Full screen bookmarks page always and do not close

Similar Questions

• After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

  If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

• Pop - up undefined titled messages and does not close

  Hi all.
  I installed Peoplesoft 9.1, PT8.52 (Oracle database 11G 64-bit) on windows 2008 server 64-bit and a HRMS DEMO DB on one machine virtual PSDEMOVM.
  I also installed Oracle 11 G client 32 and configured a client workstation PS on another machine virtual PSDEMOWS.
  I installed the app and web servers and the application is finally running.
  Now in the app, all the messages are titled "undefined" and when I click 'OK' or 'Cancel', nothing happens and does not close the message.
  (For example at least one key must be entered).
  I have to refresh the page to get rid of this message.
  
  What Miss me?
  
  Published by: Bechara D October 31, 2012 07:55

  That's pretty strange requirement I would say. You want to run a demo regardless the appl version?
  In any case, take a look at HCM9.1 Dec-2010 FP, it can fit with your limitation (PT8.51 base).

  Nicolas.

  PS: at the end of the day, you can go for Peoplesoft LMOS models provided free of charge.

  Published by: Gasparotto N 31 October 2012 16:56

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• Whenever I have press F11 or click full screen, my address bar and the tabs will not go down as they normally do. How can I fix it?

  I recently hooked another monitor to my laptop, that was when the problem occurred, but even after restarting Firefox * and * my computer, it did not always work. By collapse, I mean when you press F11, the open tabs and the address bar appear smaller, and then they slide up until what you don't see it (unless you mouse over). Please help me solve this =)

  Thank you!

  You can right click on the tab bar or the Navigation bar mode full screen (F11) and make sure that "Hide toolbar" is enabled.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I go to mode full screen, my favorites, address and the toolbar of the tab lines do not disappear!

  And, Yes, I use the latest version of Firefox!
  It looks like this:

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Full screen, you can right click on a toolbar (toolbar tabs) space blank and click "hide the toolbar.

• When you play games like Cityville, Farmville etc. Never, I get the full screen. The bottom and the right side are cut off

  When I opened these games, parts of the game screen is not displayed. If I click to full screen in Farmville, it shows in Cityville I can't click to full screen but the part of the screen is missing. If I open these games in Internet Explorer. the entire screen appears.

  I also have this problem, the bottom of Cityville fell after some actions, mainly requesting assistance on an object that must be 'charged '. The regular calls that go straight to the facebook wall don't do that. In any case, after experimentation, I found an easy solution that works every time. I have click on the free gifts tab and send the box stuff, NRG, allowed, just some, and it resets the problem without having to close the tab in Firefox.

• Don't see any photos or video in full screen - using Internet Explorer and Mozilla Firefox

  We use internet explore, but I also use Mozilla Firefox.  When I am posting a photo or video, in each program and try to watch it full screen, I do not see the image.  It seems to go full-screen, but it is white Uni.  It seems to have started after Firefox update

  Make sure that you have updated adobe flash player.

  http://www.Adobe.com/support/flashplayer/downloads.html

  S.Sengupta Media Center MVP

• HP Touchsmart: Touch screen accidentally disabled decide and PC not install mouse

  My HP Touchsmart was installing all new devices, the slice would always fail. Try to fix it I went to the Device Manager and accidentally disabled the touch screen device. Now I can't click the screen anyway, so I was wondering if there is that a way to factory reset the computer without a connection inside or by clicking on the screen or to activate the touch screen (once again without being able to click on the screen). If you would like more information for a solution please ask. So basically no mouse, touchscreen disabled and can not use my computer! Thank you.

  Yes, you can reset the computer without going through Windows, but I advise to use a mouse to touch before you do. Also try to start in sate mode and allowing the touch function.

  See suite for the reset:

  http://support.HP.com/us-en/document/c01867418

  http://support.HP.com/us-en/document/c03546603

  Docs also applies to Vista.

• How to have a button full screen in flv player and where the other player of skin?

  Hello!

  Currently, I use Dreamweaver CS5 to create a page that plays FLV video.

  I use the feature since dreamweaver insert flv media, insert the flash drive in the html code.

  It works great but:

  - Did not have a button full screen (none of the 3 skins (clear, halo, corona)

  So where can we download more skin with additional options (dreamweaver compatible of course)?

  Thanks for help

  Mike

  This solution is not professional at all. We are a company...

  Ok. DW does not much.  Short to build your own custom player in Flash Professional, look in the site Adobe Exchange (see link below)

  http://www.Adobe.com/cfusion/exchange/index.cfm?searchfield=Flash+Player&search_exchange=3 & categorie_recherche = 1 & search_license = & search_rating = & search_platform = 0 & search_pubdate = & num = 2 5 & startnum = 1 & event = search & sticky = true & sort = 0 & rnav_dummy_tmpfield = & submit =.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Pages stopped and will not start again?

  I was working in pages on my macbook Pro and all of a sudden it stopped. Normally pages start to the top, but this time it didn't. I removed and installed the app pages yet, but it still does not work. Can someone help me?

  Thank you

  Miranda

  What specific version of Pages with Mac OS X you are running our MacBook Pro?

  Open pages from others, or not successfully documents?

• Accidentally touched a button on my keyboard and the screen is too low and will not brighten

  Hello thereeee, uhm, I played a World of Warcraft and I tried to hit the numbers and went too far up and hit one of the buttons above the numbers then my screen was suPER low and I mean really dim. And I can't make it bright. I have a Lenovo computer with an Intel processor and Windows 8, and no matter what I press it will get more light. The battery is full and I tried to restart my computer, uh Yes, please answer quickly. I need to play more WoW, thanks k.

  Jesse xx

  I fixed it, finally!

  http://www.YouTube.com/watch?v=FKQuW46gCfQ

• Full screen for the entire work area (not 1 module)

  Hi guys,.

  Is it possible to activate the mode full-screen for the work in first Pro CC, as well as Shift + F area how for Lightroom? Tilde and ctrl + tilde does full-screen for the selected module. I want just the complete workspace in sight.

  CTRL + \.

• Vista Windows freezing guard, does not and will not close properly

  My computer freezing guard, does not, and it not stop correctly. What should I do to solve this problem! I tried to delete the temporary files and running a virus scan and no help

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: Type of startup (registry/Startup folder), Command - Line String, name of the product;
  File Version, company name, location in the registry or the file system and more. It allows you to
  allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The
  Window Watcher says it all, reporting of any window created by running programs, if
  the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Photoshop CC 2015 - recovered files does not close, PS is not closed and does not close files randomly

  Hope that there is little help for that matter. I have not found similar questions in the search, or I had a bit of luck on other sites:

  MAS OS 10.10 PS CC 2015 running.

  I'm having a problem where random files that have been opened will not close. I am not in a position to leave Photoshop either... only a force quite stop the program however once I raise the PS, the files that would not reappear near, sometimes they are listed as recovered files but not always.

  The files that are listed as being recovered will not close no matter what I do. I tried to locate an Auto valuation folder as some people had suggested to a similar problem with PS CS6, but it does not work for 15 CC.

  A few rare occasions, I was able to catch the recovered files before they open and cancel the process which does not solve the problem, but that only works if the files are large enough so they take more than a few seconds to open. The files of smaller size will open almost instantly and I'm stuck with having up to 8 files to open, that I don't need or want.

  I have tried zapping the P - ram (suggestions from other sites) but no luck and trashing preferences.

  Any help would be greatly appreciated. Thank you.

  Charles

  In file management turn off Auto Save recovery

  

  Save as files to you office or somewhere that you can find them. Force quit. Run disk utility and set your permissions. Then try to Photoshop.