Lack of data release
If my system is not any data received about 10 second span, he began to spit from 0 values in the histograms. I already deleted the error messages so that the system does not stop altogether. I would like to system to wait indefinitely for a data point... there at - it a variable that sets the time limit for the triggers? I use the scope or screws for the data acquisition process.
Watch the context-sensitive help for the function niScope Cluster.vi reading Multi, then look at the description for the terminal of time-out. It is said to use a value of-1 to wait an infinite amount of time for data entry. If you create a constant on the terminal, you'll see that the default value is 5 seconds. This is why you are getting values of 0 even if there is no entry. But if the timeout - 1, your problem should be solved.
Good luck!
Tags: NI Software
Similar Questions
-
Lack of data Points in the chart Illustrator
Hello, I create a line chart in Illustrator (CC) on a Mac and after entering the data, one of the lines is lack of data points. When the line should be, it breaks everything. Here is a picture of what it looks like (see the purple line and the second column). I have not removed all the points or it separated. I tried to recreate it, and he did the same thing? Why the data points are missing? How can I fix this problem so that they appear?
(Note: I asked this via chat 0186206467 and it took so long to get an answer that cat quit on me.)
What happens if you enter the data without the comma? This missing data.
-
Satellite A210: Fact of recovery - lack of data on the E drive
My laptop is Toshiba Satellite A210.
Through training the sales package is a system recovery with factory settings.
Now a Virgin pure hate, or even delete what was NOT on the system drive.I tried to restore the information through various programs (R-Studio, FileRecovery, etc.). I found the files, but an attempt to restore grants that size 0 bytes.
I cry and I m very sad.How to return information from the E drive?
Windows Vista Home Premium operating system.Hello
Using the recovery DVD everything will be deleted from the HARD drive.
And if I say everything I mean everything. All partitions, the data, the files will be deleted.Sorry, but I don t think you will be able to restore files deleted using common software
Perhaps a specialist would be able to restore it but it s always about money, you know I think that this rescue procedure is not cheap. -
Re: Lack of data partition after installing partition magic
Hi there I m after a little help.
Yesterday, I installed a program called partition magic. The installation went without errors or problems, but then when I run the program for the 1st time I got a blue screen and my closed laptop. I restarted the laptop and uninstalled the partition magic, but now, I noticed that the data partition is missing. I tried to do a restore back to before I installed the partition magic, but it does not help.
Any help would be great. Thank you
Lee
Hi Lee,.
May I ask why you installed the partition magic? Installation of these programs is always a bit risky and should only be done if you really want to change some sheet music or something else.
Have you already checked Windows Disk Manager? Go to control panel > system and security > administrative tools > computer management.
You can see the second partition and might be hidden or something else?
-
How the lack of dates online results of the query and convert the output
Hi Experts,
My inline query returns the data in this format
2-jan-2016 10 4-jan-2016 33 5-jan-2016 20 7-jan-2016 70 8-jan-2016 77
I want to display the output as
1-jan-2016 2-jan-2016 3-jan-2016 4-jan-2016 5-jan-2016 6-jan-2016 7-jan-2016 8-jan-2016 9-jan-2016 10-jan-2016 0 10 0 33 20 0 70 77 0 0
Can you please help me with query how over the missing dates, is it tier, collar or pivot?
Thanks in advance.
Kind regards
IVW
Hello
Is that what you are looking for?
WITH
SampleSet
AS (SELECT TO_DATE (' 2 January 2016', 'DD-mon-yyyy') dt, val 10 FROM DUAL)
UNION ALL
SELECT TO_DATE (' 4 January 2016', 'DD-mon-yyyy'), 33 FROM DUAL
UNION ALL
SELECT TO_DATE (' 5 January 2016', 'DD-mon-yyyy'), 20 FROM DUAL
UNION ALL
SELECT TO_DATE (' 7 January 2016', 'DD-mon-yyyy'), 70 FROM DUAL
UNION ALL
SELECT TO_DATE (' 8 January 2016', 'DD-mon-yyyy'), 77 FROM DUAL
)
sample_rn as
(
Select
DT
val
, dt - min (dt) (order 1) + 1 rn
2 line_no
Of
SampleSet
order by
DT
)
mindate as
(select min (dt) dt sampleset)
dates in the FORM
(
SELECT
DT + level 1 - dt
null val
level rn
1 line_no
Of
MinDate
CONNECT BY ROWNUM<= 10 ="" --="" number="" of="">=>
)
a, as
(
Select
to_char Col (DT)
rn
line_no
Of
dates d
Union
Select
to_char Col (Val)
rn
line_no
Of
sample_rn
where
RN<= 10 ="" --="" number="" of="">=>
)
Select
*
Of
a pivot (pass the max (col) of rn (1,2,3,4,5,6,7,8,9,10))--liste of columns 1 to))What makes a list with 2 rows. Line 1 has dates starting with the first data of sampleset. and line 2 has the values. The number of columns, you can determine yourself.
Kind regards
Peter
-
Lack of data in the windows menu option - WHY WHY?
All,
I'm busy assessment DW. I implemented the PHP / MySQL development environment. Now, I would like to connect my database and can not find the option of DATABASE in the windows menu - anyone know why?
Obsolete server behaviors have been removed from the DW CC. However, you can still download the ZXP DMX Zone Extension.
Remember, the server behaviors are not recommended for a good reason. Effective in PHP 5.5, the old fashioned MySql connections will stop working. You really should use modern code with (improved) MySqli or PDO connections.
Nancy O.
-
Oracle 11 lack of Data Source drivers
I just installed Oracle 11 GR 2 (Administrator option) client on a clean Windows Server 2008R2. When I go to "Data Sources (ODBC)", the pilot of Oracle 11 g is not an option. This happened on two servers, but worked on others. I have a server with the option a the pilot as SQORA32. DLL in the BIN of the Oracle Directory. So, how can I add to the drivers on the servers of problem?Hello
Have you installed the client software Oracle 32-bit or 64-bit?
The "usual suspect" here is that people are looking in the wrong odbc administrator, and you must use the 32-bit administrator to find 32-bit odbc drivers...
C:\Windows\SysWOW64\odbcad32.exeIt will be useful,
Greg -
Hello
I'm looking for information on the maintenance schedule of publications, information such as:
1. what was the 10.2. out?
2. When will the next maintenance come out?
3 How long is a maintenace release supported?
I tried to look for this info... but to no avail.
Grateful if someone could point me to the right direction/link.
Thank you
Bravo!
MohanMaybe you can try http://metalink.oracle.com
SS
-
Lack of data store after extend RAID 5
Hi all
I have ESXi 5.0 is installed on a DL360 with P400i raid card. I got a 1.8 to raid configuration and then added 2 discs to the attack through the ACU. Everythign went perfectly (rebuilt the table, expanded the logical drive...)
restarted and VMWare is now, no provision of persistent storage. I tried fdisk-l (no output) started GParted and he sees the 1.8 to partition but it will not mount. Says that it is corrupted etc. The rest of the partitions very well mount. (as it starts in VMware).
I really do not rebuild the VM if possible ;-)
Thank you
Welcome to the community,
I'm afraid you're struck by http://kb.vmware.com/kb/2006942. I just checked the VMware web site of HP to see if there is already a driver update, but I couldn't find one. The only way that esxi can manage RAID sets most of ~ 2 TB with the cciss driver, is to split the RAID in several smaller logical volumes.
André
-
Hello
When I try and run a backup job everyone failed to backup with the following message is displayed:
Cannot create capture instant for {name of VM}, error-3948 (exception of api vcb)
Someone has an idea what is because I can't see any problems configuration causing this and research the host event log, it seems successful to create snapshots and then just remove them again? I am able to take snapshots of the guests with no problems.
He works? Make sure that name resolution works front and rear for guests and the host.
David
-
Someone at - it a list of the dates release CS3, CS4 and CS5?
Also, what like the upgrade price with CS5, CS5.5 compare to CS5 CS4 or CS3 CS4. I'm trying costs of the project etc...
(According to Wikipedia) release date were March 2007, CS4, October 2008 CS3, CS5 April 2010 and CS5.5 April 2011.
-
ORA-19612: datafile 0 not restored because of missing data
Hello
I'm testing a restoration of the controlfile. The database is in archivelog mode and automatic backup is defined on IT. I did successfully a full backup and backup of database copy.
To test I did the following:
-Note the DBID
-closing of the database
-Rename the two controlfiles:
$ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
$ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
When I try to restore the controlfile autobackup form I get the following error. What could be reason please?
Thank you![rcat@oel54]$ rman target / Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 10 00:07:41 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: RCAT (not mounted) RMAN> set dbid 502889862; executing command: SET DBID RMAN> restore controlfile from autobackup; Starting restore at 10-DEC-10 allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=19 device type=DISK recovery area destination: /u02/fra database name (or database unique name) used for search: RCAT channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp found in the recovery area channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210 channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101209 channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 12/10/2010 00:09:55 ORA-19870: error while restoring backup piece /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp ORA-19612: datafile 0 not restored due to missing data $ ll /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp -rw-r----- 1 oracle dba 10354688 Dec 9 23:44 /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
ORA-19612: datafile 0 not restored because of missing data
lack of data---> file may damaged from backup sets...
so try to take backup once more and then restore.In addition, you must give
RMAN > list backup of controlfile; comes from the target database not new database...Thank you
-
where to find data to run the sample applications
Hello
I loaded the sample applications, but there is no data
where is it possible to find a script for LOAS in demonstration base data
FOR EXAMPLE: to use the sample application tree, we need data in EBA_DEMO_TREE_PROJECTS
concerning
user_fr_cg63 wrote:
I loaded the sample applications, but there is no data
where is it possible to find a script for LOAS in demonstration base data
FOR EXAMPLE: to use the sample application tree, we need data in EBA_DEMO_TREE_PROJECTS
Data should be created automatically on the installation of the application using the function to support objects .
If I install the application of tree-sample on apex.oracle.com then 9 lines are created in EBA_DEMO_TREE_PROJECTS.
Lack of data suggests that there was a problem during the installation. You can check this by clicking on the icon to support objects on the application home page, then install view summary in the taskbar on the right.
-
Data store missing after the reconstruction of the raid array
One of the players in my raid array has failed a few days ago.
I had a spare drive in the table so the controller immediately began the process of rebuilding and all servers were running throughout.
When the reconstruction has been completed (I checked this via the user interface of raid array and the newspaper), I had to stop the server to remove disc defective (not replaceable chassis hot) and when I restarted the server, the data on the raid array store isn't there anymore. I also checked through the raid controller interface that I removed the (defective) drive and that the table was always in a ready state when he came.
In vsphere client, when I click on the storage... Add link, the server sees the material but if I click then it tells me that it will be re - format the volume. See attachment. I have most certainly does not take the next step and reformat. Simply, I took the screenshot and regularized.
I found these instructions, but they are for an older version of ESXi and am unsure if they are correct for ESXi 6.0.0 338124
VMware KB: Lack of data store after the reconstruction of the RAID disk/LUN
Here are the steps I should follow?
If these aren't the right instructions can you tell me the version which is for ESXi 6.0.0 338124 that I couldn't find anything either.
Thank you
Hi ThompsG,
Yes, there are two data stores for the virtual machine located on the RAID array. The virtual machine itself was stored in a different data store that was not in the raid array.
I spent about 48 hours last week, including this morning, trying to coax ESXi recognizing volumes, with no luck. Finally, I gave up and I removed the virtual computer hard drives that were on the corrupt data store. Then the virtual machine came without problem.
Finally, since I have everything on these 2 volumes backed up to a cloud provider, I have recreated the two data stores in the raid array and began the restoration process. It is currently running and has about 16 days left to go.
-
It always seems to be a problem with Lightroom 5. This post is one of the first results, after trying to Google this problem, and it's for LR3. I don't understand why something so basic to some photos (and video) Organization has been neglected for so long.
I tried to import and organize all my old photos and videos by date with LR5. They have been backed up and copied several times over the years, most recently on an external drive last week. Thus, each file has a 'creation date' last week. But 'change' is the date recorded.
It's not bad for pictures with a good EXIF "date taken" - but LR5 resembles the "creation date" for videos, making it completely useless to organize them into folders based on date. He puts videos I recorded in 2010 (in accordance with the "modification date") in a case 2014-12. Why.
It is not only a video problem - some pictures that I took with devices that does not record date "EXIF taken" are also filed in folders of this month even if the 'update' on them is correct as is 5 years.
How can I count on LR5 organization importing and based on the date when it is based on the files (lack of "date taken") having never been copied or backed up?
It has been at least partially fixed in LR 5.5, for images: Lightroom: the dates do not match for the missing files metadata date/time. But I just tested import a .avi in LR 5.7 / Windows 8.1 and the date below the thumbnail in the grid has been the time of last modification of the file system, while the Date of Capture in the metadata Panel has been set at the time of importation.
I started a new topic in the Adobe official feedback forum: Lightroom: capture still inconsistent date/time for videos. Please add your vote and review on it.
Maybe you are looking for
-
Why can't I take a screenshot in iOS 10.0.1?
Why can't I take a screenshot in iOS 10.0.1?
-
How to set local security Cryptography
-
HP Envy5530 cancels 3 pages in the print job.
I have looked at various other messages on this problem but have not seen a solution. I tried the suggestions in other posts, but they do not work. I'm trying to print an 8-page document, using the wireless interface. At halfway through the three pa
-
The v3-572pg made in charge of the optical drive?
I just bought this article and have not yet received. I know that it does not include an optical drive, but I would like to know if the hardware supports the addition of a. Thank you!
-
It was formerly called 'speed up a slow Windows XP tablet' but dig it please because I really need help. It is not completely answered, but it was helped a lot. Maybe just the first 2 paragraphs read & ignore the rest of my initial question right und