Comments on which after the resumption of the snapshot

Similar Questions

• New VM broke out after the snapshot has been taken

  I just created a new Linux Debian 500 VM, I started and took a snapshot of the current state, until I installed VMware tools.  In the middle of the snapshot and once completed the virtual machine in gray and stop and wouldn't start up.  I also tried to get around by creating a new virtual machine and using its virtual disk already existing and not worked, made a mistake of locking file.   Attached are some of my log files.  Thank you for your help in advance.

  This disk must have a corresponding vmdk file that is needed.  Otherwise, this file will not be read by the virtual machine and can not be used.  I thought that was missing before, that's why I had you create a new drive of the same size, so you can reuse this other file descriptor to go with this - flat.vmdk file.  Who is?

  -KjB

  VMware vExpert

• Comments automatically suspend after the 4.1 update

  I am running VMware Fusion on a Mac OS X 10.7.3. After you have installed the 4.1 update, I noticed that my comments are suspended automatically after 20-25 minutes. They also show a black screen instead of a preview of the last state that guest was before suspending. There are various Windows 7 x 64 and invited Linux. He is running on a Mac Pro with an Intel Xeon "Nehalem" CPU and 12 GB DDR3 - RAM. When a guest is suspended, I check activity monitor, and he claims that a large part of my RAM has not been used since the last start, so it would not be caused by a lack of RAM.

  Change your options of power inside the virtual machine. The screen blanks and then finally goes to sleep. When the customer goes to sleep, Fusion actually suspends the VM.  IF you disable within windows sleep mode and do not forget to disable the shutter screen too since it is the last thing that Fusion sees until the virtual machine goes to sleep.

• Cannot open drive... after the snapshot

  Our esxi4 host is running two virtual machines. As I tried to do a second snapshot - with the help of vsphere client-debian-4-the server process is stopped after a few seconds with the guest operating system is off.

  Von esxi.bk4.local message: failed to open the disc

  ' / vmfs/volumes/4a770d15-f3c30b40-9704-0022154f -.

  f9eff/LML403/LML403_3-000001.VMDK' or one of the

  It depends on the instantaneous discs. Reason: The file

  specified is not a virtual disk.

  Info

  12.07.2010 16:02:48

  root

  As I tried to restart the guest operating system, I received the following message:

  love my life.4 auf esxi.bk4.local kann nicht turned werden: Ein allgemeinen

  Systemfehler ist aufgetreten:

  Fehler

  12.07.2010 16:02:50

  root

  In English: the server cannot be turned on. There was a system error.

  It is also impossible to make a backup with the vmware converter.

  Thanks for any ideas

  Tux-online

  Thanks for the additional files. This makes it easier for me to fix the broken file.

  Now, we must download to the folder of the virtual machine. You should do this via CLI/winscp like I don't know what will happen when you try to download using the browser of data store.

  After you download the file, open the browser of data store. We shouldn't see the delta file.

  Then click right of the virtual machine in the inventory, select 'Remove inventory', right-click on the vmx file in browser data store and select "add to the inventory.

  In "Settings", you should now see the size of the disc OK for the 3rd disc with the size in gray (since it is a snapshot).

  If everything is ok, you can start the virtual machine now or take another cliché before starting.

  André

• Machines virtual FT can be backed up using backup as (VCB, vmware data recovery) technology, which uses the snapshot feature.

  Friends,

  Machines virtual FT cannot be saved using VCB, VDR, because he can't stand not instant. So how can we backup VMs FT?

  Hello

  Please read this article: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1016619

  It is contains guides for VMS backup FT.

• Does not after the resumption of the hibernation

  Hello. I have laptop very slow and unresponsive liked after the resumption of the hibernation. It lasts up to 15 minutes after the resumption and the HDD led is lit constantly during this process. It's a much slower RESUME that my very old laptop with Pentium M processor and hard drive slow 540 RPM.

  What can we do about it.

  Laptop: Lenovo X 220, core i5, 8 GB RAM, 7200 RPM HARD drive. Windows 7 Pro x 64.

  I have a kind of guess the reason - a lot of RAM on x 64. Hiberfil large file. BUT I do not notice this behavior on any computer I've owned or worked on. That they can resume more slowly or more quickly, but after the restart they are responsive as they where before hibernation. I'd rather have it on the laptop too. This laptop isn't, she continues to make the reading of the HARD drive making it absolutely unusable during the process of tis.

  Thank you.

  Thanks again.
  The process that caused strange behavior has been PWMTR64.dll which is a ThinkPad Power Manager background service. Turn it off solved the problem. Resume from Hibernate is normal and all programs are loaded immediately after the resumption. Haven't noticed any decline in the power management feature after the deactivation of this startup item in msconfig.

• Once I do a text comment and click outside the comment, my comment fades lighter than the color of multiple shades, in which it was typed. Someone knows how to fix this?

  Once I do a text comment and click outside the comment, my comment fades lighter than the color of multiple shades, in which it was typed. Someone knows how to fix this?

  Maybe the opacity for the comments of text setting is set to a value lower than 100%... The problem is that there is no way to change it except by using a script.

  Here's how you can do it. After you have created your comment, click on it with the mouse and press Ctrl + J to open the JS Console window.

  In the lower part of the window clear the text that is there and enter this instead and then press Ctrl + Enter:

  this.selectedAnnots [0] .opacity = 1;

  This should change the level of opacity for the comment selected 100%.

  If it works then right click on the comment, go to properties and then click on the 'Make default properties' box and click OK.

  It should now be fixed for any comment that you create.

• When the function customize the toolbar of the new brand of open tab which is the + sign next to the tab in the tab bar finally disappears and it remains so, even after restarting Firefox.

  Every time I have customize the toolbar, it open new tab sign which is the + sign next to the tab in the tab bar finally disappears and it remains so, even after restarting Firefox. This happens only after the update to the new version 4.0.1 it's never happened in older versions 3.x.xx - checked three times. Think it might be a bug and I didn't know where to report is not time and patience to find the appropriate page, so I'm here to improve my favorite browser.

  Did you move the button tab of the palette or another toolbar?

  You can try to click on 'Restore Default Set', which should bring back this button on the tab bar.

  See also:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• I regularly get wrinkles dividing the text which I cannot remove. The lines seem to occur after the typing of consecutive asterisks intended to divide the text segments.

  Original title: wrinkles in text

  I regularly get wrinkles dividing the text which I cannot remove.  The lines seem to occur after the typing of consecutive asterisks intended to divide the text segments.

  Much appreciated assistance by removing the lines.

  Thank you ~.

  1. you must identify which application you use to create your documents.

  2. in addition to the name of the application, you must specify its version.

  3. Please ask your question in the appropriate forum.  Assuming that you are dealing with a version of Microsoft Word, which would be the forum Microsoft Office Word.

  4. Notwithstanding the foregoing, if you use Word 2003, 2007 or 2010, see--> http://www.techrepublic.com/blog/msoffice/add-horizontal-lines-to-a-word-document/3886

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Windows keeps refreshing. Will not stop even after the resumption of the plant.

  A week ago I decided to test my windows aero desktop number. It was gray with a 4.0 remained to a 4.0. After the test, all operable Windows I keeps refreshing. Content not be refreshed but the fact of the shell (if necessary). If I drag the window it will jump to where I started dragging it since. No one knows how to fix?

  P.S. I did a cover of the factory to try to solve, and it did not work.

  Have you also all the updates and service packs - they had erased at the resumption of the plant and must be reinstalled at all.

  You can get in trouble with your device drivers (those on the factory recovery disc may be obsolete).  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get updates for your video card and monitor at least and all the others you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it does not, it could very well be a real hardware problem (since dismissed pretty much factory relocation a software problem, except for updates unless you have already done as well).  Here's how to do a little troubleshooting on your own equipment:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  After that, I would either return it to the manufacturer for repair or find a well known local computer repair shop to diagnose and repair (or replace) the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with Virtual PC: can automatically log on to the comments because the host name is added comments user name after you have entered identifying information.

  When activate the integration in Virtual PC features, then the dialog box "Enter your credentials" appears. After entering the username and password of the system cannot connect because the host name is added in front of the user name that I entered. Example: Guest user name is "Admin". The host name is "XYZ". Vrtual PC try to connect as a user "XYZ/Admin" on the comment system. After getting the error message I can manually correct the user name in the normal windows login screen on the client and open a session. However, no saved credentials, to be asked to log on again whenever I have resize the Virtual PC window. Any ideas how to solve this problem? Thank you!

  Hello

  What is the error message?

  Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  1. when it asks for a password, click Cancel . Without integration feature, you are allowed to log on with an account that do not have a password.
  2. set a password for your current user.
  3. click on Tools , Windows Virtual PC, choose the integration features allow.
  a. type the password, check the box ' remember my references of "and click OK to open a session.»
  b. after joining the domain, logon in XP mode with the local administrator account.

• Win 7 x 64: No. WWAN after the resumption of the mode standby and Bluetooth turned off

  Hey guys,.

  I had this problem for a few weeks 1-2, after the exit of the mode ensures my WWAN - the Sony Ericsson 3507g - modem is invisible and my Bluetooth is disabled.

  WWAN: the light is off, there is no switch on the screen Fn + F5 and power off/on with the hardware switch does nothing either, after a reboot, that everything is back to normal again until you go back to sleep. A few days ago he suddenly perfectly well but when I had to restart, the problem is back.

  Bluetooth: the adapter is always disabled after sleep and sometimes after a reboot, I can not find a model to know when this happens exactly... but I have since my WWAN modem is upward I can't help but wonder if it has the same cause...

  I already did a complete new installation of Windows 7 Home Premium x 64 today and I'm under the latest Vista drivers, because those who do not work with the Ericsson Wireless Manager Windows 7, they ran flawlessly for a few weeks, so that they should not be the problem...

  BOT of the above issues is dealbreakers for me because I'm using WWAN all the time and I use a Bluetooth mouse... then... Please help me ;-)

  Thank you in advance,

  Stefan

  I think I found the culprit: the last time I had this problem I didn't know what was the reason.

  After that the above post I got it works fine until recently it suddenly reappeared without having done me anything (Finally, I've done something, but I couldn't understand that).

  I installed a few games, but nothing about the wwan adapter.

  I also had the same problem to launch a vanilla Ubuntu 9.10 x 64.

  Finally it dawned on me that, just as the problem the first time, I had also installed Ubuntu. I think that something about the way that Ubuntu handles the umts modem makes it behave this way.

  This time (since I seen Ubuntu as the reason yet and I couldn't understand anything more), I opened the Thinkpad and looked for clues as to why this was happening - loose cables and all that - but nothing was wrong. I also disconnected the small backup battery for a few minutes to reset all the BIOS (except the part that is not volatile of course) - who probably had the same effect as turn off/turn on the modem I/O on-screen that solved the problem last time.

  Then, I rebooted, entered the BIOS, responsible for the default installation with F9 and it suited my needs. Since then he has worked flawlessly again...

  I'm not sure that Ubuntu bad, but it's the only logical explanation, and I think that's the reason why some mistreatment of the modem which required a "reset" on the base material, it is why a complete reinstallation of Windows did not do one thing...

  For now, I can just advise all users T500 WWAN to avoid Linux - Ubuntu, especially - at least until understand you what causes the strange behavior.

  Just my 50 ct other people with the same problem so some ideas on how to solve this problem.

  Stefan