Cannot open drive... after the snapshot

Similar Questions

• Cannot access drive after the replacement of material

  I had some hardware problems with my computer recently.  I don't know who that resulted, but the card mother SATA controller and boot hard drive were damaged and had to be replaced.  I replaced the motherboard with the same exact model and the boot disk with a large (300 GB) version of the same model.  All data stored on a RAID1 different set (Mirrored) which does not seem to have been damaged.  The RAID1 set had permissions to full access from the account administrator «MainUser»  There was also an active guest account who did not have access to this drive.

  After replacing the drive start-up and the motherboard, I restalled Windows XP 32 bit operating system using the same CD of installation, login names and password that were used previously.  However, I can't access the data reader.

  I can see the drive in Windows Explorer.  I was able to change the drive letter to the old letter.  When I try to rename the drive I get the message Invalid Volume Label "You do not have sufficient rights to perform this operation."  When I try to explore the disc I get the message post work "R:\ is not accessible.  Access is denied. »

  Motherboard: Asus M2N - SLI Deluxe
  C:\ Boot disk: WD Raptor 300 GB
  R:\ Data drive: RAID1 (mirror) WD 750 GB

  How can I have access to the whole drive RAID1?

  You will have to take possession of it . Or download the file here .

• Cannot open programs after the removal of virus to the AVG Virus Vault and rebooted.

  Hi, I have AVG 2011 Free Edition and when I had a virus, AVG it is removed from the quarantine. He then told me to restart the computer to finish. So I restarted and I noticed that the programs which usually start up when I turn on the computer start (like AIM and others). In addition, when I try to open a program for example Firefox, it tells me to choose a program to open the file. It's really annoying and it won't let me choose a default program to open a specific file. Thank you all for the help!

  You have system restore before you have been affected by the virus?

  http://bertk.MVPs.org/index.html

• Cannot open programs after the installation of Norton

  So, my computer recently picked up a virus affecting internet Explorer. I installed a new copy of Norton Internet Security, when I realized my virus protection was rendered obsolete and the Vista firewall was not enough. The virus is now gone, unfortunately is if my ability to open ALL programs on my computer. When I try to open a program, windows asks me what program I want to use to open the program and sends me an error message. This includes verification of the admin system.

  Hello

  Your best bet may be to restore your system to a point before that you have a virus. I hope it wasn't too long.
  You will need a Vista DVD. If you do not, you can barrow one.
  Here is a nice step by step guide with pictures
  http://vistaultimate.WindowsReinstall.com/repairsystemrestore/repairsystemrestore.htm
  You lose everything was happening between now and the time before delivery, but you should go back to a point where your system works well.
  Please let us know if it works for you.

  Mark <> Microsoft Partner

• Cannot read iphoto library stored in an external drive, after the installation of el capitan and photos

  I can't read iphoto library stored in an external drive, after the installation of el capitan and photos, can anyone help?

  What size is the drive? How are you connected to it?

• Safari throws "Safari cannot open page because the server is not responding" error for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Can anyone help?

  Safari throws "Safari cannot open page because the server is not responding" while Chrome throws an error "this site is not reachable, connection timed out" for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Sometimes, however, I am able to get the site on Google and access one page other than the home page and everything on the site works fine afterwards. I use a Macbook Pro OS X El Capitan (10.11.5) running. Can anyone help?

  Test in safe mode, if it works back to the normal mode safe mode start-up to test again.

  Try safe mode if your Mac does not end commissioning - Apple Support

  Let us know if the problem occurs in mode without failure or even once after start in normal mode.

• I tried to burn some pictures with music on a DVD using Windows DVD maker, but others cannot open or run the disc. I tried to use DVD-R and DVD + R, but nothing works. Any suggestions?

  I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?

  Lol it won't play in my DVD player either. Just the computer.

  =====================================
  This could be a hardware problem with your DVD writer
  but here's something you can try.

  Create your slideshow (photos and music) in the film
  Creator of... and then publish the file to a folder on your hard drive
  walk in the .wmv format.

  Windows Vista
  Getting started
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Then try to use the following free software to burn your DVD:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  John Inzer - MS - MVP - digital media experience

• I cannot open Photoshop after getting a new computer. Can you help me?

  I cannot open Photoshop after getting a new computer. Can you help me?

  Thanks for the update.

  If it is getting locked on screen 'sweep of the presets', press the ESC key to skip this part and then check out.

• Error message"the file is maybe damaged or corrupted 1610153464 / also cannot open projects in the background 26: 142

  Hi all

  I hope someone can help me.

  I use AE CC/Windows 7 on a Dell, 32 GB of RAM, 64-bit op system, processor: Intel (R) Xeon (R) CPU x 5670 @ 2.93 Ghz 2.93 Ghz (2 CPUs).

  So far I had worked on many projects with no problems and then a few weeks ago, project crashing non-stop. The problem has been resolved when I got rid of all the MP3s and diverted to RAM. Once again, it was a problem that I had not in the past and I don't remember changing anything whatsoever.

  Now, it seems that it is impossible for me to export/rendering a project in a Quick time or same AVI file. If its quick time, I get this message: unable to make failure of After Effects error one module output. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: cannot open projects in the background AE 26: 142)

  What is happening with the various projects.

  I have read the forums on hearing that the problem may be a Bug with quicktime and H.264? I never had a problem with it before, but even once when I try to export AVI I get this error message:

  Cannot open projects in the background AE

  I have a feeling that it is associated with quick time. I uninstalled and reinstalled QT, but still not the problem. It will open the old QT files without problem. I tried to download an update of the correction of a bug as a proposed post but I think I have the final reason why it did not work.

  This project has a couple of quick media files H.264. Do I need to convert? They are the cause of all this?

  I'm sorry, I really tried to seek answers in the forums before contacting you here, but I can't find a reason for all this mess, which again appeared a few weeks without any problems for months... If someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

  QuickTime H.264 is terrible. Do not use it.

  Use the AVI file, you have created in your Adobe Media Encoder and use the parameters of H.264 there.

• 'Cannot open file because the disk is not available' Mac

  I recently changed the selection of Photoshop (CS6) Scratch disk to the boot drive by default to one of the other internal drives in my MacPro (OS 10.6.8).

  When I restart Photoshop (CS6) I get the message:

  "Cannot open file because the disk is not available"

  and Photoshop will not start.

  I then restart Photoshop with 'Control - alt - shift' keys

  (suggestion to <http://forums.adobe.com/message/3937003>)

  and reset preferences that allows Photoshop to return.

  (Reset preferences returned the boot drive to drive work status.)

  I have an another MacPro, the - same 10.6.8 OS and Adobe CS6 - and I don't have this problem of allocation of work disk.

  What happens with a MacPro which prevents me from selecting one drive other than the boot drive working Photoshop

  Probably a permission problem.  Run the Apple disk utility to repair permissions.  If this does not work the glance to the non bootable drive and check "Ignore permissions..."  Open the window Info Finder and it came inside.

• aftermath of the warning: cannot open projects in the background (26: 142)

  Renders take a LONG time to start with this dialog error appearing after that is being rendered.

  aftermath of the warning: cannot open projects in the background (26: 142)

  Any idea what would cause this?

  I'm running AE 11.0.0.378 on a Mac Pro 12 - core with 24 GB of RAM and a Radeon 5870 card.

  First of all, make sure that you installed the updates. Since the version number you posted, you have not installed the corrections was last updated.

  http://Adobe.LY/lsrkmJ

• Cannot open or create the file... Permission denied

  I am a new user of LC Designer ES.  After creating and saving a form, I made changes and now cannot save.  Error message in the log report palette tab says "PDF generated successfully.  Cannot open or create the file [file name] permission denied. "No idea why this would happen and how to fix it?

  Thanks for any help.

  If the file is already opened in another application (such as Acrobat or Reader) then you wodul not being able to save as these apps put a lock on the form.

  Paul

• Cannot open 'Documents' because the original item cannot be found.

  By clicking on the sidebar in the finder, received the error of the object:

  Cannot open 'Documents' because the original item cannot be found.

  I spend a lot of stuff around recently because of a SIN that went down.  A lot of backups, transfers etc.

  Just as moving things to normal.

  Have all my backup files.

  If I go to users / #username "/ Documents I get the following:"

  Cannot open the 'Documents' folder because you don't have permission to view its contents.

  cmd - I do not show Panel permissions at all, just said I have unknown access.

  Finally, the fold icon has a small blue arrow in a white circle in the lower right corner.

  I am the only user and admin.

  Do you use a data service on the clouds that fits in the Finder, like "Dropbox" or "Google Reader?"

• I'm having a problem installing Premier Pro cs6, I open it after the instalation can´t

  I'm having a problem installing Premier Pro cs6, I open it after the instalation, my pc its 32-bit can´t, it can work with that?

  No.... Premiere Pro requires a 64-bit operating system

  Premiere Elements is a 32-bit version

  Purchase http://www.adobe.com/in/products/photoshop-premiere-elements.html

• My recipient Receive the answer that the file I sent is not available or that they cannot open all of the files that I send.

  My recipient Receive the answer that the file I sent is not available or that they cannot open all of the files that I send.  I have not had this problem in the previous version of Adobe send.

  We have seen this happen when the link you send is broken up in the recipient's email.

  Using anonymous or custom links? Anonymous, how you send the link to your recipient?

  If your recipient send the link to you, can you open the file it?

• Satellite A300 - Webcam driver open fail after the upgrade to Windows 7

  Hello

  Given that I improve my system to Windows 7 64 bit does not work my webcam. After installing the driver I get the message "webcam driver open failed. "Please restart camera or computer. The camera also do not appear in Device Manager and the microphone are not working also.

  I have a Satellite A300-1LT.

  Help!

  Tal

  Hi pro.surfer,

  You know the forum search? If this isn't the case, you must use because you will find many threads with this error message and lots of useful training, what to do to.

  I put t know which driver you mean, but you need the Camera Assistant Software for webcam. The microphone is a part of webcam, so you need to install the driver for the webcam. ;)