Comment causes failure of signature validation

Similar Questions

• Certificate chain from... wasn't confidence causing failure of SSL handshake.

  When using a remote WLST script and execution of order...

  nmConnect ("" weblogic', 'weblogic', ' 192.168.2.101 ', ' 5556', ' mydomain "")

  I get the following error...

  < security > < BEA-090542 > < string from... certificate wasn't confidence causing failure of SSL handshake. Check the certificate chain to determine whether to trust or not. If it must be reliable, then update the customer made trust CA configuration to approve the certification authority that signed the peer certificate chain. If you connect to a server of WLS is using demo certificates (Server default WLS behavior), and you want this client to approve certificates demo, then specify - Dweblogic.security.TrustKeyStore = DemoTrust on the command line for this customer. >

  I did what suggests the added - Dweblogic.security.TrustKeyStore = DemoTrust error and the wlserver_10.3/server/lib/DemoTrust.jks to my classpath, but it do not solve the problem.

  Is there a configuration on the server itself I have to do?  Or additional configuration for the customer?

  Thanks in advance.

  I found the problem.  For some reason any example I used whole-Dweblogic.home.  This withdrawal has solved the problem.

• pulling my hair out for a signature valid pdf

  Using Acrobat 9 Pro with a new server certificate to a different certification authority that I tried to put a signature invalid in a pdf file. For some reason any acrobat gives me the "Signature is invalid" message with a red cross. When I open the Details dialog box of the certificate I see a "!" down with the message "the path of the certificate selected contains errors: invalid policy constraint. I'm not really sure what it means? the constraints are not valid? Then I read acrobat can do a log during the validation process, so I was wondering if it would help, I had something like that (I've edited a few pieces to protect my client):

  20110913195706Z:

  20110913195706Z: validation chart cert with 1 channels

  20110913195706Z: validation of string: CertChain_ [edit] length = 5

  20110913195706Z: - ChainBuilder -

  20110913195706Z: certificate of treatment: DN: cn = [edit] CA - G2, o = [change], c = NL Series: [change]

  20110913195706Z: audit time = 20110913131236 + 0200

  20110913195706Z: certificate of treatment: DN: cn = [change] - G2, o = [change], c = NL Series: [change]

  20110913195706Z: audit time = 20110913131236 + 0200

  20110913195706Z: certificate of treatment: DN: cn = [change] - G2, o = [change], c = NL Series: [change]

  20110913195706Z: audit time = 20110913131236 + 0200

  20110913195706Z: certificate of treatment: DN: cn = [change] - G2, o = [change], c = NL Series: [change]

  20110913195706Z: audit time = 20110913131236 + 0200

  20110913195706Z: certificate of treatment: DN: cn = [change], OU = [change], o = [change], l = [change], st = [change], c = NL Series: [change]

  20110913195706Z: audit time = 20110913131236 + 0200

  20110913195706Z: added string flags badly 0x200 generator

  20110913195706Z: end of string Validation.  TroubleFlags: 200

  20110913195706Z:

  I am particularly interested if someone knows what that this line "added string flags badly 0x200 generator" means?

  Any help is greatly appreciated!

  Hi lullolullo,

  You came to the right place. Signature validation begins with trust. If you do not trust the signer, or one of the certificates in the chain of signature, then nothing happens. A signature string looks like this:

  Big Time CA root Cert

  Intermediate CA

  End entity (the signatory, or in this case, you)

  You must assign trust at least one of the certificates in the signature string. You can either add trust via the dialog manage identities approved or by a preference where you can inherit trust from the Windows certificate store (Windows only, not Mac). To see the string in the signature you want to do the following:

  • Right mouseclick on the signature
  • Select Show Signature properties in the pop-up menu
  • Click view certificate in the Signature Properties dialog box
  • The string is displayed in the tree view on the left side of the dialog box

  If you select the trust tab, and then different certificates in the output string, you will be able to see what is the anchor of trust.

  Enough confidence, to Restrictions of strategy. When a certification authority (CA) issues certificates, they will often add the certificate policy extension. You can find this by selecting the Details tab, and then scroll the list box for the certificate policies. Politics is a long number in dotted line that acts as a marker for a specific set of rules. The rules themselves tend to be published online in a "Certificate Practice Statement" document, but becomes a bit beyond the scope of your problem. The rule can mean something as all certificates under this political constraint problems are communicated to the employees of the company XYZ and must be a hardware token. This is an example of something you might see but I do not say it the exact scenario that appeal to you.

  The root CA generally do not have an extension of certificate policy, but all the certificates under it make sense that this string obeys a set of specific rules.

  On the application of the rules. Let's say you have this Big Time, which issues certificates for IBM, Microsoft, Apple and Adobe. Each of these strings contain a different certification policy. Now, let's say that I trust it Big Time, which means that each signature that created this channel until Big Time would be reliable and valid. Now let's say I want to only trust the signatures coming from my fellow Adobe employees. What I would do, is add a policy of Restriction to the trust setting, which makes the more granular trust.

  Towards the top, where is Restriction policy. The strategies on the display of the certificate tab. When you view the certificate itself that is designated as the anchor of trust do you see something in the area of Group Policy Restrictions? I mean something data in the certificate policies field edition which seems to be gray. If Yes, then the signatory certificate and other certificates in the chain must have the numbered in certificate policy Extension.

  If the restriction is there, you can remove it by going in the dialog Manage approved identities , you can get from the menu Advanced . From there, you will need to select certificates from the drop-down list display. Find the certificate that corresponds to the anchor of the trust, selected in the drop-down list, and then click Edit Trust . Finally, select the policy Restrictions on the dialog box change the Certificate Trust. However, I'm not, and advise you to break any policy of the company if they want the restriction in place.

  Steve

• JSF keeps displaying the old values after the failure of the Validation Phase

  Hi all
  I would like to ask for help to understand a given behavior that JSF indicates that the Phase of Validation fails.
  I use:
  
  -Tomcat 7.0.2
  -JSF 1.2_12
  -RichFaces 3.3.3
  
  Description of the problem.
  I wrote a form with input fields 4: an inputText and selectOneMenu 3. There the inputText while the selectOneMenus require no validation.
  Attached to the first selectOneMenu (line 32) is an a4j tag: support, so that, whenever the change event is triggered, the list of items of the second
  and the third (line 44 and 58) selectOneMenu are filled correctly (note that the agent of the inputText is ignored with the ajaxSingle attribute).
  In particular, after the loading of two lists of items, the actionListener requires the value of the second and the third selectOneMenu null.
  This mechanism seems to work fine until I submit the entire form without completing the text entry: as expected, JSF validation fails but if I change the value of
  the first selectOneMenu again (causing a new submission), page guard showing the specified values before JSF validation failed for the second and third
  selectOneMenu (note that the actionListener is still called and the values of the second and the third selectOneMenu are always forced to null).
  
  Since I'm on a simple PhaseListener, I noticed the following: before JSF validation fails, whenever I change the value of the first selectOneMenu, life JSF
  cycle always calls the get method for the second and the third selectOneMenu during the Render response Phase. In this way, JSF is able to 'see' that
  These values have been set to null in the appeal Phase.
  After the validation failure, JSF stop to call these getters when I change the value of the first selectOneMenu.
  
  I hope that my explanation was clear enough, thank you very much for your help.
  
  Kind regards
  Nico
  
  Web page

  <?xml version='1.0' encoding='UTF-8' ?> 
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" 
                        "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml"
        xmlns:f="http://java.sun.com/jsf/core"
        xmlns:h="http://java.sun.com/jsf/html"
        xmlns:a4j="http://richfaces.org/a4j"
        xmlns:rich="http://richfaces.org/rich">
  
  <head>
    <title>Prove Rich</title>
  </head>
  
  <body>
  
    <h2>Prove Rich</h2>
    
    <f:view>
    
    <a4j:outputPanel ajaxRendered="true">
      <h:messages style="color:red" />
    </a4j:outputPanel>
    
    <h:form>
    
    <p>
       Input required: <h:inputText value="#{provaProbReplyBean.inputRequired}" required="true" />
    </p>
    
    <p>
         <h:outputText value="Scegli il canale:" />
         <h:selectOneMenu value="#{provaProbReplyBean.canale}">
       
          <f:selectItem itemLabel="--" itemValue="" />
          <f:selectItem itemLabel="Profamily" itemValue="Profamily" />
          <f:selectItem itemLabel="Captive" itemValue="Captive" />
          
          <a4j:support event="onchange" action="#{provaProbReplyBean.caricaProcBanche}"
                                ajaxSingle="true" reRender="procedure, banche" />
       </h:selectOneMenu>
    </p>
    
    <p>
         <h:outputText value="Scegli la procedura:" />
         <h:selectOneMenu id="procedure" value="#{provaProbReplyBean.procedura}">
       
          <f:selectItem itemLabel="--" itemValue="" />
       
          <f:selectItems value="#{provaProbReplyBean.procedureList}" />
          
          <!-- immediately save the current value -->
          <a4j:support event="onchange" ajaxSingle="true" />
          
       </h:selectOneMenu>
    </p>
    
    <p>
         <h:outputText value="Scegli la banca:" />
         <h:selectOneMenu id="banche" value="#{provaProbReplyBean.banca}">
       
          <f:selectItem itemLabel="--" itemValue="" />
       
          <f:selectItems value="#{provaProbReplyBean.bancheList}" />
          
          <!-- immediately save the current value -->
          <a4j:support event="onchange" ajaxSingle="true" />
          
       </h:selectOneMenu>
    </p>
    
    <p><h:commandButton value="Submit" /></p>
    
    </h:form>
    
    </f:view>
    
  </body>
  
  </html>

  Bean

  public class ProvaProbReply {
  
       private String inputRequired;
  
       private String canale;
       private String procedura;
       private String banca;
       
       private Map<String, List<SelectItem>> canaliProc = new HashMap<String, List<SelectItem>>();
       private Map<String, List<SelectItem>> canaliBanche = new HashMap<String, List<SelectItem>>();
       
       private List<SelectItem> procedureList = new ArrayList<SelectItem>();
       private List<SelectItem> bancheList = new ArrayList<SelectItem>();
       
       public ProvaProbReply() {
       
            List<SelectItem> l = new ArrayList<SelectItem>();
            l.add(new SelectItem("Cessione del quinto"));
            l.add(new SelectItem("Credito al consumo"));
            l.add(new SelectItem("Mutui"));
       
            canaliProc.put("Profamily", l);
            
            l = new ArrayList<SelectItem>();
            l.add(new SelectItem("Credito al consumo"));
            
            canaliProc.put("Captive", l);
            
            l = new ArrayList<SelectItem>();
            
            canaliBanche.put("Profamily", l);
            
            l = new ArrayList<SelectItem>();
            l.add(new SelectItem("BDL"));
            l.add(new SelectItem("BM"));
            l.add(new SelectItem("BPM"));
            l.add(new SelectItem("CRA"));
            
            canaliBanche.put("Captive", l);
       }
       
       public String getInputRequired() {
       
            return inputRequired;
       }
       
       public void setInputRequired(String ir) {
       
            inputRequired = ir;
       }
       
       public String getCanale() {
       
            return canale;
       }
       
       public void setCanale(String c) {
       
            canale = c;
       }
       
       public String getProcedura() {
       
            System.out.println("\ngetProcedura called\n");
            return procedura;
       }
       
       public void setProcedura(String p) {
       
            procedura = p;
       }
       
       public String getBanca() {
       
            System.out.println("\ngetBanca called\n");
            return banca;
       }
       
       public void setBanca(String b) {
       
            banca = b;
       }
       
       public List<SelectItem> getProcedureList() {
       
            return procedureList;
       }
       
       public List<SelectItem> getBancheList() {
       
            return bancheList;
       }
       
       public String caricaProcBanche() {
       
            System.out.println("\nListener called\n");
       
            procedureList.clear();
            bancheList.clear();
            
            if(canale != null && !canale.equals("")) {
            
                 procedureList.addAll(canaliProc.get(canale));
                 bancheList.addAll(canaliBanche.get(canale));
            }
       
            System.out.println("BEFORE setting:\n");
       
            System.out.println("\nProcedura: "+procedura+"\n");
            System.out.println("Banca: "+banca+"\n");
       
            procedura = null;
            banca = null;
       
            System.out.println("\n\n\nAFTER setting:\n");
       
            System.out.println("\nProcedura: "+procedura+"\n");
            System.out.println("Banca: "+banca+"\n");
       
            return "";
       }
  }

  Published by: 869000 on 14.05 giu-28-2011

  I think it has to do with the fact that the UIComponents use the localValue after the validation failure. This prevents values are overwritten when the re-rendering of the page, i.e. the entries keep the value defined by the user.

  The solution is to manipulate the components directly in the AJAX request, when the first drop down menu is changed. Use the binding attribute to place them in your beans and clear the value directly. In this way, that it won't matter that the expression is not evaluated.

• Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

  I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

  Measures taken (without the fix):

  -Reboot

  -Restart in Boot Clean with Services MS no disabled state

  -Updated Troubleshotter

  -System Restore (3 weeks)

  -DISM.exe / Online/Cleanup-image /Restorehealth

  I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

  Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

  Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

  Windows 8 Pro 64 bit w / Media Center

  Norton Security Suite

  THAT IS TO SAY 10.0.9200.17148

  Worm update: 10.0.22

  Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

  Otherwise, my computer works without other unusual problems.

  Hi Brad,

  Thank you for your response.

  For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

  For more information, you can check the link below.

  Update to Windows 8.1 of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Adding an html comment causes an entire table to disappear in CC Design view

  Do some settings on a page in the html editor in DW CC and by adding a simple comment <! - BEGIN HAND TABLE - > causes vast below table to disappear in the design view.  But the html code is still there in the html editor and the page is displayed correctly in a browser. Refresh Design view does nothing. At first, I kept Undo'ing it back to where I was before adding the comment. Then I thought that maybe if I saved the doc after the comment it refresh properly, but it didn't. Do not help quit and restart DW.

  What gives? The Design Bulletin Board is now gone.  I can't work like this, without seeing the page I'm working on that...

  I can do this same thing happen over and over - which seems to indicate a bug in DW CC...

  I know that you are pro anti-tables, but I'm stuck with tables right now...

  It turns out that the changes were fairly simple, there was just a bunch of them (missingandtags for most). Try this code instead of your-

  http://www.murraytestsite.com/forum1b.html

• Updating of the master/detail does not work after the failure of the validation

  After validation of the judgment of the further processing of a page page page master detail, I get the error message Oracle depending on the display of the detail portion:

  < code >

  ORA: 01445: cannot select ROWID, or sample, a view of join without key preserved table.

  ORA-06510-PL/SQL unhandled exception defined by the user.

  < code >

  
  

  Clues as to why this might happen?  The master of the page displays fine as well as the validation error message personalized appropriate. It's just part of detail (from SQL-based report) that is causing the problem.  I use either a ROWID.

  
  

  Thank you!
  

  Just an info for all those who may have this same problem in the future.  I corrected the error and it had nothing to do with the ROWID or views or something like that.  Under the section of Page rendering when you set the definition of the region in the source section, I included the "order by" clause in my SQL statement.  This was the cause of my ORA-01445 error!  When I removed the clause of the definition of the source, and instead included in the attributes report by checking the box of the appropriate column sorting (which allows the apex generate so for me), the error has disappeared!  The error message Oracle NEVER would have given me a clue to what caused the error.  I joined just thinking 'what if I take the order by clause.  What's a flukey fix!

• Impossible to obtain Verisign Signature validated in Acrobat

  For the last six months, I was able to get my digital signature Verisign validated in Adobe Acrobat format. Just today, I renewed my Verisign certificate for another year. I saved the certificate on my hard drive using a password to fix it. When I certify a my signature on a document, the resulting signature icon says "...". invalid persona"and the icon in the upper left corner (the head and shoulders of a person) has an exclamation mark on it.

  I am frustrated trying to figure out what is wrong. Any suggestions would be greatly appreciated.

  Hi Mike,.

  Acrobat (and when I say Acrobat Acrobat and Reader time) it is sufficient to establish a valid string. If you have selected one of the root certificates as the anchor of trust and that the signature is valid, then you're done. One thing I suggest you do is to ensure that all certificates below the anchor of trust have the revocation information. In the view of the certificate dialog box, you can select the revocation tab. As you highlight (select) each cert below the anchor trust you should see information in the Details window on the revocation information. If the text says that it is missing or there are problems let me know, otherwise you are good to go.

  Either way, you might be able to uncheck display all found certification paths (above the window where you see three identical channels) and then you will see only the a string that uses Acrobat. That could help to simplify things.

  Finally, it would be great if you could mark the thread as answered (that is, only if you feel the question was answered) to help other people looking for the forum close to the bottom of what you have to look.

  Thank you

  Steve

• Laser Jet MFP M127fw Pro: Windows 10 Upgrade causing failure print

  Installed Windows 10 free update of Windows 8 - everything is going well until an automatic upgrade on August 13, 2015.

  Since the 8/13 patch (?), the Laser Jet Pro MFP M127fw spool print jobs, but do not go to the printer.

  Removed and reinstalled HP provided the CD with the same results.

  Test print at the end of installation OK.

  When you try to print from Outlook 2003, Windows 10 returned two error messages

  It said printer error state.

  Other says something about outbind failure.

  Same feeling of failure for Adobe 11.0.12.

  Word and Excel also

  Name of the default printer in Windows print Manger is:

  HP LaserJet MFP M127-M128 PCLmS Pro.

  HP "AUTOFIND PRODCUTS" set ID's of this printer as:

  MFP HP LaserJet Pro M1136

  Resolved failure printing using HP diagnosctic tool 'HP and Scan Doctor 4.7 printing'.

  Installed an AVAILABLE to update the printer driver.

  Not until the 'WITHDRAWAL of POWER' to restart.

  Everything looks OK now.

• Failure of the Validation of WSDL (Web Services)

  I want to create a Service-Based Web Application in LabVIEW and I'm trying to go through the steps in the tutorial http://zone.ni.com/devzone/cda/tut/p/id/4728.

  I tried the following web services, but I still get the same error.

  http://coeservice.en.KKU.AC.th:8080/TemperatureConvertor/TemperatureConvertorService? WSDL

  http://www.ecubicle.NET/iptocountry.asmx?WSDL

  Error:

  The WSDL Validation failed.

  Validation failed. The URL is not formatted correctly and must be in the following form: http://localhost/test/good.asmx?WSDL

  I set a proxy with authentication. Without that, I have another error:

  Validation failed.

  The possible reasons are:

  1. the URL does not exist or the WSDL file is bad.

  2. authentication is not correct.

  3 proxy information is not correct.

  So, it seems that the proxy information is ok. But the web service I want to access is not located on the localhost - I want to access a Web service. Can someone give me a hint? I tried to change some parameters of the LabVIEW Web server. But it did not help anything.

  David

  Hi David,

  I tried second link you gave and worked perfectly (without authentication). One gives me the error that you mentioned.

  Are you sure that this URL exists?

  Andrea Perin

  Application engineer

  OR Germany

• Clear the Cache of the element after the failure of the validation

  Hi guys,.
  
  I have a validation of the page that is triggered when two elements (P6_LOCATOR_ID & P6_NEW_LOCATION) is equal that works OK.
  
  Validation in the field is the field of P6_NEW_LOCATION.
  
  During this validation is true, I want the validation message is displayed as it is now, but I want the P6_NEW_LOCATION be given to null or cleared the cache for this element.
  
  I can't run it as a page after calculations and validations process because he never gets past the validations to open. I also tried to create a process of point clear cache after you press the button that triggers the validation, but still, it does not.
  
  Can anyone think otherwise it's possible?
  
  Thank you
  Chris

  Hi Chris,

  You pass the question as bind variable rather than spend his name in your validation page.

  your code

      APEX_UTIL.SET_SESSION_STATE(:P6_NEW_LOCATION,NULL);
  

  correct code

      APEX_UTIL.SET_SESSION_STATE('P6_NEW_LOCATION',NULL);
  

  Thank you

• Solicit comments on get some instructions validation added on top of the forum list...

  (complain... ( second third time trying to post this... stupid forums flat on me...)

  G ' Day

  I just posted a thread (http://forums.adobe.com/message/2679771) on the 'Comments' forum for this purpose:

  Is it possible that we can get a sticky added to all instances of ColdFusion, suggesting that the following resources are a good starting point before posting questions:

  • CF8 docs online: http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=Part_3_CFML_Re f_1.html
  • CF9 docs online: http://help.Adobe.com/en_US/ColdFusion/9.0/CFMLRef/index.html
  • Search the forums before posting for people who have had the same problem before
    
  • Google search before you post for the people who had the same problem before
  • Read this: http://CatB.org/~ESR/FAQs/smart-questions.html

  I spend some of my time, answering the questions of the people he spare (and I am of course happy to do), but really a lot of questions are naïve enough, and the user could help themselves by taking the steps above before asking.

  Even the newest of newbies who cannot be expected to know much at all (which is great!) can help themselves by having a liquidator first.  And I always tell me that it's better for people to try DIY, rather than come up with a spoon, wanting to be fed.

  ?

  Jochem suggested that I seek the participation of interested parties here, until we run with anything.

  So, if you have an opinion... pls weigh (on the other thread, not this one).

  See you soon.

  --

  Adam

  (we'll see if the cursed thing post this time...)

  To ensure that everyone who wants to offer its contribution made so in the other thread, I'm locking this one.

• ERROR CODE 606 CAUSING FAILURE OF THE UPDATES OF WINDOWS 'IMPORTANT' 10

  Help, please!  I try to install the last "10 important updates" for Windows, which I was informed automatically.  I tried 4 times in 2 days now and each of them settled due to the 'error Code 606'.  When I click on "help", he pulls up "WindowsUpdate_00000646" "WindowsUpdate_dt000" If that's any help.  Each time, it goes through all the motions, past by restarting as usual, then I get the same reminder of updates, showing "failed" on all of them.  I have not had this problem before.  I don't know what to do to get these updates installed.  I NEED HELP ASAP!  I am a user of impressive program but not at all a geek who can solve the problems that arise, and I have no one to turn to in my personal circle.

  First of all try to install updates when you're disconnected from the internet.

  If no joy, then try to manually download the same and install.
  You can search the individual updates here:
  http://www.Microsoft.com/downloads/en/default.aspx

  He just put in the KB number and then perform a search.

  If this still creates one problem another thing you can try is disable the User Account Control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  How to use User Account Control (UAC) in Windows Vista
  http://support.Microsoft.com/kb/922708

  TaurArian [MVP] 2005-2010 - Update Services

• Failure of signature blackBerry RRT fot key Code registration

  Hello

  I got all three keys to RIM, and I have registar key ' client - RBB-* .csi "and" customer - CPR-* .csi "but when I try to sign the" customer - RRT-* .csi ' key I get this error:
  "Registration failed because ID customer * is not configured to be registered (i.e. the ID was not in the database of the authorization).

  Did someone knows how to solve this problem, or I'm doing something wrong here?

  Best regards
  Daniel Botelho

  Yes, it is now fixed! They gave me a new set of keys.

• Windows 7 is not reconizing signatures valid baptistery

  Updated my laptop NEC Versa E3100, since XP, with a disc bigger hard and 3gig memory. Installed Windows 7. Every thing went fine, except that now, I have no sound. The "speaker" icon has a red circle with a white cross in the Center. The message popping up, it's that there is no audio device present. I loaded the file from Realtek and tried to install, but Windows does not allow to do so. The software has a certificate, but it is not being recognized by W.

  Thanks Douglas

  See if this helps: http://www.ehow.com/how_6801598_remove-windows-security-alert-certificate.html

  J W Stuart: http://www.pagestart.com