Codes of light on a HP

Similar Questions

• Canon mp250 5200 error code, yellow light that says alarm starts flashing.

  Original title: canon mp250 5200 error code

  I downloaded the drivers and get an error number I think it is 5200 on printer, the yellow light indicating alarm flashes?

  I tried the evry thing. Can anyone help?  Thank you

  Hello
   
  1 have. what troubleshooting measures you tried so far?
  2 do you have an error number 5200 while installing the drivers?
  
  Method 1:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Method 2:
  This error is that your used ink is full.
  Reset the printer. Press the reset button and hold it while it is. Then, turn it on and press the reset button twice.
  It will go into maintenance mode. Here you can reset your used ink pad. Just follow the instructions and press reset 4 times. Turn on your printer and turns off again and see if it helps.
  Note:  To learn more about the method 2 check the printer documentation to determine the steps or contact the manufacturer.

• How can I fix error code 0x0005FBB6 and all the lights flashing?

  DeskJet 3000 j310 prints one page then stops all illustrates the code 0X0005FBB6 light flash and error on the printer screen.

  I use PC - BSD 9.0

  How can I fix it?

  Ken

  The problem appears in the file I tried to print.

  It was a hand drawn plans pdf file, the first page is a typed page printed but printing the order in a panic when he tried to print the hand-drawn pages.

  Ken

• Red line flashing light under the X 3000 HP mouse scroll wheel

  The lack of a better adequacy, m post my question in the laptop hardware section.

  This is the kind of a silly question, but for some reason my mouse HP X 3000 wireless decided to Flash a red color flashing line below the scroll wheel. This mouse HP documentation is thin enough, impossible to find the meaning of this code of lights in my mouse"support page.

  Logitech hardware, this indicates that the battery is very low. It indicates in a X 3000 HP mouse?

  It seems to work normally, but it is followed very precisely my hand movements and do not miss a single click.

  If anyone knows, please reply.

  Thank you.

  The first thing I would have suggested, it is change the battery.  On all the mice I've owned as a flashing red light / line means that the battery is low, as you said.  I can't find any information on the cause, otherwise.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• InDesign CS5: Why hidden codes change from blue to red?

  InDesign CS5: I have a document with page 20 indesign file that is part of a book about InDesign document/chapter 23. Hidden codes are light blue through chapters 1 and 2. Then, in the middle of Chapter 3, at the bottom of page 10, hidden codes became Red until the end of this chapter. The next chapter contains the solid blue hidden codes. What is the Red mean and what I need to do to correct this. Thank you.

  Looks like this block of text that contains hidden characters is on another layer.

• OR PXI-6289 Digital Output Solid State Relay

  Hello

  I try to control a mechanical solenoid pull using a relay of sold State connected to my PXI-6289. Currently I have the CRDD connected to Port 1 line 4 and use the code provided here http://zone.ni.com/devzone/cda/epd/p/id/6411 . However, every time I run the code, the light on my SSR (wired to show the logic works http://www.adafruit.com/products/268) does not illuminate indicating that there is no signal to be output. Any help in this matter would be much appreciated. If additional information is needed please let me know.

  Best,

  Brad

  Nevermind, problem solved it was just low power.

• Executable file cannot create files

  I created a VI that creates files in its operation. It downloads files via FTP and also creates a config file, if it does not already exist.

  When I ran the VI without building in an application everything has worked well. Now that I have built in an application, he cannot create any files at all for some reason any.

  The strange thing is that it doesn't throw any errors. Part of my application FTP receives a list of files in a directory through then a loop using the 'get' vi file it draws in the FTP in the Toolbox of the internet. The for loop to zip right through the list of files without having to download them, but acts like he did download them. Its supposed to wait until it downloads or expires. As I said though, nothing in the VI can create all files. I'm trying to create a configuration file, but it is not created.

  I am even dealing with the case where when I use the 'VI path.vi current"from a stand-alone application, it will send a path like c:/directory/myprogram.exe/currentvi.vi. I analyze it to the directory of the real executable without a hitch.

  I am running XP, not vista, so it's not like I need to run it as an administrator or something. I'm puzzled. I hope that I have adequately described the behavior of this problem for you guys.

  Hi Rex,

  before installing all the drivers (unnecessary):

  Have you checked all the wires of the error? Especially in the creation of your program file section? All messages of that?

  Can you show your code (a light at least version)? You can replicate the problem with an example vi?

• CQ62-209wm: CQ62-209wm turns on but does not rest on the black screen

  This same question was asked in 2013 but was never answered. The proposed answer was to run diagnostics on the hard drive and memory. My laptop has exactly the same problem and I have the tests. Everything going smoothly. I finally decided that the video was out so I had a bad mother. Well, I ordered a new card mother and new battery new memory. I pulled the heat sinks cleaned the CPU, cleaned the fan and cooling fins, and then replace all. Guess what people, it is still the same as before with these new rooms. No beep codes are generated, without sounds, etc. What happens is the caps lock light flashes approximately every 3 seconds and the WiFi symbol stays orange. He never blinks. I found the light accidentally code page, but there is no reason to corosponding between codes of light and the flashing cap lock key. It will just sit there and blink as long as you leave it or until the battery going dead comes first. This same problem has been around since I found a multitude of messages about this and this is not only a model. Forums in the world have this posted on them.

  So how about it HP engineers. Is there anyone of you ready to take on this problem and tell us how to solve this problem once and for all? I'm tired of having a computer that works only when it wants too. I want both of my laptops CQ62-209wm to work. I am able to get laptops to start completely about 35% of the time. In order to make their work I remove the battery, plug in the power supply, replace the battery and then try to start it. Sometimes it works most of the time, this isn't. I'm starting to suspect a possible in the power circuit problem, because it is the first laptop I've ever used or owned not illuminate if there is no battery installed.

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• Windows 8 "There is a problem with the driver for bluetooth hands-free audio"

  There is an X symbol by the sound icon, when clicked, it shows "There is a problem with the driver for the audio blue tooth hands-free". Troubleshooting has not been set, said that there is a bluetooth hands-free audio driver problem. In addition, when you look at the audio in Device Manager, error code 19 lights during all the points listed under ' audio, video and game controllers ".

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted audio driver or settings.

  I suggest you run this Microsoft fixit and verify.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  I would also say that you uninstall and reinstall the sound drivers under "Audio, video and game controllers" and check.

  To uninstall the driver, please follow these steps:

  a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.

  b. Click to enlarge "Audio, video and game controllers", right click on the device, and then click Uninstall.

  c. restart the computer.

  Now, reinstall the drivers from the computer manufacturer's website and check the.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Latitude D420 does not illuminate

  Hello

  My D420 turns off suddenly to the after no previous problems. Now it not at all lights when you press the button. It's the same thing with power supply battery or sector.

  No light - not totally dead nothing!

  I am a fairly competent hardware engineer, but don't know where to start with this one.  Any help gratefully received.

  TIA

  Bob

  Hi Bob,

  There are a number of steps, we can try to determine exactly what is happening with your system. If you can answer what follows below, this will help us to know where the problem lies:

  1. Remove the battery from the system - on the battery itself, you should see a button next to the LEDs and 5 LED. Please push this button and tell us what light, as appropriate.
  2. Please check the plug of the AC adapter and connector AC adapter inside the laptop for signs of damage. Please pay particular attention to the plug of the AC adapter - this should have a PIN in the middle that must not be bent or damaged in any way.
  3. Please connect your adapter on the sector. On the adapter, there should be an LED. Does the LED light up when it is connected to the power grid?
  4. If the adapter LED turns on when it is connected to the mains, plug the power adapter to the system. The LED on the AC adapter out or flicker?
  5. Just to double-check, please try turning on the system using power adapter only. You see everything light up in the system?
  6. Same as step 5, but please use the battery only. Again, you see everything light up in the system?
  7. Please connect the power adapter and the battery to the system. Then try turning on the system by holding down the FN key and pressing the power button. This can give you a code of lights where the lock light LEDs are (Num Lock, Scroll Lock, Caps Lock). Please tell me which of these LEDs light up, if necessary.
  8. At this point, we would deprive the system to its basic components. If you are happy to do this, please ensure that you remove the AC adapter and the battery from the system. Please remove the following components:
     a. memory DIMM
     b. the card (if installed) wireless
     (c) keyboard.
     d. Bluetooth Module (if installed)
     e. hard drive
     f. optical drive
     g. cable of the LCD Panel of.
     If you need instructions on how to remove these components, please consult the owner's manual here:
  9. With above removed components, please plug your power adapter and press the Microswitch to the power button. You can see the lock light LEDs lights up, please note that light up, if necessary.
  10. If Lock LED lights, please reinstall each component individually and turn on the system after that each component is reinstalled. Note that light up, is all.
  If you can try the above, it would be a great help. Thanks again, hope to hear from you soon.

• Dimensions of the image in CSS or HTML; or a little of both?

  I ask this because I have a site with several pages with small images that illustrate the text is floated to the left or to the right.  I want each image to the same width, but not the same height.  I want to use the CSS even or insofar as possible, with each left or each image on the right.

  I usually try not to declare the width in the HTML, but put it in the CSS.  Y at - there much difference?

  A compromise might be to declare the width in CSS and height in the HTML code.  That seems OK, but I just want to check if there is a good way to achieve what I'm after.

  Thank you

  Martin

  martcol wrote:

  Hello PZ

  I guess that the question is is not should I put the width/height but what would be the most economical solution in my situation.

  I have 4 small images on my page.  Two float left and right two floats.  All images have the same width but of different heights.

  The pictures on the left are in a

  and the law in their own so that I can have one rule to the left or right with the float, but I have different rules to cover the height of the image.

  So I can take the width of the image in the HTML code and which cover in my CSS.  I had always assumed that the best way to go was to keep your HTML code as light as possible.  If I cover the width of the image in these two rules, I have either:

  (1) write a rule for each image cover the unique height and put an id on each image in the HTML code

  (2) return all statements of height/width in the HTML

  (3) put the width in CSS and height in the HTML code

  Or go drink a glass of red wine!

  Martin

  Hmm... for me, I would like to always the width and height in the html code. I think you can become a little obsessive, trying to keep the HTML as light as possible. Also if I need to change the width/height of the image at any time its easier in the HTML to go look in the css rules.

• Tecra M9 - no power orange light error code sequence

  Hello

  I have a Tecra m9 laptop and when I try to turn it on, it blinks with a light orange in this sequence:

  6 short flashes, short 1 long blink, 1 blink, a ditch, and then it repeats.

  Does anyone know what is the problem?
  Any advice would be greatly appreciated.

  See you soon.

  What you see flashes code. The flashing provides an error code. Short means 0 and 1 long.

  The hexadecimal code can be read by the service partner. The blink code will be sent when the microcontroller detects a problem with the power supply. Unfortunately you can not do anything alone. Contact the closest partner in your country and ask for help.

  All you can try right now is to disconnect battery and start the laptop with AC power only.

• G62 110SS flashing light codes?

  I have the following problem:

  When I plug in the adapter without the battery, the led next to the power Jack is white. If I press the power button, power jack led blinks orange three times very quickly go back only to stay white. If I connect the battery, when I plug the AC adapter / CC, dc jack light lights up white for two seconds, then past to orange for a few seconds only to start flashing orange. When you press the power button, light blinks orange three times then continues flashing orange. Power led does light, not even blink.

  Needless to say that the laptop lights, not even pressing and holding the button for 30 seconds isn't going to help.

  Anyone had this problem before?

  I should mention that the laptop has been a powerful blow to the center of the keyboard (the hit is associated with fist )

  Need help.

  The PC have error beep codes and it could very well those easily; not so easy with the laptops... or is it?

  Hello

  Find the links below for the information you are looking for blink codes on HP laptops.

  • http://support.HP.com/us-en/document/c01443366
  • http://support.HP.com/us-en/document/c01732674

• I bought the adobe photoshop light Room 6 today and I got my redemption code, I typed in it and he said that it was a success, and yet I didn't received any email I bought it from best buy and I have not received any email to any court and I cannot use my

  I need help I bought bright room 6 adobe photoshop light Room 6 version I have the dvd and they gave me a redemption code, I typed in it and he said it was a success, and yet I have not received an email... .i could not access right room because his request because the key and I don't have not any e-mail regarding the key to some body help me please what wrong?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• How can I add an effect of light with the code box and the javascript to a Web of Muse site?

  I have a finished site that I built in Muse. On one of the pages, I would like to add a light box effect, but none of the widgets that Muse. I wonder if someone can tell me how to go and add code and java script. I have the code and everything, I just need to figure out how to add in the code before I publish it online. Can someone help me?

  You insert the HTML Manual.

  Mylenium