs. I want to create pdf using acrobat 8 pro.
Thank you...
What did you use?
Adobe Reader 8: cannot create PDF files
Adobe Acrobat 8 Professional: use the forum for Adobe Acrobat
-
Hello
Nice day.
Yesterday, I attended an interview. In our discussion, the interviewer asked me after.
Node - 1 has default undo tablespace UNDOTBS1 (5 GB in size) as
Node - 2 a default undo tablespace as UNDOTBS2 (5 GB in size)
If UNDOTBS1 is completely (100%) used by node-1, if she (node 1) automatically uses UNDOTB2 which is designated as the default node-2 UNDO tablespace.
I answered NO and said node - 1 cannot BE used UNDOTBS2 of node-2 for the success of its day-to-day operations. She gets up a mistake.
Could someone please has little light on it?
Oracle version: 11:2.0.4
OS: RHEL 5.5
Thank you..
Yes the Undo tablespace is unique to each instance, node 1 cannot use the node 2 undo tablespace to store undo for its operations. If the undotablespace is full and only active blocks remain the instance emits an error for a fixed size undo tablespace. The only use that is possible on the cluster is reading another instances undo tablespace, never write about it.
What your interviewer that you might happen?
Concerning
Thomas
-
HP Elite X 2 1011 G1 compressed: secure with BCU TPM activation error
Hi, I am trying to activate the TPM secure with BCU, but every time I get this error at startup
"MUD embedded controller data are invalid then that MPM is locked.
Please MPM to unlock and lock again to capture data of valid MUD. "with accept and 10 - > 0 counting down.-I am able to change the other settings of the BIOS with the BCU, but not of TPM.
-the BIOS password
-J' I reset the default bios settings
This is the file I used for config
BIOSConfig 1.0
Security level of TPM device
* Change
View
Hide
TPM Embedded Security security level
* Change
View
Hide
BONES of TPM security level management
* Change
View
Hide
Reset the TPM secure of operating system security level
* Change
View
Hide
TPM reset to the factory settings
* No.
Yes
Reset the TPM security of OS
Disable
* Select
BONES of the TPM Management
Disable
* Select
Activate the TPM on next startup
Disable
* Select
TPM device
Hidden
TPM 1.2
* TPM 2.0
TPM activation policy
* F1 at startup
Allow the user to reject
No promptAnd it is the newspaper (after the second execution of the script, all the parameters have been updated in the first inning, but TPM activate next startup update every time I run the script)
19/07/2016 11:25:22.240764 | 9040 | Definition of | HP:hared:treamLog:treamLog. Severity of log level > = Info
19/07/2016 11:25:22.240764 | 9040 | Info | HP:hared:treamLog:treamLog. BEGIN.
19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | * HP c. 4.0.15.1 Bios Configuration utility *.
19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Platform: 2009 - HP Elite x 2 1011 G1 compressed
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | BIOS version: 1.13 16/05/2016
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Manufacturer: Hewlett-Packard
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Computer name: CL103009999204
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Serial number: 5CG55264Z8
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Unicode supported password: Yes
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | OS: Microsoft Windows 10 Enterprise 64-bit
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | OS version: 10.0.10240
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Command line: [BiosConfigUtility64.exe / set: new.repset /cpwdfile:12345678.bin / verbose/l]
19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
19/07/2016 11:25:23.022093 | 9040 | Info | biosconfig::utils:howMessage. < SUCCESS msg = "password successfully reading the file" / >
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of implementation 'TPM Device security level' with 3 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Responsible for defining 'TPM Embedded Security security level' with the 3 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of implementation "OS management of TPM security level" with the 3 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of setting "Reset of TPM of operating system security level" with 3 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Responsible for defining 'TPM reset to the factory default values' with 2 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Full setting 'Reset the TPM for OS' 2 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of "OS management of TPM" layout with 2 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of setting 'Enable the TPM on next boot' with 2 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Full adjustment "TPM Device" 3 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Riddled with political 'TPM Activation' attitude 3 values.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Read the 10 file settings.
19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Apply all the settings of the BIOS
19/07/2016 11:25:26.350584 | 9040 | Info | biosconfig::FileSettings:ApplySettings | In 'Device TPM security level' changeStatus = 'skip '.
19/07/2016 11:25:26.366188 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'TPM Embedded Security security level' setting changeStatus = 'skip '.
19/07/2016 11:25:26.381834 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'The OS level security TPM Management' layout changeStatus = 'skip '.
19/07/2016 11:25:26.417235 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting "Reset of TPM of operating system security level" changeStatus = 'skip '.
19/07/2016 11:25:26.439250 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'TPM reset to the factory default values' changeStatus = 'skip '.
19/07/2016 11:25:26.458811 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'Reset of the TPM for OS' changeStatus = 'skip '.
19/07/2016 11:25:26.475825 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Implementation changeStatus "OS the TPM Management" = "jump".
19/07/2016 11:25:26.571695 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'Enable the TPM on next boot' changeStatus = 'pass' returnCode = 0 oldValue = newValue 'Disable' = 'enable '.
19/07/2016 11:25:26.591711 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting "TPM Device" changeStatus = 'skip '.
19/07/2016 11:25:26.614732 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'TPM Activation strategy' setting changeStatus = 'skip '.
19/07/2016 11:25:26.642752 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Processing parameters: 10, errors: 0 warnings: 0, was ignored: 9, succeeded: 1
19/07/2016 11:25:26.649256 | 9040 | Info | biosconfig::utils:howMessage. < SUCCESS msg = "no error occurred" / >
19/07/2016 11:25:26.649256 | 9040 | Info | HP:hared:treamLog: ~ StreamLog | End.See you soon
I noticed that using TPM 1.2 does not give me this problem, so I went to that and everything was good. I expected that TPM 2.0 was less probematic, but it is not true.
-
Qosmio G50 - Everest made see the CPU temp corectly?
My Qosmio G50 cpu temp seems normal 35 ° C, but when I open the Download Manager after beginning everst sometimes show constant 70 c never never falls if student even I left inactive for a few hours.
I wonder if this temp is correct and can cause the dmg or its software fault and calculates wrong because I hear no noise or any fan.
Hello
70 c are nothing special and it s normal behavior that the CPU temperature would increase if the CPU performance increase.
AFAIK the CPU is able to last a temperature of 100 ° C.
Regarding the 3rd party tools;
These tools are not tested with different sensors so it of really difficult to tell if the temperature has been successfully read
But if the temperature is too high then the laptop would be closed automatically to prevent damage of material form
If the laptop still works so I guess that the temp is too high -
If my system is not any data received about 10 second span, he began to spit from 0 values in the histograms. I already deleted the error messages so that the system does not stop altogether. I would like to system to wait indefinitely for a data point... there at - it a variable that sets the time limit for the triggers? I use the scope or screws for the data acquisition process.
Watch the context-sensitive help for the function niScope Cluster.vi reading Multi, then look at the description for the terminal of time-out. It is said to use a value of-1 to wait an infinite amount of time for data entry. If you create a constant on the terminal, you'll see that the default value is 5 seconds. This is why you are getting values of 0 even if there is no entry. But if the timeout - 1, your problem should be solved.
Good luck!
Maybe you are looking for
-
Is there such a thing as the Windows support and Service Center, phone 02032866214?
Is there such a thing as the supported Windows and Service Centre, Tel. 02032866214, or is it a phone scam?
-
Error 0 x 80042318 - I am connected to my network, but with "limited access".
Although I have installed and am running and using the IE Version 9.0.1600., now, I am unable to do a full full Internet_Connection. I am connected, but with "Limited access" and consequently, nomatter who HTTP://WWW.Address I try to connect, the pa
-
HOW TO SPEED UP ASLOW COMPUTWER?
My computer is slow on starting and opening applications and documents, how can I speed up my computer's performance?
-
Creation of stubs of BlackBerry method using wscompile on WSDL of ColdFusion
-
TMS and improved security server TCS
Hey there everyone! On the Tandberg Web site, there is a page that contains updates for the OS that have been tested for use with the administration server and content server security. However, the last update was 9/2010. Is there a comparable down