communication to printer no longer works

Similar Questions

• I have several documents waiting to print, but my printer no longer works. I got a new but is there a way to move the documents to the new?

  I have several documents waiting to print, but my printer no longer works. I got a new but is there a way to move the documents to the new?

  Hello

  What do you mean by "is there a way to move documents to the new?"

  What is the brand and model of your printer?

  Have you successfully installed the new printer?

  I wolud suggest you follow the method below and check if it helps.

  Try to follow the link below and check if it helps.

   
  Add or remove a printer
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
   
   
  Find and install printer drivers
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
   
   
  Print a test page
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page
   
   
  After you follow the steps in the link given above try to print the document in which you need.
   
   
   
  I hope this helps.

• OfficeJet Pro 8500 a: printer no longer works after reset wireless network

  OfficeJet Pro 8500 has, MacBook Pro, running the Mavericks.

  For 3 days, when we added a password and blocked our router wireless (modem ATT UVerse), our printer is "offline" print jobs queued, but do not print.  When I go and check it says "printer offline".  Or in the print queue, it is something like "looking for printer."

  He worked briefly when we found a power cord and plugged into the laptop, but will not work wireless, which he did before.    No changes except to repeat password for the network.

  I have the manual and you have turned off everything, then return in the order recommended (router, printer, then laptop).  Always offline.   Can someone please?   Thank you!

  Hello @LindaGrace,

  Welcome to the Forums of HP Support!

  I understand that since to add a password to your wireless router your HP Officejet Pro 8500 has e-All-in-One Printer not communicate wirelessly with your computer Mac OS X 10.9. I would like to help you today with this problem of wireless communication.

  Now, make a change to your network, as an addition to a password or change a password, translates into having to reconfigure your printer on the wireless network. At this point your printer is to be 'blocked' access to your network wireless because of the change you made. To correct this problem, you simply raise the Setup wireless for your printer to "say" the printer network name and password. Once the wireless installation runs successfully all will continue to work for you according to the normal.

  To run the Wireless Setup Wizard on your printer, please follow the steps below.

  1. On the touch screen of the printer, press the right arrow key () to display the second navigation screen.
  2. Press network () to open the network Menu.
  3. Touch Wireless.
  4. Press the Wireless Setup Wizard, and then press continue.
  5. Please wait while the printer is looking for the routers that are nearby. Appears in the menu Select Network (SSID) .
  6. Scroll the list of network names until you find the name of your network.
  7. Tap the name of your network.
  8. If you are prompted, enter the WEP or WPA key. This is the password for your wireless network. The password is case-sensitive.
  9. Wait for the printer to connect to the network

  -Source

  Once your printer is connected to your network again, please try to print. If printing still fails, you need to add the printer to your Mac because of the connection of network new printers. Please follow the steps below to add the printer to the Mac.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scanand then check if the name of your printer appears in the printer list.

  3. If your printer is already listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the minus sign (), and then delete the printer

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer

  5. click Add to add the printer to the list.

  Now that the printer is properly configured on your network and added to the Mac, please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Printer no longer works correctly. When I try to print nothing happens, the documents are waiting but the printer is offline.

  I reinstalled the printer three times. It works fine when I first install it, and then when I try to use it later it will not be printed. I ran the resolution of problems and there was a problem it could not fix. The last time that I used it, I was trying to print, nothing happened. About an hour or two later the printer came herself and documents printed on its own. I was not even at the computer. I had the printer installed more than a year without any problems. This just started happening. The only thing I can think who might have caused it comes from our modem died and we had to replace recently.

  I have a Toshiba Satellite L305-S5957 computer laptop, Windows 7, 32-bit and the printer is a MFC-495CW brothers. Any advice would be appreciated. Thank you.

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you are facing problems with the printer.

  Please follow the steps to solve the problem with the printer. If the problem is still not resolved, please uninstall and reinstall the printer.

  Method 1: Please follow the steps in the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: Remove and re - add the printer

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

• Since the installation of Firefox 4, I get this message "TypeError: components.classes['@ [cid] is undefined" when a window should open. Also saw print and print no longer work correctly.

  Since the installation of the latest version of Firefox, this message "TypeError: components.classes['@ [cid] is undefined" appears in a box when should open a new window. In addition, what you see in the Preview Print print, is not which prints.

  Recovering important data over an old profile

  https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

  Check and tell if its working.

• HP Photosmart Premium Fax e-Al: updated Windows 10 - printer no longer works correctly - not found solutions

  Windows 10 updated on my computer and I got a message to update my printer software... so I did through to tune and the HP Web site.  It does not work properly.  Ink is full, but it looks as if it was empty.  Another message said I might need extra assistance because it is Windows 10... but the site HP said that there are no solutions.  Please help!

  Hi Judi5,

  First try to clean the print head of the section of tools from the control panel of the printer. If once repeated cleaning still, you don't have no black but are sure you have ink you can try the following:

• WANT to 120 e - all - in - one: printer no longer works

  My 120 want gives a message: error in the printer, turn printer off and on again.

  The printer does not turn off, I have to unplug it and when I turn it back on it gives a blue screen with C4EBA7C1.

  Hi again,

  I'm sorry it doesn't work. I found another forum post regarding this issue.  You can try to uninstall and reinstall the ink cartridges.

  If it does not work. I'll see what I can find.

  Thank you!

• HP printer no longer works

  I have a HP (8500 all-in-one Deskjet) printer that is wireless. It worked well on 11/17, but since then has not worked from my laptop. Any suggestions?

  Hello

  ·        Which is exactly the problem that you are facing with the printer?

  ·        You did changes to the computer before the show?

  ·        What operating system is installed on your computer?

  I suggest you to run the diagnosis of HP to solve the problem:

  Find and fix common printer problems using HP Diagnostic tools

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c02073861

   You can also post your query on HP forum to get help:

  http://h30434.www3.HP.com/

• 8500 A910g: double sided printing no longer works on 8500 A910g printer using Mac

  Can someone help - double-sided printing stopped working on 8500 A910g printer using Mac?  I used to be able to toggle the menu layout on the printer, but now it is gray out and one side only the default

  Thank you, Rob

  Hi @robgit,

  Please check back with the results of your efforts.

  You may need to configure the automatic duplexer in the HP printing software.

  Discover sone of the procedure described in this document - printing on both sides of the paper (duplex) (OS X). Note: This model of printer supports automatic duplex printing. Scroll down to "How do I duplex automatic if my printer takes in charge?" in the FAQ section.

  Please let me know if it helps.

  Thank you!

• Since the last Microsoft updates, download HP printer no longer works.

  Original title: may not print on hp deskjet F4180 after shot, loading of the latest updates from microsoft.  Download driver hp several times.  Microsoft's response is did not recognize the hp logo.

  Can not print on Hp DESKJET F4180, after shot update microsoft, microsoft message is can varify LOGO.  Printer works when I print from my laptop, but not the destop.

  Hello

  1. What is the exact error message that you receive?
  2 have. the updates you installed?

  You can check the number of the update in the update history:

  1. click on Start, click all programsand then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click view update history.

  The following article might help: printer in Windows problems

• Printer no longer works

  My printer stoped working. The word doc displayed on the flashing printer imacs with the error mark "print/Genric class: waiting for the device.»

  Under settings in VMWare: printers is "enabled / default Match" and peripheral USB detects my printer Canon MX7600 Series and is checked.

  Please notify. Thank you!

  install Canon MX7600 printer drivers in the Virtual Machine Windows and check if that helps resolve the issue

• HP wireless printer no longer works when I READ swithcd to uverse.

  using a speedstream modem and a Linksys broadband router.

  Hello

  You need to reset the printer once again, as you did initially. Check with the help of HP, their online
  documentation and drivers and ask in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printer HP photosmart 8150 in Vista driver no longer works.

  My HP photosmart 8150 printer no longer works with Vista, on two different PC I own. I put it on XP and it works very well. How to get Microsoft to solve the problem of one of their updates or patches. It allows to work very well with SP2. the only available driver is built into Vista.

  Hi Everett,

  You can try to download Windows XP drivers and try to install it in compatibility and see if it helps.

  For more information see the links:

  Downloads of software & driver - HP Photosmart 8150 Photo printer

  Make older programs in this version of Windows

  Hope this information is useful.

• HP Photosmart Plus B209a-m: I have already upgraded to Windows 10 not knowing my printer wouldn't work - now what?

  My printer no longer works. He said: it is not connected. It's a WiFi printer but I actually plugged in with a USB cable and it still won't print.

  I have seen rhe messages saying to wait at least 6 months after the release of Windows 10 for set to level, but as not, HP users were warned before the release of Windows 10, I already updated.

  My son was also a computer HP laptop that had problems with WiFi after upgrade, but a simple reg edit mentioned on your forum fixed that.

  Is this what can I do to use my printer before January? I think that it is an unreasonable amount of the time-out; especially that HP has never notified users to wait.

  HP must have published something of a fix because I downloaded an update this morning and voila - my printer now works as a printer wrieless!

• Windows Update 8.1 - now my LaserJet P1005 printer will not work (AGAIN!)

  I have a HP laserjet P1005 printer, whose yeaterday was work happliy in window 8. I downloaded 8.1 last night and the printer no longer works!

  With the window of printer status open (through the control panal windows) the details of the document are displayed briefly when you click on the button print. Nothing happens at the end of the printer. Theres nothing wrong with the printer as I can use it on a laptop without problem.

  Driver Hp downloads link it "seem" a driver for the 8.1 but I think it's only version 8.0 wrongly labeled.

  I am sick to death with HP. It took them more than 1 year to untangle a driver for Windows 8, and it blocks as soon as Microsoft tweek their BONES.

  Does anyone have any ideas how this can be solved? HP seem to be abandoned as a fundamental value customer - I have not buy one of their products again.

  Hi again - finally got it works!

  I downloaded the software from the link... again. Still no joy

  Remove the printer from the computer devices. Then downloaded the link... again. The computer had the printer appears as a device.

  Then...

  I started again from scratch:

  Reinstalled the 'original' driver from the boot disk. (the driver from the link above must have still been present).

  Printer on stream.

  Very happy.