Code 10 for TI OHCI Compliant IEEE 1394 Host Controller-reinstallation does not start Windows XP 2002 Service Pack 3

Similar Questions

• Texas Instruments OHCI Compliant IEEE 1394 Host Constroller - cannot be enabled

  Texas Instruments OHCI Compliant IEEE 1394 Host Constroller (for i-link) is disabled and I have / windows can't activate.

  This is the first time I tried to use it and did not notice the errors to do with it in the past.

  Is this option enabled by default on new machines. The only thing I can think of that could have affected via my use is by Norton. In the contrary case, the laptop is a new.

  Someone else knows what - all assistance. Thanks.M

  May I ask what laptop you have, what OS you are using, and what exactly you want to do?

  Thanks ;)

• How can I get the Bus IEEE 1394 Host controller driver to show up in Device Manager?

  I try to activate my new Firewire Interface M-Audio Solo and I encountered a small problem.
  I recently bought a PCI card on eBay and I hope that it is not defective because even if the blue light on my Solo M-Audio lights when I insert it into the firewire port, I don't see this pop up on my computer screen. In addition to this, I discovered that the Bus IEEE 1394 Host controller is not installed on my computer (Windows XP)...
  Can anyone help please?

  Of my experience with the installation of port expansion cards (USB, Firewire, etc.), they always require facilities suitable driver to work properly.  The card comes with an installation disc, or have some sort of instructions for you inform to download the latest drivers for the device from the manufacturer's website?

• Ieee 1394 host controller Texas Equium A60-692 does not start

  Hello!

  I have a Toshiba Equium A60-692 about 2 years old. On rare occasions the above will install and also the network/ethernet card etc with it when it starts. But 99% of the time it fails to start upward.

  Tech from Toshiba tell me it's the CMOS battery, but time slept OK for the last week so maybe it could be something else. Other strange things are can only recognize the drive HARD to start from what IDE Standard is chosen in the BIOS options (Enhanced IDE option and I think only used normal overall, ups causes boot errors). Also a green screen with weird graphics on occasion. Also the speed of the processor can be reduced, as shown in the properties of my computer.

  Any ideas from anyone as worried of wasting time to unsolder the battery if this isn't the problem. Could this be a fault of the motherboard that is irreparable? I am a relative novice if need help someone here. This made me!

  Hello

  I think you might be right. Eventually he s a small part on the motherboard that could malfunction.
  If I m not mistaken the controller IEEE 1394 Texas Instruments could be the Firewire port and it s part of the mobo

  Welcome them

• Equium A60-692: Texas controller ieee 1394 host controller starts is not getting started

  I had unfortunately no response about the foregoing. I have Equium A60-692 and installed the new copy of XP.

  Before that, I inherited machine with power stuck on the password. Former owner had left standing for several months and said this seems to cause this not tentatives not this setting. I managed to use a rider based on the to remove, but now I think it was a symptom of more serious problems (but maybe I did something BIOS?)

  The controller seems to be when the machine is hot (strange). Fact that average anomaly map mother re ccomponent ventilation cold?

  Any help here, because I have tried everything I can.

  Have you set the BIOS to default settings?

  Hmmm... What about the question of hot/cold? I imagine that certain welded components can lose connectivity when the laptop is cold.
  In my opinion, you should install driver chipset when possible. Subsequently disable device firewire in Device Manager. I mean that this port is probably not so important to you. Isn t it?

• How to fix a conflict driver VIA? Via the Audio drivers and OHCI IEEE 1394 Host controller?

  Because this motherboard (ASUS P5Q SE2), uses VIA VT1708S 8 - channel High-Definition Audio CODEC.

  And my PCI Firewire card is also VIA - according to Device Manager. It is running Vista. If I connect my DV cam (which has a mini-port FW on it), then turn it on, the entrance FW in Device Manager says there is a problem. But if I disconnect the cam, then restart, the FW entrance goes back to normal. I've seen this prob before, where someone else had the same prob (but firewire was aboard).

  I tried updating the FW driver through the Device Manager, but there isn't a newer driver available. I know that the FW card is fine. It was in my mobo previously (P5Q SE/R), which uses the Realtek ALC 1200, 8 - channel high definition Audio CODE, without going through. So, any ideas on how to resolve this conflict?

  Looks like I found the prob / cause. ASUS drivers Via for the sound. The latest version from the ASUS site

  I uninstalled them so I use the audio drivers by default Vista. The sound and the FW work. I plugged the cam DV again, made windows sound and it connected right away. Must be something in the audio drivers causing the conflict (such as an address / IRQ entry or something in the inf file).

• Media Player does not start after loading Media Feature Pack for Windows 7 N

  I have installed Windows 7 Ultimate N and wanted Media Player 12, so I followed the instructions and downloaded and installed the Media Feature Pack for Windows 7 N and had no problems with the update.  When I start Media Player I get an error message that says "Windows Media Player is not installed correctly and must be reinstalled.  You want to install the player from the Microsoft Web site? ».

  I'm running x 64 and double checked the update I downloaded was for x 64.  I ran a scan SFC and he returned 100% complete without any problems.  I try next?

  Transfer your question in this forum, please: http://social.answers.microsoft.com/Forums/en-US/w7music/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• for some reason any my itunes on my computer does not start when I click on the itunes I have con

  even when I go to the start menu and click the itunes icon it starts

  Hello
  ·         Did you the latest changes on the computer before the show?
   
  You can follow the steps in troubleshooting the link and check if it helps.
  iTunes for Windows XP: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1421

• How can I upgrade my insttaled windows xp professional 2002 service pack 3 for windows 7

  How can I upgrade my Insttaled Windows Xp 2002 service pack 3 for Windows 7 Proffessional

  Hello

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Disk provided for 14 elements does not start?

  This is a first for me... the disc 14 items supplied does not start after insertion. Anyone had this experience with 14 elements or a similar product?

  Hi Joanne,

  I suggest that you try to download the Photoshop Elements Installer and activate with serial number when prompted

  Please visit Download Photoshop Elements | 14, 13, 12, 11, 10

  You can also view your serial number quickly ind

  It could be useful!

  Rayyan

• I tried to download the drivers for Photosmart 2575, but the download does not start.

  Now, I have tried with 3 different computers to download drivers for Photosmart 2575 but every time that the download does not start.

  I didn't get any message on the site, all that happens is internet explore just hangs and fails to what either.

  The drivers are for the Photosmart 2575 with Windows XP.

  Hello

  Try the following links to download software full of features for the 2575.

  Windows XP 32-bit

  Windows XP 64-bit

  Kind regards

  DP - K

• The specified service does not exist as an installed service. (Error code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  The name of your what appears?

  Error 0 x 80070424   See: http://support.microsoft.com/kb/968002

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• Trying to install Canon MP250 with a Windows XP Professional version 2002 service pack 3 OS.___Receiving several associated messages.___Fix error Printer Spooler app it yourself and Fix for me the MS site options have failed. ___

  My OS is Windows XP Professional version 2002 service pack 3

  Spooler subsystem app has encountered a problem and needs to close.

  Spoolsv.exe - application error
  the instruction at "0 x 00300000" referfenced «0 x 00300000» memory  the memory could not be "read".  Click ok to complete the program, click Cancel to debug the program.

  When I try to manually restart the print spooler, I get the error message:

  script error Internet explorer
  an error has occurred in the script on this page
  line: 1
  Char: 1
  error: unspecified error
  Code: 0
  URL:RES://c:\Windows\System32\mmcndmgr.dll/views.htm

  I tried all the fix it you suggestions on the site of MS (by removing printers, printers spool, drivers, driver files, editing the registry...)  Still the same problem resurfaced.  I even downloaded a registry cleaner to give a shot and no progress.  The only thing that I have not been able to do is, log in Safe Mode, because doing the newspaper in tells me that my password/login is incorrect (also a great mystery)
  I also ran all the fix for me programs offered - no. RESULTS

  I am extremely frustrated, I should share the printer and try another brand.  Who count? Help, please

  Hello Demars_will,

  Thank you for your message.  There are a few known bugs for this problem.  Try these two steps:

  Try first to this step:
  Put your XP CD in the CD drive.
  Click "Start" > click "Run" > Type EXPAND/r 'TheCDDriveLetter' \i386\SPOOLSV. EXE C:\Windows\System32 and press "Enter."
  Click "Start" > click "Run" > type SPOOLSV. EXE/install and press "Enter."

  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click the (+) sign next to Services and Applications, under Select 'Services '.
  On the right, locate and double-click "Print Spooler" > auto value startup > select 'Start' > click 'Apply and OK.

  A test to see if the spooler has begun.

  If this is not the case, click HERE for a registry change that may solve your problem.  There are a few different registry changes, I don't know if you have tried this one or not.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Please let us know if it did or did not help to solve your problem.

  Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.