Command line text editor

Similar Questions

• line break in the TEXT Editor

  How to enter the line break in the TEXT Editor?

  --

  Thank you.

  There is an easy solution.

  If you want to use the Enter key, simply hold down the SHIFT key and the Smiley key become the Enter key.

  Alternatively, if you are a fan of the typing gesture, you have need only drop off shift at entrance to y to insert a new line.

  Hope that helps. Please acknowledge.

  Concerning

• Add text from the command line to the output so that I can know how a command has been run when it generated the output

  This is a question and a suggestion...

  I would like to be able to precede or add if it works, the command line in the output file that creates the order.

  Example:

  I run dcdiag with switches, etc. and create an output file of results that gets saved or sent to a person or just put it in a folder. Of course, it could be that someone else ran the command and then sent the file. Anyway the problem is the same - what was the exact command line that has been executed to achieve these results?

  Question:

  Is there a known way to do from the command line that I can apply to any command?

  Suggestion:

  If this isn't the case, then I would suggest MS to include this function in all the BACK and PowerShell commands able to produce text output.

  If all goes well they monitor this forum and find it's a great idea and send me a check (pinky in my cheek) a meeellion of dollars. Then I and I alone will rule the world.

  Here you go:

  d:\>format i: / FS: NTFS > format.txt
  d:\>echo i format: / FS: NTFS > format.txt

• Windows of different sizes from command line

  Hello

  I'm running Firefox and - width - height of command line options. The problem I have is that these settings are ignored if a Firefox window is already open. In this case, all of the following windows are open with the size of the first (original) window. It does not matter what I type for width and height. These parameters are used only for the first window, when Firefox is actually started.

  I've mitigated it wrong before with javascript used in web pages to resize the window to the document load event. Now I have to upgrade to the latest version and resizeTo does not work on windows that are not open via window.open.

  What are the options I have to open multiple windows of Firefox with different sizes? They all use the same profile.

  We use a very specific environment, closed and controlled with a web server and not internet access. There was no need for update of Firefox 4. Now, we want to upgrade, but this change in functionality prevents us from the upgrade. Because the computers of our customers are on CentOS 5, we would be upgrading to Firefox 17 which is part of the standard CentOS 5 distribution.

  I wrote a bash script that made a list of the windows, firefox lance made a list once again. It then searches the differences in the lists of before and after opening firefox. In the end, the script uses wmctrl to change the size of the window which were found also recently opened. There is a small chance that some other window might appear while the opening of firefox and it will be be reduced too. However, in our case, this probability is very low and it is not worth.

  Here is the script which takes 3 parameters: width, height, URL.

  #!/bin/bash
  
  diff(){
    awk 'BEGIN{RS=ORS=" "}
         {NR==FNR?a[$0]++:a[$0]--}
         END{for(k in a)if(a[k])print k}' <(echo -n "${!1}") <(echo -n "${!2}")
  }
  
  window_count=$(wmctrl -l | wc -l)
  
  windows=()
  
  wmctrl -l > output
  
  exec 0<output 
  
  while read id type machine name
  
  do
  
    windows=("${windows[@]}" "$id")
  
  done
  
  # width and height in this call are ignored if some other firefox window is already open
  
  /usr/bin/firefox -P profile -width $1 -height $2 -new-window $3 &
  
  new_window_count=$window_count
  
  while [ "$window_count" -eq "$new_window_count" ]
  
  do
  
    #echo waiting...
  
    sleep 1
  
    new_window_count=$(wmctrl -l | wc -l)
  
  done
  
  new_windows=()
  
  wmctrl -l > output
  
  exec 0<output "$id")="" "${differences[@]}"="" $i="" -e="" -i="" -r="" 0,-1,-1,$1,$2="" <="" differences="($(diff" do="" done="" for="" i="" id="" in="" machine="" name="" new_windows="("${new_windows[@]}"" new_windows[@]))="" pre="" read="" type="" while="" windows[@]="" wmctrl="">
  
  done
  
  I had to do some tweaking in the script to fool the HTML editor. Some formatting of text is performed, that is not source friendly. That is why the script might look formatted strangely.
  
  </output>

• Take possession of the key to register via command line

  Is there a way to take ownership of a registry key without having access to the registry? Editing the registry is disabled, I could activate normally using command line, but I don't have permission to change the key. I was wondering if so there is a way to take possession of the key by command line, so I can set the button to activate the registry change.

  Give this extract a whirl:

  ... If the registry editor has also been disabled, you will not be able to run registry changes to fix the rest of the problems, then you must first activate the command registry editor run.  Even if the registry editor is not broken, these commands are safe to run.

  Click Start, run and enter in the box (copy/paste would be safer) the following text:

  Tracking Add HKCU/v DisableRegistryTools /t REG_DWORD /d 0

  Click OK and answer Yes, if you are prompted with a message of crash.

  Click Start, run and enter in the box (copy/paste would be safer) the following text:

  Tracking Add HKLM/v DisableRegistryTools /t REG_DWORD /d 0

  Click OK and answer Yes, if you are prompted with a message of crash.

  Now try your registry editor.

  If you inflict not on purpose to this situation on your system, no doubt there are other things on your system that are also affected... we can fix them then.

• Development of a non-conventional modal text editor: can I use "JTextPane?

  Hello everyone, my name is Jason and I am a new Java programmer. Although Java isn't my first programming language, I have very little experience with GUI design and development is, so Swing is exciting and a little daunting to me.
  
  I started on my own project: a modal minimum with a GUI text editor designed to keep your hands on the keyboard. My question relates to the design of the GUI: I wonder if I should use a 'JTextPane", or roll my own component.
  
  This will be the main features of the program:
  * It will be modal, rather like vi, that it has a mode in which the text is inserted and another separate mode in which all keystrokes are interpreted as commands.
  * In General, the command mode will have orders to move the caret, scrolling of the window and change the text, each more or less with respect to the following units: character, Word, sentence, paragraph, line.
  * All the keystrokes of the order will be fully customizable and, by default, to comply with a provision which is great for being able to edit, but quite unconventional.
  * All text will be displayed in the same police, but if I'm about to implement syntax highlighting that could change. At the very least, I want to be able to change the color of the text.
  * Unlimited undo/redo.
  * Capable of editing files of any size.
  
  I went through the Java tutorial on "text components using the" (http://docs.oracle.com/javase/tutorial/uiswing/components/text.html) and got a bit familiar with the components that are available. For my program, "JTextPane" seems a good choice at first sight, but I do not know...
  (1) I read that "JTextPane" s are running well with great content. (Maybe I could get around this by breaking a large file into several pieces.) I can't verify if it's true or not, but I've read that people who develop JEdit rolled their own solution to work around this problem.
  (2) "s JTextPane" are not modal.
  (3) it seems overall, I do a lot of customization on a 'JTextPane"so that he can accomplish as I want.
  
  So, here are my questions:
  Do you think that a "JTextPane' is a good choice? I have to learn the "JTextPane' inside and outside in order to know how"bend to my will?
  Or I better off rolling my own solution, would use a "JPanel" and a "KeyListener" or something like that?
  
  And if you think I should use a 'JTextPane", if you could kindly give me some general advice about where I could start with the customization required, would be great.
  
  Thank you for taking the time to read this long post and thank you in advance for any help!
  
  Published by: Jujubi on April 8, 2012 17:25
  
  Published by: Jujubi on April 8, 2012 17:26

  I would say that this is not the right choice. It is slow with large files (several megabytes). It assumes several functions (pieces of text with different font sizes) calculation is slow so you don't really.

  I would choose JTextArea with view to support colored pieces. You, the calculations of sizes are really faster because you have monospaced police and all the pieces the same size of tank.

  To highlight, you can use highlighter/HighlightPainters.

  If you always the JTextPane is good to read the article of http://java-sl.com/JEditorPanePerformance.html on improving the performance.

  JTextArea or JTextPane are modal. You can place them in a modal JDialog.

• Why the unwanted code (div/link64_adl_tabid/number) is added in text editor (ckEditor, WordPress, etc.)?

  Recently, I noticed that when I work in WordPress, or by using a text editor in line, or technical support anywhere, I'm hidden code added at the bottom of the text box:

  521

  I downloaded the extension of all professionals of Downloader which is on your list and it indeed contains the code to create and read this div with the id "link64_adl_tabid" (in link64_adl_overlay.js, one of its component files).

  That should not affect a textarea field basis, given that the code adds to the body of the document. In a rich text box, however, you change a small independent document, so it makes sense that he gets injected into the Visual Editor.

  The author of the add-on could probably fix this by adding only not the div to a document which is contentEditable has. But I do not recommend trying to fix the extension yourself.

  Could you try to disable it and test again? You can do this on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, when in doubt, turn off.

• When you sell an item on ebay it has no text editor tool bar using firefox, but this toolbar is present using IE. Is it a default or can be fixed or added?

  There is no text editor when you type a description of the items I sell on ebay with Firefox, but there is an editor (toolbar) using IE. Firefox fix or complements for ebay sellers?

  Your string UserAgent in Firefox is marred by another program you have installed. Maybe eBay cannot know that you use Firefox 3.6.23.
  
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  
  If you see the warning, you can confirm that you want to access this page.
  
  Filter = general.useragent.
  
  Right click the preferences that are "BOLD", a line at a time, select reset.
  
  Then restart Firefox

• Arguments for command line for TestStand tools

  If I run the user interface of the command-line like this:

  

  I get this:

  

  Now, I want to create a tool.  Then in the sequence editor, I go to tools > customize...  Then I add a command tool pointing to the executable of the user interface.  Then, I try to pass an argument as I did on the above command line.  -Help!  It doesn't seem to work.  I tried with quotes, without quotes, with a space without space, etc...  In the end, I want to spend my file in the sequence selected in there.  Ideas?

  

  Hi Jigg

  RunState.InitialSelection.SelectedFile.Path did the trick

  

  Concerning

  Jürgen

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• In bulk to rename files in a folder by using the DOS command line or a batch file.

  Can someone help with this problem, please?  I remember seeing the DOS command line to do a mass renaming of files in a folder or a batch file. for example, vacation photos are all in the format DSC00001.jpg to DSC001234 and I want to change it to something like, say, Rome0001.jpg to Rome1234.jpg.

  How about this:
  Go to the folder of your files in that.  Create a text file, and open it (Windows should use Notepad, that very well).
  in the file type:
  Ren dsc*.jpg rome*.jpg
  Now, save the file as:
  renamethem.bat
  (Make sure you call it ".bat" and save it as a txt document, which will make a simpel file and not add a strange formatting)
  From there, just double-click this file and it renames all your pictures accordingly.
  :)

  Old timer

• The file of the bar - descriptor.xml (and make the application of command line)

  I made a game with air and it is online for sale on Android and iOS. It is somewhat popular and I thought to put up on Blackberry for quite awhile now and with the Port of soon-to-start-A-Thon, this seems to be a great time to finally make it.

  BlackBerry is not very common that here where I live in Sweden, however it still looks like an interesting with a potential platform if I want to get the trip. Unfortunately I don't own a camera myself so I'll use the Simulator. With some graphic problems with the simulator when running in mode BB10DevAlpha (icons does not appear right) and the Simulator is very slow when running in mode BB10DevAlphaSafe (chart appears on the right, but it seems that updating them requires more CPU my computer are available).

  The game is built using nothing other than Adobe Flash Professional CS6 and a bunch of command line tools to build the package and sign. I've only got an old computer with Windows XP now since the death of my main PC, all at the time and since the Port-A-Thon is just a few days I do with what I got.

  Firstly I understand that only AIR 3.1 is supported by Blackberry 10, so I use the old AIR SDK 3.1 to create a SWF (flash) file.

  What I really need to do should be used in the exported SWF file of the game, then use the command line tools provided by RIM to build the package, right?

  Except that I did not count on bar - descriptor.xml to be so difficult to understand.

  I was brought to the documentation here: https://developer.blackberry.com/air/documentation/bb10/bar-descriptor_config_file.html

  It says Adobe AIR at the top, the platform selected is Blackberry 10 and the title says "bar-descriptor configuration file", so it must be in the right place!

  I start by trying the 'bar-descriptor configuration example file"on this page:

  ===========================================================

  
  
    
        None
        fake
    
   
    
     Name of the author
   
    
     gXXXxXXx ##XxXxXxxxXxXX #xxx
   
    
     Core.Games
   
    
     Icon.PNG
   
    
     HelloWorld - splash.png
   
    
     read_geolocation
     use_camera
   
    
     1
  

  ===========================================================

  Of course during the test I replaced a few things in the example above with the correct filenames for images etc, I just copied the example of right - off this time to you guys show what I mean.

  Firstly, I extract "blackberry-tablets-sdk - 3.0.0" in a folder on the disc, then I make sure as a full path to the "bin" in the SDK folder inside the path on the OS environment variable.

  Then I read on "Applications of Test using the command line": https://developer.blackberry.com/air/documentation/bb10/testing_your_application_cmd_ms_2010851_11.h...

  Now I run:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf myappnameicon86.png bg splashscreen1024.png - device 192.168.8.128

  Note that "bg" is a folder with 500 images that must be accessible from the app. I hope that I can just add the folder like this and not type a path to each image file...

  What I get (in lib\adt.jar via the bat file):

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Okay, so the example did not straight on the box.

  Now, I've read all paragraphs in the first URL I linked above ("the bar-descriptor configuration file"). I start my own XML file and make sure to include everything that is marked as "necessary". That's what I'm left with:

  ===========================================================

  
  
      MyCompany
      
          
          com.mydomain.myappname
          My App name
          3.0.0
          
              splashscreen1024.PNG
          
          1.5.0
      
      run_native
      
          application
          
              bb.action.VIEW
              application/octet-stream
          
      
  

  ===========================================================

  I have no idea of what concerns the block whole call target, but it took, so he must be there.

  Now I launch (notice that myappnameicon86.png is gone since no icon is mentioned in the above XML code, it is not mandatory):

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf bg splashscreen1024.png - device 192.168.8.128

  Yet once, I get:

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Frustrated I get autour on the forums for answers, because the official documentation is nowhere getting me.

  I'm left with this:

  ===========================================================

  
  http://ns.Adobe.com/air/application/3.1">
      com.mydomain.myappname
      1.5.0
      
      My App name
      
      My App name
      
      
          myappname.swf
          standard
          fake
          true
          true
          landscape
          GPU
          fake
      
      
          myappnameicon36.PNG
          myappnameicon48.PNG
          myappnameicon72.PNG
      
      fake
      fake
      
          qnx.fuse.ui.skins.QNXDevice
          qnx.fuse.ui.skins.QNXNetwork
          qnx.fuse.ui.skins.QNXSensors
          qnx.fuse.ui.skins.QNXSkins
      
  

  ===========================================================

  Looks like the XML code that I use when I build for Android.

  First of all it doesn't have the tag root of qnx, but also nothing of the icons are of the required size (86 x 86). The tag required splashscreens and invoke target is also absent, to name a few. No idea of what the entire block of 'extensions' really do.

  Surely, this does not work:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf QNXDevice.ane QNXNetwork.ane QNXSensors.ane QNXSkins.ane myappnameicon36.png myappnameicon48.png myappnameicon72.png bg-device 192.168.8.128

  Success in building the package BAR to my infinite surprise!

  He even managed to install on the Simulator. An icon for the game. However when it auto-couru the app went into landscape, thought for a second and then crashed (or you leave?) without a message.

  Perhaps because the required qnx tag was missing in the XML?
  Perhaps because images in the bg file could not be loaded?
  Perhaps because he had no permission to keep screen from dimming?

  I have no idea. I tried to add XML to qnx at the address previous to the bar - descriptor.xml, I thought that maybe he needed both the qnx block for when you run the application and the application block for when packaging. But now, he has complained of something like XML is not not clean ("' fatal error: markup in the document following the root element must be well-formed." ").

  So he came to it, I have to ask for help if I ever make the deadline of the Port-A-Thon.

  (1) how am I supposed to write the bar - descriptor.xml?
  (2) what command line starting by "blackberry - airpackager.bat" is OK to use?
  (3) all I have to do is build the SWF using Adobe Flash Professional CS6 and then pack it using the Blackberry SDK, right?

  First of all, there are two xml files that you need.

  One is called the manifesto, is to AIR and is called yourappname- app.xml. It is identical to the ones you use for Android and IOS, though some elements will be ignored. It's one you need to switch on the command line, and is probably causing the 'Namespace' missing error message. A file manifest a minimum is:

  
  http://ns.adobe.com/air/application/3.1">
  
      com.example.appname
      My Fabulous Game
      1.0.0
  
      FileNameOfYourSwfWithoutExtension
      YourCompanyName
      
          [This value will be overwritten by Flash Builder in the output app.xml]
          true
          false
          none
          cpu
          false
      
  
  

  Replace the text in red with your own stuff.

  The second xml file is called to the bar of descriptor. It is for App World and the installation process and is called bar - descriptor.xml. It contains information about signing code, icon, permissions etc. A simple bar - descriptor.xml is:

  
  
     
        none
        true
        landscape
        false
        cpu
     
  
     
     your-name-on-certificate
     your-id-on-certificate
  
     core.games
  
     
     1
  
     
     
        icon86x86.png
     
     splash-landscape.png
  
     
     2.1.0.1314
  
     
     access_shared
     access_internet
     play_audio
     set_audio_volume
  
  

  Make sure that you at least change the red dots.

• Win 7 64 bit is the command line 32-bit or 64-bit?

  Win 7 64 bit is the command line 32-bit or 64-bit?

  Win 7 64 bit is the command line 32-bit or 64-bit?

  Hello

  There is a 32-bit and 64-bit version of the shell (cmd.exe) and is the same for some of the other main components of the system, such as the Publisher of the registry (regedit.exe).

  That the one you use depends on how you start the shell. If you start the shell in one of the normal ways, for example by typing cmd.exe in the Run dialog box type cmd.exe in the start/search box, etc, then you would use the 64-bit version.

  To start the 32-bit version of the shell, you must specify the path. For example from the Run dialog box, type C:\Windows\sysWOW64\cmd.exe or the same path in the start/search box.

  If you often use the shell, it's a good idea to customize the 32-bit version which makes it easier to see that it is running. I changed the background color of the 32-bit version of a medium blue. In this way there is no doubt which I use.

  It is also important to note that each command you use either version are tackling the same version of system files that are involved with this command. For example if you type regedit.exe in each version, you will get the same version of bits of the registry editor.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• I need help with a question command line syntax

  I got 3 issues that need to be entered in command line / syntax.
  I had no training in command line and need help for that setting in the command line syntax.
  (The IP address is a fact).
  This will be done also on a PC that requires elevated permissions. So if a programmer can zip through it in no time it would be much appreciated. Perhaps one without high and an example with.

  1 setting up daily ping test to a server with the IP 10.254.254.1 which will be composed of 1 000 ICMP echoes.
  2. establish daily ping tests to a server with the same IP address which will consist of one hundred 1 500 bytes ICMP packets.
  3 configure these run every day and are output to a text file.

  Hi Matt,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• Is there a way to launch Windows 8 speech recognition from the command line?

  Is there a way to start (and stop) Windows 8 speech recognition from a command line prompt? I found a post giving the command to start speech recognition in Windows 7 as "c:\windows\speech\common\sapisvr.exe - SpeechUX". Although it seems to start the process of sapisvr.exe, MISTLETOE (the microphone with closing, minimize and text box) does not appear.

  Offered the same post "taskkill /im sapisvr.exe /f" to stop the service, but it throw an error of permissions in Windows 8. In any case, I'm more desperate to a corect command-line START the voice recognition system.

  Any help would be appreciated

  Yes, there is a way!
  Try to use the link in the ease of access.

  Launch this way C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Accessibility\Speech Recognition.lnk and everything will work!