Compaq CQ58 - d52SI starts up

Similar Questions

• Need drivers for Compaq CQ58-d52SI Notebook PC Windows 7 64

  Hello

  Someone who can help me find drivers for my laptop PC portable Compaq CQ58-d52SI?

  I need for Windows 7 64 bit...

  Thank you!

  On the hp customer care website, there are audio drivers and network for your model. Here is the link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5396717#N266

  Also, I have gathered most of the necessary drivers for your model and posted here:

  FTP://Win7:R6yq * [email protected]/Notebook/Plato%201.3_HP%202000.zip

  The size of the file would be approximately 0.7 GB.

  If you still need the missing drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• laptop Compaq CQ58: id of failure to the dst short hard drive RGF0R0

  my notebook Compaq CQ58 3 year, husbands, froze and wouldn't respond, after a few hours I force it down by pressing the power button, when I tried to start it up again once he went int automaticic repair, it took more than 24 hours.

  but the computer continues to freeze and go into the auto repair each time and was unusable.

  I don't have a recovery disk, none came with the computer and stupidley has not created a when the computer was new. being the only other computer that I have a windows vista I could not create one on this machine.

  As their was anything important stored on the computer I decided to reset the computer hoping that would solve the problem.

  I followed the instructions and the computer seems to be going through the motions to reinstall when he got stuck in a loop of

  the HP points logo swirling

  a popup with the date and time and please wait

  a white screen with the top of the window cmd at the bottom left of the screen

  back to points logo and swirling HP

  a popup with the date and time and please wait

  a white screen with the top of the window cmd at the bottom left of the screen

  After 48 hours I force crashed computer

  I ran the race test that everything happened except the short DST hard drive

  Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

  This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

  Thanks in advance for any help

  Fiona-s wrote:
  
  

  I ran the race test that everything happened except the short DST hard drive

  Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

  This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

  Thanks in advance for any help

  Hello Fiona-s,

  Thanks for posting in the Forum of Support HP!

  I'm afraid that the HARD drive has failed - the question is material one and all simply restore/reinstall will not solve it. Yes, you need to replace the HARD disk new or better with the SSD. SSDS are up to 10 times faster than hard drives:

  > http://ocz.com/consumer/ssd-guide/ssd-vs-hdd

  > https://en.wikipedia.org/wiki/Solid-state_drive

  There are more than 100 manufacturers and sellers SSD, but personally, I would choose Samsung, Intel, Toshiba, or OCZ ones.

  Microsoft Windows 7, 8.1, and 10 have supported for SSDS. Vista and XP - no

  You will need a recovery media to restore the windows once you have installed the new SSD or HARD disk.

  You can get possible by contacting HP Support. Here's how:

  > http://support.hp.com/us-en/document/bph07143

  > http://www8.hp.com/us/en/contact-hp/contact.html

  > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  Feel free to post if you have any other questions.

• How to replace Windows 8 with Windows 7 on a Compaq CQ58

  Hello!

  Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:

  1. it is posible to change 06:52 on my laptop CQ58?

  2 and if so, can I have programs default HP on this subject?

  3 and if so, how?

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.

  2 and if so, can I have programs default HP on this subject? NO.

  3 and if so, how?

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  (15) download and install the drivers from the support page for your computer.

  After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Compaq CQ58-201SU

  Hello

  I have a compaq CQ58-201SU.

  What happened:

  I tried to reinstall windows. Current vesion was Win8.

  New Windows disk is Pro 8.1.

  It gave me an error message saying the following:

  "Windows cannot be installed to this disk. the selected disk is a MBR partition table. The EFI, Windows system cannot be installed on GPT disks.

  I was about to download Gparted on a USB key to set the partition type.

  Tried it once more just to make sure it wasn't a mistake.

  Laptop computer willl no longer starts or won't let me not even get into the BIOS.

  Caps and screen black lock blinkig twice between breaks. -(HP FAQ thead, it is an indication for corrupted BIOS).

  Tried the Reset Hard Power. (Remove the battery, press and hold the power button for 15 sec, put the battery back on, alternative current summer)-did not work.

  I tried a BIOS reset. (Press Windows key + B first and then press the button for a second, while now the other keys, then release them together) - tried several times, nothing happens.

  Someone has an idea, what do I do next?

  I solved my problem by following these steps.

  Removed the battery.

  Removed the two rear panels covering the WiFi card + RAM and HDD bay.

  The deleted BIOS battery.

  WAITED 5 minutes.

  Put everything back together.

  Startup. > Get message to reset the BIOS.

  Reset.

  Now, everything is normal.

• Compaq CQ58: Win 8.1 recovery dvd creation failed

  Hello

  I support the elderly, problems of computer as a volunteer.

  A member has a laptop Compaq CQ58 with Windows 8.1.
  I started RecoveryManager for a set of 4 recovery DVDs.
  (4 unused dvd of same brand were ready to use.)

  Disc 1 + 2 finished ok. during writing dvd #3 there was an error and
  Recovery Manager stopped.
  See the last line of RM rating below.
  There is only a SINGLE attempt to create a recovery disc/usb/dvd!
  Wat to do now? Wat can be done?

  Thank you for your help in advance.
  Erich

  ========

  .....
  [16/03/2015 17:09:04]   SplitMergeManager.Worker_SplitFile - start
  [16/03/2015 17:09:04]     [IN] sourcePathName = D:\preload\install.wim
  [16/03/2015 17:09:04]     [IN] destPathName = C:\Users\Megens\AppData\Local\Temp\tmp3492.tmp
  [16/03/2015 17:09:04]     [IN] offsetSize = 800
  [16/03/2015 17:09:04]     [IN] pieceSize = 4284
  [16/03/2015 17:09:04]     [IN] nthPiece = 3
  [16/03/2015 17:12:26]   SplitMergeManager.Worker_SplitFile - end
  [16/03/2015 17:12:26] + 4284 MB (\Data.bin)
  [16/03/2015 17:12:26] size = 4284
  [16/03/2015 17:12:26] ProcessEntry.Status = FINISHED
  [16/03/2015 17:12:26] ProcessEntry.Status = running
  [16/03/2015 17:23:34] DBT_DEVNODES_CHANGED
  [16/03/2015 17:29:34] [Exception] Director.Worker_CreateRecoveryDisk - HRESULT:0 80131500 x. Burning disc fails.
  [16/03/2015 17:31:37]
  [16/03/2015 17:31:37] MenuEntry.UserControl_MouseEnter - start
  [16/03/2015 17:36:48]
  [16/03/2015 17:36:48] MenuEntry.UserControl_MouseEnter - start
  [16/03/2015 17:36:49]
  [16/03/2015 17:36:49] MenuEntry.UserControl_MouseEnter - start
  [16/03/2015 17:41:40]
  [16/03/2015 17:41:40] MenuEntry.UserControl_MouseEnter - start
  [16/03/2015 17:58:54] DBT_DEVNODES_CHANGED
  [16/03/2015 18:21:05]
  [16/03/2015 18:21:05] MenuEntry.UserControl_MouseEnter - start

  Hi @sigi08 ,

  Thank you for your inquiry.

  Kudos to you for helping seniors!

  I understand that when trying to create the recovery disks, that he failed on #3 and is no longer allows to complete the set.

  Please, contact the HP support and explain what happened.  They will be able to help you to obtain or complete the recovery disks.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Concerning

• HP Compaq CQ58 PN D0X18EA #ABU OS WINDOWS 8? How do I downgrade from Windows 8 for Windows 7?

  Dear community

  I really would like to substitiute the Windows 7 operating system for installation of Windows 8. I was told that is not possible, but I wanted to check with you before I give up on this issue.

  Thank you

  JB39STR

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You should ENABLE 'Secure Boot' and 'Legacy Support' in the 'BIOS Setup boot secured' on the settings below page before you may try to install Windows 7;

  

  or

  

  In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest to use a disc of Windows 7 SP1 for the best installation experience. If you need a Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. The USB can not be recognized as valid a source of UEFI boot by some computers if it is formatted in NTFS and may require some modifications to work correctly.

  Here are the specifications of your laptop Compaq CQ58-331SA. For your model, HP seems to provide that drivers of Windows 8. Many drivers Windows 7 (with the exception of the Audio driver) from the page of drivers PC laptop HP Pavilion 2123us g6 should run on your computer. Please try this Realtek HD Audio Driver. Do not use the BIOS file in the page g6-2123us is not compatible with your model.

  Thanks for posting to the Windows Device Manager "Hardware ID" additional missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Problem with new Compaq CQ58

  I bought a Compaq CQ58-201SA as a surprise gift for my young grandson.

  BEFORE GIVING IT to HIM, I want to load some programs, so it's all ready for him to go.  However, when you start the new laptop for this purpose, I get invited to "Choose a color" (for display) and "Name your computer" as part of the initial installation process.  Well, I don't want to do this - it's for my grandson to decide later - but I find it impossible to overtake this screen without entering a name.

  How can I pass this screen?  And will there be obstacles to go through before I can start loading the new similar software?

  Please help a Grandpa who are struggling!

  Thank you very much, Kalt.

  It's a shame I won't be able to get his laptop in the mode "ready to go" before giving him the gift.  Well...

  Thanks again for your quick and helpful response.

• Install HP Compaq CQ58-d04SM bluetooth can´t

  I bought a Compaq CQ58-d04SM PN E4Q06EA #BED and install Win 8.1 Pro. I can't install the bluetooth driver.

  In the Device Manager in the properties of the controller Bluetooth is written:

  The drivers for this device are not installed. (Code 28)

  There is no compatible driver for this device.

  To find a driver for this device, click Update driver.

  I downloaded two drivers for the Hp http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5404... website

  If I install Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS pilot error message is: "the device may not be present or could have been ejected/disconnected from the system. Insert or reinsert now', or

  If I install the software Mediatek Bluetooth driver Compaq will restart before the end of the installation.

  Where can I find a driver?

  Thank you

  I found what the problem with my bluetooth. It's a Bluetooth support service. I have to go to start - run - Bluetooth support service - Services and to assign to this service manual automatic starting and I start this service. Then I install Ralink (Mediatek) bluetooth driver (this time there is no restart before the end of the installation) and that s all. Bluetooth works.

• Compaq cq58: I have forgotten/lost the Bios password

  I forgot the bios password

  Stop code is 56293940

  Please review soon

  Model - laptop Compaq CQ58

  Pruduct number - C2B12EA #UUW

  Hello

  Use the code to reset below

  49191386

• Compaq CQ58: bios password

  pls help, bios password for compaq CQ58. code 85654554.  Thank you

  @pendeza

  Enter 30732590

  Kind regards

  DP - K

• Cq58 Compaq: compaq cq58 system off code 97190297

  This is the code that my Compaq cq58 give me.

  97190297

  Please help me.

  @siltricos

  Enter 28898819

  Kind regards

  DP - K

• Realtek ethernet error code driver 35, Compaq CQ58, Windows 8.1

  Hello.

  I have a new laptop Compaq CQ58-353EM. It came with preinstalled system (Windows 8). Subsequently, I installed Windows and HP updates.

  The problem I have is with the Realtek PCIe FE Family Controller (ethernet). In Device Manager, it is represented by a yellow triangle with an exclamation point. In the State of the device, it is stated: your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35).

  Laptop has everything system and hp updates installed.

  I have tried the following to resolve the problem:

  -2 versions of various bios (F.26 and F.25).

  -several add/remove/reinstall the Realtek drivers

  -2 different versions of Realtek drivers: 8.3.730.2012 and 8.20.815.2013 (extract from the Realtek site).

  Ethernet works OK on Ubuntu.

  Any suggestions or solutions to this problem?

  New test BIOS

  CQ58 Notebook PC and HP 655

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Compaq CQ58-230SF: I forgot the password admin or bios for compaq CQ58

  I have a problem with my laptop. I do not remember the password bios compaq cq58-230SF. after heating 3 times enter theres a 63207873 code. Thank you for your help

  Bruno

  Hi, Bruno:

  Enter the unlock code...

  72165275

• I forgot the password admin or bios for compaq CQ58

  My model is Compaq cq58 laptop need bios password or admin am locked out of my own laptop don't remember password.

  Try Brian.

  78763289

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.