Garmin Communicator Plugin problem

Similar Questions

• Garmin communicator plugin and Safari 10.0

  So just upgraded to V10.0 of Safari. Went to connect my Garmin gps and download a new cache of geocaching.com but says need new version of the Garmin Communicator plug-in. downloaded and installed. He acknowledged my GPS but I couldn't send the new cache directly to my gps I could just yesterday. When I check my mac directory I don't see the plugin Garmin communicator as a picture disc. Geocachers out there having the same problem? Arlene

  If you control - click on the disk image, you get an open option?

• Garmin Communicator does not

  Since yesterday, Firefox seems unable to carry the Garmin Communicator plug.

  When you try to download from my Garmin, I get the message "Garmin Communicator Plugin is not found on your computer" and a link to download. I did it now at least a dozen times and Cap shows as being installed in my Firefox Plug-Ins and Extensions, but Firefox does not semto want to find it and run it.

  I use this plug in for at least the past 2 years without any problem and it still works OK in Chrome which leads me to suspect that it is a matter of Firefox.

  Today, I was forced to use Chrome although I prefer Firefox, however, as the ability to download extends from my watch is vital for me, if it is not sorted I'll migrate to Chrome.

  Any suggestions please?

  Eventually, I discovered the Firefox option reset

  https://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

  and it solved the problem for me.

  Bit late now though, as the issue moved me to a Google Chrome user

• Cannot download book. Get the following message. "Error getting license server communication MW_ADEPT_CORE_EXPIRED problem" I have no confidence in this type of communication because I never received answers from the forums / wish you could afford to live

  Cannot download book. Get the following message. "Error getting license server communication MW_ADEPT_CORE_EXPIRED problem" I have no confidence in this type of communication because I never received answers from the forums / wish you could afford to live person

  I select a book to read in my library, it takes me to digital editions and this message appears. Worked for a few years, but something's happened, maybe I did but don't have and making matters worse there is no contact to fix it. Get the following message. "Error getting license server MW_ADEPT_CORE_EXPIRED communication problem" I have

• Version of the Java Plugin problem

  It seems that the last Plugin Java for Firefox 10.0 that works is version U29. However, Oracle pushes 31 as the most recent version and «» But it does not work in Firefox 10. Not really a problem except that your Web page that checks plugins for "out-dated-ness" indicates that the U29 version is "obsolete".

  Going through the process of updating the Plugin Java from this point is a particularly nasty process (from Oracle fault, of Mozilla) which does nothing of value. It can even install the next version, which, as I said, does not work.

  You can correct your web page so that it does not indicate the U29 version is outdated?

  Thank you.

  OK, I added that a firewall rule out for the program, "jp2launcher.exe" and now the plugin works again. I had already created outbound permission for Java.exe early on that it was necessary, of course, for the plugin to work.

  Of course, this does mean that it is absolutely the solution.

  I would like to say that this is probably the solution, however.

  If it turns out that this is the solution, it means that jp2launcher.exe needs internet access SOMETIMES but not always.

  PHEW! What a pain in the @# *...

  And, Yes, I realize that my setup of the firewall windows 7 has contributed to this problem. I just wish that when a program attempts to connect and is blocked windows 7 this would report to me with a dialog box, as they claim would happen, so I would like to know. There is, without doubt, a journal entry created to record the event, buried somewhere in the windows event logging system. A lot of good it does me, however!

  Thanks again to all for your comments.

  It just shows that there is no problem I can't solve that I don't have everything to create myself. A bit like the Government, if you know what I mean...

  Charles.

• communication continuum problem

  Hello

  I wrote a VI to connect with a converter via the RS-232 serial interface. I'm sending point speed and reading speed and torque value continuously to the engine control. The only program works without any problem. But when I integrate the VI in the main program that measure the voltage and current through the acquisition of data (rate = 5 kHz), serial communication is disrupted somehow, I mean I get from time to time a few zeros for values of speed and torque that night my control loop.

  I have integrated my new VI just like any other loop in the main program and tried to play with the delay, but it did not work. It bothers me that this problem occurs randomly, as sometimes the readings are perfect for 5 min and sometimes from the first few seconds, I get a few zeros.

  No idea what could be the problem?

  Thank you very much

  
  

• global variables for the XML plugin problem

  Hello world

  recently I started working on a dialog box SOUTH, where the user can load the *.xml files in DIAdem.So much my code for the button looks like this:

  ....

  Call the FileNameGet ('ALL', 'FileRead","*.xml")
  Call DataFileLoad (FileDlgName, "XML_Plugin", "Load")

  ....

  And I must say that it works very well! I am able to load all listed in the devices file. BUT when I tried a number of loading devices, I used a global variable, that I defined in the vbscript file that I load the SOUTH since, I've noticed that global variables, I've defined with GlobalDim are not defined in the vbs.:mansurprised of XML_Pluging:

  Then I started to experiment and so far without success, no matter where I define global variables, in my plugin *.xml all not defined! The native commands even and DIAdem functrions does not work. If I run the script in tiara, it shows no errors, but when I use the plugin to open a file, then it gives an error. For example, MsgBox is not allowed.

  I used the plugin example for *.xml, which was published on the Web site of NOR, and I made a few changes. But overall I have it has not corrupted and I kept the same structure:

  Void ReadStore (File)

  Dim XmlFile: xmlFile = File.Info.FullPath
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  'open the file '.
  OpenXMLFile xmlFile

  End Sub

  Void OpenXMLFile (xmlFile)
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  ' Open MS - Xml Parser
  'Create the ActiveX object for the Microsoft XML parser.
  Dim XDoc: set xDoc = CreateObject ("MSXML2. DOMDocument.3.0")

  "Try to load the XML document
  If xDoc.Load (xmlFile) = False Then
  "Failed to load the document XML.
  RaiseError ' unable to load XML document!
  End If

  protected originalLocale: originalLocale = Getlocalte
  "SetLocale" en - us ".

  "The XML document loaded successfully!
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

  '----------------------------------------------
  "Read the header information.
  '----------------------------------------------

  Here, I have read some values of the header and then I loop on all devices present in the file!

  So basically I have two subroutines and that's all.

  SetLocale originalLocale

  End Sub

  So what I am doing wrong? Why global variables and other functions do not work. Is it because there is xml code in the script this way or it's a version problem?

  I use DIAdem 10.2. If I use global variables in other vbscripts, I use to draw curves for example I have no problem. Now I'm no *.xml code and no subroutines.

  I'd appreciate any solution that will make my *.xml plugin to work.

  Hi fscommand.

  It is expected all behavior.  Use XML, as all VBScript DataPlugins, runs in a separate VBScript host of the DIAdem VBScript host.  DIAdem VBScript host adds all global variables green and Red controls global to host Microsoft VBScript standard.  Use VBScript host has its own special abilities (file object, root object), but there is NO access to Globals green or red blanket orders in the reception of DIAdem VBScript.  Your SUDialog runs in a third host VBScript, which is separated from the other two and the other two are not capabilities (command SUDialog callback functions), but the SUDialog VBScript host and VBScript tiara share all global variables green and Red orders overall.

  Normally all blue VBScript commands are allowed in all 3 VBScripts hosts, but in the case of the DataPlugins MsgBox and InputBox functions were especially restrained because the dialogues could cause a lot of trouble with the DataFinder.  In fact, they have been allowed to 9.1 tiara which was the latest version of tiara for the DataFinder appear.

  So, why do you want to pass information between the XML use and tiara?  If you want to use to share information with DIAdem, then you should just expose every piece of information as a new property in the data portal, which can read and use the code VBScript DIAdem.  The path of the XML file is already available inside the use of XML.  What other information in the call VBScript DIAdem do you need to share with the use?

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Chroma DC power supply RS232 communication (read problem of over-voltage and current)

  Dear all.

  I chroma programmable DC power. Based on the programming of the Instrument manual I develop using RS232 communication. Based on the program I can set the voltage, current, over-current protection, protection against overvoltages and make IT / OFF out put supply perfectly.

  But I have to read the measured values of the output power as current and voltage. Measured applications are the voltage and current of the output of the power supply. My problem is two of them read at the same time. Currently, the reading is only voaltge or current (if the first request is v? it is voltage read out but no reading for the current) and if the first request is CURR? the reading for the current, but not for VOLT? The status message is OK, even if it is to read values.

  Thanks in advance

  What I see in your program, it's that you do not use the stop for reading character. For your writing, you do the hard with all these concantanate string functions. You can set the stop character for all entries with a node unique propert - "ASRL end Out.

• Download BB Eclipse plugin problem

  Hello

  I'm trying to download the blackberry eclipse plugin, but it will stop automatically after a certain time.

  My suffering from this problem?

  Y at - it another way to download the blackberry eclipse plug-in.

  PLEASE HELP ME.

  or point me to the URL where I can download.

  Thank you

  Zahid Naqvi

  zahidalinaqvi wrote:

  Hello

  I think I should download and install download the update of the software for the BlackBerry JDE v4.6 Eclipse component Pack

  Yes, install this will give you the opportunity to develop using version 4.6.0 of the whole of the BlackBerry API and use the BlackBerry Simulator "BOLD" within Eclipse.

• Eclipse plugin problem

  Hi all

  I was faced with a problem with the plugin for a while and I can't solve it.

  The problem is any program that I run in the Simulator works in the start. To eliminate the complexities, I created a new project and just have the demo of HelloWorld HelloWorld class as the source. Still, it runs at startup.

  I rechecked the file Blackberry_App_Description.xml. Auto-run at startup is unchekced and it does no entry in the "alternate Entry Points" either.

  Here are some details:

  Eclipse - 3.5

  BlackBerry Java SDK - 5.0

  Eclipse plugin - 1.1.2

  BlackBerry 9550 Simulator

  Thanks in advance.

  I found my problem with always updated application running.  Found on another thread here.

  If you go to the Debug Configurations there is a simulator tab.  There is a text box with the title

  Application or URL launch at startup.

  Make sure it is empty.  Hope that helps, this has been driving me crazy.

• Simple PCI Communications driver problem - formerly gateway Vista 32 Bit Q6600

  Hope someone finds an answer that left me speechless.

  I upgraded from Vista to Windows 7 Home Premium 32-bit version without a problem. However I noticed my video card on the bus PCI did not and I had to use the built in video to installation.  Check in the device he showed intel and a hex code I wanted in the driver database. The entrance really didn't say much. I tried downloads from Intel and pretty much everyone says to install the OS was not correct or the PC did not meet the minimum requirements. So no luck on the Intel Management Engine of the version or the drivers or inf updates.

  The gateway website has my model but supported stopped at Vista 32bits, so no luck there.

  The chipset is the 965 short-lived one Intel at this time.

  It's a shame to leave a really nice pc of themselves to lose. Performance statistics are all very well except for the video those handicapped by Intels minimum support built-in.

  Does anyone know of a for Win 7 PCI simple communication driver that can be done to install it?  Update of Windows, search for the update and the internet search come up with nothing.

  This is apparently a well known problem with few definitive answers. Now, I could say that the driver never existed.

  Experts in gateway, Microsoft and Intel, please save my pc!

  Thank you

  Radstger

  Radstger

  Install the Vista driver in "compatibility" mode

  To install in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Qualcomm-Atheros Communications Bluetooth problem on

  Hi I have a samsung laptop and it came with windows install 8 with her and she also can with Qualcomm-Atheros Communications Bluetooth suite and worked very well until sometimes I don't remember, but it stops working so I tried to update with windows updater and a program of samsung that came with her I have tried and tried over and over again but his does not please me If it is able to fix thanks

  Hi Matthew,

  Please provide more information for me to better understand the issue.

  1. what version on Qualcomm Atheros Bluetooth do you use?

  2. What is the model of the Samsung computer?

  3. what program Samsung have you tried to run to solve the problem?

  4. do you get an error message? If Yes, what is the error message?

  5. don't you make changes to the computer before the show?

  I suggest you to reinstall the suite and check if it helps.

  You can follow the steps to uninstall the software.

  a. press the Windows key + X , and then select Control Panel.

  b. Select programs and features in Control Panel.

  c. Select Uninstall a program.

  d. find the software and click Uninstall.

  You can check the link for the suites.

  http://www.QCA.Qualcomm.com/technology/technology.php?NAV1=49

  For further assistance, you can contact Samsung.

  http://www.Samsung.com/in/support/main/supportMain.do?supportIaCode=10004

  Please get back to us if you have questions about Windows. We are here to help you.

• Java Plugin problem with 11.1.2.2.0

  Try to run the form Builder on my 64 bit Windows 7 box.

  When I try to run a, he always uses Firefox and I always get the message "a plugin is required to view this content.

  FF says: I'm up-to-date with the Java 1.7 plugin so I downloaded the 1.8 (Java Deployment Toolkit 8.0.400.26) and I still get the error.

  FF seems to think that each Java plugin is a problem.

  I tried to put IE as my browser by default, but is still starts FF.

  I searched all morning, but I can't seem to find a solid answer on how to get my forms to run on my windows machine.

  This shouldn't be this course. Come on Oracle, you can do better.

  Joe the Jet wrote:

  ...

  Now I have to sort out why it's not find my TNS files!
  ...

  The plague to have several Oracle products installed on a single computer is bring all use the same copy of the TNSNAMES. ORA.  I like to create a folder in the Oracle home (C:\Oracle) home of my tnsnames.ora and I call it TNS_ADMIN.  Then, add a TNS_ADMIN "String value" entry to your Oracle Home registry entry and set the value of "C:\Oracle\TNS_ADMIN" so the Forms Builder will find your tnsnames file.  Then, you need to change the default.env and update the parameter TNS_ADMIN to point to the directory where you have your TNSNAMES.ora location.  The default.env is located in the ORACLE_HOME\Middleware\user_projects\domains\ClassicDomain\config\fmwconfig\servers\AdminServer\applications\formsapp_11.1.2\config directory.

  If you use Oracle Reports, then you will need to edit the reports.bat file - there is a setting TNS_ADMIN there as well.  The reports.bat will be located in your ORACLE_HOME\Middlware\asinst_1\config\reports\bin directory.  This path assumes that you used the name of 'Instance' by default when you configured WLS and FMw.

  Craig...

• plugins/problems to find answers

  I am very disappointed by the navigation and the lack of easy to use with adobe navigation and CC products. I am trying to find things all the time. For example, I am using plugins that recreate an image in a skit, but each find an i has no instructions and it's not clear how to use it, nor clear how to get help with it. Adobe has a terrible way of communicating what needs to know the real user. I pay for this software and support, and yet I can never find a way to get answers.

  Photoshop has a script: "Charge of the files in a Stack.  Its dialog box is fairly intuitive your shouldn't have a manual to know how to use it. It takes some time to get to know where things are in Photoshop. Photoshop has a huge learning curve.  And its user interface is not the best, especially when you add many Add ons and create many scripts and actions.  Photoshop has many limitations and you can exceed the capacity of pallets as the Actions palette and menu scrolling one Adobe point to a time where you have a lot of scripts is the well.  And it is generally more one way to do things in Photoshop!

  

  

• Web browsers are no longer because of the version of the Flash plugin (problem reappeared after a prior solution)

  jeromiec83223024

  
  

  
  

  I was part of a focus group in which Lenovo many users had problems with the Flash plugin on their web browser (Re: does not have a plugin (Shockwave Flash). ) forums.adobe.com/message/7992871#7992871). Problems consisted largely of messages does not work on Chrome, Edge and IEon websites such as Facebook, Youtube, Gmail and others who use chat or to play html5 videos. Chrome, the message indicates that a plugin (Flash) became unresponsive, and then the page can no longer be reacts with. On the edge, it just stops responding. These problems have been resolved for a few days now, but after that my Windows updated again last night itself, the problems came back.
  

  Everyone knows these question make a comeback? I use a Lenovo IdeaPad Yoga 13 with Windows 10 x 64.

  Hi Jean-Luc.

  Yes, hardware acceleration is turned off in the Chrome settings and via the global settings for a while (before the error on which came back again). Will let you know if this problem persists. If all goes well, it was something unique. I have "he's trying to use right Chrome to see if the error appears again.

  Thanks again!