Compact Sony Z3 camera will not focus

Similar Questions

• try to photograph a sunset through the tree branches, but the camera will not focus correctly

  I have a SX50HS, I'm trying to take a zoom of the sunset through trees, but the camera will be only focus on the branches... trying to get the Sun in short

  I agree with the manual focus to infinity. I think that you will have little problem get enough light in the camera for a fast shutter if you are shooting and counting of the Sun!

  Something will have to be badly exposed, because the Sun is so bright, and the hidden tree side is not. If you meter the Sun get beautiful orange, the tree will be a dark figure. Adjust the exposure for the sky a little left or right of the Sun, not the sun itself for best results. I'm not used to the Powershot cameras, f/5 might work, but on a DSLR, you would probably like an opening narrower, like f/8 or f/11 or even higher.

  This is probably the way to go rather than dosage for the tree and saw the sky blown completely out., but you can try both ways for fun.

  Good luck!

• When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

  When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

  I would say "try and do a restore as new iPhone" like everyone else but I'm having a similar problem and nothing works! I've restored all the possible ways and nothing. I got my screen replaced and I still have the same home button but my phone updated with error 53 (makes the phone unusable) but the camera did work before the update. and Apple has released iOS 9.1.2 (13D 20) to correct the error 53 (mainly for other reasons) but when I go to use the camera, it is only black! If someone could help 'discovered' and I would be great!

• SONY DVP-FX780 will not play on TV

  SONY DVP-FX780 will not play on TV, even when I unplug the device and the TV from the wall.

  Thank you

  Scott

  Make sure that you select entry appropriate to the TV. Also, check if the connection is closed and secure.

  Try to use different Audio/video cable connection and check if there is a photo. Also, try to connect the reader with different A / V port of TV (if available).

  NOTE: Before connecting, turn off the drive and the equipment to be connected, then unplug the wall outlets.

  If my post answered your question, please mark it as "acceptable Solution".

• Lens barrel will not focus?

  Hi all

  I have an a6000 and recently bought a Canon EF 50mm f1.8 STM lens and an adapter Fotasy EOS - NEX.

  Everything fits together ok, but the ring on the lens will not work (it's brand new)

  is there some settings I need to adjust to get this working correctly?

  (already provided without active goal still does not seem to work)

  Any help would be greatly appreciated!

  The focus ring rotates when the lens is NOT attached to the adapter?

  ... when it is attached to the map is NOT attached to the camera?

• After IOS 10.0.2, camera will not close

  Just did the upgrade to the new IOS, and now everytime I open my phone or my pad, the camera is open and will not close. Reboots do not help.

  Hello. Can you explain more? You open the smart cover or click on the Home button and immediately see the camera? You should see the lock with a message screen to press home to open. The lock screen is now configured with the page today (widgets) on the left and on the right camera, so you can drag to get access without having to open the iPad. If you enter the camera, by error, by clicking on home leaves you.

• Excite - AT10PE - camera can not focus the image correctly

  When you use the camera, sometimes that can put the image incorrectly.
  You have it too?

  My screen AT10 has a slightly reddish. I used the 'filter your screen', but it is not fair. Addressed to someone?

  After that update to version 4.3 takes the focus is still wrong - fixfocus - infinite - cannot be set. Missing manual calibration. When I put infinity, should be on the horizon. But it's not. It's good to see the apk mobilwebcam or KennyCamera.

  In addition, the camera does not work with the exhibition.

  Oh, another discovery. When the camera lens lend a lens with a focal length of 200 mm, so the focus to infinity corrected at once:-o. As the lens on the tablet had the focus more than necessary!

• Camera will not take pictures!

  My camera is not let me take pictures at all, when I press the capture button, it just says: ' picture failed. I think that it because of the retro camera app that I downloaded just before the 2.1 update. I can put the camera app retro as my default camera app, but I don't know how to reverse the trend. I deleted the Retro Cam application, but I can still take pictures with the regular camera on my phone app. Someone at - he a starter or a solution to this problem?, your answer would be greatly appreciated. Thank you, Melvin.

  thestrokes89 wrote:
  My camera is not let me take pictures at all, when I press the capture button, it just says: ' picture failed. I think that it because of the retro camera app that I downloaded just before the 2.1 update. I can put the camera app retro as my default camera app, but I don't know how to reverse the trend. I deleted the Retro Cam application, but I can still take pictures with the regular camera on my phone app. Someone at - he a starter or a solution to this problem?, your answer would be greatly appreciated. Thank you, Melvin.
  

  After you remove the app do you turn off the phone and power then turn it back on. After back what happens. We have seen that the apps are still not working after upgrade and reset it will probably set but let just first try the camera application.

• Sony PMB installer will not install

  I have a Sony VGN-FW275J... I'm trying to load the installer of PMB to a HDR-XR150. I tried over and over and over again and it will not be installed. He manages at the end of the installation each time, and then told me that he "... could not open key: unknown/components/DA (very long series of numbers, letters) check that you have sufficient access to that key or contact your support team."

  I'm the only one who uses my personal computer... period. Why it tells me I do not have a sufficient and safe especially... why in the world will not load software Sony Sony computer? It must be one of the stupidest things I ever experienced.

  Thank you for your post and welcome to the forum.

  Your description of the error appears to be a permissions issue - the installation tries to access a part of the system registry, but can not. After a reboot, try to run the installation in administrator mode - instead of double-click Setup, right click the icon and select "Run as Administrator" from the menu.

• hard drive replaced a moment my performed web cam will not work

  I have a dell m5030 I lost my o/s I had the hard drive replaced a moment made my web cam does not work WHY?

  willmason1953,

  When you have installed the operating system, have you installed the utility of the portable system and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Rick

• Sony MP3 player will not sync on PC

  SONY MP3 PLAYER

  MY MP3 SONY READER WILL NOT SYNC TO MY COMPUTER

  Hello

  Please do not type in capital letters as it is difficult to read and considered to be shouting.

  ------------------------------------------------------------------------------------------------------

  Here's to an MP3 player and not all apply to an iPod (if an iPod please let us know.)

  Set the MP3 MTP Mode for synchronization of WMP11/12 - mode MSC to treat the MP3 as a reader.

  ----------------------------------------------------------------------------

  If necessary: (Vista references also apply to Windows 7)

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed
  in this case. Mine was h: I added a device that took H: and the player stopped. So I put
  Back to H: and the other device to J: and everything worked again. If necessary start - type in the search box->
  Disk management is top - right click it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and
  delete files and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often
  only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure in XP, Windows 7 is the same, except that we need to clear the specific
  devices if it is present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as
  Although all USB devices that you previously used. Run Options and check the 1st three choices to
  see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  -------------------------------------------------------------------

  If the above does not work (and it should be considered the preparatory work).

  This works for any MP3 player when the USB stack is not corrupted:

  1 player to delete and restart computer - switch to MTP mode on your MP3 player

  Regardless of what brand of MP3 you have

  1. check this Just In Case

  http://KB.SanDisk.com/app/answers/detail/A_ID/42/kW/E200 * / page/2/r_id/101834

  2. does not present (web page as reference)

  http://KB.SanDisk.com/app/answers/detail/A_ID/192/related/1/kW/E200 * / page/2/r_id/101834

  In XP: Start - RUN - CMD

  In Vista/Windows 7: (Do this way!)
  
  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  Copy and paste this command into windows XP or Vista/Windows 7 CMD - press enter

  NET local service localgroup administrators / add

  3. then follow:

  http://KB.SanDisk.com/app/answers/detail/A_ID/139/related/1/kW/E200 * / page/2/r_id/101834

  I hope that your MP3 now works.

  -------------------------------------------------------------------

  Only if necessary:

  Try a system restore before what happened:

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Camera will not take photos or make videos.

  I use the LX-7000 LifeCam, and it will not just take pictures or start recording a video. For photos of troubleshooting specific;

  I can't capture photos, or I can't see the video.

  Check the following:

  • Audio and video settings are properly adjusted. For more information, see audio and video settings.
  • Closed all other programs that may be using the LifeCam. (You don't have to close your instant messaging for the LifeCam program work.)
  • Your LifeCam lens is not covered or blocked and that the LifeCam has enough lighting.
  • Try to disconnect and reconnect the LifeCam.
  • Try to disconnect other unused USB devices.
  • Try using a different USB port on the computer. Connect to a USB 2.0 port, if you can.
  • If you use a USB hub, try unplugging the hub and rather the LifeCam directly on your computer.

  -I just checked and made sure everything on that list is done but it still won't let me click the photo icon, which also indicates that I have to click to take a picture. What could be wrong?

  Hi GabeisHungry,

  You can try the following steps and check if it helps.

  Uninstall and reinstall the drivers for the life Cam.

  1. click on Start

  2 type devmgmt.msc in start search and press ENTER.

  3. in Device Manager , look for the device for life cam right click top and select the Uninstalloption.

  4. restart the computer, the life cam plug-in and verification.

  You can try to update the latest drivers by following the link:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=68c-00001&OS=Win7_3264&lang=en

  You can also check out the following link and try the suggested steps:

  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software

  http://support.Microsoft.com/kb/933311

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 3D object layer on camera will not appear on the record please help!

  Guys help me please... When I visited the camera does not appear on the video...

  I have created a camera, and then link it to a null object, then applied a small agitation to null, and turn on 3d on the objects I want to have this effect, in the preview is perfect, the effect flowing I want,.

  but when I returned the 3d object of layers I want to that effect is not on the video... while everything is perfect on preview... what could be?

  Thank you

  Without accurate information on the configuration of your person can tell you a lot. Starting from the expression was not evaluated correctly using a window of bad camera, it could be anything. You need to be much more accurate and provide appropriate information as parameters, rendering information system what version of AE, model parameters, and so forth. Screenshots of the timeline window and comp will help a lot.

  Mylenium

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• BlackBerry Smartphones camera does not focus at point-blank range

  I just got the bold 9900 and the camra does not focus on the fine print is it a way to solve this problem?

  Oh that sucks BIG time oh well * beep * happens other then this problem, it's a great phone thanks for your help with my problem