Color Laserjet 3600n does ' t print. Message "looking for printer." New ethernet cable - no improvisation

Similar Questions

• HP Color Laserjet CP2025 does not print the colors in the document

  Original title: print film

  I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

  Hi DirkjeAbma,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3 color printing fails all printing applications?

  You can see the following HP support article and check if it helps to solve the problem:

  HP Color LaserJet CP2020 printer - image quality problems

  You can also read the following article and check:

  How can I check my ink or toner levels?

  Hope this information is useful.

• HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

  Hello

  Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

  It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

  Any suggestions?

  Thank you!

  Hi, thanks to send additional information.  It really helped.

  The following is taken from the User Guide which can be found here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

  The message that users see is a Media fast charge.

  On Page 198, there is a section on the message they see.  It also includes measures to address the message.

  

  It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

  For step 2 to verify the media guides see page 97: "setting up trays of food.

  When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

  You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

  Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

  What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

  Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

  (Edited to remove extra lines)

• Color LaserJet 2605 does not print

  My ColorLaserJet 2605 was printing very well - I finished work, then fed the following work and therefore, everything he says "print document" with the green light flashing - but nothing ever prints! I rebooted, reinstalled, nothing changes - it lights, initializes, said it's "Ready", and then when I try to print a 1 page, simple text without color or photos document, I get the same situation of non-printing - saying the document print, but nothing prints ever. Any suggestions? Thanks in advance! Aggie 55

  First, go to the reports menu on the printer and see if you can print a configuration page. If it works, check your driver. If this does not work, then you can be problems to trainer.

• using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

  using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

  I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

  Please consider trying this as a possible solution:

  (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

  One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

  After installation, try printing again.

  The output I have indicates it will print is more negative.  Please let me know if you have success.

  One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

• Yosemite and hp printer color laserjet 3600n hp office jet pro 8600

  Hello

  I've updated the maverick at yosemite. The last update for the printer software has been installed (version 3.0 on October 1, 2014). But both printers not working anymore.

  Color laser jet 3600n stops after 10% of printing with the PCL XL, subsystem kernel error, error: data, missing operator: sole source, post 14.

  With the OfficeJet Pro 8600, it is quite similar. The printer starts loadin page. After a few minutes the printer push the empty pages. In both cases the Mac lost the connection to the printer for a while. After a few minutes the connection is established.

  The system is OSX Yosemite 10.10

  Color LaserJet 3600 driver version 2.0.3

  connected to the cable / Hello

  Serial number [personal information deleted]

  number of Procuct Q5987A

  OfficeJet Pro 8600 N911a

  connected without wire/Hello

  FW-version CLP1CN1322CR

  Serial number [personal information deleted]

  driver HP Officejet Pro 8600 2.0 version

  Product CM749A number

  Information device of the HP utility software.

  A response in the German forum was helpful:

  • reset the printing system
  • Reinstall the printer HP (HPPrintDriver3.0.dmg) update
  • restore volume access rights,
  • Restart the system and
  • Reinstall the printers

  After that, the two printers works previous.

• need printer driver for HP Color LaserJet 3600n running Windows 8

  Need printer driver for HP Color LaserJet 3600n running Windows 8

  Click Next if you Win 8 pro 64-bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&TaskID=135&swEnvOID=4132

• Windows 7 and HP Color LaserJet 3600N

  HP did better still.  No Windows 7 for Color LaserJet 3600n driver!  You can fill in the blanks...   However, using Windows 7 Professional, I could install the XP drivers.   Download software XP and it runs in a virtual XP session.  I then added the printer as Windows 7 would cause you to do.   The add-in has not completed correctly - CTRL/ALT/DELETE.  However, the printer has been added, and it seems to work.   Maybe HP and Microsoft are pushing the broader Windows 7 Professional.

  Hello world

  Download and install the software the complete solution for this printer on the link below.

  Complete software solution for the HP Color LaserJet printer series 3600

  HP LaserJet - support Windows 7

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  Hello DavePerdue,

  Thank you for your message.  Click HERE for your driver from the HP website.  It seems that it just took some time to get the driver online and available for download.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M30X-134 - I'm looking for a new motherboard

  Hello

  I m looking for a new motherboard for my satellite M30X 134! I was offered one with K000019680 number with the advice that this one is for all laptop M30X Toshiba. I m a bit irritated, because my thoshiba operator told me, that I need one with the number K000019210. Could someone tell me, if the K000019680 also goes very well with my laptop?

  Best regards

  Armin

  Hello

  Looks like you can use both of them, it is perhaps better to use K000019210. on this way, you'll be on the safe side.

• You are looking for a new graphics card with 1 GB of memory for Satellite Pro A10

  I am looking for a new video card with 1 GB of memory, preference but is RIMM memory ram in my office, but has a different type of memory in the description of the video cards.

  Is it important at all, the video card would work always?
  Thanks 1million
  Stephen

  I put t know exactly what you want to do, but I assume that you need this card for an upgrade.
  New bad guy! Laptop graphics cards are often fixed on the motherboard and cannot be deleted!
  In addition, you must know that the mobile graphics cards are simply different and you can't compare these chips with adapters for desktop PCs.

  Best regards

• Satellite A100-204: I'm looking for a new battery

  I'm looking for a new battery for my laptop, but I have no idea where to find... And yes I already searched on google and most of the time that it brings me to canada, but I don't know battery that fits mine.

  I ordered once, but it didn't fit. They said that I should ask toshiba.

  The one that accompanies it is PA3400U-1BAS.
  I would like a battery that of at least 6 hours, or more...

  I hope someone can help me.

  thnx in advance
  JK

  Simply visit Toshiba Europe site and visit the Options & accessories.

  http://EU.computers.Toshiba-Europe.com/-> Products

  There you choose model laptop, and you will get the site with compatible parts.
  There are all batteries compatible and supported listed.

• Looking for a new lens

  I have a T1i and am looking for a new lens for an upcoming trip to Italy.  I am currently using a 28-135 as my lens every day and wonder if it is better to use as my daily lens out there to be able to capture the sights.  I'll be bringing in a 50 mm fixed, but do not want to be bogged down with too many Lenes

  The EF 28-135mm f/3.5-5.6 IS USM is a great lens.  I'd be willing to take just about anywhere.

  You said that you have a 50mm f1.8, I think.  I would take what you have and add the EF-S 10-22mm f/3.5-4.5 USM or the new lens EF-S 10-18mm f/4.5-5.6 IS STM.

  But the EF 28-135mm f/3.5-5.6 IS USM and the 50mm f1.8 will cover "more" than what you need.

• I can't load anything, told me the file type Wizard get safe software suggestions or you do not have a program installed that can open your file, either you are looking for a new matbe

  When I try to load anything my computer it says secure file type Wizard get software suggestions. You do not have a program installed that can open your file, or you may be looking for a new

  Hello

  · What file you load?

  · If it is saved on the computer? If so, what is the location of the file?

  · What is the service pack installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  · You have security software installed?

  1. check the file association is correct, you can see below the link to the same: how to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

  With regard to:

  Samhrutha G S - Microsoft technical support.