color faded with MG 7120

Similar Questions

• How to scan color PDF with Photosmart 6520

  How to scan color PDF with the Photosmart 6520? They only appear on my Mac in black and white and I don't see any option to specify the color on the device.

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  Kind regards
  Shlomi

• Screen color problems with Dell XPS 15 on battery!

  1 week bought a new Dell XPS 15 laptop, rear.

  Config: Intel Core i5, Nvidia GeForece GT 540 M (Optimus) with Intel HD graphics embedded, 8 GB of RAM

  The problem is that the color of the screen looks unreal, the color of the icons fade and look like whitish and 256 bits and faded color mode.

  The main point is that the problem only occurs when the system is running on battery. Is the problem with the Optimus technology?

  I have the latest drivers, it would be my course of action now?

  Hello

  I bought the brand new XPS 15 1 month back and I had same problem

  My features are Core i7 Nvidia GeForece GT 540 M (Optimus) with Intel HD graphics embedded, 8 GB of RAM.

  But I disable the functions of conservation of energy which is shown in the below photo attached and after that I didn't meet with this problem. U should also try and give me feed back to this topic.

  Thankx

• Screen color faded on Satellite Pro M30

  Hi people

  I just browsing the internet when my color on the screen of my old m30 of 11 months gone, I rebooted and all I get now is a blank white screen with a few lines down it. Someone at - it had the same problem?
  I hope that this is covered by the warranty.

  Nigel

  Hi Nigel,

  If your laptop is still covered by a warranty then would certainly consider a Toshiba authorized repairer. It sounds as if there is a fault either with your graphics card you screen.

  Good luck

• The use of color matching with a webcam

  Hello

  I have a webcam which I am able to use successfully in labview (i.e.. Get images)

  I looked at the examples of criteria special color and tried to change them, so that I can detect a red spot, which can be seen through the webcam, but were unsuccessful.

  Basically I'm doing color real-time pattern matching

  Can someone point me in the right direction? Or help out me?

  Thank you

  Hi guys,.

  It is an excellent example that installs with the vision development module. This example maybe not EXACTLY what you're after, because it allows you to dynamically set a color model to match. However, you can still save a static "model model" on the disc as well as the use in your code - if it is more relevant to your application. As a bonus in adding, deleting the dynamic learning model would simplify the code a bit.

  Example of model color matching

  When ni.com research or the finder for example LabVIEW, do not forget to specify the COLOR the American way... color.

  Thank you

• You can change the background color vi with a property node?

  I was wondering if it was possible in Labview to use a property node to change the background color of façade for an iteration, then back to an original color later. I don't think it's possible, but I would like to know for sure.

  Thank you

  Jody

  You can get the property pane directly node by right-clicking the scroll bar on the front panel and create-> property Node-> color pane.  Useful with multiple panes.  You can also click the property pane node in example of (imstuck) and choose link and then select the pane.

  

• Why the few screen saver color faded on photos photos

  Why is the color on pictures on the screen saver window faded?  They are not faded when viewing in pictures

  Hi GeorgeElmenhurst,

  ·         What version of the operating system is installed on the computer?

  ·         Did you the latest changes on the computer before this problem?

  I suggest you follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: Update video card drivers.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Quality of rpint HP Laserjet color faded to the right of the page, toner cartridge the culprit

  Thus, a resolute quirk.

  My HP Laserjet 3800dtn produced pages in which the colors are washed out or did not go to the right margin.  Various associated software HP print diagnostic and diagnostics pages feel integrated, product pages with the same problem.  The colors on the right do not appear, but the black characters, text, graphic appears.

  At first, I thought it was the length of the USB cable, so I went to an Ethernet connection and run all the tests again and got the same results.

  So I took one of the toner cartridges and replaced by a new.  The same problem.  Then, and what a weird coincidence, I discovered that there are two somewhat 'heavy duty' springs on each side of the toner cartridge that works with the door (shadow) on the roller.   One of the springs was detached.  But it just not a not dislodge, because the position whereby the spring attached (a little nub) is broken.

  My conclusion is that the door opened only partially, and therefore the toner is never properly transferred to one side.

  Maybe I broke the node with some brutal manipulations, maybe a new one was defective, that it is I got two defective cartridges.

  However, not wanting to throw a + $100 cartridge, I stuck the spring and post and allowed him to dry overnight.

  Reinserted the fixed cartridge and everything of fine.

  Just sharing.

  An update more.

  Among the repaired 'bumps' failed.

  So I heated a thin nail, and he passed through the plastic in the area where the 'essential' existed.

  The, using fine wires, I threaded the wire through the hole of very small diameter and attached to spring for the plastic.

  Yes, success... another cartridge saved from an ignominious early elimination.

• Color H6510BD with PS4 Playstation problem

  I use a H6510BD projector for a few months without problem. I got a PS4 today, and when it is connected to the H6510BD it seems to be a kind of color problem, such blues appear as green and white in pink.

  The works of projector very well with the Xbox 360/PS3/DirecTV and the works of PS4 well on my LG TV, so I can only assume it is an incompatibility between the PS4 and H6510BD, although I have found no mention of this online phenomenon.

  I tried all of the usual power cycling, different HDMI cables, direct connection between PS4 and projector, through receiver etc.

  Anyone have any ideas as to what could be up and how to fix?

  Thank you!

  OK, so to close this one out, I'll be the Acer projector with upgraded 1.04 to 1.05 firmware and the PS4 is displayed as it should; the above cited question seems to have been resolved.

  So everyone is facing the same problem, you should check your firmware version and contact Acer for a upgrade if necessary.

• Why do my colors differ with Win DVD maker?

  Here's the long version... I use Windows Movie Maker 2.6.  I have a bunch of photos I shot in raw (Pentax K10 - D) and edited in Photoshop. In the middle of the process, I thought I'd be a good idea to calibrate my monitor, so I downloaded the software and calibrated using an old HueyPro.  When I put in place the film in MovieMaker, the colors looked really good.  After putting on the DVD, the colors are off. in particular, the uniforms are disabled.  They should be a dark blue.  On the DVD, they have much lighter air.  (All the colors are a little off, but the Blues seem to be particularly affected.)  If it helps, the DVD is just as bad on the PC and TV ;)

  I'm sure it's a question of color profile.  However, I'm over my head on how to solve this problem.
  In the System32\spool\drivers\color folder, including the color profile Huey.  Adobe also has its own wsRGB.icc and wscRGB.icc to (c:\users\Steve\AppData\Roaming\Microsoft\Windows).
  ANY ideas?  Thanks for your help!
  -Steve

  Sorry, but I can't think of anything that would be
  improve the graphics in the slide show Movie Maker
  unless a custom profile would help...

  Movie Maker - recording movies - custom WMV profile
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Right click / Save target as... drop in the following Vista folder:
  C:\Program Movie Maker\Shared\Profiles
  (you will need to create the profiles folder, if it is not there)
  Profiles customized for Win XP, Movie Maker will work with
  Vista Movie Maker 6.

  The last section of the following article explains how
  Publish (save) by using a custom profile.

  Windows Vista
  Create custom movie settings
  for Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

  The PhotoStory 3 freeware could be worth a try
  but you have to start over. Personally, I think
  It is a better application for slideshows with music. It will be
  don't manage 300 photos (maybe less if a lot of movement)
  effects and transitions are used). If the project is larger
  that it... create more and import in creation of DVD...
  each clip is a scene (chapter).

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoStory 3 for Windows
  http://www.Microsoft.com/download/en/details.aspx?ID=11132
  (works with XP, Vista)

  I was wondering why you use MM2.6 instead of Vista MM6?
  If it was due to limited system... do you think that
  likely to affect the quality of the rendered video file?

• Strips of color scanning with scanjet 3970

  Hello. After several years of work very well, my scanjet 3970 is a failure. When I scan it shows on the screen preview and saved file bands colored in the picture. I use Win XP and the latest drivers. The problem also arises when I scan from any twain app or Win XP "scanner and camera" Control Panel app.

  The problem has nothing to do with the effects of moiré or any type of effect of ground and also appears when you scan a page completely black or white.

  Anyone know a fix or I buy a new scanner?

  TNX

  Hello Rosquillp,

  You probably need a new scanner, because this model 'rainbow' is ussualy a defective ccd of o chip sypthom. This chip translates light into electrical signals and if its broken you can get these effects.

• The color faded after Windows update

  Hello

  
  I had a quick search but am finding the interface of the somewhat difficult forum looking for, sorry in advanced if it is a double upward.

  Recently, I noticed that images open in both photoshop and lightroom are washed-out (blue tint, as if you have the color space is set wrong).  However when I open the image in the image windows photo viewer looked perfect.

  All images are set to sRGB in all respects.  When I open the images in photoshop from another machine, they are also very good, and I compared the config including color spaces of the two machines of... no difference at all...  It's just that a pc that has the problem, and on this pc, the problem only occurs in photoshop and lightroom - unfortunately the PC in question is my pc edition.

  This problem has been completely resolved to roll back the update of birthday windows 10 - no other changes at all, I have believed it if I hadn't seen with my own eyes.  So I'm going well so far, but this is obviously not ideal.

  Does anyone else have this problem?  And if so, were you able to fix it without uninstalling the update of windows 10 birthday?

  In case it is relevant, here are the specs:

  i5 - 6600 k using onchip graphics

  32 GB of Ram

  SSD Intel 525 (OS)

  SSD Intel 730 (installation of adobe)

  SanDisk ultra ssd (work space, where images are edited)

  Dell UP2716D, calibrated with the dell software and equipment, associated with the set of good color profile.

  But what I don't understand is how the images can look good on the same screen using windows photo viewer, but look rubbish in lightroom and photoshop?

  Lightroom and Photoshop are insured, which means that they use color profiles embedded in images and the color profile associated with a calibrated screen to faithfully show accurate colors. So if the display color profile has been removed or altered, they won't be able to display correct colors.  The Windows Photo app, on the other hand, is not color managed, so it doesn't matter what color profile is associated with the screen, since it won't use it.

• Animated color problems with CC processing

  I am trying to create an animation for my company, some parts of it will be created in Animate (background, text, etc.), other parts are images I shot of our product that I import in.  When I do that, they lose much of their color.  I tried to import PSD, PNG, and JPG files.  No matter how they get made, whatever their format, they lose the color.  They are quite a bit different from what they were once, as long as there is no way I can do this with CC to animate.  All my Adobe products are the current versions, because I am a full CC membership.  So I don't know what else to add to it to make it more clear on the question, if you need any additional information from me, please ask.  Any help on this will be appreciated.

  Thank you!

  The 16 bit part might matter. JPEG is normally 24-bit, and special Photoshop 16 bit modes might confuse Animate. Have you tried to use images of the ordinary 24 or 32-bit?

• Develop gets another color profile with GPU speed

  I had problems after the last update of Lightroom CC 2015.5.1 version:

  1. I lost my color profiles. I know how to solve this problem, it is not a point of interest;

  2. I see different colors in library mode and develop with GPU acceleration mode on. It's the same situation with regard to the FIRST both in regards to JPEG files. It can be fixed only by disabling GPU acceleration which is not a better way.

  Did anyone get the same problem with the last CC Lr? How do solve you?

  See this post for a possible solution: library vs Developping

  You probably have a faulty monitor profile.

• Can I use a "30-bit color display" with my iMac with an AMD Radeon M295X graphics card?

  I am interested in the use of a monitor NEC PA272w or PA302w with the iMac to get the widest color gamut screen.

  The range is not related to the bit depth. You will get the wide range without worrying.