Color LaserJet MFP M277dw Pro: Cannot connect LaserJet MFP M277dw Internet
My printer is installed and I can print from three computers (Windows 7 and 64-bit Windows of 8.1). I can also AirPrint from my iPhone.
When I install all software configuration and the driver, when it gets to a point where she wants to register the printer, I get an error message that the printer cannot connect to internet.
I can get to the control page of printer through the IP address of computers.
However, when I go to the web services tab, click Activate, it tries to connect, but then I get "connection error. Check the Internet connection. "All the other devices on my network can access the internet without problem. Because I can not connect, I can also not the code to activate the connected HP web services.
I tried with the printer connected via radio (via my wireless router very new and directly through the router broadband wireless access), as well as with a wired connection.
Everything seems to work, except that the printer cannot make an Internet connection.
That did not work. Here's what I did, what worked:
Reset the default printer.
Turn off the router, printer, and then click computer.
Restart rounter, then printer and computer.
Set the lan cable for printer (rather than wireless configuration)
The printer has obtained an ip address.
Ran the application "you reconfigure HP printer" in the folder of the software hp (Windows 7 drivers).
After that, I don't seem to have problems.
Tags: HP Printers
Similar Questions
-
HP Color Laserjet M177FW MFP PRO cannot connect to web services
I bought a HP Color Laserjet M177FW MFP PRO today and took me to the top. It can print and scan over wireless network. However, it cannot successfully connect to web services. I put the DNS numbers with google DNS addresses. I changed his IP address with manually. The IP address is unique. Normally it is not activate/remove webservices. But when I restart it, it can do for a few minutes. It may take an e-mail address, but it does not print any information sheet. When I try to print a sheet it says "Connection problem" in the first minutes, and later, he said "Connecting" and he expects, there is no error message. What am I supposed to do? Please help me.
First of all thanks for your help. I solved my problem. After that I sent this message that I've updated my firmware printers and that does not solve the problem. I called HP customer service and they help me. We have solved the problem. My router was the reason for my problem. When I reset to factory settings, the problem disappeared. Thanks anyway. I want to share my solution. Maybe it helps others.
-
Apps de Metro de Windows 8 Pro cannot connect to internet after the first reboot
Hello
I have recently installed Windows 8 Pro x 64 OEM, and I noticed after awhile that my store, Stocks, Weather, News,... cannot connect to the internet more. However, all other applications work.Even more strange, after installing all the updates, I noticed that I can navigate with my IE on the desktop, but not a single party of metro?Long story short, after several relocations (refresh option), I've noticed as a result of behavior:1. during the first start after installation, EVERYTHING WORKS PERFECTLY. I can browse, look at the weather, everything store.2. when I restart the computer and any time after that, is STOP WORKING.Another thing I noticed was that his (SoundBlaster Audigy) card didn't work the first time, but after rebooting, it worked, so I guess something happened after the first reboot?It was a clean install (OEM version) and Windows are activated, and I tried signing in with or without live account (no difference).Help me please, since this is quite irritating :(Hello
I finally found the problem.The invisibility of the active network has pushed me towards the answer.biggest mistake I made was using the option refresh windows, because it was useless for my troubleshooting.By mistake I chose my first install, public internet connection and the course of the updating of the system did not ask see me that.In defining the private connection after clean installation (No refresh, brute force reinstall) makes everything work after reboot and completely solved the problem for me.Why the network does not disappear after reboot? It's something weird, and it shouldn't happen!The resolution of network problems found no problem, because the internet connection worked, but he had no problem with no network also appear or metro apps does not.This should be corrected, as it would be a great help in this scenario.TL; DR: Make sure you set your connection on the private sector, or windows becomes crazy and your metro applications do not work (and I also noticed that visual studio could not deploy projects in this scenario, but that's another story). -
HP LaserJet MFP M425dw 400 pro: cannot connect to the printer via USB
Hello
My problem is as follows:
Since December 2014, the HP printer has been connected via USB to the desktop (at the time using windows 8.1) and by the network to other computers. The problem is with the 10 windows desktop where it is widely used for double-sided scanning.
Yesterday morning I came only to find out that HP will not work in no case with Office for Windows 10 USB - connected, changed the ports that are 6, the cables, the office will say it is not connected. However, it connects through network for printing but not scan, it gives an error about Scanner HP not connected but will scan with Windows Scanner and fax with the printer using the scanner for the work of network folder - which can not scan two-sided.
I uninstalled the driver, reinstalled with HP Support Assistant / downloaded directly from HP, same thing. The problem is that it be increased to 99% on the screen that shows the connection to the printer (the one detecting the USB cable) when it will say:
"
Error
A Setup operation took too long to run. It is a fatal error, preventing the use of the product.
If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. »
I tried the original shipped with the printer CD, it gives the same error message.
If anyone can help I will be very grateful. Thank you!
Too bad! Fixed it myself using the Hp Smart Install supplied with the network interface of the printer.
-
Laser Jet MFP M127fw Pro: Cannot connect printer Aio App
I can print via wifi from the printer, but the remote Aio app will not pick up the printer. The installation of word does not appear in the name of the printer.
Hello
The HP Laserjet M127fw is not supported by the HP AIO Remote application, not for scanning, or for setting up the printer on your wireless network, any application supported by your printer, is listed below:
http://support.HP.com/RS-en/document/c03722645
What task you want to achieve by using the application? as there could be another option for your printer.
Kind regards
Shlomi
-
Windows 7 Pro cannot connect to the network when idle too long (large company)
We have approximately 75 users on Windows 7 Professional. About two weeks ago (and the next day, Windows updates have been deployed to all PCs in our outside IT), the vast majority of users (but not all) have started to have a problem in what they can connect first thing in the morning; However, they immediately get an error that are not connected to the network, that network drives can be connected, they cannot access the internet, etc. A reboot solves problems and the problem will not recur until the computer is left idle during the night. Our outside IT says that what is happening on several client sites that they manage, but they have no idea of the cause; they are theorizing that it's maybe a botched Windows Update. I have Windows 7 Pro at home and did not have the problem once. Any suggestions appreciated.
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
Satellite Pro U400 (XP pro) cannot connect to the wireless network
I got a U400 straight out of the box. I installed XP pro through the disc of recovery without any problem, except that I am not able to connect to the Wi-Fi here. (Other devices connect very well so the problem is at the end of the laptop) I tried to update via windows update (SP3) via a wired LAN connection but still the same problem. Other posts here have any suggestions for downloading new drivers from realtek. All of the solutions presented do not work for me. Anything else I can try?
I am able to see all the wireless networks that are available in the range and may try to connect (provide the WPA password) but after watching the "preparation to connect" screen for a while he seems to abandon without reporting any error
Hi guys
First check if you are using the latest version of the BIOS.
Second, clear all options of the router WLan security (filtering by MAC address, Firewall, encryption of WLan, etc.) and try to establish the WiFi connection.If you're going to succeed the problem is certainly related to the encryption settings
Step by step, activate the settings and set up the router again.Good luck
-
MacBook pro cannot connect to hp2035n
My daughter is at school and has a macbook pro computer running leopard OSX. She was using a printer hp2035n for all of the last sememster. She just got back to school and now it does not connect. She called apple and they say it's a problem of hp. HP said its a matter of apple. Yikes!
I need to know what I can say to do in order to get them to connect. I have deleted the printer preferences, disconnect from it... wait and then try to reinstall everything, but the laptop don't recognize as being there at all. Apple got it to download all the new drivers and others. I'm just lost. ANY help with some good guidelines, I have try would be very helpful because I'm far away and she now walk all over campus to use a printer in the library.
Thank you all in advance that could get a glimpse!
We will restore the print system:
-Go to System Preferences > Print & Fax
-Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks. -
Unable to connect to the internet problem occurring 4-5 days. I downloaded the appropriate drivers for networking of hp, but the installation is not completed successfully.
Is this single driver issue or maybe a hardware failure such as network card?
Help, please!
Hi @Ajay_91 ,
Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion g4-1204nr Notebook and Wireless issues since the update to Windows 8. Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system like the necessary driver updated.
If this does not work, try right click on the driver in the Device Manager and driver rollback. If no driver to a restore to update the driver.
Hope this helps you.
Thank you.
-
MacBook Pro cannot connect - bug disabled user account
When connecting my user account is disabled.
Went for lunch is returned and locked onto the screen saver.
I can't find the account on the command line (cmd S) and I ran fsck to control the player.
You ask for the password after sleep checked safe? You have active FileVault? If you restart will it then allow you to connect? If this is not the case, try safe mode. Replace with the SHIFT key down. You could then go to System Preferences and disable the sleep mode connection.
-
Cannot connect printer to the internet for instant ink service
Installed Flash cartridges for the first time to my printer Officejet Pro 8610. The printer prints very well, but it is not connected to the internet by message on the printer screen. I checked the connection to the wireless router and it is connected correctly. I can also print from my remote legacy, iPhone, iPad, etc. "When I try to connect to the internet the printer, I get the following message appears on the printer screen.
"Update conflict
Web services and the HP printing software are updated on the computer or the built-in webserver (EWS). Wait for the update to finish and then try again. »
When I go on the 'connected' site, it shows the registered pronter but it shows that the printer is "offline". When I try to update, nothing happens.
Thank you very much. Worked the first time.
Steve Raimondi
happytohelp01 wrote:
Hi @sraimondi,
Welcome to the Forums of HP's Support. I see that you get an error message of connection on your printer Officejet 8610.
Please define Manual of the printer an IP address manually and DNS servers. I've included a link to another post which has the steps with screenshots on how to do it.
Please let me know the results.
-
My computer now has internet but my laptop cannot get any internet without ethernet cable. When I troubleshoot, my device is also unrecognisable.
Hello
1. who troubleshoot steps did you try?
2 did you change on your computer?
Method 1:
I suggest you to see link and check.
Windows wireless and wired network connection problems
Method 2:
I also suggest you to see link and check.
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Troubleshoot low wireless signal quality
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems
-
4700 c: cannot connect my 4700 PSC Internet
the printer has lost its connection WiFi to my Time Capsule (Airport Extreme) yesterday evening. Just off Tunred on and unplugged replugged. No help. It prints a HP network configuration Page that says that it is offline.
Don't know what to do. I can't control the printer from my computer because it is offline.
Hi @BrucePL
Welcome to the Forums of HP's Support. I understand that you experiencing some network problems with your printer. I would like to help.
Try to go through the following document. Printers HP - printer keeps Wi-Fi connection.
I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!
-
my laptop cannot connect wirelessly to the internet with the built-in wireless adapter
G50-118NR my client specification identifies my network home qwest DSL WPA2 as public wireless whenever I connect wireless using the Atheros AR5007 802 wireless network adapter. 11 b / g WiFi and does not connect to the internet. I can change the Private type, but it does not help. I have restored the laptop using Vista Home Prem 32-bit recovery CD and that did not help. The wired connection works perfectly and other 'g' and 'n' USB wireless adapters also work very well.
Hello:
Please read my post on the link below for the Atheros cards and newer routers, and see if you install the latest Atheros driver I posted on it works for you.
Paul
-
Cannot connect on CC, no internet connection
I installed CC on a new machine and install CC with my connection to Adobe that has members for CC. The login window says "please connect to the internet and try again", although it works and should be fine.
Use any type of firewall software that could have an impact on the creative cloud desktop application to connect? I recommend you review the steps in the sign, activation, or connection errors. CC, CS6, CS5.5
Log, activation, or connection errors. CS5.5 and later versions
Maybe you are looking for
-
How do I forward my texts from my iPhone to my iPad can't find the options in the settings?
-
iCloud account associated with an abandoned email account and password
My iCloud account is associated with an old email address that is no longer valid. I do not know the password, so I can't get access to it for backups, etc. The password that activates my AppleID doesn't to iCloud account - which included a previous
-
All the places in the United Kingdom with the Z store bike?
Don't know if it's in the right forum, but I would have a real phone idea, even if this isn't a deal breaker...
-
BlackBerry smartphones can NOT CONNECT to INTERNET
HI I HOPE SOMEONE CAN HELP MY BLACKBERRY CURVE 8520 ALMOST WALKED OVER TO THE SANDBOX. IT DOES NOT CONNECT TO THE INTERNET I TRY IF THE BB BROWSER OPTION AND WHEN I CHOOSE GOOGLE IT CONNECTS. I HAVE ONLY A COUPLE OF DOWNLOADED APPLICATIONS AS THESE
-
In case of problems when you update of Cloud Creative applications.
I'm currently updating creative Cloud applications now.But no matter how many times I put the adobe Creative Cloud login password.I can't go further and change it.I wonder if it is the correct password or do I need a different password update creativ