Como'll quando o erro 201ao driver o CC appears?

Similar Questions

• Como posso resolver o erro 201 that appears ao try download driver o UO creative cloud?

  Como posso resolver o erro 201 that appears ao try download driver o UO creative cloud?

  If you get the error code 201 again, see steps below:

  
  

  (A) disable anti-virus and firewall temporarily.

  (B)

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  6) click on the "Network settings" button once again, make sure that "automatically detect settings" is the only option selected, open the LAN Properties window.

  Then try to install the application cloud creative again.

  Still the same error? Let me know.

• ERRO para driver desinstalar OU a versão 7

  Pessoal nao estou access driver o VMWare 7 para a versão 7.1 e also I can not desinstalar para instalar again, I will try instalar o primeiro quando ele gay para desinstalar earlier, mas quando EU clico em Unistall appears o seguinte erro:

  Cannot find the bootstrap.lua file in the installation package, this could be due to corruption of package. Check that the package has been downloaded correctly.

  MAS depois esse erro some ele ainda continued mesmo sem desinstalar o anterior, e quando chega na parte instalar o novo appears outro erro:

  The MSI

  ' C:\Users\Rafael\AppData\Local\Temp\vmware_1306588696\vmware
  wordkstation.msi' failed.

  I tried apagar do registro mas it happened outro erro quando ele ja had fled try desinstalar:

  The MSI "failed.

  Ute but what to do have to to get driver desinstalar para instalar OU: a nova versão is alguem souber como resolver esse problema large ajuda seria. Obrigado.

  Hola, podes run el instalador the siguiente forma:

  VMware-workstation-full - 7.xx.xxxxx.exe / clean

  ESO if no ayuda podes visit el enlace http://kb.vmware.com/kb/1308 donde presenta UN cleaner installation

  Best wishes / Saludos

  Por don't favor no olvides calificar las responses you valiosos ayuda o were should

  Please, do not forget the points of call of the "useful" or "correct" answers

  ________________________________________
  Nicolas Solop

  VMware vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

  My Business Blog (Blog of the Wetcom group)

  Follow me on Twitter

  My Linkedin profile

  Join the Virtualizacion en Español group in LinkedIn

  

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• Satellite A350-CD/DVD drive does not appear

  My CD drive does not appear in my computer and no longer works

  Help, please!

  Thank you

  Hi denis,.

  It appears perhaps with yellow exclamation point in Device Manager? With the code 19 error? I ask this question because I founded this interesting article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/314060

  In addition, it would be interesting to know if the drive is seen in BIOS or not because in the worst case, need to replace the disk.

• Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS

  The CD/DVD drive does not appear in the window manager and I can't incert CD
  The BIOS displays "none" instead of "optical device".

  This means that the CD device is dead?

  Hey Micky,

  Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.

  Check also that it is not displayed in Device Manager and if it is remove before trying the above.

  Kind regards

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• CD/DVD drive does not appear in Windows 8

  My CD/DVD drive no longer appears in Windows Explorer in point 8.1 of Windows on my desktop HP Pavilion Slimline 400-034. The disc rotates during startup. I tried the troubleshooting of Microsoft Window 8 with no luck. I would try the HP troubleshooting which requires access BIOS when booting, but by pressing F10 at startup me does not BIOS but Windows load normally. Any suggestions to at least help me get the BIOS?

  Solved! No. thanks to HP. Even if I had never opened the file on my PC and make sure that the cable DVD could not be disconnected, I decided to look for. Much to my surprise, he has been disconnected - but not by me - by a HP technician. I remembered that I had to return the PC to HP to replace the power supply warranty in June 2014. Not only have they not reconnect the cable SATA DVD, they put the cable from the hard drive in the MB connector where the DVD cable was supposed to be. After trial and error and insert the DVD cable in the 3 open SATA connectors with no luck, and finally move the cable from the hard drive to another connector and put the cable DVD where the cable from the hard drive was, the DVD has been recognized by Windows and working correctly. Thanks to HP for the many hours I lost to try to correct their mistake.

• Computer infected with the virus. USB drives no longer appear in Windows Explorer.

  Original title: attack viruses, help...

  My friend has a computer that is running windows XP. She asked for help on what to do when several virus has infected his computer.

  I tried my best, but the virus has turned off. The Task Manager, msconfig are impossible to perform. the computer had a virus which is the reason why it continues to be infected. The last scan I made from a usb key which has been infected to leave the computer has revealed five different viruses and worms, each of them spread through usb drives. It's the worst case of infection, I had ever seen.  I tried to scan with the scanner but it did not work. The computer crashed, and when I turned it on things have become much worse. USB drives no longer appear in the Explorer, the computer reads no more and the old xp theme has disappeared, his running today on classic. Help me please.

  Please follow the steps below:

  On a friend or a member of the family computer, download the files installation and update Malwarebytes from the links below, copy them to a CD or a flash drive, then transfer the files on the problem machine and use them. If you cannot start the computer in 'normal' windows, try to install, update and running AFTER the computer scans are started in Mode safe... I use the sites below to download the installation file and the manual update:

  Once downloaded and before moving the machine to the problem, rename the Setup file "mbam - setup.exe" to something like "Gogetum.exe", and then copy the installation file and the update on a CD or a flash drive file... Transfer the file to the problem machine, install the "Gogetum.exe" file, and then run the update for the current program... After that, run a full system scan and delete everything it finds.

  Install Malwarebytes-download link (by clicking the links below will immediately start the download dialog window.)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  Then download the SuperAntispyware program and the manual update of the links below. After you run the Malwarebytes tool that above, if you still cannot download and install directly from the problem machine, download it to a friend or a family member computer as well. After installation and update SuperAntispyware, run a full system scan and delete everything it finds as well. As before, you may need to rename the Setup file for the Setup program. :

  SuperAntispyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  Update of the manual of SuperAntispyware

  http://www.SUPERAntiSpyware.com/definitions.html >

  ____________

  Power Eraser

  http://security.Symantec.com/nbrt/NPE.aspx?lcid=1033>

  Stinger

  http://www.McAfee.com/us/downloads/free-tools/how-to-use-Stinger.aspx>

  UTC/GMT is 05:20 Monday, April 2, 2012

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky

• My DVD drive does not appear in Windows Explorer

  This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD.  No DVD, CD or even disks with files stored on them.
  When I open windows Explorer, the drive from DVD (e) is not even more appear.  I was wondering how to fix this.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• My CD/DVD drive will not appear in the Device Manager, but present in the BIOS.

  DevCon didn't find it. It will not open even if I don't get to Device Manager and check for changes to the system. I deleted the registry entries upper and lower limit. Any other suggestions? For additional emphasis, he does not show even in the Manager of devices so I cannot restore or reinstall the drivers from there. It might also help that I use Vista Home Premium on a Compaq Presario F755us.

  Hello

  (1) does the BIOS see the main hard disk drive or a secondary hard drive?

  (2) remember to make changes to the computer before the show?

  You know may not be not that most systems are set to show only the splash screen. If you go into the BIOS Setup, it should show the disks that have been detected on two primary and secondary IDE channels.

  Note: the basic procedure to change the setting of the disk controller is to restart your computer and enter the system BIOS. The most common method is to press F2 to enter Setup, (another PC may use a different key). On the BIOS screen, find the setting that offers the AHCI, ATA or IDE and RAID. If the parameter is set to AHCI, change the setting to ATA. Restart the PC on the Windows installation disc

  Warning: Incorrect settings in the system BIOS can cause your PC function incorrectly. If you are not familiar with the configuration of the BIOS of the system, you must contact the PC manufacturer for assistance.

  Try the steps in the following article and check if it helps.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  You can also check the following items.

  CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista: http://support.Microsoft.com/kb/929461

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk: http://support.microsoft.com/kb/952951

• Why my DVD/CD drive is not appear at all?

  Why my DVD/CD drive is not appear at all? Not in my computer or Device Manager. When a disc is inserted, it turns on for a second or two and even goes for a couple more seconds. Help, please

  Hello

  1. you did it before the issue of any material changes or software?
  2. What is the brand and model of your system?

  Please follow the steps below and let us know if it helps.

  Step 1: Run the "Fixit" described in the article mentioned below.
  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Follow the steps in the below link.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs:
  http://support.Microsoft.com/kb/982116

  You can also check out the links below

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc:
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My cd drive does not appear in the my computer list. Œuvres to eject and it looks like it works.

  Under my computer, Miss me my CD card. I hear the CD player to make the noise, but it will not be displayed on the screen. So I can't read CD that I saved the material on. My Dell is only 3 years old. Maybe bad CD player already? Can you help me? Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.