Coating. CSC in MXF OP1a file

Similar Questions

• MXF OP1a not no projection in the "Format" drop-down menu.  I can't export MXF files.

  MXF OP1a not no projection in the "Format" drop-down menu.  There is a category of MXF OP1a in presets browser, but it is not active.  I downloaded the XDCam MXF presets, but cannot import them because the encoder cannot be identified.  How can I get MXF or XDCam MXF Op1a appears in the Format drop-down menu so that I can import the presets and export code MXF files?  Thank you...

  Hi beating Bits,

  The only thing I want to do is to incorporate a CSC file into an XDCam

  within an MXF.  If you could help figure me out how to do it

  codec to export available in TEA (or Prime Minister), I would be grateful.

  This is not supported natively in SOUL CS6. I'm sorry. Updated SOUL CC for this feature.

  Thank you

  Kevin

• Why keep MXF OP1a export fails?

  Hey geniuses! Got a puzzle for you brain game. I'm trying to export our first episode of graveyard Carz by using the network card: MXF OP1a XAVC I Class300 QFHD 50 p.

  This is the error I get inside media encoder:

  Movie compilation error.

  Import error

  Importer returned wrong result.

  Writing with the exporter: MXF OP1a

  Writing to the file: X:\S06_GRAVEYARD_CARZ\06_DELIVERY\FINAL UHD RENDERS\EPISODE_01\GYC_S06_E01_160709.mxf

  Around the time code: 00:00:21:20 - 00:00:21:24

  Reading with the importer: CFHD_MOV_Importer

  Reading file: X:\S06_GRAVEYARD_CARZ\02_ASSETS\1. PROGRAM GRAPHICS\LOWERTHIRDS\MARK WORMAN.mov

  Reading file type: MooV

  Rendering at offset: 21,400 seconds

  Component: CFHD_MOV_Importer of importing type

  Selector: 47

  Error code: 2

  According to the approximate time code that it fails, we have a lowerthird pre-rendered placed on top of the timeline. It is made with Cineform 4444 for alpha.

  My system:

  HP Z820 with 2 x E5-2670, 64 GB RAM, GeForce GTX 960, Windows Professional 10.

  All content source existing on the network fed by the little tree drive and is related to my system with a 10 Gbit Ethernet Adapter.

  And for the sake of clarity, this issue took place in the market. For example, two days ago, we were able to make the episode without any problem. This morning, fails every time in the same place.

  This happens if I mercury software read-only or if I use the GPU support.

  It also happens if I return on first or if I do inside Media Encoder.

  Finally, don't know if it's related, yesterday, first stopped to read some of my Quicktime rendered using PNG. He said that they did not have the audio or video stream. Quicktime reinstalling does not fix the problem. And cleaning of data bases and the cache has not solved the problem either. Strangely, Adobe After Effect could read and I re-renderings using Cineform and they charge very well.

  Hope you guys have answers. Thank you very much for your time.

  Seems that the problem has been resolved.

  It turns out that earlier I have had emptied my cache of media, first had not yet finished create new cache files and therefore could not make files that had no cache files created, causing Media Encoder crashing.

  Now that the media has be cached, it seems to be very well made.

  It is a real disappointment that I had to wait two hours for the cache of media fill.

• MXF op1a match source Media encode

  I am trying to use the source of the mxf op1a (wrap) match predefined in Media Encoder. I have a variety of raw materials of Gopros, XF305s and a few others. The preset fails systematically with images of Gorpro, and I had problems with some other sources also. I get the "video stream of the source file is not compatible with this preset. Please choose a different preset. "error.

  My question is: because I try only to use format mxf defined by default as a container, keeping the original material, it is - why am I compatibility errors? If I understand correctly, mxf can be used as a container for a variety of types of video, I fell on something that indicates it does not work for Gopro files or all the others, so what's the problem?

  Thank you

  Bransby

  It will not work for GoPro footage because our MXF exporter does not support the GoPro CineForm. Unfortunately, the preset should do a bit more than simply copy the stream to a new packaging. We must have a possibility to write this stream natively to the MXF format and currently, we cannot do this. If you have a feature request, you can ask that we support GoPro CineForm in an MXF. Once there is your workflow will work. Feature requests can be made here:https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• Export MXF OP1a with XDCAM HD 422 codec 1080i50

  Hello

  I use CC first and I want to export a movie as a wrapper MXF OP1a with 1080i50 XDCAM HD 422 Codec. I choose the XDCAM codec when I want to export is to one. MOV, but when I select the format MXF OP1a is does not appear in the list of codecs. Is there a way to do this in the first or Adobe Media Encoder, or what I have to come up with a workaround?

  Stuff/XDCAM MXF is somewhat alien to me, but I think that's maybe what you are looking for (?):

  Format: MXF OP1a

  Video Codec: XDCAM HD 50 NTSC (4:2:2)

  Command field: First superior

  It is an XDCAM HD 4:2:2 codec which automatically exports in 1920 x 1080 and with the order of the fields in superior first, it should be interlaced.

  Oh and I assumed that NTSC, but you would have wanted the PAL version of the video Codec.

• MXF op1a adds black bar in the lower third of the screen

  Hi guys,.

  has anyone encountered this problem?

  Coding in pretty much any OP1a MXF of HD will make a black extra bar for no reason to my files, during the encoding on the preview window, this bar is not there. I installed Media Encoder like 3 times and removed the preferences but still have the same question.

  I did only need go to XDCAM HD 50 50i @ 25 FPS PAL

  See you soon

  The number of cores CPU do you have? We recently discovered a problem where systems with more than 32 cores can cause this problem. How to test if this is your problem is to lower the number of processors in your system will use.

  1. open msconfig and click on the Startup tab

  2. click on the Advanced button

  3. set the number of processors on a lower number - I would say 24 as a starting value

  4. click OK and apply your changes

  5 restart your system and try the export

  If the problem goes away, then this is the solution to the issue. We invest things on our side and we hope it is resolved in a future release.

• Access denied when you try to access the folder CSC (location of offline files)

  Original title: instead of playing the files offline.

  I have installation folder for a user on the windows machine offline sync with an external drive of SAN. I noticed that the files do not synchronize with the SAN drive, so I changed the location to another drive of SAN. I disconnect old SAN offline synchronization and redirect the folder to the new SAN disk. I realized that he is a lot of files don't not sync from the old drive to SAN. but he was already disconnected. How can I find these files. I couldn't access the CSC folder in windows. Access denied even though I have the administrator rights on the machine.

  Help, please.

  This is the location of the file for files Offin on Windows 7. C:\windows\CSC

  Make sure you have full rights to the folder to access the files. If this isn't the case, follow the steps in http://technet.microsoft.com/en-us/library/cc753659.aspx to take possession of the file and the content it contains.

  I would also advise to go through http://answers.microsoft.com/en-us/windows/forum/windows_7-files/offline-files-access-is-denied/b1adc231-a4c2-4a5b-80b8-93269851febf for a possible solution.

  Let us know if that helps.

• Imported P2/MXF audio files - cannot apply audio effects?

  I use PP CS4 and imported some P2 footage. The files work and a lot of fun, but when I try to drag an audio effect to an audio track, nothing happens. I can drag audio effects on other audio tracks - no p2 - and they work fine. Not sure what the problem is. Any ideas?

  Thank you

  Kevin

  Are you sure that you are dragging stereo Audio effects on audio stereo?

  (or MONO, whatever the case may be)

  How many titles you use mxf files?  (You are aware there are 2 tracks, that you don't need.)  P2 recorded 4 tracks for each file)

• I want to combine the four audio channels of my mxf p2 files

  Hello!

  I remember reading somewhere on the web that it should be possible to combine the four channels of audio from a clip of first panasonic p2 and treat them as a single stereo clip.

  I tried to follow the tutorial that I found on creative cow, but the procedure seems to have changed since cs3 (the tutorial used cs3).

  Then I read in the CS5 help what should I do a right-click on a clip in the project window and choose 'Edit'-> 'audio channels. When I do exactly that, all the options are greyed out and I can't change my track format. I included a screenshot of the situation:

  

  It will only work if you have not yet used the clip in a sequence; Judging by the fact that the options are grayed out, I suspect that this is the case. How far along your edit are you?

• Record MXF MXF container clip

  I'm finishing a 52-minute program, with 20 short sequences shot in ProRes 422 (50 Mbps) and stored in MXF OP1a file. The package looks good on the release in Blu - Ray, but I need output for broadcast and the broadcaster prefer MXF deliberables. My Question: Is there significant loss of quality by saving 20 (with dozens of clips ProRes) MXF files to a final MXF container?

  Thanks for your comments,

  -Jim

  Good, then export the settings to use are

  • Format: MXF OP1a
  • Screening: XDCAMHD 50 NTSC 60i

  But I think that this is not really the essence of your query. On the contrary, as I understand it, here is the workflow you describe:

  1. change a series of sequences of 1 to 2 minutes
  2. the export of each chapter for the above parameters
  3. return the resulting exports in the BODY
  4. collecting the chapters in any order
  5. export the big sequence in the same settings.

  If I got that much right, then I would advise steps 2 & 3. Instead, nest the sequences of step 1 in a single sequence. This eliminates the generational degradation that worry you wisely.

  Of course, if you want a standalone clip for each chapter, so go ahead and perform step 2. Just don't make a round trip on these outputs in the project for further editing.

• Types of media supported by ProjectItem.refreshMedia)

  Hello

  Can any media type be updated using the ProjectItem.refreshMedia () function, or is - it only works for MXF OP1A file more?

  I tried to call this function on ProRes files on a NAS and they don't update unless the first is tabulated out and in again.

  Respond to both 1 and 2 is not via the public API, supported.

• some after effects 2015 questions

  I'm having some problems with after effects 2015 which I was hoping someone might be able to shed light on:

  1. when I Composition - add to the queue of media encoder - I get an error message AEDynamic link server, adobe media encoder is not installed (it is) I tried to reinstall once or twice and no cigar. I'm on PC and the software is installed on my D: drive not C:

  2. when exit MXF OP1a - file XDCAMHD 50 PAL (4:2:2), which is the format that I deliver to television stations, AE 2015 shows a shift of parameters and resizes pictures 1440 x 1080 - AE 2014 did not do that, so I'll have to go back to doing my final output 1920 x 1080.

  3 preview, audio not playing not for the first second or so when he was at first, which is a bit irrititating. What is worse still space does not stop reading again - I am wanting to stop the playhead to the point of his place, so I know the frame to beat match a cut, but space does not, and escape takes to the starting point, once more I had to come back in 2014 to make some images to the music of time

  3. often when I switch to an image, after effects give rise to the image, he keeps the image to the top of the previous point time I was on, pressing space seems to force it to make, but don't stop there when I hit space new

  The update of the corrections after effects CC 2015 (13.5.1) is available, which corrects several problems: http://adobe.ly/1Il5JYe

• Cannot import MXF OP 1a files

  Hello world.

  Recently I encounter this error. I try to import Media Encoder, .mxf, exported files from Avid Media compose 8.3.1 but Media Encoder gives an error.

  This is the 1st time something like this happens to me.

  I am using media encoder to convert my videos over the past years, and this is the 1st time this does not work with .mxf.

  Here is the report of the Action Recorder:

  Session record: 17/04/2015-16:31:25 - 16: 31:36

  Recorded as follows: 3, missed steps: 0, other errors: 0

  Operating system: 9600.17736.amd64fre.winblue_r9.150322 - 1500 6.3.0.0.2.48

  Step 1: Drag the mouse from the start on "Name (edit)" user en "CONSTRUCCIÓN SOSTENIBLE"

  Program: Windows Explorer, 6.3.9600.17031 (winblue_gdr.140221 - 1952), Microsoft Corporation, EXPLORER. EXE, EXPLORER. EXE

  UI elements: name, UIProperty, CONSTRUCTION SOSTENIBLE.mxf, UIItem, views, UIItemsView, Shell folder view, DUIListView, folder Layout component, element, Explorer pane, HWNDView, DUIViewWndClassName, CONSTRUCCIÓN SOSTENIBLE, CONSTRUCCIÓN SOSTENIBLE, ShellTabWindowClass, CabinetWClass

  Step 2: Drag mouse user end on "DroverLord - TabPanel (pane) window" in "Adobe Media Encoder CC 2014"

  Program: Adobe Media Encoder CC 2014.2, 8.2.0.54, Adobe Systems Incorporated, ADOBE MEDIA ENCODER. EXE, ADOBE MEDIA ENCODER. EXE

  UI elements: DroverLord - TabPanel window, window Frame DroverLord - class window, DroverLord-, DroverLord - class window, Adobe Media Encoder CC 2014, Adobe Media Encoder CC 2014

  Step 3: User left on "OS_ViewContainer (part)" click in "file import error."

  Program: Adobe Media Encoder CC 2014.2, 8.2.0.54, Adobe Systems Incorporated, ADOBE MEDIA ENCODER. EXE, ADOBE MEDIA ENCODER. EXE

  UI elements: OS_ViewContainer, DroverLord - class window, file import error, #32770, Adobe Media Encoder CC 2014, Adobe Media Encoder CC 2014

  Thank you very much

  Looks like MXF OP1a format is not enabled in your SOUL.  Is your trial or license expired?  If you have a valid license or on the basis of a trial period, please try installation and first Pro CC 2014 launch.  This can activate MXF OP1a.

• How to solve the problem with slow import mxf files exported from first cc?

  Hello!

  I'm working on the first update to 7.2, on 64 bit, windows 7, and I have a problem with the import of the MXF op1a (IMX 30 PAL) files that I exported from first.

  MXF Import blocks especially first, but when he's not, it takes a long time to import (10-15 min).

  I tried editing ContributeQ but again, it hangs / takes a long time and I can see only a black screen.

  I installed a new copy of windows on this computer with everything clean, but it doesn't seem to work.

  Is there a software patch or way to go around for this problem?

  Whenever you have trouble with this, reduce the number of influences of others on your system.  In this case, delete TotalCode and see if it behaves better.  If it does not remove the device from BlackMagic and uninstall the drivers.  If one of these steps will improve performance, check with the third-party manufacturers.  There may be a setting or an update is necessary so that your system works correctly.

• 60 GB tied up in CSC files clean using 942974 KB by fixit or make myself

  I'm dealing with a client on a domain SBS2011.  I have 60 GB tied up under CSC\Windows.  These files are files from a previous server offline.  I tried the registry method described in 942974 KB with no luck.  How can I get rid of them?  Can I take possession and remove them?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum