Color Laser Jet CM1312 MFP: Is there a driver that allows me to use all the functions on this printer, including scanning

Similar Questions

• HP color laser jet cm1312 mfp sharing does not work

  Hello, I have a problem.
  The this printer to connect to the server (windows 7 32 bit, latest driver).
  Other users (network) may not print, but after restart server, everything works...
  What is my problem? Help, please.

  Hello

  To understand the issue correctly, try the following:

  1. If all the shared PC are not able to print, check if you are able to print from the server PC.

  If print server as PC still work, there will be some communication issue betn the server and the other computer on the network.

  2. If printing from computer Sever also does not work unless you restart the server PC, it might be a problem with the spooler on the server or the printer driver. You can try to reinstall the printer driver and the reshare to PC network and check.

  3. this question could also arise from the printer itself. Tray to update the Firmware of the printer to the latest version and check.

  4. If the driver on the server is offline, try now to turn off the SNMP state:

  From the Windows desktop, select Start, settings, and then click Printers. The icon of the pilot series HP LaserJet XXX, right-click and select the Ports tab, check if the correct network (IP address of the printer) port is enabled in the list of ports, click on the button Configure the Port, in the Port Settings window, uncheck the box next to the option "SNMP status enabled" (disable), click OK to save the settings , click on apply and then click OK to exit the properties of the driver.

  See you soon,.

  Manjit

• HP COLOR LASER JET CM1312 MFP: Print cartridge problems

  I loaded two cartridges with success, but with the third (CB541A - Cyan) I get the 'delete the shipping in the Cyan cartridge latch '. It IS deleted. I put the old cartridge and no problems, I tried again with the new and the same message appears. I tried to turn off the machine with the new cartridge in but nothing works.

  What should do?

  But not sure since the old one works, sounds like a faulty new cartridge. Consider a replacement.

• Can't find a downloadable update to allow me to use all the facilities and to print in color.

  I have the machine installed on an older imac. Now, with a newer imac with Mac OS x 10.8 Mountain Lion, the software disk I have does not open. I am also unable to find the printer hard disk utilities. Am able to print, but only in black and white.

  Thanks for the clarification.

  The drivers of your printer are available via Apple Software Update.

  Be sure to follow the steps below to install and how to use the printer and the scanner on the Mountain Lion:

  http://support.HP.com/us-en/document/c03378792

  For any question, download and install the package below, and then add the printer in Print & Scan and check any changes:

  http://support.Apple.com/kb/DL907

  Shlomi

• is there a driver that will save 2000 machine (only) impression on m1536 network printer?

  We have a LaserJet MFP 1536dnf for use on a Windows network with mixed operating systems. All Win 7 and XP machines are fine, but we have a machine still running Windows 2000. We must print only the capacity for this workstation, scan and fax, is not necessary. Is there a driver that we could install on Win 2000 machine that he would let to print on the 1536?

  Hello

  Try the Laserjet 4100 as an alternative engine.

  In my view, that it will allow you to print to the M1536:

  1. Download the software below:http://ftp.hp.com/pub/softlib/software8/lj828/lj-2010-10/lj4100pcl6win2kxp2003-en.exe
  2. Run the file, click Unzip (unpack).
  3. In Control Panel, add a printer manually by setting the TCP/IP port.
  4. you will find the drivers in the folder c:\lj4100-4100mfp.

  It will be useful,

  Shlomi

• Color Laser Jet M277dw MFP: Print quality

  Just got this new printer today.  Already, I'm sorry that I bought.  Too complicated to implement.  It replaced an Epson Office Jet which was VERY user friendly.  Support staff is fairly dismissive.

  I tried to print a greeting card with a colored background and white printing.  It print out okay, but the impression was black and unreadable.

  Any ideas?

  Just consider return it for a refund and buy something else.

• I recently got an iPad Pro with the intelligent keyboard. Is there another case, that it can be used with the smart keyboard for more protection?

  Is there something else that can be used in conjunction with the smart keyboard from Apple for my iPad Pro?

  What about the back/rear of Apple/cover for iPad Pro?

  http://www.Apple.com/shop/product/MK0D2ZM/A/iPad-Pro-silicone-case-charcoal-gray? FNODE = 9 a.

• HP Color Laser Jet CM2320n MFP

  Y at - it an app for my iPad that would allow me to send printing to this printer from my iPad? I had an ePrint application but learned that it was only to wireless printers, and allows the CM2320 for network printing, but not wireless.

  Sorry this printer does not have wireless and e-print function. To send the job through your ipad requires service e-print and not necessarily wireless enabled printer.

  Click on the star of congratulations if it was useful. Thank you!

  (Although I am an employee of HP, I speak for myself and not for the HP)

• There used to be a drop-down list next to the arrows to go fwd and back through the pages. He showed the last several pages viewed. I also miss the option to the fence that allowed you to reopen all the tabs you closed with. Can recover us these feature

  What do you most need?

  You can get the menu drop-down by clicking on the previous/next buttons or now the left key pressed until the list is displayed.

  If you want the drop-down arrow, you can add it with the add-on of dropmarker rear - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

• HP Color Laser Jet MFP M177fw Pro - Scanner Error 22

  I get the same Scanner Error 22 on the Color Laser Jet Pro MFP M177fw like many others have posted.  Tried uninstalling\reinstalling the software and tried the most common loading drivers but Scanner error prevented this piece of finish.  Support and I was told we would have to pay $49.95 for them to help us solve the problem.  We just bought this printer 5 weeks ago.  Is this all we can try?

  Thank you!

  Thank you for your response. This solution does not solve my problem. HP customer service had travelled me several tests (took about 20-25 minutes total) but ended up sending me a replacement printer. It arrived within two days and so far, the replacement works great. HP has also paid to have the original shipped in return. The process was fairly hassle.

• Color Laser JEt MFP M477fd Pro: automatic update of ruined printers print

  My new laser Jet worked very well until I followed the instructions on the printer for an automatic update. Now print is ruined. Page layout is described in gray, and look bad color photos. This happened DIRECTLY after that I said yes to the screen to update printer on the printer itself. I did not change my Mac.

  I tried closing printer, computer shutdown, and then restart the printer, then restart the computer.

  The Configuration report (can barely read.) Firmware Datacode says: 20160331, which is apparently the most recent printing for my model software.

  I'm on a Mac 10.10

  Color Laser Jet Pro MFP M477fdw, bought end of 2015.

  The printer was so easy to set up and worked wonders for 200 pages that I sent to him so far, until I said yes to an update. Wish really to say yes to that, but I just assumed it would work as well as everything else.

  Thank you for your help to solve this.

  After trying countless things, including uninstalling and reinstalling the printer and download the latest driver, I called Technical Support. The number is on the internet, not on HP. 800-334-5144 where you need it. They continue to try to trick you online, but eventually, you get to someone who can help.

  When I described the print results, I was getting, she had me do the cleaning Page, 3 x and 3 x color calibration, which corrects the problem.

  The problem of updating firmware with the trainer, is what I * think * she said.

  If your printer works fine... DON'T let NOT download an update.

  It has been long since I've owned a laser printer. Lesson learned. Thank you, Natasha.

• HP Laser Jet CM1312nfi MFP: No compatible Twain installed device

  Hello

  I hope someone can help please. Yesterday, I was using my printer color Laser Jet CM1312nfi MFP multifunction scan a few pages. The analysis went through fine without problem like so many others before. No changes have been made to the system and I am the only person using the computer and the printer.

  About 45 minutes after the last scan, I went to scan another page when I got this message:

  "No Twain compatible device installed, please install one and try again.

  The scanner wouldn't work. I tried restarting the computer and the printer on and outside, does not. I thought that maybe there was a problem with the machine itself or a loose cable or connection but the machine still print documents.

  I tried to use HP printing and doctor Scan and it does not work. He guided me to several pilots. I downloaded and tried one called "CM1312series-win7-full-solution-AM-EMEA1-v5.1". The installation will not fully cross and reverses. The same thing happens when I try to reinstall the original software that I used to use the scanner a few years back.

  Can anyone help?

  Thank you

  Thank you

  I finally solved the problem the next day after several hours of frustration.

  I would like to uninstall the driver software, disconnect the USB cable, and restart the computer. After the reboot, I would try one of the options mentioned previously. At some point, the installation process asked me to reconnect the USB cable and then click on the button 'OK' or 'Continue' in the dialog box for installion.

  However, I noticed that as soon as I plugged in the USB cable, but before I could click the button, Windows would automatically begin to install a driver. That would be doing the same thing. He would install components 6 or 7, 4 or 5 would move to print successfully. A separate status dialog box would jump to the top showing these parts installed. A green check mark appears beside the print functions. However, 2 components dealing with sweeping would not install properly. These components would get a red X next to them.

  During this time, I would have clicked on the button 'OK' or 'Continue' in the dialog box for installion. After a few minutes, the installation abort itself and I would end up having to uninstall the driver and restart everything again.

  Finally, he appeared on me that 2 separate facilities are taking place at the same time. What finally solved the problem after uninstalling the driver and restart again, I started the original installation process, but when I was asked to connect the USB cable, I first disconnected the computer from the internet and then connected the USB cable.

  Before I could click on the "Continue" button, I noticed that the separate installation process began again. Immediately, I clicked the X in this dialog box to put an end to this facility. I then clicked 'Continue' on the installation dialog box desired and it finally all settled. Once it is installed, I reconnected it the computer to the internet and the scanner now worked.

  Thanks for your advice in any case.

• Color Laser Jet MFP M277dw Pro: frequently updated software

  I am the owner of a color Laser Jet MFP M277dw Pro. I get updates almost every week, and the software update is very strange. I'm clicking on the update system, it takes a lot of time to meet up with the text saying I'll remove the actual update or add another device. When I say no, thanks, I'll get a message saying that my update was successful (but only if I have to cancel this message). I don't understand why I have to go through this illogical question. Also, I don't understand why it is not necessary to update very frequently, especially when there is no explanation of the reason why.
  
  The two just exclamation points annoy me because I think that there must be a problem with the software, even if the printer works well.
  
  Sincere greetings
  
  Arne H. Wilstrup
  Denmark

  AHW

  Greetings @ahw,

  Thank you access the Forums from HP Support for extra support! I see that you have problems with updates of window for the printer software. I'd love to help you.

  Given that the printer works, I would say to hide updates.

  A poster tried to show or hide updates and it solved their problem.

  • How to "hide update" during the Build 9926
  • Need for the old Windows Update, not the new Windows Update
  • Windows 10 - where is the 'hide or show updates' hidden feature
  • How can I hide this update in Windows 10?
  • How to hide Windows Update, Windows 10 build 10061?

  You can also give your feedback to Microsoft, and if all goes well, they will release an update to correct the function of the operating system. You can learn how here; Updates and feedback.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

  Hello

  What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

  Thank you very much

  Paul

  Hello

  No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

  http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

  Kind regards.

• Color Laser Jet MFP M277dw Pro: Color Laser Jet Pro Scan to network file

  I'm trying to implement the network folder with my Color Laser Jet Pro M277dw and my MacBook Air with OS X 10.10.5 MFP scanning.  I've implemented the SMB shared folder as indicated, you can see here where I gave everyone access read/write:

  

  On the HP management page, I put in the path by using my IP address, as suggested in this article.  However, the connection test is always a failure.  Could someone give me some advice?  Here's what I came in the form of HP:

  

  Thanks for the help!

  Of course

  You can find the firmware on the page of product below:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Kind regards

  Shlomi