Failed to retrieve Compaq CQ62-217AX

Similar Questions

• Compaq CQ62-219WM showing black screen AFTER the replacement.

  So I guess my question is fairly simple.  When I replaced my client on their Compaq CQ62-219WM screen and it appears black.  When I shine a flashlight in it, I see the start menu and whatnot.  This means that I must file a RMA right? I'm guessing that because black light is out.

  Indeed, the Assembly of replacement LCD display screen could be faulty. You meant was to request an RMA from the supplier that you used with the supply of a replacement. Yes, in this case, I would like to request an RMA number.

• Failed to retrieve quotes and news from investor to my 99 Silver plan

  Failed to retrieve quotes and news from investor in my 99 Silver plan

  Hello

  Could be a temporary problem.

  Check in the Microsoft Money Forum.

  Microsoft Money - Forum
  http://social.Microsoft.com/forums/en/money/threads

  Microsoft Money Solution Center - suggests alternatives
  http://support.Microsoft.com/mny

  What is Microsoft Money Plus sunset
  http://support.Microsoft.com/kb/2118008

  BING - microsoft money replacement
  http://www.bing.com/search?q=Microsoft+Money+replacement&go=&QS=n&SK=&SC=7-27&form=QBLH

  Google - microsoft money replacement
  http://www.google.com/#sclient=psy-ab&hl=en&source=hp&q=microsoft+money+replacement&pbx=1&oq=microsoft+money+replacement&aq=f&aqi=g4&aql=&gs_sm=e&gs_upl=9978l11972l2l12926l12l1l0l0l0l0l467l467l4-1l1l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=dcc84c4c7dd2e143&biw=1024&bih=681

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC?

  What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC? Want a 750 GB 7200 RPM.

  davidljtn44

  Hello

  1. RAM: please look at this: (total 8 GB max).

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Presario+CQ62+series/Presario+CQ62-219WM-upgrades.html

  2. HARD drive: no problem. It can use 750 GB 7200 rpm or more.

  Good luck

• Compaq cq62-423nr: new hard drive will not record cq62 notebook recover

  I did the recovery discs when the laptop was purchased (compaq cq62-423nr).

  I recently had a disk failure hard and bought a seagate 500 GB 5400 disc to replace the disk of 320 GB 5400

  has run the recovery discs twice more than minimum and also full reset. the recovery process all 3 times crossed the 4th disc until the end and restart found no bootable disk.

  has ran the bios diagnostics and recovery disk diag too. all the past. It also has the BIOS current rev.

  Would be to put Linux on, if it was not the wife. Any help to get out me of the dog house is appreciated.

  Hello

  Your listing: http://support.hp.com/us-en/document/c02800846

  I think that the recovery disks is bad or corrupt.
  If you like, order a media recovery directly from HP:
  https://h10025.www1.HP.com/ewfrf/wc/mediaOrder?softwareitem=630259-001&cc=us&DLC=en&LC=en&OS=4063&product=5101367&sw_lang=

  Alternatively, you can make bootable USB with Windows 7 Home Premium 64 - bit ISO & do a clean install:

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO
  Windows 7 Home Premium x 64 English
  Size: 3 243, 070 KB, MD5 hash: da319b5826162829c436306bebea7f0f

  Note: THIS METHOD MAY WORK only if YOU CAN CLEARLY & LISIBLEMENT READ 25 CHARACTERS OF the KEY ACTIVATION of PRODUCT PRINTED ON COA STICKER at the BACK OF the laptop.

  Download, save the latest versions of the drivers & copy it into another USB and install it later after the installation of Windows:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5101367#N7923

  Tutorial INSTALL CLEAN:
  http://www.SevenForums.com/tutorials/219487-clean-reinstall-factory-OEM-Windows-7-a.html

  Concerning

  Visruth

• no wireless connection on compaq cq62

  Hi, I just reinstall windows 7 on compaq cq62 and there is no wireless connections available help pleaseee

  DOWNLOAD THE WLAN DRIVER FOR YOU SYSTEM FROM HP SITE AND HE INSTAL

  http://WWW8.HP.com/us/en/support-drivers.html

  Good luck

  <------DONT 4get="" to="" click="" on="" the="" kudo="" star="" on="" the="" ryt="" side="" to="" say="" thanks="" if="" i="" helped="" you="">
  I AM NOT AN EMPLOYEE OF HP, SO YOUR ANSWER WILL GIVE ME THE INSPIRATION TO CONTINUE IN THE FORM...

• This hard drive is compatible with my laptop? Apple 80 GB HDD 3.5 SATA for my Compaq CQ62, the hard drive that I have for that one is a "WD 500 GB 2.5 SATA II.

  I plan to buy an Apple 80 GB hard disk 3.5 SATA for my Compaq CQ62, the hard drive that I have for you is a "WD 500 GB 2.5 SATA II.

  Ports appear as it will keep and everything, but I'm curious to know, if I get this drive, I'll be able to install my Macintosh on that hard drive and use it on my laptop Compaq CQ62 or not?
  If this isn't the case, then I'll be able to install Windows 7 or uBuntu on this hard drive? The hard drive will fit even on my laptop? Thank you!

  Why you want to replace a 500 GB with a 80 GB drive it?

  Macintosh is not an operating system

  A 80 GB drive is too small for a win7 PC

• Failed to retrieve the kernel symbols.

  Hello

  I was wondering if anyone else has had it before. For some unknown reason, my VM Win7x64 which I use very good for 2 or 3 years has stopped working. When I try to run it, it comes up with the following error messages; I have to click OK to go to the next message. I uninstalled VMWare and I have restored the virtual machine to start a VM work last week. None of them worked and now I need help.

  Failed to retrieve the kernel symbols.

  Could not initialize the surveillance apparatus.

  Internal error.

  VMWare Pro - 6.0.1 (1331545O

  Help, please

  Hi farbeyond,.

  Please see the post of karthikg2013 here: Re: my Virtual Machine unbootable molten

  See you soon,.

  --

  Darius

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• Failed to retrieve this file?

  Hello

  I have written some documents in InDesign CS4 over the weekend and exported inx file to work on it to work using CS3. Something I do quite often.

  When I opened and save it as a new document in CS3 and trying to change my text, I get an error message that says:

  "Failed to retrieve this file. It can be used by someone else. "

  It's crazy, because it it only my folder and is not on any network etc... etc... etc...

  We know what could cause this and how I can close it, so I can work on my file?

  Thank you!

  Babs

  Are you sure that you didn't export an .incx file or resources (history of InCopy CS3) by chance?

  Bob

• Failed to retrieve the mappings for the server. Reason: null

  I get the following in the Console error when I add or update my server

  [oolocal], (07 / 14 at 04:40:11): server is available. Get the settings from the server to the server
  [oolocal], error, 07 / 14 at 04:40:12, impossible to fetch Server mappings. Reason: null
  [oolocal], error, 07 / 14 at 04:40:12, failed to get the logs directory. Reason: null

  Standalone CF8

  Webroot in c:\inetpub

  RDS works (so I can browse the datasource)

  Kind regards

  Aaron

  This problem is known. Failed to retrieve the mappings for the server. Reason: null. We fix it.

  Just to check the parameters are collected successfully from the server. Create the project and join the server to the same. CFM open and type must identify the data sources.

• UCM - BPEL failed to retrieve the form of update process. Cannot run the service

  Hello
  
  
  I am trying to integrate the University Complutense of MADRID 10.1.3.3.3 with BPEL 10.1.3.5, I already installed the component of the UCM BPEL and updated the jar files in/custom/BpelIntegration/lib with the pot in BPEL.
  
  Also define the connection between UCM and BPEL
  
  the Configuration ID: Local
  Description: Local BPEL
  Domain: by default
  
  JNDI properties
  First factory of context: oracle.j2ee.rmi.RMIInitialContextFactory
  The provider URL: opmn:ormi://localhost:6105:oc4j_soa / orabpel
  Principal: oc4jadmin
  Identification of security information: *.
  
  When I test the connection it seems to be valid "JNDI parameters were validated successfully."
  
  but when I try to create a process with bpel configuration, the following ERROR Message appears:
  
  Content Server request failed
  Failed to retrieve the form of update process. Unable to run the 'getDeployedProcesses' of service method. (System error: runtime error: java.lang.IllegalStateException: can't replace cause)
  at java.lang.Throwable.initCause(Throwable.java:320)
  to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265)
  to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184)
  to bpelintegration. OraBpelHandler.getDeployedProcesses (OraBpelHandler.java:224)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75)
  at intradoc.server.Service.doCodeEx(Service.java:488)
  at intradoc.server.Service.doCode(Service.java:470)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350)
  at intradoc.server.Service.doAction(Service.java:450)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191)
  at intradoc.server.Service.doActions(Service.java:445)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111)
  at intradoc.server.Service.executeActions(Service.java:431)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632)
  at intradoc.server.Service.doRequest(Service.java:1709)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357)
  at intradoc.server.IdcServerThread.run (IdcServerThread.java:195))
  + [Details] +.
  + Battery service for this request is - ORABPEL_PROCESS_UPDATE_FORM (* no captured values *) java.lang.IllegalStateException: can't replace cause to java.lang.Throwable.initCause(Throwable.java:320) to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265) to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184) to bpelintegration. (OraBpelHandler.getDeployedProcesses(OraBpelHandler.java:224) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461) at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75) at intradoc.server.Service.doCodeEx(Service.java:488) at intradoc.server.Service.doCode(Service.java:470) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350) at intradoc.server.Service.doAction) Service.java:450) to intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191) to intradoc.server.Service.doActions(Service.java:445) to intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111) to intradoc.server.Service.executeActions(Service.java:431) to intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632) to intradoc.server.Service.doRequest(Service.java:1709) to intradoc.server.ServiceManager.processCommand(ServiceManager.java:357) to intradoc.server.IdcServerThread.run(IdcServerThread.java:195) +.
  
  
  
  Can someone help me?
  
  Thanks in advance
  
  Carlos Pereira

  Hello

  Workaround for this problem is:

  Copy orabpel - thirdparty.jar/bpel/lib and place it in the folder/custom/BpelIntegration/lib , and add this variable in intradoc.cfg of the CS (stop the content server before performing this change):

  JAVA_CLASSPATH_bpel =/custom/BpelIntegration/lib/orabpel-thirdparty.jar

  Start content server after the steps above have been completed, and then test to see if the problem persists.

  Thank you
  Srinath

• Error running code system. Failed to retrieve the configuration information

  I get this error:
  
  Error running code system. Failed to retrieve the configuration information for the content Terminal item. Unable to load locale 'American English '.
  
  Details:
  
  An error has occurred. The stack trace below shows more information.
  
  ! csSystemCodeExecutionError! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  intradoc.common.ServiceException:! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
  at intradoc.server.Service.buildServiceException(Service.java:1997)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
  at intradoc.server.Service.createServiceException(Service.java:1986)
  at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:609)
  at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:408)
  at intradoc.server.Service.initLocale(Service.java:333)
  at intradoc.server.Service.initDelegatedObjects(Service.java:201)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
  
  Anebody has an idea
  
  
  Thank you
  REDA

  Hello

  Add the SystemLocale = American English variable in your config.cfg, restarting the CS and then see if the same problem persists.

  Srinath

• Failed to retrieve the HP CQ62 xa500ua

  I have the same problem with this product HP CQ62 xa500ua #aba.

  Went to restore my mother in laws at the factory laptop using the hard drive but has error 'oXeoeF00003' compensation after 15%, the recovery DVD had been created so I tried these and got the system error recovery media does not suppor this computer.

  She is one of the few people I know who created the recovery discs as soon as she got the computer.

  The system was up, but the disc is scratched the partial recovery.  I suspect that the recovery image was not valid from the factory. Now what?

  Note: run all diagnostics hardware and everything going on.

  AMD Athlon II P320

  BIOS F.0UNE

  Windows 7 Home 64

  Called better support they could do was to offer a "Free" recovery disc that cost $25 port and handling.

  They suggested updating the BIOS and and try recover, but I need some kind of boot disk to run the Bios Update.

  Hello

  I doubt that it is a bios problem despite that HP may have suggested, but it could well be a problem with the media / the recovery process - here is another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version that initially provided with the laptop - IE Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• failed to retrieve system

  I searched high and low for a solution, but there is nothing to find.

  I'm currently running;

  Compaq Presario CQ60 - 313SA Vista Home Basic SP1 32-bit

  I recently went through the painful process to do a restore to factory defult complete system. Boot F11 menu using the recovery partition. Something was wrong during the process that will not allow him to fill in correctly. When he finished he took me straight to the desktop (none of the usual startup where you create the user etc.) with an error message.

  "The recovery attempt failed. "Please select one of the following buttons: Please press Retry to continue.

  Click try again just starts the process again and gives the same result. the Details button is nothing more incomprehensible to me, I hope that someone can make sense and find me a solution because I don't like the idea of having to run a system recovery each time I want to check my email.

  If we need more details please let me know.

  the details are as follows:

  [RegistryDevicesCheck]
  Result = PAST

  [PININST_BBV]
  *************************************************************************************************************
  PININST (Mini-FBI) starts at: 10:36:49 Monday, June 20, 2011
  *************************************************************************************************************

  [RunOnceThese_CMD #1]
  LAUNCHED-online "CMD.exe /c C:\System.sav\Util\Pre-BBV1.CMD".
  START-10:36:52 online Monday, June 20, 2011
  Process before => it's 32-bit OS. Skip disable files WOW64 Redirection...
  Postprocessing => is 32-bit OS. Jump, which allows files WOW64 Redirection...
  END-online 10:37:24 Monday, June 20, 2011
  RESULT-online order finished in 31 seconds.
  >==============================================================================
  [RunThese_CMD #1]
  LAUNCHED-online "CMD.exe /c cscript.exe/nologo C:\System.sav\Util\TDCTWKs\ChangeVol.vbs>>C:\System.sav\Logs\ChgVolBB.log.
  START-10:37:27 online Monday, June 20, 2011
  END-online 10:37:28 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #2]
  LAUNCHED-online "C:\SWSetup\ESUVT\ESURun.bat."
  START-10:37:28 online Monday, June 20, 2011
  END-online 10:38:09 Monday, June 20, 2011
  RESULT-online command completed in 41 seconds.
  >==============================================================================
  [RunThese_CMD #3]
  LAUNCHED-online "cmd /c C:\System.sav\Util\detvga.cmd".
  START-10:38:09 online Monday, June 20, 2011
  END-online 10:38:10 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #4]
  LAUNCHED-online "cmd /c C:\System.sav\Util\MoveDRV.cmd".
  START-10:38:10 online Monday, June 20, 2011
  END-online 10:38:16 Monday, June 20, 2011
  RESULT-online order finished in 6 seconds.
  >==============================================================================
  [RunThese_CMD #5]
  LAUNCHED-online "\System.sav\Util\TDC\MCPP\WLAN3. CMD ".
  START-10:38:16 online Monday, June 20, 2011
  END-online 10:38:17 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #6]
  LAUNCHED-online "\System.sav\Util\TDC\MCPP\WLAN2. CMD ".
  START-10:38:17 online Monday, June 20, 2011
  END-online 10:38:18 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #7]
  LAUNCHED-online "\System.sav\Util\TDC\MCPP\WLAN1. CMD ".
  START-10:38:18 online Monday, June 20, 2011
  END-online 10:39:39 Monday, June 20, 2011
  RESULT-online order finished in 81 seconds.
  >==============================================================================
  [RunThese_CMD #8]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\Chipset.cmd".
  START-10:39:39 online Monday, June 20, 2011
  END-online 10:39:40 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #9]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\chpst.cmd".
  START-10:39:40 online Monday, June 20, 2011
  END-online 10:40:22 Monday, June 20, 2011
  RESULT-online command completed in 41 seconds.
  >==============================================================================
  [RunThese_CMD #10]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\setupnv.cmd".
  START-10:40:22 online Monday, June 20, 2011
  END-online 10:41:53 Monday, June 20, 2011
  RESULT-online order finished 91 seconds.
  >==============================================================================
  [RunThese_CMD #11]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\Touchpad.cmd".
  START-10:41:53 online Monday, June 20, 2011
  END-online 10:42:34 Monday, June 20, 2011
  RESULT-online command completed in 41 seconds.
  >==============================================================================
  [RunThese_CMD #12]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\NVVGA.cmd".
  START-10:42:34 online Monday, June 20, 2011
  END-online 10:42:35 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #13]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\Network.cmd".
  START-10:42:35 online Monday, June 20, 2011
  END-online 10:42:36 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #14]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\Modem.cmd".
  START-10:42:36 online Monday, June 20, 2011
  END-online 10:43:37 Monday, June 20, 2011
  RESULT-online command completed in 61 seconds.
  >==============================================================================
  [RunThese_CMD #15]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\IntelVGA.cmd".
  START-10:43:37 online Monday, June 20, 2011
  END-online 10:43:38 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #16]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\Audio.cmd".
  START-10:43:38 online Monday, June 20, 2011
  END-online 10:44:34 Monday, June 20, 2011
  RESULT-online order finished 56 seconds.
  >==============================================================================
  [RunThese_CMD #17]
  LAUNCHED-online "cmd /c c:\system.sav\util\BBBatch\Cardread.cmd".
  START-10:44:34 online Monday, June 20, 2011
  END-online 10:44:55 Monday, June 20, 2011
  RESULT-online order finished in 21 seconds.
  >==============================================================================
  [RunThese_CMD #18]
  LAUNCHED-online "C:\System.sav\Util\TDC\MCPP\BTooth.CMD."
  START-10:44:55 online Monday, June 20, 2011
  END-online 10:44:56 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #19]
  LAUNCHED-online "C:\System.sav\Util\_RTEND. CMD ".
  START-10:44:56 online Monday, June 20, 2011
  END-online 10:44:57 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #20]
  LAUNCHED-online "C:\System.sav\util\CreateRP.CMD."
  START-10:44:57 online Monday, June 20, 2011
  END-online 10:45:04 Monday, June 20, 2011
  RESULT-online order finished in 6 seconds.
  >==============================================================================
  *************************************************************************************************************
  PININST (Mini-FBI) leaves at: 10:45:20 Monday, June 20, 2011
  *************************************************************************************************************

  [Mini-FBI]
  Result = PAST

  [PININST_BBV2]
  *************************************************************************************************************
  PININST (Mini-FBI) starts at: 10:46:51 Monday, June 20, 2011
  *************************************************************************************************************

  [RunOnceThese_CMD #1]
  LAUNCHED-online "CMD.exe /c C:\System.sav\Util\Pre-BBV2.CMD".
  START-10:46:54 online Monday, June 20, 2011
  Process before => it's 32-bit OS. Skip disable files WOW64 Redirection...
  Postprocessing => is 32-bit OS. Jump, which allows files WOW64 Redirection...
  END-online 10:47:26 Monday, June 20, 2011
  RESULT-online order finished in 31 seconds.
  >==============================================================================
  [RunThese_CMD #1]
  LAUNCHED-online "C:\System.sav\Util\Wallpaper.cmd."
  START-10:47:29 online Monday, June 20, 2011
  END-online 10:47:30 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #2]
  LAUNCHED-online "C:\System.sav\USBHARDR\USBCHR4W.cmd."
  START-10:47:30 online Monday, June 20, 2011
  END-online 10:47:31 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #3]
  LAUNCHED-online "C:\System.sav\OSEnhReg\SETUP.cmd."
  START-10:47:31 online Monday, June 20, 2011
  END-online 10:47:32 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #4]
  LAUNCHED-online "C:\SWSetup\ESUVT\ESUDelete.bat."
  START-10:47:32 online Monday, June 20, 2011
  END-online 10:47:33 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #5]
  LAUNCHED-online "C:\system.sav\util\TDC\MCPP\LSPININST.bat."
  START-10:47:33 online Monday, June 20, 2011
  END-online 10:47:54 Monday, June 20, 2011
  RESULT-online order finished in 21 seconds.
  >==============================================================================
  [RunThese_CMD #6]
  LAUNCHED-online "C:\System.sav\Util\TDC\MCPP\HPDVD.cmd."
  START-10:47:55 online Monday, June 20, 2011
  END-online 10:48:41 Monday, June 20, 2011
  RESULT-online command finished 46 seconds.
  >==============================================================================
  [RunThese_CMD #7]
  LAUNCHED-online "C:\System.sav\Util\TDC\MCPP\CyberDVD.cmd."
  START-10:48:41 online Monday, June 20, 2011
  END-online 10:51:47 Monday, June 20, 2011
  RESULT-online order over in 186 seconds.
  >==============================================================================
  [RunThese_CMD #8]
  LAUNCHED-online "C:\System.sav\Util\TDC\MCPP\YouCam.CMD."
  START-10:51:47 online Monday, June 20, 2011
  END-online 10:52:53 Monday, June 20, 2011
  RESULT-online command completed in 66 seconds.
  >==============================================================================
  [RunThese_CMD #9]
  LAUNCHED-online "C:\System.sav\Util\TDC\MCPP\MVRVB.cmd."
  START-10:52:53 online Monday, June 20, 2011
  END-online 11:22:57 Monday, June 20, 2011
  RESULT-online WARNING: Command not ended in 1800 seconds.
  >==============================================================================
  [RunThese_CMD #10]
  LAUNCHED-online "C:\SWSetup\Wallpaper\Disk1\Wallpaper.exe."
  START-11:22:57 online Monday, June 20, 2011
  END-online 11:23:03 Monday, June 20, 2011
  RESULT-online order finished in 6 seconds.
  >==============================================================================
  [RunThese_CMD #11]
  LAUNCHED-online "C:\System.sav\Util\_RTEND. CMD ".
  START-11:23:03 online Monday, June 20, 2011
  END-online 11:23:04 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  [RunThese_CMD #12]
  LAUNCHED-online "C:\System.sav\util\InstallMBR.cmd."
  START-11:23:04 online Monday, June 20, 2011
  END-online 11:23:05 Monday, June 20, 2011
  RESULT-online command completed in less than 1 second.
  >==============================================================================
  *************************************************************************************************************
  PININST (Mini-FBI) leaves at: 11:23:22 Monday, June 20, 2011
  *************************************************************************************************************

  [Mini-FBI]
  Result = FAILURE

  [C:\System.sav\Logs\BB\Atheros.log]
  Result = PAST

  [C:\System.sav\Logs\BB\Audio.log]
  Result = PAST

  [C:\System.sav\Logs\BB\BTooth.log]
  Result = PAST

  [C:\System.sav\Logs\BB\Cardread.log]
  Result = PAST

  [C:\System.sav\Logs\BB\Chipset_MOZ.log]
  Result = PAST

  [C:\System.sav\Logs\BB\CyberDVD.log]
  Result = PAST

  [C:\System.sav\Logs\BB\LSSS.log]
  Result = PAST

  [C:\System.sav\Logs\BB\Modem.log]
  Result = PAST

  [C:\System.sav\Logs\BB\MVRVB.log]
  Log file...
  [10:52:53.75] point = Basic Muvee Reveal
  The standard deviation information...
  The information standard...
  Result = FAILURE

  [C:\System.sav\Logs\BB\OSEnhReg.log]
  Result = PAST

  [C:\System.sav\Logs\BB\SetupNV.log]
  Result = PAST

  [C:\System.sav\Logs\BB\Touchpad.log]
  Result = PAST

  [C:\System.sav\Logs\BB\USBCHR4W.log]
  Result = PAST

  [C:\System.sav\Logs\BB\YouCam.log]
  Result = PAST

  [Log]
  NumOfLogs = 14.

  [DumpFile]
  Result = PAST
  [11:26:21.24] BBClean.cmd: [20 x] CTOError.flg is detected at the end of the process of BBV...

  solved this problem by downloading and installing SP2 and all updates platform (108 total)