Coffee spilled on my ergonomic keyboard 4000 MS. v1 and now nothing works.

Similar Questions

• No CD-ROM with ergonomic keyboard 4000, then things do not work

  Hello Allayas!  :-)

  OK, so I recently bought a:
  Microsoft 4000 ergonomic keyboard

  Only problem is that it didn't come with the CD-ROM, which usually has the drivers, other software/freeware and instructions and so on and so forth.

  IE: for example -.

  • I can't use 5 programmable keys at the top of the keyboard, in the Center, and I think ' they are supposed to be the most important because of their location and so on.
  • The Zoom slider in the middle of the keyboard is ab-so-lute-ly, nada! [Samething goes for the key with the big star on this subject.]
  • Almost all the buttons do nothing. Not at all.
  • more there are things written on the front of the keys, I have no idea what to do with them. They have words like: {copy, paste, cut, search, save, all pointed out, new open, print, italics and they also} a few buttons that work, like, on the F12 key, it says 'print', well I say is for printing

  Is it possible that I can get a 'friend' to post, so I can download the contents of their CD, as everything in a folder and let download me, or you can send it to me to.

  Thank you very much

  I'm Brucie, Morano

  E-mail address is removed from the privacy *.

  P.S. - Do not hesitate to write me a note or an email, if you want to help me oout, OK?

  Hello

  Natural Ergonomic Keyboard 4000<- drivers="" and="" other="" help="" -="" set="" to="" your="">
  Windows under the heading downloads

  https://www.Microsoft.com/accessories/en-us/products/keyboards/natural-ergonomic-keyboard-4000/B2M-00012

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Natural Ergonomic Keyboard 4000

  One of the legs in plastic which accessories (key) keyboard has cracked and broke two arm.  How can I replace?

  Hello

  I doubt you will find a replacement if possible. One option would be to
  a replacement on a rigid hanger. Also check with your local computer shops and
  other computer vendors may have an old. I use a 4000 here to do.
  stand shift should help, but not perfect.

  Natural Ergonomic Keyboard - 3-year warranty
  http://www.Microsoft.com/hardware/en-us/p/natural-ergonomic-keyboard-4000/B2M-00012

  These keyboard comes with a support tech 90 day of the 1st incident that would begin
  When you contact Microsoft below number - not sure what your question is the
  guaranteed however they need to be able to tell if the piece you are looking for is available.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

• Function keys not working not not in Microsoft "Natural Ergonomic Keyboard 4000. -SOLVED

  RESOLVED: the choice KVM does NOT relay commands. [Yes, I spoke with the KVM hardware manufacturing] - if someone does know of a KVM FACT support Pass-thru orders?

  Original title: F keys intellitype keyboard does not not on XP.

  We have several Microsoft installed "Natural Ergonomic Keyboard 4000" and discovered one day we are experiencing problems with the function keys.  In our software provider, we are supposed to use SHIFT + F11 to access a specific function.  However this keyboard shortcut does not work.

  I installed the latest drivers of "http://www.microsoft.com/hardware/en-us/d/natural-ergonomic-keyboard-4000" for Windows XP (32-bit) and Windows 7 (64-bit) and installed on the right machines.  Yet this problem persists and I can't find a way to deliver a new command outside provider software to test if it of a hardware problem of keyboard or not.

  Any suggestions?

  BTW, the seller says "contact Microsoft", SOP answer because "it is not our fault for your choice in hardware.

  The application is developed for Windows XP and later versions, each system is at least a dual core Athlon + 4gigs of memory, with the latest OS updates.

  Thank you
  Will be

  Did you do the "F-Lock" is on? -Side of the Print button.

• keys not working on Microsoft Natural ergonomic keyboard 4000 v1.0

  Suddenly, sixteen key doesn't work on my keyboard (Microsoft Natural ergonomic keyboard 4000 v1.0). No mechanical rigidity without bumps or moisture & maintain clean and dusted. It happened during a long session of Mozilla Firefox, type in the search bar. Same thing happened a few days ago still type in the search bar, but he corrected himself. Tried disconnect & reconnect the keyboard (USB), restart the computer, etc.. Using Windows 7 64 bit OS. To the help of OSK to write. Non-functioning of the buttons are "1 2 3 4 5 6 - = Backspace j k l; / Anyone got any ideas, or it's time to get rid of my favorite ergonomic keyboard?

  Using the keyboard to the screen until what the colon and semicolon keys can be restored. Following this stream.

• Natural Ergonomic keyboard 4000 zoom does nothing

  I installed correctly, the driver began to use the keyboard, it installed more things, then restart Windows. The keyboard and all functions work except the zoom does not have anything in any program. I don't want to scroll or do something unusual, that I just want to exercise the zoom feature that exists in many menus of windows program.

  Hello

  -Have you tried the steps mentioned in the post above?

  If this isn't the case, I suggest you try the steps mentioned in the above post. If the problem persists, follow the steps mentioned below and check if this solves the problem.

  Method 1: I suggest you to follow the steps from the link and check if it helps.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2: Also, I suggest you to install the drivers from the link and check if the problem persists.
  Natural Ergonomic Keyboard 4000
  http://www.Microsoft.com/hardware/en-us/p/natural-ergonomic-keyboard-4000#support

  If the problem persists, I suggest you to contact Microsoft Support for assistance.
  http://support.Microsoft.com/hardware

  Hope this information helps.

• Natural zoom key ergonomic keyboard 4000 can be customized to scroll in particular form?

  Hello

  I recently bought natural ergonomic Keyboard 4000 and I managed to install hardware driver also Microsoft Mouse and keyboard Centre.
  I noticed that I can disable the zoom key in Microsoft Mouse and keyboard Center but could not find anything on the customization, but as I translate documents using Microsoft Word, I really need this key to scroll indicator in Microsoft Word, so I can move quickly between the lines.
  I would really appreciate if someone could help me solve this problem because I bought this keyboard particularly to capture and translate and it would be a loss to me if the key cannot be customized.

  Thanks in advance

  Hi Anahita,

  I suggest you to contact the assistance of Microsoft Hardware team to improve assistance in this regard.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Hope this information helps.

• Stickers anti-slip for Natural Ergonomic Keyboard 4000

  I just moved across the country and three of the tabs at the bottom of my Microsoft Natural 4000 keyboard ergonomic anti-slip lack. Does anyone know if there is a way to replace it? If this isn't the case, you have a DIY remedy? Thank you!

  Hi Eugene,

  I understand that you are looking for ways to replace the tabs non-slip on your Microsoft Natural ergonomic Keyboard 4000.

  We suggest that you contact the service center and check with them, please see the link below:

  http://www.Microsoft.com/hardware/en-in/reseller

  Hope this information helps, to get help, please reply.

• Windows 7 does not recognize any keyboard, except the v1.0 of MS natural ergonomic Keyboard 4000 defective

  I have a very strange problem.

  I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.

  So, I bought a new generic keyboard.

  The problem

  1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.

  2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.

  However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.

  It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.

  I tried many things

  1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.

  2. I tried using different USB ports on the desktop. He has not made a difference.

  3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).

  4. I tried to start Windows in safe mode. That did not help at all.

  Any help would be greatly appreciated.

  Hello Pauliw,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.

  You can try the steps in the following Microsoft article and see if it works for you.

  Troubleshoot keyboard

  Note: There is place for Windows 7 also.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.

  1. Click Start

  2. In the Search box, type command prompt .

  3. In the list right click on command prompt and select run as administrator.

  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1

  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.

  6. When the Device Manager opens, click on view

  7. Now, click Show hidden devices.

  8. Remove all the entries that exist for the keyboard and the USB category.

  9. Close Device Manager , and then restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Microsoft Natural ergonomic keyboard 4000 is incompatible with Windows 7

  When I type a letter, I receive a letter and a number (ex: I type "s", the computer prints "s7"). I tried redownloading drivers, but I get an error message that this keyboard is incompatible with Windows 7 and it wont let me start the CD.  I looked on the MS site for a fix, which is there, and I downloaded it, but it did not work.  I am always told the keypad and the software are incompatible.  I went through this process 3 times and now I'm frustrated that I spent $80.00 on a MS product that says that the site of MS is compatible with Windows 7, but it doesn't help with this computer.

  64-bit IntelliType Pro 8.0 download page is available here .  IntelliType Pro 8.0 32-bit is available here .  Is that what you have already installed?

  Vote if you find it useful.  Click on brand or propose as answer if that answers your question.  It will help others find the answer in the future.

• L5V-00001 Sculpt ergonomic keyboard mouse with KVM and Wireless Office

  Transmitter/receiver plugs directly into the PC, the keyboard and mouse both work very well.

  When the transmitter/receiver plugs into the USB port on the KVM switch, only works for keyboard, the mouse seems dead, but gives PC meet the win button (blue button) on the mouse.

  I have to use KVM in my env work and also really want to use Sculpt costume

  so please help me what KVM switch could support L5V - 00001 Sculpt ergonomic Wireless Desktop

  Hello

  Please contact Microsoft Community.

  I want to tell you that the KVM are you using currently has a problem. All KVM switches generally support the mouse model you mentioned...

  So, you can contact the KVM manufacturer in this regard. Or you can use your favorite search engine to buy a new one.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• Coffee spilled on the magic keyboard

  Hi guys, I recently spilled some coffee on my keyboard magic and tried my best to remove it...

  The day after that, I tried to use it to see if it worked correctly and he realized that some of the keys are not working...

  Is there a way I could solve this problem?

  Here is a photo showing the keys which do not and those who are...

  Probably toast.

  Worse still, you can probably buy more 2 (one is a backup) and little to transport the parts.  OWC (macsales.com) carries the original wireless keyboard.  The only wireless sold by Apple now keyboard is designed for single El Capitan, not only not to work (less reliable) with Yosemite and back.  It does not... easy to tell who's old and new batteries.

  OWC carries the old style, still at $69.  As well as the old style Magic Trackpad at $69.

  If you beg and plead, Apple store * could * exchange one of the used old from their shelves for a fee, but ask nicely.

• Use of the front and back buttons on the ergonomic keyboard 4000

  Title: Back and forward buttons

  What to do the back and buttons before just below the SPACEBAR of ergonomic 4000 keyboard. Nothing in the manual about what they are for, when others touch programming that they are not listed. And when I press on them, nothing happens. I run windows 7

  Title: Back and forward buttons

  What to do the back and buttons before just below the SPACEBAR of ergonomic 4000 keyboard. Nothing in the manual about what they are for, when others touch programming that they are not listed. And when I press on them, nothing happens. I run windows 7

  have your help I tried before and buttons to the rear while a Web browser, or an image viewer is open?

• BUG: buttons assets my natural ergonomic keyboard 4000 start all programs as priority "below normal".

  As the title says. All programs started with the departure of NEK 4000 as 'Below normal' priority, as seen in the Manager of tasks. When I run these programs to their shortcuts, they begin to 'Normal' priority

  I don't see a way to change this setting in the system of intellitype keyboard (or mouse).

  I guess it's a BUG.

  If this isn't the case, I need advice on what could cause this and how to fix it.

  Thanks in advance.
  -Rich

  I did further research and found that it is Task Scheduler which sets the priority to itype.exe and ipoint.exe running, because they are launched from there.

  There are 2 spots each which are run from the Task Scheduler.

  Microsoft_MKC_Logon_Task_itype.exe

  Microsoft_Hardware_Launch_itype_exe

  Microsoft_MKC_Logon_Task_ipoint.exe

  Microsoft_Hardware_Launch_ipoint_exe

  See this article.

  http://bdbits.WordPress.com/2010/04/29/setting-a-scheduled-task-process-priority/

  When they moved tasks MKC to logon from the registry to the Task Scheduler, (they have did this when they created the center of the mouse and keyboard), they kept the same less than normal priority as launch tasks.

  I can't say with certainty whether it was intentional or not.

  I check mine are defined in the same way (below normal).  I do not use a Microsoft keyboard, so I saw no problem.

  I tested the change and he starts to normal priority

  I just changed the MKC logon tasks as others ran below normal in previous versions

  tasks.

• In Win 7 keys on the Microsoft Natural ergonomic Keyboard 4000, Firefox &amp; Thunderbird quick launch only throw in the toolbar, without opening the program, then blurred

  Although these keys to quick launch on this keyboard worked fine on this computer Windows XP, when I switched to Windows 7 64 bit, they started having this problem, but only with Firefox and Thunderbird. If I program these keys to open other programs, they do not have the problem. Therefore, something Firefox/Thunderbird, Win7 64-bit compatibility and software of this keyboard (latest version).

  When I press one of the keys to quick launch on this programmed keyboard for Firefox/Thunderbird, they display a rectangle of program in the taskbar only, but no program opens on the screen. When I move the mouse over this rectangle in the taskbar, the program opens immediately, but to focus.

  I also tried to reset Firefox, but this does not change the behavior at all.

  There are a few users of Thunderbird here, but you could probably get better press here dedicated support site: https://support.mozillamessaging.com/