Similar Questions

• Can I change the location of the vmx config file?

  Hello

  I have Esx 3i 3.5 running in the cluster, and installing vCenter 2.5 Update5 as virtual machine within this cluster of ESXi. I put the configuration file vmx to this virtual machine on the wrong number of unit logic (data store). How can I change the location of the vmx configuration file to another location?

  All boards have a lot appreciate.

  Thank you

  First remove you the inventory (Yes, it's unsubscribe in my mind), and after copying you use add to inventory.

  StarWind Software R & D

• Comment by instructions in the PIX config file?

  Hello

  Is there a way of declarations of entry comment in a PIX config file? If so, how?

  TIA

  Prefix the line with a: (colon).

  for example. The first line of the following is a comment and is ignored

  : Allow access to the Web server

  acl_outside list access permit tcp any host 1.1.1.1 eq www

  Note: Comment lines are deleted when the configuration file is entered in the PIX.

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Try the managed version without modifying the machine.config file

  Hello
  
  I'm testing the managed version of the driver, and I have the following question:
  
  Is it possible to use it without modifying the machine.config file?
  
  I tried to add the following line to my web.config within the < configSections > tag file:
  
  "< name =" article oracle.manageddataaccess.client"type =" Oracle.ManagedDataAccess.Client.OracleClientFactory, Oracle.ManagedDataAccess, Version = 4.112.3.50, Culture = neutral, PublicKeyToken = 89b483f429c47342 "/ >
  
  and what follows within the tag < system.data > < DbProviderFactories >:
  
  < = invariant 'ODP.NET, Managed Driver' name = "Oracle.ManagedDataAccess.Client" description = "Oracle Data Provider for. NET, the driver managed" type = "Oracle.ManagedDataAccess.Client.OracleClientFactory, Oracle.ManagedDataAccess, Version = 4.112.3.50, Culture = neutral, PublicKeyToken = 89b483f429c47342" / > "
  
  but then I get an error saying:
  
  Type 'Oracle.ManagedDataAccess.Client.OracleClientFactory' does not inherit from 'System.Configuration.IConfigurationSectionHandler.
  
  Greetings.

  In the tag, try with:

  J..

• How to add comments in the .vmx file?

  The subject says it all.

  How do I comment in a .vmx file?

  Thnaks in advance.

  Start the comment line by "#".

• new data in the standy config file

  My standby_file_management is set to auto. But when I added a new data file, it has not added on the standby server.
  
  my version of db is 10.2.0
  on linux

  standy_file_management only works if a new data file is added...
  If the value automatically the data file gets created automatically in standby mode; but in the case of copy it from another source, it must copy on the standby server as well... Besides, you also have to re-create the standby control file.

• PrimeClient cloning to configure Client1-6 to take care of several mosaics, Question on the vmmark2.config file

  I intend to run several mosaics.  For my setup, Client0 is customer first, and then I have:

  -Client1

  -Client2

  -.. .route customer 7

  What should I do with the files vmmark2.config for the rest of the guests?

  -Should they be configured separately in the context of the tile that the customer belongs to?

  - Or do I just worry on the preferred client configuration file and leave the rest to default values?

  Only for the first file used get VMMARK2.config customer.

• Having problem to add code to the .vmx file.

  I try to add the code below in my .vmx file.

  mainMem.useNamedFile = "FALSE".
  MemTrimRate = 0
  prefvmx.minVmMemPct = "100".
  prefvmx.useRecommendedLockedMemSize = 'TRUE '.
  sched.mem.pshare.Enable = "FALSE".
  I added my vmx file attachments, so you can take a look.
  I added these lines of code to the wrong file?

  After that, I am unable to open the virtual machine and get an error message:

  http://i50.Tinypic.com/33mwub9.PNG

  IM using Windows 7 pro on the host computer. With the help of VMware Workstation 8

  Help please! =)

  The file you connected, Windows 7 vmxf, isn't the .vmx config file and does not have the file, you should be editing!   Remove your Windows 7 vmxf file changes and edit the .vmx instead.  If you still have questions after that cleaning of the .vmxf file and modifying the .vmx file and then archive them both in a zip file and attach to a response message.

• Comments of the workstation is unable to restart or resume

  Hello

  I have a Windows XP Client, which is in a suspended state

  1. in trying to catch: display shows briefly the 'VMware logo' as if he tries to resume. But will return to the screen with the suspended guest

  The newspaper of wmware:

  13:37:43.000 + 02:00 | VMX | I120: Msg_Question: -.

  VMX | I120: DICT - Workstation\settings.ini C:\ProgramData\VMware\VMware GLOBAL SETTINGS

  2013 07-28 T 13: 37:43.000 + 02:00 | VMX | I120: [msg.checkpoint.restore.error] a mistake due to the restore operation fails. Cancel the restore operation and to correct the error or ignore the State of the snapshot and power off.  Will not suffer the saved snapshot.

  2013 07-28 T 13: 37:43.000 + 02:00 | VMX | I120: ----------------------------------------

  2013 07-28 T 13: 37:43.000 + 02:00 | VMX | I120: MsgIsAnswered: using builtin default 'Cancel' as the answer to "msg.checkpoint.restore.error".

  2013 07-28 T 13: 37:43.000 + 02:00 | VMX | I120: MsgQuestion: msg.checkpoint.restore.error response = 0

  2013 07-28 T 13: 37:43.000 + 02:00 | VMX | I120: Power Module Checkpoint on failure.

  -excerpt from end

  Looking at the Workstation\settings.ini of C:\ProgramData\VMware\VMware: the file is empty!

  2. all the possibility of turning off power or Shutdown are grayed out

  Unfortunately, I recently took a snapshot, but I can't go back to this, Message Unable to open snapshot file

  Questions: I suspect the empty state of C:\ProgramData\VMware\VMware Workstation\settings.ini is the problem keys. But what content should be in this file?

  Any contribution is appreciated

  By default, the settings.ini file is of length zero and is probably not the cause of the problem.

  If the Virtual Machine will not pick up, then you must manually remove the suspended state.

  Navigate to the folder that contains the files that make up the computer virtual, then with VMware Workstation closed, or at least the l' onglet tab for the target of the Virtual Machine in VMware Workstation GUI closed, delete the following files: .vmss, .nvram and .lck files/folders.

  Then edit the .vmx config file shows the option checkpoint.vmState : checkpoint.vmState = ""

  Note: Removal of the waking state has the same effect as when you perform a hard reset of the virtual machine, or by pushing the reset button on a physical computer, in that all data in unsaved open applications is lost!  However if the Virtual Machine resume so I don't see any other choice to try to run the Virtual Machine.

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• My favicons are not showing for all of my favorites as well as some current bookmarks imported and when I opened the topic: config it says "browser.chrome.favicons; false." If this should not be true, and how to change?

  I had to rebuild my computer and when I imported all my favorites that they had no favicons. I started to receive some of the favicons when I go to the websight that he reconnect, but now I can't seem to see any of them. I did a Google search and a tech site suggested the subject: config file and that the 'browser.chrome.favicons; false' must be set to true. But when I switch to true and restart Firefox is once again set to false. I know, it doesn't seem much, but it's very annoying to not have the favicons.

  Help me Obi Wan Firefox you're my only hope.

  The browser.chrome.favicons preference must be set to true, as it is does not have the value when you restart Firefox, see the article How to fix preferences that will not save for possible causes.

• Config file error

  Hello

  I could play Bejeweld 2 on my laptop. This game is in the 'Games' folder in 'programs' under the Start button. But from today I'm not capable of playing Bejeweld 2 or any other game that is located in the folder "Game". All I get is an error message saying the following: Config File error cannot open file (line 0, column 0).

  I use Internet Explorer 8.0.7600.16385

  The only game that works is called Solitaire.

  I would like to help resolve this. I tried the Microsoft Fix It, but that is only an error and could not continue the analysis of the computer.

  Best regards

  Kelly Heijn

  Hi Kelly Heijn,.

  1. Only tried Microsoft fixit?
  2. When was the last time it was working fine?
  3. Did you the latest changes on the computer?

  Check if you can run games in SafeMode.

  Note: Screen would be inappropriate in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the above step failsthen, I would say that SFC scan running on the computer that would be a search for files corrupt on the computer system and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Jabber-config file update on CUCM 10.5.2

  I am looking to update my jabber file - config.xml and turn on numbering URI.  I know that I need to add this:

  true

  It has now than that:

  UDS true mail

  Couple questions.

  1. How can do a test this locally?  I tried a few different methods and they do not seem to work.  I read somewhere that the jabber config file is not stored locally, is this possible test on version 10?  All of the items that I was referencing are version 9.

  2. once I have it working locally, the best way to download and difficulty would be to connect via the operating system administrator and to download the new config.XML - jabber, overwriting the current one?

  3. to dial the URI, I'm just able to put an email address and hit call, right?  What to do now, and he will not be trying to make a call.

  I think I have everything on the configured backend, just need this piece of jabber fixed test.

  Thanks in advance.

  1 jabber - config.xml file is stored on the PC with the name cachedtftpconfigstore. It started of jabber version 10.6. I suppose now you want to test this locally on 1 machine and if it passes with success then you'll apply it globally. to test a local machine, download the new xml file of jabber-config on TFTP server with jabber-config name - use .xml. now mention this file name in the field of support for cisco on the device of CSF on CUCM configuration page. see this guide for syntax.

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/11_0/CJAB_BK_D...

  See the section "configuration of the group to create.

  2. Yes, you must log into the OS admin page and download the file config.xml - jabber so that it can be distributed on a global scale.

  3. Please consult the guide to successful composition URIs.

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/10_5/CJAB_BK_D...

• After the failure of snapshot on WS11 can no longer light station: inconsistency of Config file somewhere. How turn on now?

  Yes, I always use WS11, suites my thin QA purposes. Yesterday I realized that I had not taken snapshots of an important forum and has attempted to do. Well, I could have the computer always on when I clicked snapshot (OH!)  and she has not (although a snapshot file has been created). This is now, when I try to turn on the machine, I get a "file not found: M_Windows7_1.vmdk.» The correct name of this config file is VM_Windows7_1.vmdk, so somehow that the V is lost in a backup. I can't find any file to edit with the missing V. No idea how I'm going to bring this machine very important back working again? Is this something in the config of the snapshot file? I don't want to go delete stuff without knowing the consequences. Maybe it's as simple as put the snapshot files in a folder and see if it lights? Please let me know what other info you can have files of newspapers, etc.  I start to panic.

  Thanks in advance!

  So, there is no more recent log file in the folder of the virtual machine?

  It's really a weird question. Since you do not have a backup, please remove the virtual machine from the library of VMware Workstation (don't remove disk). Then create a new directory on drive G: (e.g. "VM_Windows 7_1" and move this directory VM_Windows 7_1.vmx and VM_Windows 7_1.vmdk .) After that, remove the *.lck files and move all other files related to the virtual machine to another (temporary) folder, so that the root of G: drive does not contain the files of the virtual machine again. After that, open the . VMX file from the file menu of the VMware Workstation and try to turn on. The only message you will receive is a question of if the virtual machine has been moved or copied, where "moved" is the answer in this case.

  André