Code 10 in Device Manager when you use the network adapter

Similar Questions

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• RoboHelp 8 runs slow when you use the network drive...

  I have several users at my company who improved RoboHelp X 5 RoboHelp 8. They report that when they are working on projects that are located on a network drive, RohoHelp running very slowly (which never seemed to happen before with X 5). I read on several forums that RoboHelp must be used with projects that are on the local drive, but I can't find any formal recommendation to Adobe about it, or have no explanation as to why the network drive doesn't work well, I found. At Adobe all officially commented on it, and no one knows why the performance of the network drive is bad? Is there anything that can be done to allow my users to keep using their network without the poor performance? Thanks in advance for any help you people can provide, I'm stumped.

  Hello and welcome, Robo_Newbie

  You're about to become real Robo_Oldie fast

  Your projects RoboHelp MUST live on a local drive. You can archive them on a network, but NEVER actually open and change while they are on the network.

  The two reasons most people incorrectly assume that they should be on the network is because you want to share with other authors and you want to back up in case your hard drive goes down. These are valid reasons, but it does not work because the. DPC (a cache of the Access database file) usually becomes corrupt - not to mention latency LAN-related performance problems.

  Until most of us do is either use the free RoboSource Control that comes with RoboHelp or establishing a manual routine to copy your current job to a LAN for more safety and establish a routine with the other authors who will be working on what, when.

  Sorry to break the bad news. That is the reality.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  www.showmethedemo.com

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!

• Need to reset the button by default when you use the structure of the event?

  When you use the buttons with a mechanical action "releasing lock" to only trigger the same structure with the same 'value has changed', the button does not jump upwards as you would expect.  I can get to behave as I want by adding a "default reset" invoke the node, but this seems somewhat exaggerated.  Is there an easier way to get the button to jump to the top after pressing on?

  The button will reset once it is read by the code. This means that the terminal is inside the structure of the event. If you move outside the terminal, it would read only the beginning of the race and then never and it will not be reset.

  If the terminal is learn the structure of the event, it is read by the code (even if it is not connected to anything) and it reset as soon as the event has a chance to run.

• When you use the feature of period of Parental controls for my child's account, the session is saved, and although very convenient for the user, it's boring for the parent. How can I disconnect this acct when it expired already?

  When you use the period of Parental control feature, acct of my child receives the 15 min and 1 put min warning, and then the closure of the session. However, any Web site that it has a really annoying music keeps playing even when I connected under my account admin the only way I can disconnect the acct with Parental control game is to restart my whole machine. Is there another way to disconnect the user standard acct with this feature of limitation in time game? THX.

  Hi marion_librarian

  Thank you for using the Microsoft Answers Forums!

  This is the problem of design, the session remains active in the background, however, so the next time they connect, they can pick up where they left off without losing any of their work.

  In case if you complete the program, there is no these settings in the parental control to close the program, you can disconnect the program using the Task Manager.

  Check the link for more information:

  Explore the features: Parental controls:

  http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx

  Set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  NOTE: When you log in as an administrator you can connect to the wide of other users. Follow these steps to log on to the account with Parental control and/or any other user.

  1 click-right on the taskbar and open the Task Manager.

  2. Select users

  3. right click on the user name you want to disconnect, and then click close session.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Can I turn off notifications by e-mail of Echosign when you use the API

  Hello

  I am trying to create a personal widget using the EchoSign API and I noticed that EchoSign sends an e-mail to the user with the signed copy after that that they have signed.

  Is there a way I can disable all notifications by e-mail of EchoSign when you use the API?

  Please contact support, or the Manager of your success.

• When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box, to an area of the page... rather than through a long straight line...?

  When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box on a specific area of the page... instead of the text box is in a long straight line...? I do not see there is an option or the ability to do so, just want to confirm.

  Improving the management of multiple line text fields is in our plans, but for now, you need to add manual carriage return (Enter).

  Thank you

  Josh

• Possible to force overwriting of files when you use the method. render()?

  Hello world

  Hope all are well.  I looked at the documentation available in the Guide scripts of the effects after, but could not find any information on this.  Is it possible to force overwriting of files when you call a rendering method. render() in a script?  I know there is a constant that can be used to force overwriting of .aep project files when you use the method. close() on the app object.  For example, it's documentation:

  Action to run on close. A CloseOptions enumerated value, one of:

  CloseOptions.DO_NOT_SAVE_CHANGES : Close without saving the changes. CloseOptions.PROMPT_TO_SAVE_CHANGES : Whether to save changes before closing.
  CloseOptions.SAVE_CHANGES : automatically record on the end.

  Is there something like this for managing conflicts of files during the rendering process?

  Thank you
  Arie

  That's what I do. It seems to work:

  app.beginSuppressDialogs ();

  myProject.renderQueue.render ();

  app.endSuppressDialogs (false);

  Dan

• SpeedGrade hangs whenever it is launched stand-alone and never works when you use the direct link to first.

  SpeedGrade hangs whenever it is launched stand-alone and when you use the Adobe SpeedGrade of first Direct link it closes only first. He never try to open same SpeedGrade. All effects have been removed and I managed with this in the past using CC, it is a new problem. Any ideas?

  FxFactory plugin looks at the origin of the crash. Please update the plugin, which should solve the problem.

  Thank you

  Fran

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• Error returned (sometimes) when you use the tag < cfxml >

  I have a problem when you use the < cfxml > tag, its seems error when I try and view the XML over a certain length, because it works for some of my folders and others do not.  Is there a known displaying stuff in the cfxml tag size limit?

  Here is my code, I don't know how to move forward on this issue. Well, any help would be apprciated.

  Right.

  It is therefore being truncated when it is read in the DB.  Nothing to do with CFXML.

  Looks like it is hitting the size of the Long text buffer (which by default is 64 KB).  Increase this value (in your DSN settings, advanced).

  --

  Adam

• Referential integrity when you use the account of APEX

  Hello
  I use authentication userid APEX in the app I am building. I would like to use the username in the table as a foreign key. However, given that the user ID is managed by APEX and not in a table that I created, I'm confused that how can I configure a FK on user name when you use the authentication of the APEX.
  I have to configure my own user table if I want to create FKs on the user name?
  
  Thanks for your help!
  -Reid

  Hey Reid,

  Yes, create your own table to the user. Make a function that takes the user name and password and returns a Boolean value. According to your criteria it should return TRUE for authenticated users and FALSE otherwise.

  Use custom authentication. Make a copy of the plan of Application Express users. Change the function of authentication - built in - to your own function. Read this prudent property by clicking on the label.

  The table user may be related to table all you want with a foreign key.

  Kind regards
  Learco

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software