Chroma DC power supply RS232 communication (read problem of over-voltage and current)

Similar Questions

• Power supply with Satellite M30x problem

  When I connect my Satellite M30X in power, he sometimes shows the power light and the battery light. It can then be turned on and will start and run.
  Most of the time the power light blinks and the battery light stay out: it will not illuminate.

  When it turns on, it will work for a period of a minute or two till about 4 hours and stops randomly.
  Now the led starts flashing and continues to Flash while it is powered.

  There must be some problem with electronic control gear. Strange is that this problem occurs from time to time.
  Sorry, but if you want to get rid of it you must contact Toshiba service and let check your laptop.

  To be honest, it can happen that
  Entire motherboard must be exchanged, and it can be quite expensive. Might be time for the new laptop computer. Satellite M30 is really old.

  What do you think of all this?

• Downgrade of BIOS N100 (problems of USB voltage and battery charger)

  Hello. (Sorry for my English). I have problem with my computer laptop lenovo 3000 n100. I must downgrade my bios to version 1.08, because I have problem with USB - when I click on a button on my keyboard for example my USB was disconnect. Can someone tell me what should I do to downgrade? (Windows XP SP2)

  I have download v1.08, install, but when the program flash my new version of bios of my laptop BSOD 1 seconds...

  Concerning

  
  

• G4 MDD power supply Issue

  My MDD was recently stop only two or three minutes after a cold start. The power led lights up, the gray screen with the Apple logo appears with the spinning wheel, but then the machine suddenly loses power as if the power cord was disconnected. These are the things I've already tried:

  1. Removed the PRAM Battery
  2. Disconnected all devices except the keyboard and the monitor
  3. Tried a different power cord

  Start in safe mode did not help. The fans are all running, the red LED lights on the logic board and disk drives seem to work. This could be a power supply issue or a problem with the motherboard and is it possible that I can definitely identify the problem without being able to start the G4? The startup time has been considering more when everything worked last week, would that be a clue? I've owned this machine for more than twelve years and it put to the test so I wonder if it's time to retire him.

  Thanks in advance for any help you can offer!

  Hi, looks a lot like a problem of heat from the CPU, thermal paste is usually good for 5 years or more.

  It runs longer open door?

• Control via RS232 interface labview DC power supply

  Hello world!

  I'm new to labview and I'm trying to control a DC power supply using a serial RS-232 (output voltage). I can't use an interface Gbspecifications TO have only a single module that is used for another task. Any advice on how to go about it in labview?

  Thank you very much!

  Find the driver for your device here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=510F94BB50256F51E0440003BA7CCD...

  It will work for GPIB or series with VISA.

• Corsair POWER supply update does not post, powers of the powers of 5 seconds down and loops...

  Have the HP Pavilion Elite m9650f with motherboard replaced in April 2012 class good to go.

  Replaced the stock GPU Nvidia GeForce 9800 GT with a Zotac GTX 560 Ti GPU and

  the stock HP 460 Watt power supply with a W0388RU Thermaltake TR2 600 Watt PSU in may 2012.

  All goes well until October 2012.

  PC randomly starts shutting itself off the coast and not feed until I have unplug the power cord and wait 5-10 minutes.

  Finally, he stopped turning on all together.  Reinstall all power PSU connectors, etc.  same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstall the stock HP 460 Watt PSU, now everything works fine.

  Thought it was a premature failure of Thermaltake PSU.

  Bought and installed a Corsair CMPSU - 850TXV2 850 Watt power supply for a few days but still not good to go.

  Lights, fans spin, but no MESSAGE, no video, tracks for all

  5 seconds, stops, turns on itself over and over again.

  Reinstall all power PSU connectors, etc. same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstalled the HP PSU stock, now everything works perfectly again.  ?

  Spends hours reading the forums...

  Some say that the RAM may not report correct voltage for power supply.

  If so, what can I change RAM voltage in the BIOS?

  Others say reset CMOS I did, same result.

  And someone on this forum HP thought that perhaps the Pegatron IPMTB-TK

  Card mother Truckee can only accommodate up to 750 Watts POWER supply.

  Any ideas?

  Can I get away with just using my HP 460 Watt power supply after all stock?

  Thank you.

  I have an additive to add to this topic.

  To refresh, my questions focus on a possible shift of the power supply and card mother specs:

  What is an ATX 12 v 2.0 and above technical problem or a power CAP problem?

  I posted my questions on the Forum of power SUPPLY Corsair PSU

  at the same time and I paste it here now, a response

  to GUY of RAM.

  "Hey RAM GUY."
  
  Sorry I couldn't answer until now.
  
  Please specify the difference between the ATX 2.0 specification and 2.01
  
  Spec that the negative - 5 v Rail is not present in the 2.01 spec and
  
  beyond.  As I mentioned previously, the Thermaltake PSU that has been
  
  running in my 2009, HP i7 tour for 7 last month said 12 volt ATX 2.2
  
  on the case and even if the power supply HP OEM said 12 volt ATX
  
  2.0 in the technical literature, that I found on Google, the real PSU I have does not work
  
  have any note on the case ATX specification.  So I think it's safe to say, my
  
  motherboard does not have the negative Rail v-5 at which he played
  
  nicely with 12 volt ATX 2.2 spec, until recently.
  
  Although theoretically it is supposed to be no limit on the amount of
  
  Absorbed power, you can use to power your motherboard, the motherboard because
  
  is supposed to use only what suits him and cap the rest, it seems that the OEM
  
  can dial up limitations of power if they deem necessary.
  
  Could be as simple HP, without wanting to compete with some of his HPs
  
  Professional workstations, caps so power on some Pavilion Elite
  
  Series models to prevent them from becoming a much cheaper
  
  solution.
  
  In any case, I think that all the available information, digested, he does not speak
  
  Specification of the ATX, but rather my motherboard HP has a limit of 650 Watts of power
  
  If I think that I read that someone else got the same motherboard goes with
  
  750 watts, but I do not remember where to find this announcement. »
  
  I'm back and Yes!
  
  Thanks again Lasvegaswireman!

• How to change the power supply to the CD/DVD drive so that it is disabled by default?

  When running on battery I often use the icon 'Remove hardware safely' XP to 'unplug' the carpet * CD/DVD drive for Safe some battery life. (Does?) I use Fn + Tab to bring back to life. I wonder if there is a way to make my boot Notebook (M400) with the power supply to the reader off by default. Moreover, any idea where I can find the extra battery for the slot of the CD/DVD player and who the price?

  Thanks in advance for your help.

  Hello, Robert

  If you see the start page, you will see that this support forum is not a type of support Toshiba directly but forum users. But you're not alone and many users expect that a Toshiba support team sit in the office and before writing the answers.

  In any case, there are many users of Toshiba laptops with very good knowledge and also amateurs who are trying to help the other guys in different problems and also to share own experience.

  Professionalism is not the forum but action when you need help because of physical damage or something similar. If you need assistance and competent answers each authorized partner must be able to provide the info you need. But please don t mixture and Toshiba service partner because it is not the same.

  In any case, I found the info you can use additional (second battery expansion) and it takes batteries with PA3510U-1BAL, PA3510U-1BRL room numbers. I can't tell you how much it costs, but you will find only using Google.

  Back to your first question: if I understand you just want to save more power and because of this, you want to sign out ODD. It's a nice idea, but you have clearly misunderstood something. "Safely Remove Hardware option is there to help the operating system and and say this material, a part will be removed and don t exist anymore, but it does not physically the disconnection of any other material."

  If you need more power use a second battery and enjoy your life.

  If you have any other questions you are welcome. A lot of users here M400 and I hope in the future that some of them will participate in a little more.

  Good day! :)

• Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?

  Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)

  So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.

  So first thing, I would like to replace:

  Replace the 2 x 2 GB ram cards default with:

  4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins

  For a total of ram 16 GB with my x 64 bit PC of course

  Link: http://AMZN.to/KtMt9m (note that I buy two)

  Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?

  1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms

  For the graphics card + overclocking.

  Link: http://AMZN.to/IkLTdp 

  Finally no more ATI integrated BS... Please for the love of the creator (will it work?)

  1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI

  If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)

  Link: http://AMZN.to/IFiEa2

  I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...

  -----------------------------------------------

  Card not present upgraded

  HP Pavilion p6510f PC / Nr WW639AA #ABA

  Four cores AMD Athlon 630

  4 GB Ram DDR3

  HARD DRIVE 750 GB

  Integrated ATI Radeon graphics card...

  Power Max Power 250W

  Windows 7 Home Premium 64-bit

  -----------------------------------------------

  Thank you! ~ Of Amerindian

  Hello

  According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.

  You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation.  Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules.  If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.

  You should be able to make your own decision on whether to roll the dice.

• Update of firmware for r.620 750w power supply

  I'm under OME v2.0 and he pointed out that we need to apply a critical update to our power supply 750w on our servers r.620 (Power_Firmware_JX7PR_WIN64_09.2B.80_A00. (EXE)

  I installed the update on 2 of our r.620 servers and did not receive any errors.  After the update process is complete (and several reboots), it still shows the older firmware (v07.2B.80) is always installed.

  Curious to know if anyone has had this problem or updated their firmware to power supply.

  If you read the documentation on the 09.2B.80 update, it says:

  WARNING: after successful PSU FW updated on PSU PN: 5NF18 Version of FW on power supply must be 07.2B.80

  Before the update, my power supply has had the 07.2B.7D version and after the update, they have 07.2B.80. This means that they have in fact been updated. However, because the version of the package is 09.2B.80, things like OME will still say that they need to update because the version numbers do not match exactly. The most stupid thing ever and totally bored. All the time, I lost to try to get updated when he was already.

  www.dell.com/.../DriversDetails

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• HP pavilion a1710n power supply needs replacement.

  I have an old HP Pavilion a1710n desktop power supply crashed and burned and needs to be replaced.  I've never been on a power supply on this computer before I upgraded memory and dial-up fans in the past.

  I already ran through the list control to full power on this site to confirm that it is food that is broken and needs replacement and no cord or anything else.

  I also confirmed what power to order part.  At this point, I just need to see a video of step by step on how to replace the power supply inside the computer tower or read the good strong guidelines for how to do it.

  Some advice there?

  Thank you

  It doesn't seem to be a video on the site of HP but it is an easy process.

  (1) turn off your computer and disconnect the power supply. Remove the power cord from the power outlet.

  (2) open the casing and place the computer on its side (open side upward).

  (3) take pictures where going to each power cable.

  (4) disconnect all power connections.

  (5) remove the four screws on the back of the housing supply by keeping in place.

  (6) turn the power off (can be a "locking tab" now in place.

  (7) reverse the steps to install your new power supply.

  Refer to photos for the location of the place where to reconnect the power cables.

• Power power on Satellite C870-1FZ problem

  I use my laptop on WIndows 8.1 - 64 bit.

  When the power cable and the battery are connected, the laptop just will not start. When I remove the battery and use only the power cable it starts and runs normally. It also seems that the battery does not load.

  Who has a solution for this problem?

  Hello

  I m bit confused why the laptop does not power upward with battery connected.

  Generally even if the battery would not charge due to the age of the battery, the laptop must turn on correctly.

  However, if does not resemble the adapter would be defective because the laptop works properly using the main power supply.

  That's why I came to the conclusion that the battery or card mother s electronic power supply could cause this problem.

  As a new battery is much cheaper as a new motherboard, I recommend you to check the functionality of the laptop using another, compatible and good working battery.

• Satellite L300 booted on battery but not on power supply

  I have a problem that has developed with a computer for daily use about 3 months ago.

  When the computer is connected to power at startup, the computer starts at halfway in Windows XP with the first XP screen and then it sounds like the disk hard knocking and stops and then the screen stops and shakes with a lot of lines and bands in the screen and the distortion and the machine hangs.

  I must then hold down the power button and restart.
  I can then start it in safe mode.

  If I have the computer on the starter battery, it always starts normally and all is well.
  Once the computer all them booted up, I can then connect the power supply and run it all day.

  Any ideas why the machine hangs at startup when it is started on the power and no battery?
  I had plugged on many energy sources and even changed the power supply with another machine, and it still has the problem.

  I have loaded all drivers and the latest bios driver and display driver.

  Don't you think that it is a hardware or software problem?
  Thank you!!

  > Ideas why machine freezes on boot to the top when it is started on the power and no battery?

  In my opinion its definitely a hardware problem. The question is what part is affected.
  I think you should test another adapter.
  Abnormal power supply may cause these problems.
  Otherwise if the AC adapter isn't the troublemaker, I think that this failure of the only motherboard may cause this problem.

• power supply HP API3PCB4 model: power supply wiring

  Hello, I do a bench on an old power power supply but it don't know the wiring and I can't find the wiring digram please help me.

  Tom, welcome to the forum.

  I couldn't find any wiring diagram for the power supply.  However, here is a guide for all connectors that are commonly used.  This can help you identify on your power supply.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• P7-1510: HP Pavilion p7-1510 Power Supply Upgrade

  I want to get a decent (and affordable) graphics card for my desktop but know I have to add a more powerful POWER supply. What is a decent 500-watt power supply? What is appropriate for my case and it's something that I can install myself? I'm a little bit saved computer... but also know a good local computer shop I couldn't get to. thanks.

  You are welcome.

  Yes, the Thermaltake PSU works perfectly.  The PSU is the backbone of the computer.  If you look at the customer reviews, it is rated 3 eggs with 228 comments.  Therefore, if you buy a brand that is not quality it will not last as long.  The PSU is the component most replaced in the computer because of the work he does.  I always recommend Corsair products because they are passionate about quality with a reasonable price.  I hope that answers your question.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.