Codec 3000 + CUCM 8.5 + 7975 G

Similar Questions

• Cisco 7975 XML user interface

  Hello

  I have a full 500 CTS with CUCM 6.1.2. I can't use the MIDlets UI on my phone 7975 as usable only for version 7.0.2 CUCM MIDlets and above. That's what I got from all the documentation. So I have to use to operate the UI XML on my Cisco 7975. But I failed to find any document on how to do it. Appriciate any help on the configuration of the user interface XML for ip phone 7975.

  Thank you

  Subash

  Hi Philip:

  Under the locations section of external data for the IP phone attached to your codec, enter it below to the following parameters:

  Authentication server:

  codecIPaddresshttp://: 8080/authenticate.html

  Services:

  http://codecIPaddress:8080 / services.html

  Inactive:

  http://codecIPaddress:8080 / Idle.html

  Idle time (in seconds) timer 1

  Ensure that you have no configured/Subscriber midlet to the IP on the CUCM phone; also ensure that your 500 CTS is not ongoing enforcement 1.7, midlets are required for CTS 1.7.  You may have to restart the phone IP and codec of CUCM, once you have configured the above.

  HTH

• SigmaTel High Definition Audio CODEC is not compatible with Windows 7

  SigmaTel High Definition Audio CODEC does not work with windows 7. I tried to get my laptop to detect the hardware and it doesn't seem to be compatible with windows 7. I tried to update but without the cell knowing that its here I can't update. What can I do? Having no sound on my laptop, it is so quiet...

  Exactly the same thing happened to me. I upgraded my computer dell laptop of Vista (32) Windows 7 (32) on 24 December.  My codec high definition audio sigmatel could not be found since then.  This morning, I got fed up and found the free codec download sigmatel high definition audio...  Downloaded and my sound is working again...  We think just too hard I guess.  Hope it will be useful to you.  Good luck.

  http://download.CNET.com/SigmaTel-high-definition-audio-codec/3000-2110_4-173629.html

• Sound and devices Audio Panel indicates "no audio device", the command.

  No speaker in the status bar icon.  With the help of XP, SP3.   Occurred after reinstalling XP.  Use of motherboard ASUS with integrated Realtek.  Realtek version 5.10.0.5793 appears in the Add/Remove list, but not in the list of device management (seems like it should be).  Reinstalled the drivers repeatedly.  Notably, there are similar comments on this forum related to this topic.  I have read and tried all possible remedies linked, unfortunately without success so far.  Despite this, I hope that somewhere out there, there is an answer to this problem by replacing the computer.  Thanks in advance for any thoughts that come this way.

  I tried both methods but unfortunately none worked.   However, I have had success using the IDT High Definition Audio for Windows XP drivers.

  http://download.CNET.com/IDT-high-definition-audio-codec/3000-2120_4-197119.html

  Have been uninstalling all audio drivers on my computer.  The IDT program ran.   The problem has been resolved.  As my noise problem has been associated with a hardware configuration that contained the sound elements (Realtek) on the motherboard and not a sound card I do not know if this will help in similar cases of questions "without sound".

  Repeat for others.   I had no volume in the notification area icon, sound Contol Panel indicated I had no audio device, no sound driver Realtek was posted in the section of controller of sound, video and game in the Device Manager. It is after that the pilots received Realtek had been loaded.

  Thank you for your response.

• Update of telepresence

  Dear Sirs,

  our clients have three CTS-3000, CUCM Cluster, Manager of CTS, CTMS.
  CTS-3000 - Firmware version is 1.4.3.
  CUCM - Version is 5.1.3.2000 - 3, the material is MCS-7825-H3.
  CTS Manager - Version is 1.3.1.0 (460), the material is MCS-7835-H2.
  CTMS - Version 1.1.0.0 (254), material is MCS-7845-H2.

  Customer has a Cisco warranty. The customer now wants
  upgrade of the solution up to 1.6 version and CUCM up to version 7.1.

  1. the following (after 1.4.3) versions of firmware are available for the CTS-3000:
  a. 1.4.7 (2229);
  b. 1.5.1 (2082).
  c. 1.5.10 (3648);
  d. 1.5.11 (3659);
  e. 1.5.12 (3701);
  f. 1.5.13 (3717);
  g. 1.5.3 (2115);
  h. 1.6.0 (3954);
  i. 1.6.2 (4023);
  j. 1.6.3 (4042).
  Should install us all versions of firmware under the instruction of one or
  There is a recommended update sequence?

  2. the following versions of software are available for the CTS Manager:
  a. 1.3.2 (466);
  b. 1.4.0 (279);
  c. 1.5.1 (420);
  d. 1.5.2 (423);
  e. 1.6.0 (220);
  f. 1.6.2 (64);
  g. 1.6.3 (113).
  Should install us all versions of the software under the order by one or
  There is a recommended update sequence?

  3. the following versions of software are available for Community trade marks:
  a. 1.1.1 (30);
  b. 1.1.2(6);
  c. 1.5.0 (222);
  d. 1.5.1 (2);
  e. 1.5.2 (21);
  f. 1.5.3.12;
  g. 1.5.4(4);
  h. 1.5.5(1);
  i. 1.5.6(1);
  j. 1.6.0 (108);
  k. 1.6.1(2);
  l. 1.6.2(3);
  Mr. 1.6.3(2).
  Should install us all versions of the software under the order by one or
  There is a recommended update sequence?

  4. what sequence of update should be used?
  Firstly the CUCM, then CTM, Community trade marks and the CTS-3000 to last.
  Or there are more good sequence?

  Thanks in advance.

  1. you can go directly to the latest version 1.6.3

  2. If you want to go 1.6.X you must update in 1.4 first and then do a direct to 1.6.3 upgrade once you run 1.4.0

  http://www.Cisco.com/en/us/partner/docs/Telepresence/cts_manager/1_6/Admin/ctm_instalCTS_M.html#wp1080226

  3.

  The upgrade to version 1.6.0 CTMS

  When the upgrade to CTMS version 1.6.0 you run CTMS Release 1.1.2 or later. If you are running a version prior to CTMS Release 1.1.2 update to version 1.1.2 CTMS before the upgrade to CTMS version 1.6.0.

  http://www.Cisco.com/en/us/partner/docs/Telepresence/multipoint_switch/1_6/release/notes/CTMS_1_6_RNs.html#wp96444

  4. I first put the CTM CUCM, then CTM and last endpoints

  HTH

• Disable Cisco on CTS system start/end call tones

  Does anyone know how to disable the Cisco tones on call start and end on the CTS systems. I have looked everywhere in CUCM and don't see any type of setting for her thus done quick search via the web. When I'm testing, I'm so tired of listening to the tones over and over again and the volume control does not seem to help.

  Thanks for all the ideas.

  Tom

  Hi Tom,

  The tone at the end of the call can be enabled or disabled by the parameter of "call termination enable ring" in the codec in CUCM configuration. Documentation speaks of this setting controls the ring at the end of the call, and I'm not aware of any call origination tone control framework.

  Kind regards

  Antonio.

• Can we replace the primary codec CTS 3000 with CTS 1000 codec

  Hi all

  Please correct me if I'm wrong.

  Physically CTS 1000 codec and CTS 3000 Primay Codec is the same air, I would like to know what is the difference between the two codecs.

  Suppose if I replace the main codec CTS 3000 with codec CTS 1000 it'll work?

  The difference is only between the firmware... ??

  If I try to download the firmware CTS 3000 in CTS 1000 codec does?

  Also add codec CTS 1000 in CUCM as Codec CTS 3000?

  Kind regards

  Nikhil Jayan

  Nikhil,

  Are the only thing you need to know about 2 codecs GEN 1 or GEN 2. On the GEN 1 all the microphones connect to the primary codec. On the Gen 2 microphones connect through the audion expansion area. You can see the difference on the codecs on the Gen 2, you can see 1 connection for the Center microphone and a connector square for the cable to the AEB.

  Other codecs are exactly the same. Endpoint gets its configuration file in Communications Manager. So once go you MAC address and restart the endpoint it will go the new configuration file. If you use a CTS Manager, you will need to go into the Application user in the CUCM and move the MAC address of available for controlled devices. You will then need to make a discovery of the room in the CTS - Man.

  The firware for both codecs are the same.

  I hope this helps out.

  JD King

• Using the Codec C90 Tandberg T1 with CUCM

  Hi all

  is it possible to register the Codec C90 a Tandberg T1 to the CUCM?

  We are currently trying to save one, but the State of the record is still "failed: 485 ambiguous." The CUCM tells us that the record is rejected. Is it possible that the problem is the product ID, which is "Cisco Telepresence T1". We can only select C90 Cisco CUCM on. If it does not, and the device is rejected.

  Is there a way to fix this? Perhaps saying the C90 is therefore more a T1? We have already tried to remove all optionkeys, but there is a 'unknown' type which cannot be deleted. Could this be the key T1?

  I hope good answers :)

  Kind regards

  Jannik

  Looking at the matrix unit CUCM package compatibility, TANDBERG T Series end points are not supported, IE: are not.

  If you do not want to use the codec C90 T1 of the TANDBERG itself and not the Q1 as a whole, you may be able to change the product key for the T1 be a C90 asking new license keys.  See t3-c90-codecs.

• External calls to CTS-3000 using CUCM

  Hello

  I'm trying to configure the scenario below, and I just want to know if it is supported

  We have a system of telepresence CTS-3000 registered to a CUCM dedicated just for telepresence units. We have ICT trunk between telepresence CUCM and CUCM have registered phones who works for inter-classes calls.

  When I ring a number external unity of the CTS, the call gets initiated and falls straight lines. I registered an IP phone to telepresence CUCM and I can make outgoing calls.

  On newspapers of the CTS, I see a "call ended due to the distance point of endpoint resource unavailable ' error.

  Thanks in advance

  If you try to call from your CTS, through ICT devices on CUCM telephony?  What are the endpoints you are trying to call?

  CTS endpoints use telepresence Interoperability Protocol (TIP) for call control.  Only endpoints speak advanced the CTS models are CTM bridge.  Video normal Cisco phones do not TIP (including 9971, 7985, CUVC, etc.).  Audio only phones also do not speak the TIP.  Basically, the CTS rooms can only call each other without a MCU such as Community trade marks or the server of telepresence from Tandberg/Codian.

• CTS500 IP Phone 7975 cannot register to CUCM 8.0

  Hi, I am new to the area of cisco in video conference, so I found a problem in studiofor our company lab environment,

  I have configured CUCM with version 8.0 software, and CTS - 500 can register as an endpoin SIP.

  For example, CUCM with IP 192.168.30.2, while that CTS-500 with IP 192.169.30.7

  However, the IP Phone 7975 is connected to the CTS-500 with PoE, and he can't join CUCM.

  I'm checking the MAC address of the IP phone in CUCM configuration to ensure that there is no typo errors,.

  To trouble - shoot, I get the IP address of the IP Phone by switch CDP, and I found that it is not identical to CUCM.

  For example, the number in the directory is different with the CTS-500.

  Help, please.

  Thank you

  Ben Lai

  It is best to configure the and RTC with ip static but not essential

  Check the option 150 in your configuration of dhcp if his, which provides the cm ip right

  Once the registry phon he must share the same line with the cts to work

  Also make sure u got the medlit service configured properly too

  Good luck

  Sent by Cisco Support technique iPhone App

• Updated codec C40 to the latest version of the TC software - use CUCM?

  I need to upgrade our C40 codecs to patch the vulnerability of Bash.  Currently they all run TC5.1.3.292001.

  I noticed a few options in the download options for the included C40.

  (1) Non-crypto and crypto software.  The way I read it, this refers only to the software itself, not any kind of codec options?

  (2) "to be used with CUCM"-I'm not sure how to check it. "  I inherited these devices with no documentation and the original seller is pretty useless.  Is it possible to check?  We use CUCM, but to my knowledge, our phones can't integrate directly with the TP system (we have customers MOVI for this).

  Stuart,

  I don't think that Cisco has published a version of TC software that has the fix vulnerabilities of bash.

  The non-crypto software has none of the feature SSL on it - IE. signaling/media figures. Usually goes with cryptography is the safer bet unless you're from a country that has to import restrictions.

  CUCM - if your termination points are saved to CUCM, then you must use the version of the file CUCM. It will be uploaded to the server CUCM himself by going to install/upgrade the Administration of Cisco's operating system and restart the TFTP service. In this way, the file will be pushed down from the server when the codec is reset.

  For the non-CUCM, you use the other file and download the .pkg directly on the codecs. It seems to me that you have a VCS based so the .pkg file deployment, this is what you will use.

• Codec migration option multi-site since VCSC to CUCM system key

  I have some general questions about this scenario

  If a Codec has multi-site option key and entered a VCSC and is migrated to a CUCM system saved:

  A.) multi-site option button will still be available for use on the Codec?

  (B) can plan for TMS to it, and no need of a conductor based GST to serve the meeting?

  You don't mention what version of endpoint and software, however, the endpoint can use the Multisite option even after it has migrated to CUCM, see sx20-cucm for reference.

  Endpoint can also be using TMS planning conferences that are hosted on microcontroller embedded in endpoint as long that you have added in TMS, please refer to Guides Admin TMS on how to add endpoints CUCM managed in TMS.

• What is the difference between codec primary and secondary codec in cts-3000?

  Hello

  I'm a novice on telepresence. This community is only a place to resolve issues for me.

  What is the difference between codec primary and secondary codec in cts-3000?

  I know the primary function of the codec. but I don't know exactly of secondary function of codec.

  Help me please.

  Hello

  On a CTS 3000 system, you have 1 codec primary and secondary 2 codecs. Secondary codecs are responsible for the camera left and right and view the connections. They communicate the main codec via an Ethernet cable.

  Here is a guide to the installation of a CTS-3000 so that you can see the routing of cables.

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/cts_3000/guide/3000_assembly_guide/CH08_Routing_Power_and_Signal_Cables.html

  In addition, if you are interested to learn more about the telepresence as of last year, Cisco introduced the video CCNA certification track. Maybe it's something you are interested in.

  https://learningnetwork.Cisco.com/community/certifications/ccna_video

  PEI

• CUCM 8.6 and Codec Design

  I CUCM 8.6 KT and 5 branches, I'd use G711 inside the HQ (Lan) and G729 between Headquarters and branches.

  Any help will be appreciated

  Under ephone.

  Chris

• Codec H264

  H264 Codec - I understand that WMM and WMP requires this codec to play/edit the HD of my new camera (Canon 500 d) files. I searched on the web and still cannot locate a reliable or which seems to work fine. Can anyone help?

  This one works well for me: http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html?tag=mncol.