Tecra M9 - no power orange light error code sequence

Similar Questions

• Tecra A9 - Blocking Power Saver - fatal error code: 0 x 2

  Hello

  Today, when I turned on my computer the energy saver has started planting.
  I rebooted the computer several times and the result is always a fatal error has occurred. The program will end. Code: 0x2.

  Even this error appears when I try to reinstall the application.
  Perhaps it has something to do with SP3, I have installed a couple a days ago.

  Someone has an idea?

  Martin Vassilev.

  I saw this error for a long time with Windows XP Home edition. In my opinion it has nothing to do with SP3.
  My experience says that you will not be able to solve this problem. There is something wrong in the registry entries and reinstalling will not help.

  One method can help, OS install new one, more radical using recovery media.

• Tecra S1: Empty screen and beep error Code appears

  Hello

  I have a toshiba tecra s1 and it no longer works, and I don't know why.

  When I start the laptop there is nothing wrong, but after 3 minutes or if the screen is not responding. Then I tried to reboot, it gives a black screen and beeps. The beeps are:
  short, short, long, break, short, short, short.

  And what he repeates himself. When I wait several days it will start again and then after 3 minutes it will "crash" again.

  What is the problem with my laptop? Why it works, and after 3 minutes no longer works?

  Thanks in advance.

  Best regards!

  Hello

  The laptop starts fine in the Windows operating system?

  Strange beep error code usually appears because there is a hardware problem on the S1 and the POST (power on self-test) cannot be passed correctly.
  If the computer falls down the POST, the computer then returns a beep code indicating what is causing the computer not not to pass on the MESSAGE.

  The problem is that all the different systems of BIOS support meanings of different code.
  As far as I know, Toshiba Tecra S1 uses Toshiba BIOS and only the ASP can read this code and know what it means. I recommend to contact the ASP in your country for assistance!

  PS: Check out this interesting page about additional information on computer POST / beep codes
  http://www.computerhope.com/beep.htm

• Saver 0x47f on power satellite fatal error code

  Hello

  I have a problem with energy saving on my satellite.

  When windows starts up a box appears saying ' program error fatal toshiba power saver will end. 0x47f error code»

  I tried to use the cd tols and utilities to try to reinstall the program saving energy, but when I click on setup on the interface, a box pops up saying

  C:\WINDOWS\SYSTEM32\AUTEXEC. NT. The system file is not for windows applications running msdos and Microsoft. Choose close to terminate the application.

  I tried to install from the msdos also command prompt but no luck it has the same message.

  Can anyone help?

  Hello

  This error message can occur if one or more of the following files are missing or damaged:
  -Config.nt
  -Autoexec.nt
  -Command.com

  I found this info useful here in this Microsoft Knowledge base article
  http://support.Microsoft.com/kb/324767

  try to repair the Autoexec.nt file and after new reboot you might to reinstall the Toshiba Power saver again!

• Portege R100 stoped working - the power LED flashes error codes

  I have a R100 that has suddenly stopped working.
  The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

  That - what it means, and where can I get a list of all codes error?

  I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

  I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

  Thanks in advance.

  Hello

  I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

  In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
  Here it s only a user to user forum and I have never seen anyone from Toshiba again.

  Anyway, here you can search for the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Satelite L775 used high power - orange light blinks 5 times

  Greetings,

  I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

  This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

  My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

  I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

  A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

  I can't afford to send my Toshiba for 2 weeks, not immediately.

  Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

  Disconnect the battery and press power for 30 seconds
  Unplug the adapter and press power for 30 seconds
  Disconnect the battery and the adapter and press power for 30 seconds

  (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

  I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

  I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

  One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
  I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

  Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

  The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

  Thanks for the time and help!

  Hi a8000

  Looks like you already tried all possible solutions
  The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
  However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!

• GlobeTrotter 3 G in TECRA M2, conflict error Code 10.

  Hello

  Just installed a Globetrotter 3 + in my Tecra M2 and I got and error Code 10. Ask the dealer appears to be related with IRQ however I have not the slightest idea of what is in conflict with the card. I tried to disable most of the hardware, but the error persists.

  I'd appreciate any help on this.

  Thank you
  JOINT APPEALS BOARD

  Hey jabertolin,

  I'm not very familiar with the 3G technology, but I found this article:

  http://www.3G.co.UK/3GForum/showthread.php?t=38445

  I think it s definitely not a problem to toshiba, in order to check this forum and maybe you can get a solution to your problem.

  Good luck
  See you soon

• Re: Toshiba Power Saver fatal error. Code 0 x 0

  Hi all

  I recently received this new notebook Tecra M10 (model PTMB0A - 00M 001) replace my laptop to existing business. It came loaded with Windows XP and built by the standard portable computer generation.

  It works fine except that at startup I get the error message "a fatal error has occurred. The program will end. "Code: 0x0.

  I did some research and I think that the original version may have been compromised, because there aren't has no files in the directory C:\Program Toshiba Saver except for a TPSTrace.log that has this message inside: "a fatal error has occurred. The program will end. "Code: 0x0 rental: TPwrSave.cpp (140). The Power Saver software claims to be v7.11.00.

  I downloaded the latest version 7.11.10 (for XP) and when you try to install, the software asks you if it can uninstall the existing version and as it tries, the fatal error code: 0 x 0 occurs which always uninstall, and I suppose that reinstall it. It seems a pity to restore from CD lose all data and other software that is very good because of this software pooey to save energy. Given the original installation was probably standard, there is no guarantee that even if I do a system restore on CD the same problem not re - manifests.

  Is there a way I can do XP think software is deleted (it seems to be absent physically, but XP think it is present) by forcing an uninstall. I can then try to reinstall it to see if I can do better than what it was when it was delivered to me. Otherwise, I'd be more than happy to just work without it, for the trouble it causes.

  Thanks in advance.

  Raymond

  You must delete it from the registry.

  Try CCleaner first, it may be able to remove the bad registry for you keys. (google for "CCleaner")

  Otherwise, run Regedit, and then search for "to sleep". Make sure that you delete, in order to ensure the results refer to Toshiba Power Saver.

  PS. back up the registry first. You can do this by creating a Restore Point in Windows. (Panel of-> system)

• IPMI error code 2900:0221 Power supply failure detected on PE R710

  My VMware ESXi host recently took itself offline. When I was looking for the root cause, I ran a diagnostic test on my R710 EP and the following error is generated:

  Error code: 2900:0221.
  MSG: IPMI - : power supply: sensor power supply (status) failure detected 'PS 2 '.

  The given error code and message can serve as Support to help diagnose the problem.
  Want to continue his tests?

  -end of the error message-

  I saw a post online to update the BIOS and firmware, I did. We are now running BIOS version 6.4.0. I restarted the test with the same results. Any ideas on what I can do to fix this? If the problem is indeed a power supply failure or a sensor on a feed, how do I know which one is bad? Lights on both power supplies are similar to the rear of the server. This unit is no longer under warranty.

  Andoven,

  Error Code: 2900:XXXX is historical, referring to recent system errors. It is usually good to clear the logs of equipment before running the system diagnostics. Included update for your firmware firmware on the power?  I guess that your two power supply status LEDs are both green.  If installed, clear the logs in the OMSA and then reconnect the power supply on the right (2 PSU) and see what OMSA reports.

  Let us know the status of the block of POWER 2 in OMSA and the current version of the firmware.

• Satellite M110 - Orange light flashes when I push the power button

  just before I managed based on the knock off my bed, on a glance the plug that goes into the computer look slightly bent and now when I try to turn it on, it does not work. even when it is plugged.

  An orange light is always flashing down the bottem when I press the button.

  So is this a problem computer or a power supply problem?

  Hi becks88,

  Sounds like a serious problem of material... You can start Notepad without AC/DC adapter or is the battery charging adapter?

  Try to delete also the adapter AC and the battery for an hour at least. Then reconnect the two and try to start the laptop.

  In the worst case you need professional help a :(authorized service provider

• Satellite A60 power button / light stop in 2 colors. blue & orange

  Hi can someone tell me why power button lights in 2 different colors Blue and orange every thing seemed to be sure best ok
  Thanks in advance

  This will happen if your laptop is in stand by mode.

• HP 15-f004dx laptop: power on error code 55133891 for laptop HP 15-f004dx

  power on the 55133891 error code (my power on password forgotten)

  Hello:

  Enter the unlock code...

  40891217

• power on password for hp pavillion g7 error code 62951015

  I have a Hp pavillion g7 I gave to my niece, but she put a power on password on it to keep me and my sister the error code is 62951015 thanks

  Hello:

  Try:

  73639031

• Canon mp250 5200 error code, yellow light that says alarm starts flashing.

  Original title: canon mp250 5200 error code

  I downloaded the drivers and get an error number I think it is 5200 on printer, the yellow light indicating alarm flashes?

  I tried the evry thing. Can anyone help?  Thank you

  Hello
   
  1 have. what troubleshooting measures you tried so far?
  2 do you have an error number 5200 while installing the drivers?
  
  Method 1:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Method 2:
  This error is that your used ink is full.
  Reset the printer. Press the reset button and hold it while it is. Then, turn it on and press the reset button twice.
  It will go into maintenance mode. Here you can reset your used ink pad. Just follow the instructions and press reset 4 times. Turn on your printer and turns off again and see if it helps.
  Note:  To learn more about the method 2 check the printer documentation to determine the steps or contact the manufacturer.

• Error code 10 cannot install Maxtor 3200 after power failure

  Original title: maxtor 3200 code 10

  After a power failure cannot not re install Maxtor 3200 get response Code 10

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you run the FIXIT from the link below and if it helps. You can also follow the manual steps and check.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Hope this helps and keep us posted.