Lens barrel will not focus?

Similar Questions

• Compact Sony Z3 camera will not focus

  I had a Sony Z3 Compact for several months now and at first was very satisfied with the quality and sharpness of the images sound produces camera.  However, I recently noticed that the camera sometimes refuse to focus.  The center of the image seems rather distort back and forward but not to focus.

  I tried to look on the support and community forums to get suggestions on how to do, but I got a lot of help.

  I discovered that sometimes in pressing the lens or tapping gently on the area of the case with the lens will solve the problem temporarily.  For these reasons, I suspect something has come loose or moved in the focusing system.  Is it possible on this model?

  Further, I tried several alternative camera apps to see if they all meet the same problem.  In addition to the stock camera app, I tried; Google camera, A better camera, open camera and Instagram.  All the same problem of the development of experience.  The only thing that seems to bring the image to the home for all is a gentle tap or the pressure applied on the lens (one or the other).

  I managed to use installation of the record screen to capture the camera not developed:
  - https://www.youtube.com/watch?v=YD5DGF3gWJ4
  - https://www.youtube.com/watch?v=DUfRTdZfAZg
  The second video shows better the fish-eye lens effect I do not see where it does not seem to focus.

  I do more to permanently fix the problem with the update?

  It's a question that has been seen with other phones and could be repaired if I go back to the phone to a service center?

  Other people experience a problem like that?

  I suggest that you try to repair the phone using PC Companionsoftware, to rule out the possibility of software problems.

  Before the repair of your device, you can back up your information first. See this topic for more information on how to.
  How to backup?

  If the question must remain, I think that this must be examined and fixed to a repair center. For more information on how to submit your phone for repair and where, contact your local support team.

• 2014 iphone 6 and camera back will not focus

  Back the camera on my iphone 6 more suddenly stopped to focus properly. The front camera is absolutely perfect, but the back can't take a decent picture more. I tried to tap on the screen to force him to focus and also a complete reset, but nothing has worked. The lens itself seems well.

  Any help or advice would be much appreciated.  Thank you very much.

  Hello and welcome to the community!

  Apple offers a free replacement for iPhone defective 6 more iSight cameras. Check if your device qualifies for repair here:

  https://www.Apple.com/support/iphone6plus-isightcamera/

  I hope this will help you!

• try to photograph a sunset through the tree branches, but the camera will not focus correctly

  I have a SX50HS, I'm trying to take a zoom of the sunset through trees, but the camera will be only focus on the branches... trying to get the Sun in short

  I agree with the manual focus to infinity. I think that you will have little problem get enough light in the camera for a fast shutter if you are shooting and counting of the Sun!

  Something will have to be badly exposed, because the Sun is so bright, and the hidden tree side is not. If you meter the Sun get beautiful orange, the tree will be a dark figure. Adjust the exposure for the sky a little left or right of the Sun, not the sun itself for best results. I'm not used to the Powershot cameras, f/5 might work, but on a DSLR, you would probably like an opening narrower, like f/8 or f/11 or even higher.

  This is probably the way to go rather than dosage for the tree and saw the sky blown completely out., but you can try both ways for fun.

  Good luck!

• Add a slide show using apDivs - will not focus / clashes with the images.

  Hey guys,.

  I'll be as fast and accurate as possible. I am new to Dreamweaver and I'm having a few problems in my attempts to create a Web site simple portfolio.

  I am trying to add in a base image slideshow using apDivs. I had a look online and found a few fantastic JQuery slideshows, and I ended up adapting it for use on my site;

  http://www.queness.com/post/923/create-a-simple-infinite-carousel-with-jQuery

  I have pictures in the base of my site and I wanted to add the slideshow above them (and the same thing for a couple of YouTube embeded videos too.) I added in an apDiv and placed the code for the slide show inside. This created a layer that goes on top of the image, and I am able to put the code for the slide show into it without any problems (providing the position of the apDiv has the Absolute value).

  {#apDiv1}
  position: absolute;
  top: 419px;
  left: 400px;
  Width: 555px;
  height: 480px;
  z-index: 1;
  }

  The problem I have is lining up the cursed thing. Of course, defining the apDiv absolute positioning is a bad idea, because while it was going on well in a resolution, it is not in another. I tried to change the position of the apDiv for relative and then adding changes to my code;

  {#apDiv1}
  position: relative;

  Width: 555px;
  height: 480px;

  left margin: auto;
  margin-right: auto;
  z-index: 1;
  }

  This centers my slideshow (which is beautiful), but is no longer layers on the top of the image (since it seems to work only when the position is set to absolute.) Instead, the slide show appears below the image rather than on top.

  Is there a way possible, I can keep the apDiv (which contains the slide show) centered while standing on the top of the image? As I said, it will layer on very well when the absolute value, but won't focus. When the relative value, it will center but not layer on top. It is one or the other, and I'm pulling my hair out top at the moment.

  If anyone can give any help, please Please let me know. I've included a Notepad document, including all of my code on the page (including my wacky comments) to the address below, if it helps in any way;

  http://www.box.NET/shared/5nufqc78jbg0mfkb00n5

  Do #container position: relative.  Do Divap1 position: absolute and adjust high/left to place values in the container you want.

  (You realize one) your page is too wide, and b) there is no content on the page, right?

• HP 6600 ink transport will not focus

  6600 HP printer all in one, the transport is not centered when gate opens.

  I understand that you have a carriage jam on HP 6600.

  I have provided a url to resolve the problem.

  http://support.HP.com/us-en/document/c03079130

• I use media queries and div will not focus on the desktop version

  Hello

  I'm building a site for the first time using questions from the media. My problem is that I can't get the header div (#layoutDiv1) in the centre on the desktop version.

  I pasted my code below, am I missing something?

  Any help would be great.

  Thank you, Alex.

  / * Mobile layout: 480px and below. */

  {.gridContainer}

  left margin: auto;

  margin-right: auto;

  Width: 100%;

  color: #FFF;

  background-color: #000;

  }

  {#LayoutDiv1}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 90%;

  display: block;

  padding-top: 20px;

  padding-left: 20px;

  padding-right: 20px;

  padding-bottom: 20px;

  }

  / * Tablet Layout: 481px to 768px. Inherits the styles of: Mobile layout. */

  @media only screen and (min-width: 481px) {}

  {.gridContainer}

  Width: 100%;

  }

  {#LayoutDiv1}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 90%;

  display: block;

  padding-top: 20px;

  padding-left: 20px;

  padding-right: 20px;

  padding-bottom: 20px;

  }

  }

  / * Office Layout: 769px to a maximum of 1232px.  Inherits the styles of: Mobile and tablet. */

  @media only screen and (min-width: 769px) {}

  {.gridContainer}

  Width: 100%;

  text-align: left;

  }

  {#LayoutDiv1}

  Width: 1000px;

  padding: 20px;

  margin-right: auto;

  left margin: auto;

  }

  }

  Because you don't have a max-width to constrain the delicate design, attributes of the Tablet and phone are also then applied on the desk, because they are true.  Have you tried to set a max or clear setting width and float to none in the CSS Office?

• Focus problems with Rebel T3i. It will not be in manual or auto focus point. It's not about camera lens

  My camera will not focus. Not only the autofocus. I can't he focus even if I put manual focus.

  The image is still blurry.

  First I thought it was the lens I had but I tried with several, and the problem is the same.

  Any ideas what could be the problem?

  Thank you

  Have you checked the viewfinder diopter?  , It will be not clear even on the manual focus, and it happens with all your lenses makes me think that it is possible that the dial tiny bit right there on the eyepiece was implemented accidental market. The dial control what you see in the viewfinder, not something to do with the focus lens. The diopter is adjustable so that those who need glasses can see things through the viewfinder.  If everything still seems blurry even when the camera thinks he's focused it is generally just that little diopter got hit accidentally.

  IFIT is not this, then perhaps your screen focus got shifted.

• camera not focus or take photos

  I had my camera for 2 years and had no problems.  Now it will not focus correctly when you use the LCD screen.  He also says that it is busy when I try to take a picture. Help! It will take pictures when I use the viewfinder.

  If the unit is in "One Shot" mode (it is by default, mode), then it also uses what is called the "Update priority".  This means that there _must_ confirm that he was able to reach the front focus it takes a picture.

  The other mode is called "AI Servo" who uses what is called the "release priority".  In this mode, the camera _will_ take a photo when you press the shutter button completely even if she was not able to focus (usually, this is not desired behavior, unless you know how to watch so he could confirm the update, but the sports photographers like this mode.)

  There is a mode of development called 'AI Focus' - it is not really a new way... that really means he'll try to evalutate if a subject is moving or not and then try to use the mode "One Shot" mode or "AI Servo" depending on whether the subject was stationary or moving.

  ALSO... the camera will only attempt to auto-focus is the switch AF/MF on your lens is in the position of the AF (autofocus).  If you switch to MF (focus manual), then the camera must take a picture immediately (even if she is not centered).

  Anyway... the camera can struggle to focus the light is low or if the topic lack of contrast (for example if you just point the camera on a clear blue sky, then he will really struggle focus - even a starry sky is a problem because the individual stars are simply not big enough and bright enough.)

  If your camera is having a problem AND you take a picture in low light or a topic which has no contrast (or both) then this isn't really a problem with the camera (even a perfect work machine would have problems in these situations).

  It could be useful that we could eliminate the possibility that the reason that the unit is struggling to focus is due to inadequate lighting.

  Can you take the camera one day sunny nice birght and try to focus on a subject well lit?  This would allow you to confirm or rule out the possibility that lighting is to blame.

  It is also possible that the lens is a problem.  What lens you use and you have more than one goal?

  If you have the standard "kit" lens that usually comes with a T3, it should be a lens EF-S 18-55mm f/3.5-5.6 IS II.  This lens is _not_ allow "full time" in manual focus.  This means that you should not try to focus of the lens, if the lens is in mode "AF".  Put the lens mode "MF".  Turn the ring on the front of the lens all the way one way (any way) until you have executed the update completely 'out' or ' bottom'.   Then switch the focus mode switch to "AF".  Pointing the camera at a subject and try to focus.  You * must * hear engines focus on the goal, as he tries to concentrate.  If you do not hear the engines of development, it could indicate a problem with the lens.   If, by chance, you get to possess either a lens 'USM' or the new 'STM' goal, these lenses have development engines that are extremely silent (espeically the 'STM' lenses) so you would have probably not heard the goal point.  But the version 'STM' of the lens EF-S 18-55mm lens is extremely new and as it seems that your unit is a few years old, you probably do not have the "VTS" version

  Usually if the camera or lens has malfunctioned, then the camera would display an error code.  It doesn't seem like it displays a code, which makes me suspect this is not the same as take a picture because it cannot lock the focus (but the focus mechanism correctly tries to focus).   That is why I am wonderng if the reason why it does not lock focus is due to insufficient light or due to an issue with insufficient contrast.

• Macro lens EOS T3i not turn or focus

  On my Canon EOS Rebel T3i, when I place the macro on the camera lens, it does not or focus (manually or automatically, if it is in auto or manual focus), almost like it is stuck. The zoom for the functions of this camera lens, normally when it is attached so I think it's a problem with the lens itself. Is there anything else I can try or is broken for good lens?

  Take a look at the solution in the following thread posted by Canon product Expert Julius.

  http://community.USA.Canon.com/T5/lenses/autofocus-not-working-18-55mm-lens/m-p/138114#U138114

  [EDIT]  This isn't a target macro, BTW.  The word 'macro' appears on the lens body to tell you what the MFD, minimum Distance of focus, or macro distance, is for this particular goal.

• Lens EF-S 18-55mm 1: 3. 5 - 5.6 IS STM will not mount on camera 6 d

  Lens EF-S 18-55mm 1: 3. 5 - 5.6 lens of the STM will not go up on camera 6 d.

  You must understand the relationship between your 18-55 lens & how it acts on the bodies of harvest that it was designed to adapt. It has a smaller path of light because the harvest have a small sensor & gives a similar ratio of the image of what a lens 1.6 times more time on a full body frame. It is not a full frame 18-55, but if there was it would be 18 X 1.6, which is 28 mm to 55 X 1.6 = 88 mm so you would look to about a 28-90 lens, BUT it will be physically larger & heavier.

  It also helps explain it a little.

  http://forums.USA.Canon.com/T5/lenses/using-a-lens-designed-for-crop-bodies-on-full-frame-samples/m-...

• Will not take picture

  When I press the button to take a picture it THAT ONLY turns the image stabilizer does not take a picture. It is half of the battery... That's an EOS Rebel XS thanks all awnsers.

  A camera will not have the photo if it is the development of "One Shot" and the auto-focus mode / manufal switch in focus on the objective (labeled "AF/MF") is in the position of the auto focus AND the camera fails to lock focus.

  A camera may not be able to lock wear light is low or if the subject has very low contrast (a plain featureless subject - for example, if you point your camera to the top in a clear blue sky in a day without clouds - which would not focus, even if there is enough light.)

  But another reason, that a camera may fail during the update is if the focusing on the lens motor is defective.

  BUT... If you take the lens 'manual' mode (AF/MF switch the switch on the position of MF) - or - if you change the mode of development of "AI Servo" in the camera, THEN a camera could take the picture as soon as you press the shutter completely and she will let you know if he was able to focus or not.

  This means that we can solve a problem... but reveal another.  Usually go to the update manufal or focus mode to the point of "AI Servo" solves the problem of the aircraft refusing to take the picture... but then, you're stuck with a camera that used autofocus.

  Especially when the lens cannot autofocus, if there is enough light and the subject has a lot of contrast (it is not flat), this means that there is a problem with the focus on the lens engine.  You could test that in trying a different objective.

• Optical drive will not read anything else professional films

  So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.

  I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.

  I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.

  Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.

  I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...

  If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?

  Good luck

  JB

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• Satellite Pro L100 - DVD will not turn even upward

  My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.

  When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
  Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?

  I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
  If this is the case why Windows XP does not recognize a DVD - RW?

  If someone sees something I missed please?

  Hey,.

  Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.

  The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.

  Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)