com.tangosol.util.ServiceListener does not

Similar Questions

• What is com.tangosol.util.Dequeue?

  Can I use a com.tangosol.util.Dequeue to allow a producer put objects into a consistency supported dequeue while other consumers are atomically made him?
  
  Thank you
  Andrew

  snidely_whiplash wrote:
  Can I use a com.tangosol.util.Dequeue to allow a producer put objects into a consistency supported dequeue while other consumers are atomically made him?

  Thank you
  Andrew

  Hi André,.

  This class is not a queue, supported by coherent caches. It is simply a double ended queue similar to java.util.Dequeue introduced in Java 6.

  Best regards

  Robert

• When I get a message on my computer it come say arccon.dll does not work how do I fix this proplem.thanks.

  www.arcCon.dll. He says it does not work.

  http://pcsupport.about.com/od/findbyerrormessage/a/arccon-DLL-not-found-missing-error.htm

  Arccon.dll not found error resolution

  Read the above.

  See you soon.

  Mick Murphy - Microsoft partner

• Add PCI Parallel port card for PC comes with no port does not print.

  I recently got a few new computers that were shipped with Windows 7 Professional. I forgot that they do not comes with a parallel port.

  These computers are intended for a point of sale application, which requires a matrix printer. First I tried USB to parallel to connect the printer, however, this does not work, because the printer is not smart enough to identify itself, it will not appear as a printer.

  My next solution was to add parallel ports via PCI cards. The card installs very well, and Windows 7 detects the drivers for it and installs. No errors appear in the Device Manager, but a couple of weird things happen.

  1. the device manager gets the parallel ports under Ports (COM & LPT) but it also gets a "multifunction adapter" in a different section (not in front of the PC now, so I don't remember which.) Both devices appear to be fine and report that they are working correctly.

  2. under "Devices and printers", I get 1 (or in the case of a card dual parallel port, 2) ' Microsoft aw Port"devices.

  I then install the driver from the printer and add the printer to "LPT3" which is the device of parallel port added in Device Manager. Print a test page, and... Nothing. Open the print queue and it is empty. Try printing a test page, and it will appear briefly in the queue and disappears, just as it would if the print job was successful. If I try another device, it (as expected) reports an error that the device does not exist.

  Although it does not directly concern, article in the knowledge base at the http://support.microsoft.com/kb/883253 seems to describe some similar circumstances, enough so I wonder if there may be a connection. Maybe the parallel port arbitrator is not installed in Windows 7 by default if the PCs have no one? If this is the case, how do I install it?

  If it's a goose chase wild... Well, that's why I asked the question.

  Help!

  Well, call it weird...

  I found an another USB to parallel adapter, rather than trying to directly convert the printer, it installs like a USB IEEE1284 adapter. (If it's a USB parallel port). This appears also in the 'ports and devices', but as an adapter of 1284. Try the printer. Bingo.

  Here's the weird part. Once Windows 7 installed the drivers for this device, I unplugged and then reconnect the printer parallel port PCI. I changed the printer I have installed (on the USB001 device) unit LPT3 and bingo. It still prints. He continued to work even with the unplugged USB adapter.

  So I strongly suspect that there is some kind of pilot missing for a missing parallel port, which Windows 7 don't think he needed to use a PCI parallel port but he knew that she needed a USB parallel adapter. I only wish I knew precisely what pilot that he was. Maybe this will give some clues so people who know Windows 7 might be able to understand. I'm more than willing to answer questions if anyone wants to know what really happened here.

  For memory, the sequence I went through was: I tried the printer (installed with the drivers from the manufacturer for Windows 7, 32-bit) installed on LPT3 device which Windows 7 acknowledged the parallel port as a map. Checked the symptoms that I have stated above. Print job appears to be completed, but the printer does nothing. Uninstalled the printer. Plugged in USB to parallel adapter, expected for Windows 7 recognize the device and install the drivers. Plugged into the printer (PnP does not.) Install the printer using the same drivers as before, but using the USB001. Printer worked. Disconnected the printer from the USB adapter and reconnect the parallel port card. Changed the printer to use LPT3 Ports print configuration tab. This time, it worked.

  Repeatability, I did the same thing with the other parallel port PCI card and a similar printer on another position of the same work. This facility began with the installation of map of parallel port PCI first, then followed the same sequence, with the same results.

  So, my problem is solved, but I think that it is unreasonable to plug a USB adapter for a PCI card.

• Utility HP does not work with the new update of Mac software

  I downloaded the latest version of the software for my Mac and now utility HP will not work! Any advice? Thanks, Chris

  Hey Chris. Looks like you may have the old software out there which is not compatiable with the new version of Mac OS X. What I would do is a complete uninstall of the HP software you have. Let's try this:

  We will uninstall with the option 'raccoon' like this:

  1. go in Applications/Hewlett Packard / click on uninstall HP and click on continue

  2. Select your device in the left pane
  3. hold the keys Ctrl, Opt and Cmd and click on uninstall
  4. There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  5. click on continue and let it finish

  Now run a software update. Before doing the next step make sure you connect your printer to the computer through USB. Then click on the Apple in the upper left corner of the screen, then clicking on software updates.

  If my instructions don't do because here's a little video to help out you:

• Run the utility Chkdsk does not solve my problem. What should I do next?

  I'm running an Excel 2007 worksheet by using the extensions both on a zip drive .xls and .xlsx.  I tried to open the two files on my PC at work, using Windows XP SP2.  I received the error message that "Excel cannot open the file because the file format or file extension is not valid.  Check that the file has not been damaged and that the file extension matches the format of the file. "I ran the utility twice using the following process: desktop > click the drive where the file > properties > tools > check now > will search for and attempt recovery of bad sectors.  When the disk check process is completed, a dialog box appears that reads "check disk is over."  No exit code was given at the end of each race.

  What should I do now?  BTW, I ran the Recovery Toolbox for Excel.  Read message "the file or directory is corrupted and unreadable.  Please run the Chkdsk utility."

  Thank you

  Nathalie

  Yogi,

  You should always start your own thread, even if you think that your problem is exactly 'the same' as the issue raised by the original question.  After all, if you have had exactly the same problem, you should be able to use exactly the same solution and should not be asked.

  The data retrieved by chkdsk may or may not be usable.  The simplest data - for example, a plain text file - the more likely a file retrieved will be usable by the appropriate application.  More complex data - such as files created by Excel, Word and Powerpoint - may lack the essential elements of the formatting of the data that can make the unopenable file.

  That said, you need to rename a data file retrieved with the extension (3 or 4 characters after the dot) appropriate for the application you want to use with the file.  For example, if you see a file named Dec12Letter.chk, and you know that it is a Word file, rename it to Dec12Letter.doc.

  For Excel files, use .xls and Powerpoint, use. ppt.

  If you are using Office 2007 or 2010, use 4 letter extensions: docx, xlsx, pptx instead.

  You can also consult: http://www.ericphelps.com/uncheck/ or other utilities of this research: http://lmgtfy.com/?q=recovering+files+from+chk+files

• Column Salary to come in the form $ does not time?

  Trying to get this works, but can't. Help, please. You will need to get the column Salary to come in the form $ instead of the time. Whenever it is multiplied by 12, it ends by multiplying by time and not by $12. So I'll take 48 h 0 m instead of $48. There are some pictures of what I am trying to accomplish. There's a picture of what is happening and another pic of my formula before you enter the time in time and get the product duration under treatment. Help, please. Thank you

  

  

  E SALVATION '

  You multiply at a range of a number. The result is lasting. That makes sense, if you do 15 minutes (duration) of exercise every day for five days (number) you have made 1.25 hours (duration) of exercise.

  For a numeric result, you need to multiply a number (hours) by a number of $ / hour. Your friend here is DUR2HOURS, which converts a duration in a number representing the number of hours:

  

  Kind regards

  Barry

• Utility RAID does not work after upgrade to Vista

  Hello

  I have a Qosmio G30 with 2 HD 120 GB each. After that I've upgraded to Windows Vista Windows XP, Toshiba RAID Utility no longer works. In Windows XP Home Edition, it worked OK, but in Vista, there is no way I can reflect the HD. In other words, the utility itself works, but the button that should say mirror, or something like that is not displayed. I put the RAID-1 disks in the BIOS, but no go.
  Is it possible to get the software RAID to work again?

  Hello

  just a quick question: during the installation of vista, is that you have installed the RAID driver installation? Maybe this could be the reason why the RAID can not be activated properly.

  Please give some feedback, if you have installed the RAID for Vista drivers during installation...

  See you soon

• Function of the file/etc/Upload of an open file of the application, using the file as a utility Explorer, does not work on my Win7 PC.

  If I run the file Explorer (open) by itself right clicking the my computer icon on the desktop, or work when I double click on the shortcut to My Documents on the desktop, all files are visible (except the system and hidden files, by default, of course). I don't think it's File Explorer itself, for reasons described. It must be an add-on, or ACCELERATOR, as it is called when this functionality is provided for other applications or the Internet Explorer browser. 10, IExplorer even the fact when I want to attach a file to an e-mail in the tab of the mail.live.com browser or dialog box that prompts for a download location and the source file. The only place where I can browse the file Explorer to display its content, is the office. I have automatic updates for all my Windows software installed on my PC, as well as for all my applications. This happened for months, and the only work around is to copy the files to the desktop, take them out there in my app/browser and then delete. It's a pain in the thigh not only because of the increased workload, but also because my OS is running on a very small SSD drive (128 GB), reserved for the windows and the user * he pours on the system drive. All this extra activity write/erase on my system drive is exhausting the ability of my SSD FLASH prematurely. All my software is installed (when installing allows) on my D: drive, but it has been so since I ran Windows 98, it is NOT the cause of the problem. Any help will be appreciated!

  Hello

  We will analyze and identify the cause of the problem.

  Method 1:

  You can run the Fixit described in the article:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag

  Method 2:
  

  Safe mode

  
  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Response with status so that we can help you.

• Acrobat 9 Standard comes with the scanner does not install

  My serial number for the grouped Acrobat 9 Standard is interpreted by Adobe as an upgrade.  I can not install without evidence of an earlier version - which, of course, I never had.

  The scanner is a Fujitsu fi-6230 (big machine).

  I have just upgraded to Windows 7 and need to reinstall Acrobat. Would prefer to save the expense of a full version - I thought to upgrade after installation of level 9.  But here I'm stuck on zero.

  All the words of wisdom would be appreciated.

  You can try to talk to Adobe Support by chat or phione to see if they can solve anything of it.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

  If the software is delivered with an upgrade serial number then your only hope is likely to be in contact with people from scan to see what happens with that.

• The load utility block does not call the PostProcessHandlers

  My PostProcessHandlers works fine when I create or update users. But when I use the load utility block to create users, the PostProcessHandlers are not called.
  
  How can I call the PostProcessHandlers whenever I use the load utility block to create users?
  
  Thank you

  He will not call. It is the way it was designed.

• [TRE] I tried to use the system of TAR utility (compress does not)

  As above, I use system() to call the "TAR" command, it works with - cf, I tried to add compression using - z and the archive has not been created, I use test.tar as the example of name of archive and the file has been created, but it seems to be empty, use it without work - z if.

  zip is there but in/usr/bin, so you can compress in a separate step.

• BlackBerry.utils does not properly

  Blackberry.utils package does not work as described in the last SDK WebWorks.

  First, the space of names so that it won't, according to documentation, it should be Blackberry.utils, but it's actually just "Utils" (at least for me). Bar package manager can not find a feature with the id "blackberry.utils" unless you manually change the manifest to say "blackberry.utils" instead of just "utils".

  But even in this case, missing funtions as blackberry.utils.stringToBlob.

  For this reason I cannot create/save/load files using the SDK WebWorks, is this a problem on my end or there at - it something wrong with this version of the SDK? (I already tried to reinstall)

  Ah yes, that would explain then. The Utils API is not available on BlackBerry 10:
  https://developer.BlackBerry.com/BBOS/HTML5/APIs/BlackBerry.utils.html

  It was available on BBOS and PlayBook. If we check the BB10 docs, it is more listed in the API reference:
  https://developer.BlackBerry.com/HTML5/APIs/

  To save/load/create the files using the SDK software BlackBerry 10, we now have the HTML5 Filesystem APIs, which shouldn't require the Utils APIs:
  https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.IO.html

• Designjet 110Plus NR: HP Designjet 110 Plus NR Maintenance Utility does not detect printer

  Hello

  I have a Designjet 110 Plus NR printer that prints, but when you use the maintenance utility, it does not detect printer. I downloaded the latest version H.06.0 and am able to install it. but when the search for the printer it will not find it, and I have no way to pinpoint it too my printer. I have the printer connected to my computer via the USB port on a docking station HP residing in my laptop (Elitebook 800 G1 win 7 pro x 64). Also, it is connected via a parallel to the NIC dongle to make it available on the network for everyone to print too so. All can print, I can print but the Cyan is not always print and before you buy new print heads, I would like to clean and align with the Maintenance Utility. I tried to use the printer in the dock station, plugging directly into the laptop and the network to connect, but won't find printer. I tried the alignment of the front that I found in other forums, and it did not work. Whenever I went to the printer, I uninstalled all drivers and and the computer and rebooted system maintenance utilities. I installed the drivers from the HP website, from the disc initially supplied with the printer and our network, still no change print server. Am still able to print but not to run diagnostics or alignments. I've scoured the forums HP and all the "recommended" patches have never someone who in fact confirms the
  'Fix' worked. Can someone help with this problem? It has been about 4 days that I'm looking into this and frankly it's kinda ridicolous saw that it's a plug-and-play printer. Thanks in advance for any advice you may have!

  Well, the network adapter has failed. I managed to install the software, but he gave a generic IP address of the printer and gave me the same mistake of not being able to communicate with the printer. So, I pulled up an old laptop XP downloaded the drivers from the HP site, rebooted, printed the test page with success and installed the system maintenance utility. And WHOLA, I saw the printer immediately in the USB of Maintenance section and was able to run the diagnostic page and determine our problem. Thanks again for your help Mike!

• NB550D - sleep utility for Win 7 does not work

  Hello

  I have the following problem: I have installed on my netbook NB550D Win 7.
  I downloaded the driver from the Toshiba website for sleep Utility, it does not work.
  He said: can not find material information.

  Hope you can help me.

  Hello

  Now maybe stupid question, but what is utility of sleep?

  What is the description of Toshiba for this tool?