Color laserjet M452dn: M452dn 2-print automatic back off

Similar Questions

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

  Hello DavePerdue,

  Thank you for your message.  Click HERE for your driver from the HP website.  It seems that it just took some time to get the driver online and available for download.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Color LaserJet M553: M553 - cannot print two-sided

  Hello

  We have a new HP Color Laserjet M553 (B5L24A) which is not allowing us to automatic duplex.  He is currently runinng via a Windows 2008 R2 server and is network connected via IP static on the Ethernet cable.

  I tried several steps of troubleshooting so far:

  -Several including UPD PS 6.0 5.8 PS, PS 5.5, PCL5 printer driver

  -Several print on print server objects

  -Confirmed the 'device settings tab' has the duplexer enabled on the local print server and print objects

  -Updated firmware for the last datecode 20150731

  -Tested printing from several applications, word, outlook, pdf, internet Explorer, textfile, etc...

  -The same problem happening to all connected users

  The printer accepts orders for manual, automatic duplex printing simply cannot.  No error messages didn't report on Panel print, printer, client or server.  Trying to get your hands on a 2nd M553 so that I can confirm a double problem or not.

  Feels like a problem with the firmware where he does not understand the command duplexing automatic normal or did not recognize the duplexer is installed.

  Any ideas?

  Your model is not the two-sided model.  The duplex model is B5L25A and will say about this M553dn not M553n who is your model.

• Color Laserjet 3600n does ' t print. Message "looking for printer." New ethernet cable - no improvisation

  Color Laserjet 3600 n does not print. "Looking for printer" message in the printer window. Tried the new ethernet cable-no improvement. Printer turned, restarted the computer and enabled printer back - no differrence.

  Internet works fine. Help, please!

  The software update referenced actually comes from Apple.  If it's not showin your software updates Apple, then you can manually download it here:

  http://support.Apple.com/kb/DL907

• M251nw color LaserJet pro 200: does print in black only, no color

  All of a sudden, my m251nw color laserjet pro 200 prints only black. Cartridges changed (C/M/Y) without modification. Toolbox shows that they are all 100%, but nothing will be printed in color, not even the Demo Page. Anyone able to help?

  Updated the firmware from hp, and it fixed the problem.

• HP color laserjet M252dw: trying to print envelopes

  Have a new 252dw. Does not correctly print size envelopes. Prints gibberish? CCM, $JcC... across from the end of the envelope.

  Hello @mcrep,

  Thank you for showing your interest in the HP Forums! I see that you have problems printing of envelopes, they come out with truncated text. I want to help you.

  Here is a document to double check all the parameters of the print driver when printing envelopes (OS X).

  I checked the website and couldn't find the Full CV drivers for this model featured with 10.11. We can check to see what drivers are installed for the printer.

  Click on the Apple menu, click System Preferences.

  Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M252dw)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Let me know how was the name of the printer.

  You will have to perhaps download and install the HP v3.0 for OS X printer drivers.

  Can you print correctly from other applications?

  What application you use to print envelopes?

  If you're still having problems, please give the steps you have taken and the results, so I can help you more quickly.

  I would like to know if these measures worked for you. You can select the 'accept as Solution' and the 'Thumbs Up' buttons, which will help us and others see that we have the answers! Good luck!

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• Color Laserjet 2605dtn - deteriorated quality printing (with images for comparison)

  I have had my HP Color Laserjet 2605dtn for about 5 years and have been very happy with it.

  But last week, I noticed that my print quality has deteriorated over time.

  I noticed by accident after the reprint of a color image, that I had already printed two years ago and after that comparison of the two it became clear that both the sharpness that the colors are not what they used to be.

  I use my printer quite often but not on this scale it might show "wear" already. I'm a teacher and so my wife and we print and photo assignments at home from time to time, but the printer is not used as a printer of office of all kinds.

  Attached to this post, you will find two pictures of the same image (a board game cards, I have DIY'ed two years ago) and you can see that the images either crisp and bright colors while the other is a little blurry and pale colors.

  I've already printed or a configuration page that is useful for the experts here determine what teard ant normal wear due to the "age" of the printer or is something else.

  Number of pages printed: 21192

  Number of pages printed colors: 5612

  Monochrome RET = enabled (not sure what that means)

  Toner hp original with black again (to see if it was the cause of my problem)

  All color toners are 25%

  The "bars" of green toner are clean.

  I hope someone can give me an easy solution...

  Thanks in advance.

  I do not see your spare part but the seal should help.

• HP Color LaserJet CM1312 nfi no print only one page (document)

  Hi all.

  I'm in big trouble with Color LaserJet 1312 nfi (on 2 PC). Printer still print ONLY a single document (regardless of the number of pages) that I can't continue. I have to restart computer or the user to login and I print a new document. Scan OK.

  PC config:

  Windows 7 x 86

  connect via the USB port (but LAN made the same mistake)

  PCL6 driver

  I tried:

  reset to factory default

  the latest firmware update

  connect via LAN instead of USB

  Print via another PC (printer sharing)

  connect the printer to the other PC (USB, LAN)

  install the drivers of PCL5

  turn off Mopier mode (not available)

  Win XP - OK (printer so no problem)

  Any ideas?

  Thank you.

  Hello.

  Installation new version Universal Print Driver for Post Script - no change.

  I tried a thousand ways and WE work:

  install driver of the old school-HP Laser Jet III from Windows Update.

  I hope it helps someone...

• HP Color Laserjet CP2025 does not print the colors in the document

  Original title: print film

  I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

  Hi DirkjeAbma,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3 color printing fails all printing applications?

  You can see the following HP support article and check if it helps to solve the problem:

  HP Color LaserJet CP2020 printer - image quality problems

  You can also read the following article and check:

  How can I check my ink or toner levels?

  Hope this information is useful.

• Color Laserjet CP2025dn "turn the printer on" error

  Too often, I try to print documents (such as boarding cards and Word documents) and nothing prints. When I run the troubleshooter, it always says that the printer is turned off! The printer is still on. I have power down (both with the button, then with the power cord). I keep getting the error. I delete the docs pending and you try to reprint. Still getting the error. Updated firmware for the printer also.

  Have you tried to uninstall and reinstall the printer using the control panel > printers and devices?

  Jim

• HP Color LaserJet 2605dn: 2605 HP prints in black

  After changing a blue and yellow cartridge, printer flashing but not print and not of documents in the print queue. NVRAM and Super NVRAM but still wouldn't print.  Configuration of network in the menu report (I'm not on a network, just a USB port on my computer) and supplies Status Page printed fine.  Tried rebooting, uninstalling and reinstalling anything does not. After trying to reports menu print a text page simple and solid black on 90% of the page was printed, no text.  After a few minutes, printer would print a blank page with only the following on this subject: GET /DevMgmt/DiscoveryTree.xml HTTP/1.1 Host: 127.0.0.1:8080.

  I looked at the pdf page to reset but return of my printer does not match the pdf page and I could not find any hole or test switch.

  It was working fine!  Until I changed two cartridges and the black cartridge is still 3/4 full.  I read on other posts on scanners goes wrong, but this seems very strange to happen suddenly after just changing the cartridge.  Can anyone suggest something before you buy a new printer.  Thank you.

  Update on the problem - the cause is not identified and I can assume only it had something to do with the Windows operating system rather than a fatal accident of mechanics in the printer.

  I was out of town for a week, the printer was not hooked; and I bought another printer HP in the meantime to be able to print (LaserJet Pro 400 which I am extremely satisfied).  HP support person called me on my cell phone while I was traveling and I asked that he call me when I'll be back and he said it would be and gave me a date and a time so I'd be available.  In anticipation of his call, when I got home, I connected the printer to my Win 7 Home laptop (64 bit) to test and it printed without fail!  No sign of the original problem.

  So what - the?  Some driver in Windows suddenly Act?  Who knows.  But the printer print documents and photos with no sign of problem.  So maybe a solution to some printer problems is unplug the printer, don't use it for a few days, plug it again and see if the problem recurrs.

  In the meantime, I am so happy with the b & w LaserJet Pro 400 that it became my main printer and I'm reserving the color HP 2605 for instances when I need color.

  Consider my problem solved unless I am writing again she reappears!

• Color laserjet CP1525nw will not print in color

  I installed the PCL6 and PostScript drivers on my Surface Pro 3 to print to my LaserJet CP1525nw color.  The printer is connected to my router.  The printer prints, but only in shades of gray.  What can I do to be able to print in color and continue to print through my router?

  My printer is connected via USB. I installed the full version of the software, and everything works now. Thank you!

• HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

  Hello

  Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

  It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

  Any suggestions?

  Thank you!

  Hi, thanks to send additional information.  It really helped.

  The following is taken from the User Guide which can be found here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

  The message that users see is a Media fast charge.

  On Page 198, there is a section on the message they see.  It also includes measures to address the message.

  

  It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

  For step 2 to verify the media guides see page 97: "setting up trays of food.

  When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

  You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

  Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

  What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

  Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

  (Edited to remove extra lines)