CM6040 HP, print process crashes intermittently: 'freeze '.

Similar Questions

• Printer driver crashes when printing with Office 2013/8 64-bit Windows

  Printer: HP Color LaserJet CM1312nfi

  Printer driver: V5.1 (to date, downloaded from the HP support Web site) or generic V5.6

  OS: Windows 8 Professional 64-bit

  When I try to print an Excel document with Excel 2013 and V5.1 printer driver, the program freezes and must end with the Task Manager. This always occurs with the same document, but not with all the documents. Program also crashes when opening the preview before printing to the same document.

  The same document prints fine with V5.6 generic print driver and with the driver supplied with Windows 8.

  The same document prints fine with the driver version 5.1 on Windows 7 and Office 2010. The combination of Windows 7/Office 2013 has not been tested. Windows 8/Office 2010 combination has also not been tested.

  When I try to print an empty document with the word 2013 and the generic printer V5.6, the program driver crashes and must end with the Task Manager.

  My conclusion is that the HP printer drivers have a problem with Windows 8 or office 2013 or a combination of both.

  The printer driver supplied with Windows 8 and is installed automatically is useful as a temporary workaround, but it lacks some options, e.g. manual duplex.

  Upon request, I am ready to send the Excel document by e-mail for verification of the problem.

  For any help or suggestion will be appreciated.

  Thanks in advance,

  ULI

  It worked!  Thank you very much.

  Where others have difficulties to find the offending setting, here's another way to track him down.

  -> control Panel-> devices and printers-> (select printer-> right mouse)-> printer properties-> settings-> tab Installable Options (bottom)-> Printer Status Notification-> change on 'off '.

  Thank you!!

• video intermittently freezes

  video Vista system crashes intermittently

  Hello

  Of course, the most obvious answer is to update video drivers. However, other factors including
  problems them in the programs may be at stake.

  -----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• com Apple.XPC.launchd process crash reports constantly present with high CPU

  There is a process"Crash report"in the activity monitor which uses 10 to 25% constantly disappears and reappears. When I leave it to activity monitor it will be right back. In addition, the MacBook fan is going crazy. In the systemlog, I see this article several times per second:

  com Apple.XPC.launchd [1]: (secagntd) Service worked only for 1 seconds. Push the respawn in 9 seconds.

  com Apple.XPC.launchd [1]: (secagntd) Service worked only for 1 seconds. Push the respawn in 9 seconds.

  There are a lot of Crash reports in the OS X Console. The Crashlog looks like this:

  Process: secagntd [1030]

  Path: / usr/local/bin/secagntd/secagntd

  ID: secagntd

  Version:?

  Code type: X 86-64 (Native)

  Parent process: launchd [1]

  Manager: secagntd [1030]

  User ID: 0

  Date/time: 19:15:25.985 2016-07-31 + 0200

  OS version: Mac OS X 10.10.5 (14F1909)

  Report Version: 11

  Anonymous UUID: 75C82E52-67A5-8A7F-56CA-FB9B99BB5C0E

  Time since started awake: 2900 seconds

  Crashed thread: 0

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  Dyld error message:

  Symbol not found: _wlScanBSSID

  Referenced from: /usr/local/bin/secagntd/libwpsapi.dylib

  Intended for: /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211

  in /usr/local/bin/secagntd/libwpsapi.dylib

  Which application uses the secagntd? How can I get rid of these error reports?

  Try a SMC reset. Article covers when necessary, but this will not affect anything.

  Reset the SMC

• Firefox crashes or freezes when opened. Help, please!

  My firefox does not open. I have been using Firefox without problems for years until yesterday. I have a Mac OS X 10.10.3. Whenever I open Firefox, it immediately crashes or freezes. I have to go to my dock to "force quit" Firefox. I tried to uninstall and reinstall the latest version of Firefox 38.0.1 several times and no luck. I tried to start Firefox in "safe mode" and as soon as my default screen opens (Yahoo.com) and when I click on anything, whether it's freezing immediately again.

  I'm not able to get Firefox open enough before it freezes to be able to go to 'preferences' to try to change or remove cookies or anything else.

  Also, I had hundreds of bookmarks, when I get Firefox and running, is there a way to recover these bookmarks?

  Currently, I am forced to use Safari which is horrible. Help, please!

  Thank you

  Chris Reppart

  primetime347 said

  Is there another way to fix the FF on my main account on my computer instead of having to switch everything to another account?

  You do not create another account on the computer. You're doing a
  new user of Firefox with your own user account profile. Firefox may have
  many profiles under the same user account.

• Using WIN XP SP3 and OE 6 many crashes and freezes

  I use WIN XP SP3 Home edition and OE6.  I have three problems 1.  Very slow operation.  2. frequent crashes when you delete the email.  3. frequent freezes and shuts down completely.

  It makes it almost impossible to get anything done.  It takes most of the morning to read my mail.  Work with IE8 is the same slow, crashes, and freezes.

  You probably corrupted dbx files. Compact all folders first and see which helps. If this isn't the case, create a new identity.

  ********************

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Compress your OE folders:
  http://www.insideoe.com/files/maintain.htm#compact

  **********************

  You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  An Outlook Express basic repair kit
  http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh 
  *********************

  General precautions for Outlook Express

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Windows XP crashes intermittently when stopping. Stuck on the screen with the default windows background color and the mouse pointer.

  We are an OEM that systems of electronic Assembly is based, in our machine is a PC running Windows XP Professional that provides the interface for the operator. Some of our systems have begun to crash intermittently when stopping.  Up to now we have seen it on three machines.  There has been no change to hardware or drivers that we put on these machines.

  The PC is supposed to stop at the point were he said "It is now turn off your computer", but it hangs when the only thing on the screen is the default windows background and the mouse pointer. The mouse moves, but that's all. He is unresponsive to ctrl-alt-delete, or any other entry.

  This was reported 5 times, and in any case there's nothing in any log file which would tend to indicate where the problem is maybe.

  I guess we have a bad driver or device, but the problem only happens once all stops of 5-10, and only after the machine is turned on for a while.

  I just turned on the detailed status messages, but they did not stop the machine since.

  What I asked is: is it possible to get windows to connect to all events stop? I really want to know what he was doing when he stopped.  Can someone else think something I can look at, or a better way to debug this?

  Re: a suggestion on this new monitor to 'prove' is the source of the problem
  Disconnect it, connect a type non-ecran touch "ordinary".
  stop/restart in safe MODE, make sure that the old monitor is not appear in the Device Manager [what we used to call a ghost]
  If it IS, delete it & uninstall the sw provided with touch screen
  Reboot in normal mode
  Try a stop
  If you get the old orange it'S now SAFE, tell the seller about IT.

• Intermittent freezing of the computer when opening programs

  Hello. I have intermittent freezing problems which I will try to describe. About 5 to 7 times a week I click on a link like Comcast Mail Office.

  The 'think' rotation slider will begin, the page does not load and then a message appears after a minute or two for example 'Windows cannot find Comcast.net' the only way I was able to solve this problem is to restart with the power-it button does not restart by using the standard method. I pretty much can do nothing until I restarted and then the computer works well. Comcast has tested the modem and the connection and says it's ok.

  The issue occurs at random times. It happens more frequently when I begin a session, but it froze several times while I'm running an application or are already on the internet. I performed the tests in the pc tools and things seem ok. I have 3 GB of ram and a measure of consumption on my desk that indicates normal operation.

  Any thoughts would be appreciated. It is far from aggravating and barely embarrassing, but I would like to know the cause.

  Hi Kenny,

  Please see the following thread (even if it is a different issue, some of the troubleshooting steps are the same):

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• Why can't I update my windows? and I get the host process crashing

  Well, I'm not able to update my Windows Vista Home premium and recently I get host process crashing error, I try to updated manually or through the update it gives error code 80072FE and the update was on 05/20/2010.

  Well, if I click on the link to update microsoft it cannot display web page gives, so any solution please help

  Hello CamboiJack,

  Thanks for your post.  Take a look at this article for a possible solution to your problem and let us know if it did or did not work for you.

  See you soon

• Cisco WRVS4400N - Intermittent freezing

  Hello!

  I have looked through the forum to find answers to my problem, but doesn't look like I'll find.

  The problem:

  Router freezes randomly.

  When this happens:

  -No IP/DNS

  -No response to ping

  -No contact at all (wifi or cable)

  Works fine after reboot for awhile.

  General information:

  Firmware version:

  V2.0.2.1 - ETSI

  Local newspaper after the restart:

  8 Oct 12:53:40 - ipsec0: no IPv6 routers present
  8 Oct 12:53:43 - left promiscuous mode of the device br0
  8 Oct 12:53:43 - the promiscuous mode device eth1 left
  8 Oct 12:53:50 - [VPN Log]: closing
  8 Oct 12:53:50 - EVENT IPSEC: KLIPS ipsec0 unit turned off.
  8 Oct 12:53:52 - [VPN Log]: from Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509 - 1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR;) Vendor ID [email protected] / * /)
  8 Oct 12:53:52 - [VPN Log]: @(#) built on May 10 2011:17:24:48:
  8 Oct 12:53:52 - [VPN Log]: NAT-Traversal port-4500 floating adjustment to it
  8 Oct 12:53:52 - [VPN Log]: port floating nat_t activation criteria = 1/port_fload = 1
  8 Oct 12:53:52 - [VPN Log]: including NAT-Traversal patch (Version 0.6 c)
  8 Oct 12:53:53 - [VPN Log]: ike_alg_register_enc(): OAKLEY_AES_CBC of activation: Ok (ret = 0)
  8 Oct 12:53:53 - [VPN Log]: commissioning 1 cryptographic support
  8 Oct 12:53:53 - [VPN Log]: begun assistance pid = 960 (fd:5)
  8 Oct 12:53:53 - device eth1 promiscuous mode is entered
  8 Oct 12:53:53 - br0 device entered promiscuous mode
  8 Oct 12:53:53 - [VPN Log]: code of the interface using KLIPS IPsec on 2.4.27 - star
  8 Oct 12:53:53 - [VPN Log]: change directory ' / etc/ipsec.d/cacerts'
  8 Oct 12:53:53 - [VPN Log]: change directory ' / etc/ipsec.d/aacerts'
  8 Oct 12:53:53 - [VPN Log]: change directory ' / etc/ipsec.d/ocspcerts'
  8 Oct 12:53:53 - [VPN Log]: change directory ' / etc/ipsec.d/crls'
  8 Oct 12:53:53 - [VPN Log]: warning: empty directory
  8 Oct 12:54:01 - ipsec0: no IPv6 routers present
  8 Oct 13:22:03 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:22:06 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:29:18 - hit KRIS_DDOS_TYPE = 18
  8 October 13:31:28 - hit KRIS_DDOS_TYPE = 18
  8 October 13:32:03 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:36:26 - hit KRIS_DDOS_TYPE = 18
  8 October 13:43:24 - hit KRIS_DDOS_TYPE = 18
  8 October 13:43:38 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:44:08 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:44:16 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:44:19 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:44:35 - hit KRIS_DDOS_TYPE = 18
  8 October 13:45:24 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:47:04 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:47:39 - hit KRIS_DDOS_TYPE = 18
  8 Oct 13:49:50 - hit KRIS_DDOS_TYPE = 18
  What is "hit KRIS_DDOS_TYPE = 18 '?
  Have seen a lot of post questions on this subject, but no one got a response.
  That this has something to do with intermittent freeze?

  More information needed to find the solution to the problem, just ask.

  Hi Steven, DDOS is Distributed Denial of Service. It is a flag of the attack. This is probably a false alarm.  But, if this is the first cause of your router, lock up, it's probably IDP engine failed or the KRIS has locked up.

  The cause is probably impossible to say. A few things you can try to check also

  • Disable the IPS and the monitor for logging and behavior
  • Disable the firewall of the router and the monitor for logging and behavior

  Among the possible causes can be

  • Condensation at the breast of your lines (coax cable ISP) or damaged wiring of ISP (broken wire, bad resistance)
  • Swap cables cat local LAN
  • Many flood UDP of LAN (this can hit counter DDOS on IPS or firewall)
  • You have a combination modem/router (from the ISP) unit packets does not present well

  -Tom
  Please evaluate the useful messages

• Why my Pc keep on crashing and freezing

  My pc crashes and freeze for no apparent reason, I've been on it just yesterday and all the few minutes that I was receiving messages saying Facebook.com, Facebook, Internet Explorer, Ftalk, Google do not react even imminent seems to be locked up and it is supposed to be compatible with all the windows, Facebook, gmail, yahoo and other cat.  go to troubleshooting and all I get is no detected problem and microsoft will close programs and inform me when there is a solution. I wouldn't mind, but I've had this problem before with Vista.  To try to combat these problems, I have upgraded to win7 and still have the same problems, even my apps are freezing and crashing, why and how stop what's happening? Thanks jackie

  Hello

   
  This error message you get when the computer crashes?
   
  Do the methods and check if this solves the problem.
  
  Method 1:
  I suggest to start the computer in safe mode and check if the same thing happen, check out the link:
  
  Advanced startup options
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
   
  If the problem does not occur in safe mode, you can configure the computer to boot and check if the problem persists. It will start Windows7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.
   
  Method 2:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: See step 7 of the connection to the computer to start as usual after troubleshooting is performed.
   
  Method 3:
  I suggest scan SFC (System File Checker) on the system and check if the problem persists. Follow the steps mentioned in the given article.
  
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 4:
  You can even check if you have found errors in the case where the Viewer, and if you find one, let us know the details. To open the event viewer see the link.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  
   
  I hope this helps.

• Print spooler crashes

  OK... very detailed and very annoying problem.

  File (multiple Machines, not just my own)
  Computers
  Computer 1 - Windows 7 home 64-bit
  2 computer - Windows 7 Ultimate 64 Bit family
  3 computer - Windows 7 Professional 64 bit
  Network printers
  1,2,3,4 - Samsung Clp-620ND printer
  5.6 - Samsung CLP-610ND printer
  Symptoms
  Randomly, try to print a document
  This requires a preview before printing, or create a PDF or JPEG printing will stop the print spooler.
  The print spooler crashes and the program and any other program that requires access to this ability will be block.
  (Odd Note: this also affects programs like Corel Draw creating a view)
  Stop the print spooler and clean the cache of the spooler, and then restarting the spooler does NOTHING.
  Stop the spooler will unlock programs but of course allow me to print.
  The ONLY and I mean the ONLY thing that works is set to zero.
  Since it's 3 work computers, restart anywhere from 1 to 4 times a day is not effective and a little boring.
  Time
  This started occurring immediately after an update of microsoft 3 months ago. I was unable to identify the cause of the update.
  Measures ALREADY taken.
  Remove the hardware and the driver / driver package from every single computer on the network / re - install the drivers (no luck)
  Remove the hardware and the driver / driver package from every single computer on the network / install different drivers (no luck)
  Use of Mr. Fix - it for the printer problems (no luck)
  Re-install WINDOWS (works until this bad update draws once again, and I can't just turn off update)
  Turn off the printer for print jobs queued (works but not good because that causes major problems with printing)
  Uninstall / install all the drivers as administrator.
  Turn off Port forwarding / share for each printer (no luck)
  Install the shared USB printers (no luck)
  Turn off windows Defender, I found an article that describes that an update of the virus definition started blocking the printer ports (no luck)
  I tried third party drivers (no luck)
  Stop the spooler / Clear Cache / Start Spooler (no chance does nothing, so please do not just copy and paste recommend this.) *.
  Change the print processor (no luck)
  Change the type of printing (PCL vs no PCL) No. chance
  Caveats
  All programs that do not require a preview before printing / or a creation of a PDF file to print will always be printer (IE Notepad)
  I'm at the end of my rope. My boss is constantly on me on this one, and having to constantly adjust driving me me crazy.
  Help!

  After obtaining

  The rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2
  Installed, the problem went from
  the print spooler hanging on the beautiful new error message.
  "You must select a printer before continuing."
  Diagnosis other reveals that windows refuses to acknowledge a connection to a network printer... even if they are displayed and marked as active.
  THANK YOU MICROSOFT.

• Windows Mobile 8 crashes and freezes

  Hello

  Recently I have experienced several stutters in my laptop. I just got this laptop about 3-4 months ago. I'm in Windows 8.

  Where these are important, here are the specifications of my laptop:

  HP Pavilion G4

  Microsoft Windows 8 Pro 64-bit

  Intel Core i7-3632QM CPU @ 2.20 GHz

  4.0 GB RAM

  Graphics Intel HD 4000

  ATI Radeon HD 7670M

  I don't know exactly what causes my laptop to freeze all of a sudden. A few freezes/hangs are relatively short: similar all about 10-30 seconds, but some end up being on an a minute or two, and when it starts to hang on for a very long time, I am forced to close manually my laptop, which I read it, is really not good.

  I tried to clean up the junk in my laptop, running various scans of malware and viruses, uninstall several programs, deleting a few unnecessary files, my "high performance" power plan in hopes of getting the CPU in my laptop to work more efficiently, and quickly turn off start. I have not tried the cold start again, because I afraid that I might do something wrong and eventually damage my laptop.

  Guys do you have other recommendations on what do I do? The gel randomly my laptop starts to annoy me a kind of not-so-good.

  original title: fairly new laptop is random crashes and freezes.

  I would try disabling all background jobs.  Here's how:

  (1) press on Ctrl-Shift-Escape to display the Task Manager

  (2) go to the Startup tab and disable all indicated

  (3) restart your computer

  If it persists, take note of what program you use to help limit.

• Transparent object Soft-edge - transformation of the printing process?

  Hey!

  I created an object with overlay of the multiplier parties, I applied transparency and a soft edge. Guess this will cause problems in the printing process.

  How do I turn?

  Greetings from Hamburg,

  IRIS

  

  Yes flattening of transparency is the right thing, but it should be automatic anyway when you put them.

  But those who put the option put should check first.

• Problem with Windows 7 Service Pack 1: the update process crashes during every start/restart

  Hello.

  I downloaded the SP1 for Windows 7 from Microsoft Download Center (I had the Ultimate 64-bit edition initially installed on my computer). I ran the installer and went through the process of updating until the first reboot. Since that time, my system is unbootable not. Windows 7 starts to run and then the SP1 update process runs and applies the changes to the registry and system files. After awhile, the update process freezes and I have to turn off the computer with the power switch. This is repeated again and again each time you start. He stops to date when he reached update number 117880 of 334835 or 334835 117930 (but not always these specific), and he is trying to change some registry entries apparently: 'operation 334835 (\Reg...) 117880 update application', this is what is shown on the screen below the still glowing Windows logo.

  In addition the secure boot mode, startup mode safe with networking, security console startup mode, last known good configuration options do not work. They all start to load but crash after a while (as if the same SP1 update process has been run in silent mode).

  I don't want to reinstall Windows 7 from zero and all the applications that have been installed. The ERD that I generated after my initial installation can not solve the problem, nor the Windows 7 can install DVD. It doesn't let me do an upgrade from the original DVD since it has not be started from the hard drive and then launched from within Windows 7.

  I looked in several discussions of the forum and found that my NTFS partition is marked 'active' as it should.

  I plugged my HARD drive on another computer and have access to its content.

  So is it possible to stop this automatic process and be able to start (in the original state of Windows 7)? At least to re - install Windows 7 via the DVD upgrade mode and then installing SP1 on a little further.

  Perheaps the log files from the SP1 update process could be useful, but I don't know where they are on the HARD drive.

  Thanks for your help.

  Yo_54.

  So is it possible to stop this automatic process and be able to start [...]?

  Hello.

  My startup problem is resolved. Now I can start Windows 7 and use my system again.

  I used the dism.exe tool back updates on hold through a wire found in the TechNet Forums: "C000009A update operation 334565 (\Registry\...) 119595 application error". loading SP1"(see link below).

  I launched WinRE with my Windows 7 installation DVD, selected my C: partition where Windows 7 has been installed, click on the button 'Next', refused to the proposed repair phase, and then chose the prompt for commands and typed:

  DISM.exe / Image: c: \ / Cleanup-Image /RevertPendingActions

  It took less than 15 minutes for the tool to the end I restarted my computer and waited a few operations update, then Windows restarted and more, and finally I was on my homescreen. After my connection, a dialog box been told that SP1 was installed (the winver.exe command showed that SP1 installed too).

  I think that now that I have completely will be re - install Windows 7 in upgrade mode, recheck all the pre-requisites for SP1, uninstall all language but English modules, uninstalling my anti-virus and anti-spyware programs disconnect you from the Internet and run the standalone SP1 install package. I'm going to see if the problem is persistent and keep you posted.

  But first I'll make an image of my C: drive system and store it somewhere safe!

  I found the solution through this thread in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/cad66cc7-9912-4cbe-898F-ad8ff9344308

  Best regards.

  Yo_54 (Johann).