Compaq 15-s108na: delay

Similar Questions

• Performance of Compaq mismatch

  Hi I have a compaq 15-s108na and about 3 weeks ago I had to send for repair because the disc hard faled reading and writing test. before the laptop worked well, but since I got back and set windows back up and restore my files I've run into performance problems for example takes 2 minutes to go from the start screen to the screen to login to the laptop and whenever I just watched a video that I have to watch in 480 p if the youtube video is jerky and very bad even in 480 p is bad, I installed the sims 4 and he told me your material isn't meet the requirements which is strange because before the laptop was repaired almost well done sims. I've updated all the driver I refreshed windows to remove the bloatware of another plant that I'm out of ideas anyone can help.

  Watson059 wrote:
  

  Hi I have a compaq 15-s108na and about 3 weeks ago I had to send for repair because the disc hard faled reading and writing test. before the laptop worked well, but since I got back and set windows back up and restore my files I've run into performance problems for example takes 2 minutes to go from the start screen to the screen to login to the laptop and whenever I just watched a video that I have to watch in 480 p if the youtube video is jerky and very bad even in 480 p is bad, I installed the sims 4 and he told me your material isn't meet the requirements which is strange because before the laptop was repaired almost well done sims. I've updated all the driver I refreshed windows to remove the bloatware of another plant that I'm out of ideas anyone can help.

  Contact the place fixed it on the problem. Sim4 also require devote chart and your system does not - that's why it will not load. You have iNtel HD and it will not work.

• 15 - s108na: portable computer Compaq

  Hi I have updated BOF
  Windows 8 to 10 Windows and my computer laptop use you cam face login for security.

  Since the upgrade to Windows 10 the face cam login you stopped working so I can't access my lap top.

  I'm used to be able to get around this by entering a password because the upgrade of Windows 10 does not give me this option.

  What can I do to avoid this?

  Concerning

  Andy

  Andylowde wrote:
  Hi I have updated BOF
  Windows 8 to 10 Windows and my computer laptop use you cam face login for security.

  Since the upgrade to Windows 10 the face cam login you stopped working so I can't access my lap top.

  I'm used to be able to get around this by entering a password because the upgrade of Windows 10 does not give me this option.

  What can I do to avoid this?

  Concerning

  Andy

  Since it is an isse window you should post to a forum or contact Microsoft Windows supports for other aid options of Windows login.

• HP Compaq nx6310 - Windows 7 32 bit - power-processor-core of event ID 37

  Hello everyone,
  
  I just installed Windows 7 Ultimate 32 bit on my HP Compaq nx6310 computer and whenever the system starts up, I get 2 warnings in Event Viewer

  • The speed of the CPU 0 in group 0 is restricted by the system firmware. The processor is in this state of reduced performance for 71 seconds since the last report.
  • The speed of the processor 1 group 0 is restricted by the system firmware. The processor is in this state of reduced performance for 71 seconds since the last report.

  That also seems to happen on Windows Vista Ultimate 32-bit Edition SP1, but it is not on my Windows XP system. The problem will not occur if the system (Windows Vista or Windows 7) has been started in safe mode. Is there something I can do to fix this?

  Here are the specifications of my computer:

  • Processor: Intel Centrino Duo: Genuine Intel(r) CPU T2300 at 1.66 GHz (Dual Core)
  • Motherboard: Hewlett-Packard 30AA (KBC Version 58,13)
  • BIOS: Hewlett-Packard 68YDU worm F.0E (2008-02-21)
  • Memory: 1024 (2 x 512) MB DDR2
  • Graphics card: 256 MB Mobile Intel(r) 945 Express Chipset Family (Microsoft Corporation - WDDM 1.0) [400 Mhz]
  • HARD drive: 150 GB TOSHIBA MK1652GSX ATA Device
  • Model: HP Compaq nx6310

  Thank you
  Any help will be greatly appreciated.

  Thank you very much for your reply and I apologise for the delay. I tried to understand the problem, then I discovered that the maximum frequency of the processor is stuck at 59% via the resource monitor, I guess that's why I got a warning in the event log. I tried switching without result power plans. I think it's something to do with saving technology (even though I'm on AC) of energy, but I can't control how my processor or how power is saved via the BIOS (I don't have the options for this)

  However, Safe Mode, I get 100% maximum frequency.

  EDIT: I managed to understand it with the help of CPUID! My CPU clock is automatically reduced when I walked into Windows 7 in Normal Mode (I guess it's something to do with the processor), so I downloaded ThrottleStop and restored the multiplier to 10, where now is 99% maximum frequency and the computer is super fast! Thank you very much for your kind and helpful suggestions, I hope this helps anyone having the same trouble.

  EDIT: The problem was EIST (Enhanced Intel Speedstep Technology), who strangled the CPU while it was hot. I disabled it remove its driver from the OS and then I was able to get 100% maximum frequency.

• Compaq Presario CQ60-210el: cpu compatibility

  Hello. I am looking for a new processor for my Compaq Presario CQ60-210el, but I'm totally confused. I'm looking for the best processor that my computer support, can you help me?

  (this is the report of cpu - z, maybe that this can help)

  Chipset
  -------------------------------------------------------------------------

  Northbridge Intel GL40 Rev 07
  Southbridge Intel 82801IM (ICH9-M) Rev. 03
  Memory type DDR2
  Memory size 4 GB
  Double channels (symmetrical)
  Frequency memory 332,5 MHz (3:5)
  Latency CASE # (CL) 5.0
  RAS # for CASE # delay (tRCD) 5
  RAS # Precharge (tRP) 5
  Cycle Time (tRAS) 15
  Host Bridge 0x2A40

  Memory SPD
  -------------------------------------------------------------------------

  DIMM # 1
  SMBus address 0 x 50
  Memory type DDR2
  Format of SO-DIMM
  Manufacturer (ID) A-Data Technology (7F7F7F7FCB0000000000)
  Size 2048 MB
  Bandwidth Max PC2-6400 (400 MHz)
  DOVF1B163BE part number
  Manufacturing date week 42/year 08
  Number of banks 2
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  AMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  DIMM # 2
  SMBus address 0 x 52
  Memory type DDR2
  Format of SO-DIMM
  Manufacturer (ID) A-Data Technology (7F7F7F7FCB0000000000)
  Size 2048 MB
  Bandwidth Max PC2-6400 (400 MHz)
  DOVF1B163BE part number
  Manufacturing date week 42/year 08
  Number of banks 2
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  AMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  Monitoring
  -------------------------------------------------------------------------

  Model of motherboard 3612 (0x000000CC - 0x000021F0)

  LPCIO
  -------------------------------------------------------------------------

  DMI BIOS
  vendor Hewlett-Packard
  version F.32
  day 11-20-2008
  ROM size 2048 KB

  System DMI information
  Manufacturer Hewlett-Packard
  PC product laptop Compaq Presario CQ60
  version F.32
  series 2CE850DYPD
  UUID {604396EE-DBD0-DD11-85F2-92ECD7B3AEFF}
  SKU NJ840EA #ABZ
  family 103C_5335KV

  DMI Baseboard
  seller Wistron
  model 3612
  revision 09.48
  series 2CE850DYPD

  DMI system box
  Manufacturer Wistron
  chassis type Notebook
  chassis serial number of chassis

  -hope this will be useful-

  There isn't any processor update for you that will be worth the effort. The one you have is 2 GHz and the T3400 2.16.

• Games fps will be declining and the delay of the computer

  Hey I'm running windows 7 Home premium on my Compaq Presario cq5320f and I have 2 GB of ddr3 ram and my processor is AMD Athlon II x 2 240 and my previous diet was 250 w, I upgraded to 600 w and I also put a GPU inside the PNY GTX 750 so my problem was that I was getting fps dips I don't know if it's the RAM the cause because there is only 2 GB I have play the game like bf3 on med to ultra setting same thing happens to bf4 and I that if she could possibly be bottle neck of my GPU or if it's a ram issue because I am running windows 7 64 bit so I need help on this, don't know if I should move the ram to 4 GB 8 GB because this Compaq Presario has only 2 slots of ram ddr3.

  "so I'll get the 4 GB of fast ddr3 ram I can get."

  Get the same speed than what you already have. There are several reasons for this, but

  first of all, is controller of memory your motherboard (or possibly the CPU. I don't know if your cpu

  is new enough to have built the memory controller) can not handle any speed RAM knock you out in it.

  If you try to force a speed more than one level more than the card motherboard BIOS default

  (maybe not even that) you will most likely get BSOD (higher speeds may require system overclocking, and you really want to go with this machine).

  Second you will not see difference in the real world, even if the machine can use a higher speed.

  "try to run windows and the game both at the same time.

  Yes, an inevitable scenario, but do not avoid multi-tasking (narrow browsers, etc.) and have too many things running in the background - eg. Disable unnecessary programs from Starup via.

  System configuration (msconfig > startup).

  " " and really the game works well at 50 fps... and ends game like 10 FPS down every 10 seconds until '

  A 10 fps drop should not be serious. However, doping below 25 fps would cause serious delay.
  I can't offer any suggestions as to what your system RAM may work on stably. Support Compaq can help.

  Or go with a new kit of 4 GB of the same brand, speed, latency, and voltage as you have already.

  .

• How can I delay send SMS in IOS10.0.2?

  How can I delay the sending of SMS in IOS 10.0.2?

  Don't hit the Send button until you are ready to send it...

• Possible to delay the login items?

  Implementation of Adobe to open the connection software has created more problems than it is worth. I use Photoshop, Bridge, first and every day hearing as part of the same project, all related. I thought I would put them in place to open the connection, to save time.

  However, the location of the Cache for all download and also the folder for my Google Backup Drive, on an external drive, and if it is not present when the software tries to open, things go haywire.

  Is it possible to delay the opening of the connection points, by, say, 10 seconds?

  No, it's on or off only, there may be a 3rd party app that can do it, but you will need to check the app store.

• very long delay before printing

  My MacBook Pro is around the age of 18 months. It is updated at El Capitan.

  Maybe a week or two ago, my printer stopped printing normally. I bought the printer at the same time as the Mac. It's a HP Officejet 8610. It is connected with a time capsule wireless newish.

  When I select print, a normal icon on the dock. Opening it displays a message to printer, printer not connected. I fought with him for half an hour or more, then give up in disgust and head to do other things. When I return to my office, there is the impression.

  I deleted the printer in system preferences, then reinstalled. I have reset the airport utility. I turned the printer on and outside.

  I believe the delay between the choice of printing and when the printer starts his work about half an hour.

  Open system preferences > printers and Scanners and then select the print tab then check or right on the printer on the left then click: reset the printing system

  Then try to print.

• There is Airfoil and Airport Express, latency/delay time?

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  But the audio output should be "real time." in other words, no delay or latency at all. Both are in the same room!

  I use notation software (Sibelius) and need to hear what I write immediately. Unlike streaming where I think there is an acceptable delay (2 seconds?) for the buffering?

  Is this possible please?

  If it isn't with AirFoil, any advice on how welcome :-)

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  With AirPlay (or Bluetooth), there will always be a form of delay or latency with streaming audio.

  In this scenario, an audio stream (on AirPlay) will go first to your iMac to AirPort Extreme and AirPort Express Terminal.

  To help understand why there will be delays, let's look at high-level "behind the scenes" about how works AirPlay:

  For the AirPort Express (AX), audio input is provided mainly by iTunes. Of course, it can also get feedback from other sources as you know, as of Rogue Amoeba's Airfoil.

  For streaming, iTunes or wing does most of the work. What is app reads audio content standard (AAC, MP3, audio books, Internet music streams, etc., it decompresses these file formats and creates what is essentially a raw, uncompressed audio stream.) This stream is compressed using Lossless Compression of Apple (via a QuickTime codec), encrypted with AES 128 bits and then listened (airplay) with an AXE. The stream is buffered for about 2 seconds until the stream is sent. The AX deciphers the flow, decodes and exports in a digital or analog PCM (using a built-in DAC) flows to its audio analog-to-digital versatile optical port.

  So, with the above, you can see that the tone does not simply move source to the destination without much more things. You will not be able to entirely eliminate the delay. Sorry!

• Office 2013 on Win7 using bootcamp has delay time

  I use Win 7 teacher on a piece of Macbook Air 2014 with bootcamp 5 and MS Office 2013. Up to 4 weeks everything works well, and the performance was great. And then I got the delay time:

  -Closing remarks is the longest in about 4-5 sec

  -editig one Excel cell and switch to another will cost about 4 to 5 sec

  - and so on

  Thanks to this performance, it is horrible to work. I have also removed Office and install it again without any result.

  Anyone have some advice for me? Is there some patches in which software never cause this?

  Or am I alone with this?

  THX in advance

  Frank

  Your is no longer in a Mac environment, if this side of "windows" because you're not virtualize, you run Windows as a complete solution for Windows. OS X doesn't play not any part of your experience. Windows as OS X should be updated with patches and update securities, the latter is the only support Windows offers for Version 7, it is out of development and was removed by Microsoft for more than a year. All compatibility fixes should come from Microsoft, see microsoft.com for the availability of these.

  Outside the correction and the issues pourraient be caused by:

  Disk fragmentation that is common in windows. (However it is not under OS X, don't defrag on Mac, OS updates will do everything if it you better than anything you can buy)

  hard disk-ragmenting https://support.Microsoft.com/en-us/help/17126/Windows-7-improve-performance-def

  Font management (again, on the side of 'Windows', your OS X fonts do not play in this)

  3rd party Windows applications, such as anti-virus and the litany of bloatware inherent with Windows. Windows has a startup mode for troubleshooting.

  https://support.Microsoft.com/en-us/help/17419/Windows-7-Advanced-startup-option s-safe-mode

  and possibly disk goes wrong, which can be controlled using this method

  https://support.Microsoft.com/en-us/KB/2641432

• Follow-up of applications for security delays

  When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the footer are affected by the problem.
  If I disable the protection followed in the address bar, the delay goes away.

  I found the problem in Firefox 42. Firefox to reset to the default values and creating a new profile didn't help.

  I can do something on the server to resolve this problem?

  h.Klaus said

  When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the footer are affected by the problem.
  If I disable the protection followed in the address bar, the delay goes away.

  I found the problem in Firefox 42. Firefox to reset to the default values and creating a new profile didn't help.

  I can do something on the server to resolve this problem?

  Could be closed. The problem was caused by a Timeout of Google Tag Manager.

• Is currently plagued by the same problems as a Firefox verion it is - delayed tab swtiching paint, etc. of Thunderbird?

  You know, sometimes I'll go to the Lightning Calendar tab and he painted nothing, but I'll move my mouse and to color elements such as the individual calendar days. Very weird, but I know that Firefox has recently set it exactly the same problem of what they see as a 'condition' (see bugzilla #1067470)

  I have the "TT DeepDark" theme but I have confirmed that the problem is still present on the default theme as well.

  (Delayed) Update: looks like to me that this has been resolved in silence with the version 38.1.0, released July 9, 2015. Initially, I thought it was a question of OC with my gpu, but after additional testing, which was not the case.

• Name - 2 or 3 good programs FREE to remove TROJANS from my old Compaq?

  Here's the situation. I have an old Compaq Presario V6000, working with XP. from now no budget for another computer. The place I'm in, just put hi speed connection.
  I want to get a FREE program to delete Trojans and would like to know, what you're suggesting? Thank you.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• How to delay delivery of a message

  Y at - it an option to write a message and press 'send', but delivery delayed until some predefined time, as I do in Outlook?

  Go to the Add-ons page add and search for send later. It allows you to program the sending times.