Compaq cq62
Hello, I forgot my administrator password and I get the key 91041612 disabled system.
Hello
Enter: 24929234
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Compaq CQ62-219WM showing black screen AFTER the replacement.
So I guess my question is fairly simple. When I replaced my client on their Compaq CQ62-219WM screen and it appears black. When I shine a flashlight in it, I see the start menu and whatnot. This means that I must file a RMA right? I'm guessing that because black light is out.
Indeed, the Assembly of replacement LCD display screen could be faulty. You meant was to request an RMA from the supplier that you used with the supply of a replacement. Yes, in this case, I would like to request an RMA number.
-
What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC? Want a 750 GB 7200 RPM.
davidljtn44Hello
1. RAM: please look at this: (total 8 GB max).
2. HARD drive: no problem. It can use 750 GB 7200 rpm or more.
Good luck
-
Compaq cq62-423nr: new hard drive will not record cq62 notebook recover
I did the recovery discs when the laptop was purchased (compaq cq62-423nr).
I recently had a disk failure hard and bought a seagate 500 GB 5400 disc to replace the disk of 320 GB 5400
has run the recovery discs twice more than minimum and also full reset. the recovery process all 3 times crossed the 4th disc until the end and restart found no bootable disk.
has ran the bios diagnostics and recovery disk diag too. all the past. It also has the BIOS current rev.
Would be to put Linux on, if it was not the wife. Any help to get out me of the dog house is appreciated.
Hello
Your listing: http://support.hp.com/us-en/document/c02800846
I think that the recovery disks is bad or corrupt.
If you like, order a media recovery directly from HP:
https://h10025.www1.HP.com/ewfrf/wc/mediaOrder?softwareitem=630259-001&cc=us&DLC=en&LC=en&OS=4063&product=5101367&sw_lang=Alternatively, you can make bootable USB with Windows 7 Home Premium 64 - bit ISO & do a clean install:
http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO
Windows 7 Home Premium x 64 English
Size: 3 243, 070 KB, MD5 hash: da319b5826162829c436306bebea7f0fNote: THIS METHOD MAY WORK only if YOU CAN CLEARLY & LISIBLEMENT READ 25 CHARACTERS OF the KEY ACTIVATION of PRODUCT PRINTED ON COA STICKER at the BACK OF the laptop.
Download, save the latest versions of the drivers & copy it into another USB and install it later after the installation of Windows:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5101367#N7923Tutorial INSTALL CLEAN:
http://www.SevenForums.com/tutorials/219487-clean-reinstall-factory-OEM-Windows-7-a.htmlConcerning
Visruth
-
no wireless connection on compaq cq62
Hi, I just reinstall windows 7 on compaq cq62 and there is no wireless connections available help pleaseee
DOWNLOAD THE WLAN DRIVER FOR YOU SYSTEM FROM HP SITE AND HE INSTAL
http://WWW8.HP.com/us/en/support-drivers.html
Good luck
<------DONT 4get="" to="" click="" on="" the="" kudo="" star="" on="" the="" ryt="" side="" to="" say="" thanks="" if="" i="" helped="" you="">------DONT>
I AM NOT AN EMPLOYEE OF HP, SO YOUR ANSWER WILL GIVE ME THE INSPIRATION TO CONTINUE IN THE FORM... -
I plan to buy an Apple 80 GB hard disk 3.5 SATA for my Compaq CQ62, the hard drive that I have for you is a "WD 500 GB 2.5 SATA II.
Ports appear as it will keep and everything, but I'm curious to know, if I get this drive, I'll be able to install my Macintosh on that hard drive and use it on my laptop Compaq CQ62 or not?If this isn't the case, then I'll be able to install Windows 7 or uBuntu on this hard drive? The hard drive will fit even on my laptop? Thank you!Why you want to replace a 500 GB with a 80 GB drive it?
Macintosh is not an operating system
A 80 GB drive is too small for a win7 PC
-
Failed to retrieve Compaq CQ62-217AX
Hello
I have a compaq laptop CQ62-217AX, and I have recently run recovery on it, and after that the laptop finished recovery process has restarted and showed a bar that says Windows load the files, then he quickly vanished and changed to the loading screen 7 Windows and after that a prompt is displayed in windows and dialogue full screen then stands up and says "recovery did not complete.
I have re recovery plant performance with the same result and cannot operate, I should mention that I don't have the original abd HDD 320 GB I have a 750 blue digital Western in the laptop.
I would appreciate help.
Thanks in advance
HI and thanks for your response
I was able to get the recovery yesterday working media and the laptop restored without problem.
Thanks a lot for your help.
-
Presario cq62: compaq cq62 preasariob factory reset
I have a compaq presario and I don't remember wat my admin password, how can I reset my code is 53852404
Please help thanks
Hello
Enter: 42730420
Kind regards
DP - K
-
Compaq Cq62-225nr: Bios password :(
I don't remember the Admin password on my CQ62. Has been on the shelf for a while due to an upgrade, which now broke down. It is locked and it gives me a code saying 89794268. Sort of help or am I out of luck?
Try > 36692868
-
Compaq CQ62 screen lights with caps lock stuck.
Hello
My computer compaq laptop is a month old. When I turn it on, I hear the fan, but that's all. No beeps and the only visible light is the caps lock key, which does not turn off. The screen is completely blank. No cursor blinking, no music windows, nothing. I tried to turn it on using only the stored battery power - no luck. I turned on and off several times - no luck.
Thank you very much in advance for any advice for helping me fix this very premature!
Kate
Hi Kate,.
Try the following.
With the laptop off, remove the AC adapter and then remove the battery. Press and hold the power button for a minute. Plug the power adapter (leave the battery) and see if the laptop boots.
Kind regards
DP - K
-
Hey I had a problem with my compaq cq62
Well this is saying me tha theres no drivers on the pcwhen I try to program it, but on the screen after the compaq sign spell he found bootablr device. Insert a bootable CD, then press to continue, can I get help on this
No boot device would mean that it cannot read a boot sector of any of the devices detected by your machine. This could be because the hard drive is bad, the boot sector is damaged or you let a non bootable DVD/CD in the drive. You can enter the bios and see if you have all of the hard drives listed or recognized by the system? My best guess is that you have a problem with the hard drive.
-
Lost password Bios Compaq CQ62 Ressario
I lost my password list. worst of all. I can't rember password Bios on CQ62 as it was a long time ago, and I need to reinstall an OS I get this number after the failure of attempts 92165874... help!
Hello
Enter: 23843270
Kind regards
DP - K
-
COMPAQ CQ62: COMPAQ CQ62
I want to change my laptop AMD other processor, please suggest that may be suitable for my laptop?
ImranUmerHI @ImranUmer,
Thank you for your response.
I am unable to provide direct recommendations. Any processor that is listed in the maintenance and service guide is a recommended replacement and has been tested with your model. Get the details on a particular processor, to their individual research from the website of the manufacturer.
Good luck!
-
Compaq cq62: 0xe0f0001 error in the recovery disc 3
Hello, I have a problem with the recovery disk.
I change the hard disk, because the original was cut down.
When I try to reinsall the software with the recovery disc, the system show me error 0xe0f0001 3.
Where can I find the Windows 7 Home premium ISO Italian language?
I can't find any working link...
Thank you
Davide.
Hello @Dsimoni,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I understand that you have a problem with the system recovery and tried to help you!
If you are looking for a recovery that are compatible with your product media, you can consult this site. Once there, enter your product number and click on 'Go '. You can select your product on the next screen, using the drop down '+', on the right. On your product support page, you can select the software and drivers, and then click the 'Go', i.e. the Option 2. Once you select your operating system and click "Update." The category you are looking for is Order Recovery Media-CD/DVD/USB.
You can also consult the following, to try to resolve the issue of system recovery. Please let me know how it goes:
HP computers - resolution of the problems of recovery HP System (Windows 7)
Computers laptops HP - system recovery can fail or display error messages (Windows 7 or Vista)
Please let me know if this information has been helpful by clicking the thumbs up below. If this post has solved your problem, then please click accept as a Solution.
Have a great day!
-
Compaq CQ62 administrator password, system off: 66041214
I have not used my laptop in over a year. I turned it on and it says: I need an administrator password and gave me a code system off: 66041214
Try Christmas.
79929830
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
Maybe you are looking for
-
Can not connect to the WiFi on MacMini 2014
When I try to connect to any WiFi on my MacMini it says ' Unable to join, try to get closer the router. but the router is right next to my Macmini. In addition, my wifi connection is correct. It is easily connected to my iPad and iPhone. I tried tran
-
Full screen bookmarks page always and do not close
When I open the bookmarks it page automatically switch to full screen on my mac without makes me so even if firefox is not full screen mode and it is also stuck on the front office and cannot be closed or minimized or its size changed it can be moved
-
HP 15-af131dx: should I update windows 10 birthday?
Should I update to windows 10 birthday? Someone had problems with the update?
-
Acquisition of multiple simultaneous analog output data
Hello, I'm doing a program when a user telnet to my computer and labview will recevie provided cn and analyze. then, he deciphers the emssage find what analog output it trying to change and then change it. I all the work, but I get error 50103 who sa
-
How can I change my connections by which windows manages my wireless network.