Communication from router to router via an ISP router

Similar Questions

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• How to transfer files from PC to PC via a serial port using labview

  I need to transfer files (.txt, .doc, .xls) from PC to PC via a serial port using LabVIEW. Is it possible to transfer files, if so how to transfer?

  Yes, it is possible to transfer files with the serial port using LabVIEW.  The files are just collections of bytes and the serial port is good enough in the expedition of the bytes from one PC to another.  You must connect the ports series with a null modem cable.

  First, take a look at the example of serial communication.   In LabVIEW, go to the Help menu and select «Find examples...» ».  From there, you can search for "serial" or navigate to hardware input and output > series.  Select «Write series base» and Read.vi  Try this example to gain confidence on the serial communication methods.

  Then it's time to learn how to read and write files.  For this, the examples might be somewhat confusing as they deal with files that are presumed to have data of a specific type in them.  I would recommend just familiarize yourself with the functions in the file e/s palette.  Specifically, familiarize yourself with the following functions.

  1. Open/create/replace file - on the side of your destination, you will need to create the copy of the file you are trying to transfer
  2. Close the file - when you're done reading or writing to a file, you must close it.  It cleans the memory used and finalizes write operations that are still floating in the write buffer.
  3. Read a binary file - is the best way to play a file when you don't really like what type of file it.  In your case, you just want to get these read bytes and sent so they can be written down instead of destination.
  4. Write to a binary file - next to the destination, is what will store the bytes in the file that you created with the number 1.
  5. Size of the file get (under the range of the advanced features of file) - you need to know how big the file is, so you know when you are finished.

  OK, so once you are able to create files byte write and read bytes from existing files, you can move forward.

  I suggest the basic method is to have the user specify a source file on the source PC, and a folder on the destination computer.  Then find the size of the source file using the number 5.  Divide this number of size by the number of bytes that you want to transfer to the times.  The series pads are usually around 32 k (if I remember correctly) in order not to exceed that.  Now start to send data by reading a number of bytes and this string output wiring to the feature of writing VISAS.  On the side of destination, you will want to monitor the serial port for bytes and read when they arrive.  This string of yarn to the writing of the function of binary file to add them to your destination file.

  This is the basic outline of how to do it.  He needs to not to overload him write and read buffers on the serial ports.  Initially, you can use delays on the side sending to make sure that the side reading has enough time to digest.  To make things faster, you can bring in a control of flow.

  If all that sounds a little intimidating, there are there Alliance member companies (such as the automation of PrimeTest) who can write this code for you and even provides a turnkey for you solution.

  Happy wiring,

  Dan press

  Certified LabVIEW Architect

  PrimeTest Automation

• How to print from an Android device via bluetooth?

  You had purchased the Mobile 100 Officejet printer to print from your Android device via bluetooth.

  You have paired with bluetooth devices, but do not see an option to print or the "print" key does not work in this case.

  Well, here is how this can be accomplished in Android.

  For this example, I'll use the steps to print a photo.

  1 pairing.

  2. open the photo you want to print.

  3. Select the share option (for example can send to aid based on the version of Android).

  4. Select Bluetooth.

  5. Select the printer in the list of devices.

  6. the file will be sent to the printer.  You can check the notification area upstairs to check on the status.  It may take a few minutes to send at the end.

  7. it must then print the photo.

  Bluetooth HP printers support printing of photos only, but a third-party application can be used to print documents and other items.

  Hope this information is useful.

  I know there has been many cases of users who were not able to print via bluetooth since an Android device.

• How to download data from test to SFIS via webservice

  Hello world

  I need to download data from test to SFIS via the webservice and the service will return the result., but I have no idea of web service.

  I need to submit as soon as possible. If anyone can write it.

  You start by the seller. How do get the data? HTTP put and get operations? Customer HTML screws can do that.

  Which makes the network based thing you are trying to send your data? It would be useful to know. You see SFIS, MY or LIMS are terms all very generals who actually communicate very little useful information (see also: "buzz words").

  Mike...

• Invite communications from the day before

  Hi All,

  EBS 11i

  9i

  RHEL5

  D OC 216212.1

  Section 3: Create the physical standby

  Step 6. Invite communications from the day before

  
  

  What is the mandatory part? Or I can still connect my apps even standby without running this.

  
  

  
  

  Thank you very much

  JC
  

  
  

  
  

  Hello;

  It is a security option. If it will work with your Setup, I would use it.

  Additional information:

  https://dba010.WordPress.com/2011/02/07/securing-the-Oracle-listener/

  Best regards

  mseberg

• The administration server is not reachable from the node target via HTTP (S)

  Hi all
  
  I tried add Host in Oracle 12 c. I previously added Linux host OS, but I couldn't add OS AIX in 12 c. I did the auto update for Agent of AIX. You can find my OS and DB info on below.
  
  Server Oracle 12 c - OS is SunOS 5.10
  Client host Oracle 11.2.0.1.0 - OS is AIX
  
  During the installation, I got this error message "the administration server is not reachable from the node target via HTTP (S). In topology, we do not use any firewall... As I said I've added Linux and SunOS but AIX does not...
  
  How can I solve that?
  
  B.R

  You already mentioned the metalink note? Otherwise please see note

  EM 12: Agent deployment fails with error "the administration server can be reached from the node target via HTTP (S)" [1393450.1 ID]

  Kind regards
  http://www.oracleracexpert.com
  Remove the grid or the repository targets control agents
  http://www.oracleracexpert.com/2010/06/remove-grid-control-agents-or-targets.html
  Tablespace transportable export and import on the same Endian platforms
  http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html

• Satellite L25-S1192: WLan disconnect when moving from router

  I looked in the nets, and I can't find an answer to my exact problem.

  I have a laptop Satellite L25-S1192 and XP running.
  My problem is the Wi - Fi works very well until I'm 10-15 feet away from the router.

  Once I get beyond that point, I lose the connection even if when I display the network connections it shows that I'm still have an excellent signal and always connected. Other laptops work in the House and I did several other tests to rule out the router.
  I updated the driver but nothing seems to help.

  Given that the connection is working near the top which tells me the settings are correct.

  What Miss me?
  Any help is appreciated.

  Hello

  In my view there is nothing wrong.
  The WiFi signal seems to be too low and therefore the WiFi disconnects.

  I think that this happens when you run Notepad with battery operation. Right?

  Well, you can go to Device Manager-> properties-> Advanced tab Wlan card
  There you can check if the WiFi network is set to mode harder

• is it possible to connect with SSH from router to router?

  is it possible to connect with SSH (1.0 or 2.0) to a CISCO-router/Switch to another CISCO-router/Switch?

  I think that an SSH connection to a router/switch is no longer possible to a women (Windows/Linux/Unix)

  is it not?

  I don't know if Cisco Compatible SSH 2.0, but there IOS - s that support ssh 1.0 and you can connect with ssh 1.0 from a cisco device (if it supports) to any device with

  Router # ssh?

  Select encryption algorithm - c

  -l Log in using that username

  options to specify o

  p connect to this port

  Address WORD IP or hostname of a remote system

  Router # ssh x.x.x.x

• MY laptop gets a strong signal from router but it does not connect to the internet.

  While trying to install a wireless adapter for my xbox (which I always did not), I was looking at settings in the laptop and must have changed something.  I tried to restart all the components involved as well as the restoration of the system, nothing works.

  Help, please!

  Hello.

  1. you get any error message?

  2. you are trying to connect the Xbox to the network?

  Please follow the steps mentioned in the articles below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Print directly from iPhone without internet via special Wi - Fi?

  Hello world.

  I want to print labels for shipping directly from the iPhone.

  I guess I need printer active AirPrint.

  My question is: did someone knows such printer which will also save me the need to buy a router wireless (Wi - Fi) because the printer itself creates ad-hoc or a direct wireless connection?

  Thank you very much!

  Canon offers a selection of printers that have this feature, their page can be found here. (Sorry, I live in Southeast Asia) They offer the AirPrint and functionality you described, which is not AirPrint. Personally, I use the MG7170 model. DISCLAIMER: I do not receive a financial reimbursement to promote all recommended features.

• stretching from the internet connection via a wired ethernet cable

  Hello

  First time poster. I have a netgear R8000 Nighthawk on my 2nd floor. I intend to use an ethernet cable connected to the R8000 and bring it downstairs in my living room. My question is, is - it possible to be able to connect the ethernet cable in the living room to another router and then connect up to 3 devices (apple computer, smart tv, tv) via ethernet cables? I prefer wired connections. I am aware that I can use as the EX7000 netgear router as access point, but other devices may only be connected wirelessly.

  Any help would be appreciated

  Thank you very much!

• Transfer photos from Mac to iPhone via airDrop.

  Picture of the application.

  MacOS Sierra, IOS 10.0.2.

  During a transfer of photo through release, location data are not always transferred? On the Mac, they are there, but not always on the iPhone after the transfer.

  Thank you.

  Out of curiosity I tested with a few pictures in my house:

  1. Select a photo, then menu of the UTI share pour export to Airdrop on my iPhone-> location not available on the phone
  2. If I first made an export of the photo through "file > exporter > exporter the original...". "and the transfer if I picture after via the of Airdrop in Finder, the picture keeps the location on the iPhone.

  The same home?

  Edit:

  Here Re: dump photos to another Mac it says that you must export the photo first and then it drops to your other device. But he has post comes from 2013. But I also have the problem that Aidrop via the share menu in photo delete location data :-(

• VISA: Communication with "Optris Laser Modul" via a port series

  Hello

  I use a "Optris Laser Module" for measurements of temperature (see attached pdf). This module could be connected via usb to the computer. The pilot of the laser module generates a serial port (COM4 on my PC). The manufacturer's software works without any problem.

  The next step is to use labview for communication. Unfortunately, I did not find driver.

  The manual shows the adjustments for the serial port

  baudrate: 9.6... 115,2 Kbauds

  data bits: 8

  parity: none

  stop bits: 1

  FlowControl: no

  Normally, the module communicates with a binary protocoll. With a special order, it is possible to change the protocoll in ASCII. To change the protocoll you must write "Dezimal: 131" or "HEX: 0 x 83 '. The answer should be 1 byte with '0 = protocoll binary' or '1 = ASCII protocoll.

  I wrote a little VI (see table at right) to change the protocoll. I am not getting any error, but also no answer.

  Anyone have an idea where the problem could be found in the code.

  Thank you very much and best regards,

  Michael

  P.S.: If you attach the code, please use LabVIEW 8.2.1, if I'm not able zu read the code. Thank you.

  Attached: Small manual for "Optris Laser Modul" and VI.

  You would be he catalogued to U16

  

• Impossible communication with an electronic card via the USB port of the United Nations

  Hello

  I must communicate with a normal electronic card a mini-USB port / USB (serial, COM4). This card transmits on the airwaves on a frequency range that I must address.

  When I plug, the PC detects it and accept it (I installed the driver). Plug-in the HyperTerminal in Windows XP to send instructions in hexadecimal this carte pour what change the range of frequency on which it issues.

  Furthermore, neither MAX nor Agilent Connection Wizard not the detected and none are able to communicate with it, everytime the same message error "no device detected".

  I tried under LabView to send instructions with assistant IIOA, no results. I also tried the instructions 'Config VISA' and 'Entry VISA', trying to write in hexadecimal and normal mode, nothing works. Under labView I have yet no error message, nothing. Nothing.

  I don't understand. I know that it is still possible to drive it under LabWindows, but under LabView (8.5) nothing, not a clue.

  I have the latest version OR-488. 2

  Y ' have a procedure to follow pour such communication of?

  Thanks for any help that would be welcome.

  Kind regards

  Zoe.

  Hello

  The NOR-488 driver. 2 is the driver for the hardware from National Instruments GPIB; If you communicate to the port of of a USB through, this will not impact your code or on the resources used. The only element in common with your VISA application EST enhancement. It provides a unified API pour different types interface with instruments (series, Ethernet, GPIB, VXI, etc...).

  Under MAX, on cannot hole your communication card, only the serial port. The first chose to do is therefore to ensure that the serial port 4 is clearly visible under MAX. You can then the uti Test Pannel VISA pour send and/or receive orders to/from your card.

  If these elements do not allow you to properly configure your hardware, n 'hesitate to send a capture d' screen of the configuration under MAX. If you have a CVI code that allows you to interact with the map, it might be interesting to join, so you can see how interactions with the material are made.

  Kind regards