Color Laserjet CP1518ni using Win7 - need access to info level of Ink/toner

Similar Questions

• need instructions for changing the ITB on hp color laserjet cp1518ni

  need instructions for changing the ITB on hp color laserjet cp1518ni

  Hello the circus,

  Unfortunately the ITB - transfer belt doesn't seem to be a replaceable piece by customer. You will need to call our technical support at the 800-474-6836, and they can help you get this problem is resolved. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://goo.GL/kQDB

  HP out of warranty of the Support Options for HP printers selection:
  http://goo.GL/WJ1Vb

• My HP Color LaserJet CP1518ni cannot print .pdf files

  Dear,

  I have a printing problem with my HP Color LaserJet CP1518ni (function USB my iMAC), since I installed the OSX Mavericks.

  Although my printer print word files, cannot print .pdf, even through the software PREVIEW or ACROBAT files.

  It gives the break signal... any solution about that?

  It is very annoying.

  Thanks in advance for your comments or help!

  Hi Kpanag

  I understand that you cannot print the PDF files from the upgrade to Maverick.

  I'll be happy to help you with this.

  I check and repair the authorization to drive on the Mac.
  Go on the hard drive of the Mac, applications, utilities, disk utility, click Mac hardrive left side, click on verify disk permissions, when it is finished click on repair disk permissions.
  (when it's over will show disk repair completed)

  Run the Apple updates also. (the Mac uses probably drivers 10.8)

  Make sure Acrobat is up-to-date.

  If you need more simply make assistance let me know.

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• Color Laserjet Cp1518ni alignment no longer work

  I have 2 x Color Laserjet CP1518ni for about three years now. Both printers do not calibrate corretly.

  I have problems with the logos of color printing. I now see magneta shadows as a result of misalignment.

  -J' have Windows 7, where the HP difficulty tools do not work. So I use the buttons on the printer

  -But also trying to calibrate with my laptop with Windows XP on it.

  -Installed new firmware, used each menu item I hoped that might have an effect.

  -Searched and searched on the internet, I found that nothing works.

  -Does someone have an idea to solve this problem?

  Hello

  Follow the instructions below to restore the default settings, and then test the print quality. Let me know what you find?

  http://support.HP.com/us-en/document/c01530973

• Drivers HP LaserJet CP1518ni for WIN7-64

  I have the color Laserjet CP1518ni printer when I had Win Vista-32 and it works beautifully. Recently, I upgraded my OS WIN7-64 and installed the drivers recommended from HP website. I installed the HP Universal PCL6 v5.6.0, but the printer is not recognized as color and prints only in black and white.

  When I restore the old driver 32-bit, I had on vista, it works in color but does not print on the web I get an error message on a competibility of 32 bits.

  Help, please.

  After carefully reviewing the download section for the printer from the HP web site, I found that there is an update of the firmware on this printer and CP1510 version. So I updated the firmware and now it works fine, so far.

  I guess that was the problem.

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• m276nw: have a Color LaserJet printer use / print on Photo paper?

  Hello HP support.

  Although you notice that I have a few questions, since the store representative say yes to everything and barely even know the answer.

  My Question is I have a lot I mean a lot almost 1,000 sheets of paper Photo HP since a few year and decade back wasa good sale and just discovered recently hidden in my HP demo day I presented.

  * Anyway would like to know if I can use this paper HP Photo in my m276nw?

  Also HP Color LaserJet printer normally manage and work with HP Media products so if I buy another printer in which I am looking around for another AIO hope to do everything.

  I have Premium, matte, bright & Brochure paper Glossy Photo - HP makes a lot of types of Photo paper I could use them?  Since then, he does not say Laser or inkjet on the box.

  Sure I'll reach out incase I have an another question

  Thank you

  www.iOSGenius.com

  Hello

  It supports papers photo as indicated:

  http://support.HP.com/au-en/document/c03315988

  But given that the documents are old, the quality can not very well. HP produces special photo paper for Laser printers.

  Kind regards.

• HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

  Where can I find the olderdriver that I can use windows 64 bits 10,

  because a program does not with the new driver.

  The year may be 2014 or almost.

  Your Timo

  @tisalmet

  Thanks for the reply with the details,

  You can activate the Device Manager to view hidden devices by following the steps mentioned below:

  To work around this behavior and display devices when you click Show hidden devices:

  1. Click Start, point to programs, point to Accessories, and then click command prompt.
  2. At a command prompt, type the following command and press ENTER:

     Set devmgr_show_nonpresent_devices = 1

  3. Type the following command a command prompt and press ENTER:

     Start devmgmt.msc

  4. Troubleshoot the devices and drivers in Device Manager.

  For more details: click here

  Uninstall all software and drivers for printers:

  When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

  1. Click Start, type uninstall program, and then press enter.
  2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

  Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

  1. Click Start, type Device Managerand press enter.
  2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
  3. Right click on the device, and then click Uninstall.
  4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
  5. Once the uninstall is complete, restart your computer as soon as possible.

  Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Color Laserjet CP1518ni: Color RED is misaligned - won't calibrate.

  Red color will not calibrate. Large black prints - the Self Test / Configuration page looks good, but print everything that has red color in it, red is off record. Intalled software on 3 different computers - is not the computer. Updated firmware to date on each installation. Calibration ran a gazillion of times. Power reset. ToolboxFX does not open so there is no help - it is supposed to work under XP. Read the other posts that deal with the same problem, tried what they were doing to solve the problem. Nothing works. Excuse me if I seem shrill, but I am very frustrated. This used to be a great printer. It is now junk occupy space unnecessarily.

  The page contains instructions for both series of printers.  You are looking at the first set of instructions that are not for your printer.  Read the second set of instructions that are for your series.

• HP Color LaserJet CP1518ni - color alignment problem

  I'm having a problem with the alignment of different colors with my HP CP1518ni printer. Essentially colors don't print really in the same place, as the impression of Red (Magenta) is never aligned with black / yellow / Blue (Cyan) (so I can have the text in red with a black text shadow 0.5 to 1 mm below or blue with a red shadow of 0.5 to 1 mm at the top for example).

  Troubleshooting always just irritates me to calibrate, but I have many, many times over many months, calibrated and it does not help.

  Does anyone know of other solutions? Or should I buy a new Magenta cartridge and see what happens?

  My cartridges are:

  Magenta - CB543a

  Cyan - CB541a

  Yellow - CB542a

  Black - CB540a

  Make sure that you update to the latest Firmware.   HP recently released a newer version which helped with a more concise calibration with the alignment of color plan.   Many people have reported these problems solved after running the update.

  Update XP (English) can be found here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3422472#N841

• HP Color LaserJet CP1518ni - COLORS NOT ALIGNED

  Has anyone solved this ridiculous question, where all the colors are not aligned when printed?  Black text prints perfectly. But when the printing of the images, the colors are not aligned. Question lasts for months and YES I did the following:

  1. Calibrated thousand times
  2. Restored the default printer 1000 x
  3. Lost my money and has spent nearly $200 on OEM all color cartridges 4... lost!
  4. The drivers reinstalled 1000 x
  5. Have the most up-to-date drivers... believe me.
  6. Ran the printing software HP and doctor Scan and it shows me NO QUESTIONS... ridiculous
  7. Checked the Forum from HP Support with no resolution... I'm with you other people with this same issue. HP HELP PLEASE!
  8. Please tell me that it is a HARDWARE PROBLEM! Of course you won't admit it.
  9. Same problem occurs on my PC - Win 7, Macbook... does not matter... it's the printer!
  10. And finally, I posted this plea for HELP!

  Thank you HP.

  What it sounds like, it's a hardware problem. I would like to begin by ensuring that you have the firmware updated. The firmware of the printer, is what determines how the mechanics of the printer will act. If it has expired, it can cause all sorts of problems. If this does not work, try to do a hard reset. I've included a link to the firmware and instructions for a hard reset below. Let me know what happens.
  
  Firmware:
  http://goo.GL/gCXvr
  
  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Color LaserJet CP1518ni: No option to print in color / grayscale HP Color LaserJet CP1518ni

  My computer recently automatically upgraded to Windows 10 day.  I can't find anywhere is more where I can spend my color to grayscale printer or vice versa.  It only prints B & w now.  I downloaded the recommended printer driver (PCL 6), firmware, etc.  I spent hours trying to find a way print in color!  There is no option in the properties of the printer, printer properties or preferences.  Any help would be greatly appreciated because it's completely frustrating.  This was not a problem in Windows 7 for me.

  Hello @raydunc

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• Printing a color laserjet cp3505x using MAC OS 10.6.8. I can't print all the pages in the PDF documents.

  I'm having a problem suddenly with documents PDF print only odd pages. I tried to manually print even pages, but it does not allow me to do. Any thoughts?

  It is through the preview. I uninstalled overview and installed the adobe reader software. It now seems to work.

• Color Laserjet 4550 DN: Memory / Hard drive in a printer, that we need to have

  We have a printer Color Laserjet 4550 DN we need to dispose of it. We want to assure you that there is no hard drive, which must be erased or destroyed for security reasons, until we get rid of it.

  Only the hdn model came with a hard drive.  You can tell if you a looking at the back where you have run the cable to the computer or the network.  On this board there called EIO housing.  One is used for the network card and if you have a hard drive, there will be another card inserted in the slot EIO others which I do not think that you will have.  If there is another card just loosen the two screws and remove it.