HP LaserJet M125nw MFP pro: printer HP LaserJet MFP M125nw pro - analysis not through phones android cell phones

Similar Questions

• HP LaserJet Pro MFPm127fw: Printing Chromebook stuck in class and will not print

  My printer cannot print - things are still ongoing, but stay there for days until I delete them.  Everything is turned on and connected.  This printer has printed successfully for me before, but it goes through these phases where it stops printing and it has not printed for a week now.  I uninstalled, re-installed, all done.  My HP Chromebook detects the printer, shows pending print jobs, but they do not print.  Other aspects of the printer are very good, IE. Fax works.  I even don't try to use the email address to send documents to the printer... nothing works.

  I'd appreciate any help.

  Thank you

  Hello

  Please try to use printing HP extension for chrome to see if that helps. I've included below installation instructions.

  http://support.HP.com/RS-en/document/c04683559

• HP laserjet pro 6500 not completely... install scaner will not computer analyze

  HP Laserjet Pro 6500 not completely installed. I followed instructions troubleshooting, and that did not help.

  It is an Officejet Pro 8500. Where a few points stop every time I reinstalled it and restarted I couldn't keep track of what worked. The final fix was unpluging the power cord to the printer and the power outlet.

  Problem solved.

  Thank you

  SS

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• LaserJet 1022n pilot Wireless does not work for Windows 8

  I am just checking that the 64-bit of Windows 8 for the 1022n driver will work for wireless printing. I have been unable to operate and I noticed that the pilot says that it is for basic printing. Does that mean he does not support wireless, and if yes then when they will fix it. Anyone know?

  I'm sorry you have a problem with wireless printing. I'll be happy to help you with this problem.

  The BASE DRIVER means that you will not be able to SCAN and other features with the software. You can print only.

  It seems that this printer doesn't have the feature wireless without (external optional accessories). The Laserjet 1022NW printer, had the wireless feature, but you will need to connect to this printer via USB cable.

  '"Click the WHITE STAR if you want to say thank YOU" '

  I hope this helps.

• El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

  El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

  Open Printers & Scanners, select the Pro 100 and remove it from the list of printers by clicking the button "-". Then click on the button "+" to add the Pro 100 again.

  If wrong you again then try to print a reset of the print system. Note This action will remove all devices breeders & Scanners, but not supported drivers, so you just need to add the printer again. To reset the printing system, open Printers & Scanners and rest the mouse pointer over the list of printers. Then right click on (or hold down the command key, then) and select Reset from the context menu that appears. You will be asked to enter your password for the process to continue.

• OfficeJet Pro 8620: officejet pro will not automatically print incoming faxes & answer

  I have a brand new Pro of Officejet 8620.   When I receive incoming faxes, I must be at the printer to press the ACCEPT button on the LCD screen.  I put the printer/fax AUTO ANSWER.    It did not work.  Any suggestions on how to have the unit automaticlly answer & print incoming faxes without having to be in the machine when machiines phone line rings.   I put the machine to meet Telec.  It is not set to meet incoming voice communication.

  Thank you for your informative reply!  PROBLEM SOLVED.  I was able to access the HP phone support people yesterday afternoon.  They very kindly put me through many of the steps you mentioned, that didn't work.  Finally the second support officer who got me the steps I have press the RESET button in THE SETTINGS on the LCD screen by DEFAULT and immediately after this step, solved the problem.

  My suspicion is that the machine, although that brand new, was in fact a refurbished machine sent to me by HP to replace the original purchase, which had a LCD screen showing only Chinese language that could not be changed.

  The replacement machine probably had been implemented at the different use of mine.

  Thanks to the lady who finally suggested hit the RESET button to THE DEFAULT SETTINGS as well as other people who responded!

  Everything is fine!      Aaron

• printer pro 8600 - 2 trays stops printing all nite at 19:00 error not connected printer States

  My pro HP8600 printer has malfunctioned since new right out of the box. HP has been unable to provide the solution. Every evening at 19:00 the printer stop printing and won't return until I restart my PC/laptop. I have a HP 4100 on USB printer that works very well. The 8600 will be fax and copy, but won't scan or print emails or documents. Error state the printer will automatically disengage when it is not. I restarted the printer, but it does not help. All the tests I did on the network IP address of departure etc. PC is running XP

  Okay, I think it's a XP bug that exposes HP software. See the following link for more information:

  http://support.HP.com/us-en/document/c03149924

  Also, even though it is not stated in the article, putting to Vista or 7 would also "resolve" the issue.

• Windows 7 Pro will not restart if printer on.

  Hello

  When you click Restart, Windows 7 Pro will not reboot with a printer hp (L7680 or C309a) turned on.  The screen remains right on "Starting Windows".  Windows continues to load after that whatever printer is turned on.

  This problem just started.  Never happened before.  I could always click on restart without problem before.

  Any help?

  Hey joe_do,

  I see that you have a problem with the sequence of starting your Windows 7 Pro computer when one of your 2 HP printers are turned on.  How are these 2 printers connected to this PC?

  Looks like that devices can be connected to USB and somehow the computer boot sequence put the emphasis for USB on the internal HARD disk.

  Jason

• Utility HP sees printer, Macbook Pro is not

  MacBook Pro OS 10.6.8

  HP Photosmart 7515

  Belkin F5D8236-4 router

  Everything worked fine (might print wireless from the Macbook Pro, IPad, and IPhone (using AirPrint on mobile devices).  Got a new modem cable Xfinity and our old Belkin router not Gigabyte connection, so I had to get a new router.  New Belkin and Netgear both wouldn't allow printing of Apple products however, they all managed wireless connected to the internet via a router.  (I work on a PC and surf/printing was never a problem).  Do you have some research and suspicious with compatibility Hello and router issues.

  Then, I put old Belkin in service and, unfortunately, now all products Apple cannot print with it.  (All still connect to the internet through a router).

  I tried everything and can not replicate the success I had before.

  The HP on the Macbook utility sees and communicates with the printer without problem - pages trial, settings, etc.  HOWEVER, when I go to add a printer in the OS, it does even not see the printer.

  How can the talking printer and computer via the HP utility, but the computer does not even recognize the printer in its own device in place?

  Help, please.

  Oh, I thought that may have loaded the software from the CD for the printer somewhere along the way.

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

  Try the scan using the Image Capture in your Applications folder.

• Quick Books 2008 pro does not work on my windows Vista

  Why my Quick Books pro 2008 not working correctly on my windows Vista?

  You can visit the following Intuit post:
  http://community.Intuit.com/posts/setting-default-sales-receipt-multiple-templates

  If this does not help, then you must contact QuickBooks support.
  There have been problems with QuickBooks does not print PDF so that files may be a similar problem.

  You can post in the following QuickBooks community forums.
  http://community.Intuit.com/category/printing-in-QuickBooks

  Sincerely,

  Marilyn

• My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  It was AC off recently?

• iPad keyboard Smart Pro does not

  iPad Pro is not intermittently at the Smart Pro IPad keyboard.

  Your occurs when you attempt to enter text in the field application of e-mail address

  When the mail application has been opened by Safari to post a link etc.

  Hello BobBurns,

  Thank you for using communities of Apple Support.

  If I understand your message that your keyboard Smart Pro iPad fails all the time. I recommend the steps described in the following article to help solve this type of problem:

  Use your Smart keyboard with iPad Pro

  Get help

  If your iPad Pro does not detect your Smart keyboard or you see an 'Accessory not supported' alert on your iPad Pro, make sure that there are no debris or plastic on the pins of the Smart connector on the keyboard or the Smart Connector on the iPad Pro. Also, try the following steps:

  1. Make sure your iPad Pro and Smart Keyboard are in a position to Type .
  2. Remove the Smart keyboard for your iPad Pro.
  3. Restart your iPad Pro.
  4. Reconnect the Smart keyboard.

  Best regards

• Help - Final Cut Pro does support the phone Sony Xperia Z5?

  I think to buy a phone Sony Xperia Z5.  However, it is supported by Final Cut Pro 10.2.3.  MaxBook Pro, OS X Yosemite, 10.10.5 version I'd be so

  grateful for the help on this!  Arwen

  You will probably get a quicker response by asking users to this phone. Sony has a system of support forum?

  It is not the phone, which is usually the problem, it is the codec the phone registers with it and then the file structure of the memory of the phone card that determine if FCPX can watch films from the phone. If you plan to spend a lot of time to make movies with your phone and edit them in a powerful and expensive tool like FCPX, do yourself a HUGE favor and just get an iPhone.

• 9.3.2 on iPad Pro can not update

  to message cannot update 9.3.2 like you are no longer connected to the Internet. (But I am)

  any suggestions?

  On ipad pro

  Note users that allows to remove the package downloaded in this situation. Go to settings > general > storage & use iCloud > storage management > you will see the downloaded 9.3, select which > delete.

  My 5s then will check for new software update. Note that it shows download & install instead of install only. Select that and it will ask for your password. Let it run until complete depending on your internet speed (mine took about 5 minutes and I didn't let the screen change). Once completed, he must check and installed automatically.