Compaq dc7800 CMT: PCI and PCIe versions

Similar Questions

• want to update driver VGA for HP Compaq D530 CMT (tower)

  Hi every 1

  I have HP Compaq D530 CMT

  the old version of vga driver

  Intel Graphics Driver

  This version of 6.14.10.4396 for the year 2005

  I have Win xp

  can I get the link for the upgrade that ty driver for all your help

  Intel supports more your chipset and your Windows XP in 2005. The latest graphics drivers for Windows XP is "pilot: 6.14.10.4396", which is the same that you are running.

  Readme for Build 4396

  Release notes for build 4396

  Download Build 4396

  Frank

• Compaq dc7800: DC7800 CPu id and BIOS update probem

  Hello

  My first post here, I hope you get what I'm trying to say.

  Well, I have this old compaq dc7800 sff and I managed to level it's OS to Windows 10.

  And now, I would like to update its bios and CPU id, but I can't run those exe, I downloaded on the cd7800 support site.

  I know that these bios update programs and so forth are not published for Windows 10, but I thought that windows7 versions would work.

  But they did not.

  For some reason, I got the the messege that "software publisher has refused to run this program on this computer.

  While this mean?

  I can't run these programs even with administrator privileges, I get the same messages?

  Because of Windows 10? Or what?

  The reason why I came across this problem was that I tried to update the CPU of the Q6600 to Q9550 and I got the error of CPU - ID firmware.

  Hello:

  It is very easy to update the BIOS on a dc7800 without being under Windows.

  In the menu of the BIOS on the file tab, there is a rom flash system command.

  All you have to do is put the BIOS files on a USB stick formatted with the FAT32 file system.

  Rather than go though all the steps to get the BIOS files, I've zipped or less than joint under attachments.

  Unzip them and copy the content of the file of the folder (not the folder), for your USB flash drive.

  Plug the flash drive into your PC and restart it, tap the F10 key to access the bios, select the file menu and on this list will be a rom flash system command.

  What to choose, and the PC will 'see' the files on the flash drive.  Follow the instructions on the screen to Flash the BIOS.

  I have attached files to the latest revision of the BIOS (1.32 Rev. A (6 Dec 2011)).

  If you still get the microcode error after updated the BIOS with the latest version, let me know, because then update the firmware, and it is a much more complex process.

• HP Compaq DC7800 small form Fa: Nvidia GeForce 8800 GT 512 MB vs. HP Compaq DC7800 Small Form Factor

  Hello

  I'm not too familiar with the hardware upgrades, so I wonder if a Nvidia GeForce 8800 GT 512 MB would be compatible with my HP Compaq DC7800 Small Form Factor?

  Thanks for any help!

  Hello:

  Here is the link to the plug for the GeForce 8800GT...

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-8800-GT/specifications

  Certainly, this card will not work in your machine for two reasons.

  1. he needs a power outlet extra that doesn't have food dc7800.

  2. the draw of the power of the card (105W), is too much for the PCIe x 16 slot 25W prorated and 240W power your PC.

  These PCs is designed for light desktop for administration.

  If you want to add a video card, it must be a down a profile that comes with low profile brackets in the area.

  I recommend the AMD HD 6450 or Nvidia GT-610 low profile cards that will work within the limits of the power supply of your PC has.

• graphics card for HP Compaq dc7800

  I am looking to buy a graphics card for my HP Compaq dc7800 small form Factor PC, I would like to have cheap cards. What would you recommend.

  Hello:

  You are rather limited with 240W power.

  I would get an opportunity low profile ATI Radeon 2400 HD 256 MB PCIe card on eBay.

  This Dell card I posted should work just fine.

  http://www.eBay.com/ITM/Dell-ATI-Radeon-HD-2400PRO-320-5891-/280798788349?PT=PCC_Video_TV_Cards & Hash = item4160e97afd

  If you want that a new map of low profile with HDMI, you can check the link below for the Radeon HD 6450. But make sure that the card you get comes with support for low profile and read the comments on some of these cards where they say the basket of pins VGA closing case.

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene & N = 100006662 & IsNodeId = 1 & Description = % 206450 HD & Bop = and & Order = Rating & PageSize = 20

  If you get a card with HDMI output, it will disable your onboard video, then reboot the PC after loading the drivers for the card, go into the BIOS and in device configuration menu, change the integrated audio system setting from disabled to enabled. Save the setting here and even once, when you go out. Then get you your integrated audio system and have also audio HDMI if you need.

  Paul

• Convert Compaq 7100 CMT from XP Pro to Windows 7 Pro.

  Title: Convert Compaq 7100 CMT from XP Pro to Windows 7 Pro.

  Hello everyone. The Windows XP Pro on my Compaq 7100 CMT is replaced with Windows 7 Professional (32 bit) using a system OEM disc that I bought in a PC shop. The computer is 3.2 GHZ Intel Pentium 4, 2 GB ram, HDD with a 320 GB Seagate 7200 RPM ATA serial / min. plug some additional computers, Compaq 7100, WCL PP255US, s/n system {removed privacy}, {removed from privacy} inventory number Council ch h 0968, bios hp 78 1 v01.05 16/06/2004. Physically disappears the 40 GB hard drive with XP Pro and the 320 GB drive (currently 1 player) will be used as drive 0 and Windows 7 Pro is installed. He probably won't be partitioned into two drives. A Windows 7 Upgrade Advisor report was generated for this computer, and is the main concern of this report, "virtualization technology is not supported, this PC does not support hardware virtualization assisted". As you know that this statement refers to the XP mode which is optional for Windows 7 Professional.  My question is what material makes this PC not support for virtualization technology, and this PC can be modified to support the necessary hardware. I'm a novice at this sort of thing so maybe I do not understand what that means here the report. In addition, another concern of mine is how will the PC really run Windows 7, it will be too slow for example. I would appreciate your help and comments.

  Thank you

  Oscar

  Hey, Oscar:

  There is no processors VT supported for the dc7100, so activation of VT in this machine is not going to happen.

  If you have integrated Intel card, is not entirely Windows 7 or Vista capable.

  Here is the link to a graphic driver for laptop that will allow the graphics acceleration and a change in screen resolution, but you won't have Aero under any circumstances.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=2096&swLang=8&mode=2&taskId=135&swItem=ob-47264-1

  You download and run the install file. It will be the error. Close the error window.

  You will need to manually install the driver by clicking on the VGA adapter in Device Manager. Click on update driver driver. Select travel it my computer for the software method and navigate to C:\SWSetup\sp34749. Make sure that the include subfolders is selected and the driver should install.

  Otherwise, you can buy a video card compatible windows 7 (PCIe x 16 2.0), who will work in your diet 345W specifications.

  Paul

• Compaq dc7800 not DETECT in bios network controller

  Compaq dc7800 not DETECT in bios network controller when worked fine yesterday

  Hello:

  If I clear the CMOS and see if the PC learns the material.

  If this does not work, I have to assume the on-board NETWORK interface has failed and you need to add a PCI or PCIe NIC card.

  Please see the below troubleshooting guide, annex B, page 60.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c01162207/c01162207.PDF

  Paul

• hp compaq dc7800 (DDR2 or DDR3) graphics card

  Hello

  I have a minitour computer hp compaq dc7800 convertible. I want to develop it with a graphics card. I see my computer has a PCI Express x 16 slot. Does anyone know if the card must have the DDR2 memory? Or the graphics card could be DDR3?

  Thank you

  Marc

  Hi Marc,

  The type of Ram on the graphics card is not dictated by your PC, so you can quite happily fit a card with DDR2, DDR3 or DDR5.  The important factors to consider are the power requirements of the graphics card (that is, if you choose a card that requires a 400W provide you would need a unit of power supply in your PC that can deliver this) and that the card physically fits inside the tower.

  Best wishes

  DP - K

• HP Compaq dc7800 Convertible M: CPU update for HP Compaq dc7800 Minitour Convertible

  I have a hp dc7800 cmt computer intel core 2 duo e6550
  
  I bought Brosissour e8500
  The installation seems to me that the problem
  "microcode update error".

  Hello:

  The E8500 must have worked.

  I suggest that you update the BIOS to the latest version.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3459248 & swItemId = vc_97114_1 & swEnvOid = 4059

  Since you are using W8.1, you will have to flash the BIOS using the method based on the BACK.

  Not only run Windows based BIOS flash.

  Before update you the BIOS, remove all that that can be connected to the PC, except the keyboard, mouse and monitor.

  There is a flash ROM control system contained in the file menu in the BIOS.

  You will need to format a Flash DRIVE with the FAT32 file system.

  Download and run the BIOS to support dc7800 page was last updated.

  An information page will open and show you the different methods to Flash the BIOS.

  What you want to do is to use the instructions F10 Setup of the BIOS flashing .

  This article, you click on the blue link BACK Flash directory and this will bring you to the bottom of the page to another blue link that is labeled View of BACK Flash content folder.

  Copy the contents (files) in the folder flash BACK to your USB.

  Plug the USB key into one of the front USB ports.

  Restart the computer and press the F10 key to enter the BIOS.

  Select the file Menu.  Then in this menu, there is a Flash ROM of system command.

  What to choose, and then select USB and PC should see the files on your USB flash BIOS.

  Follow the instructions to update the BIOS.

• How can I correct "processor not valid update firmware" I have a compaq dc7100 cmt

  My m/c is a HP Compaq dc7100 CMT (DX438AV).

  I replaced the processor 2.8 with a P4 HT 3.4 ghz 1 M/800 SL7PY, when starting, it gives the message "missing or not valid processor microcode update.

  My motherboard is ch h 0968. My Bios is...  Version: 786 1 v01.05

  I looked at the form of the Commission and I think that it supports this chip, can anyone help with this problem

  Thank you...

  Thanks for the help, I installed this firmware and also updated the bios to lasest 2.12 (I think)

  and the problem is solved

• HP Compaq dc7800: can I install SSD on HP Compaq dc7800 Minitour Convertible?

  Hello

  Can I install SSD on HP Compaq dc7800 Minitour Convertible?

  Should I notice something special in this SSD buying?

  I need to by a "cage" for the SSD?

  Hello:

  A problem you will have, is that there will be no support on this model, which means that you will not be able to optimize the drive SSD TRIM.

  This is because the PC has only two parameters of the disk controller... RAID and IDE.

  Support RAID TRIM is not introduced by Intel until the 7 Series chipsets came out.

  Yours has a 3 series chipset.

  That's the only reason why I have not put an SSD in my dc7800.

  Another problem you may encounter, it's that my dc7800 rejected all the sata III drives I have installed unless it's a SATA III which came with a HP PC.

  I had to take the disk of 1 TB SATA III out of my Elite CMT 8200 and exchange with the one I bought for my dc7800 because she had the symptoms listed in this HP newsletter below...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3718645&calledBy=&AC.admitted=1379354458533.876444892.199480143&docid=emr_na-c02711513-3&docLocale=

  I first thought the WD Caviar Black drive I bought was defective and I returned it.

  When the spare drive did the same thing, I understood that there was some sort of compatibility issue and came across the above document.

  Bottom line... I didn't do it.

• Clean the OS install on HP Compaq dc7800p CMT - which drivers/software for HP?

  Gentlemen.

  I decided to first try the road at low prices and to order a recovery disc Vista professional instead of a copy of Win7 for my HP Compaq dc7800p CMT with Intel Core Duo E6550 2.33 GHz processor, 1 GB of DDR2 800 MHz RAM and HARD drive retail 80 GB sata.

  I'll have to download drivers and software from HP and there is such an astonishing array of software available for this model I don't know really what to download and what I can let it slide.

  This is designed to be a professional computer maintained by computing professionals, but I just want what he as a general-purpose computer "ordinary".

  Now I tell myself that I should get certainly all drivers because they are strictly based on the material and will also apply to my needs to those of the original unit office drone was designed for. I just discovered, in cases where there is more than one choice of material, what advice or feature of this particular machine has to obtain the correct driver.

  But sometimes to wonder if, as Vista will be installed on a HP reinstall drive, has the disc still a library of drivers HP to replace the more generic drivers that can come from a MS retail disk, which makes it unnecessary for me to download drivers HP. I doubt it, but it is best to ask.

  The BIOS is less obvious. I think that there is a BIOS version that is newer than the one currently on this machine (786F1 v01.04). I've heard several philosophies on the BIOS updates: one is, 'if it ain't broke, don't fix it. " Just replace the BIOS if there is a problem (s) it might lessen. The other school says you should always have the latest version of everything, even if it not is not the current problems. So, should I get the latest version of the BIOS?

  I have no idea what ' ME ' designated operational entities and firmware if I should worry about this.

  Also less obvious is the software designed for increased security, seamless integration with an enterprise network and generally make it easier for the IT guys earn their salary. I don't know what, if any, utility most of these things would provide in my situation. If there is no hardware on the system which would "complain" If a particular piece of software was not installed, then for the stability of the system, I do not want to have even if I never use it.

  I know I ask much, here, but Paul Tikkanen in response to my initial post on this computer, mentioned a few BIOS settings that may be to my advantage. I'll use these suggestions and all that more that can take this machine more pleasant to work with my circumstances.

  Sorry... Just one thing. The descriptions I've read of this computer say she a dial-up modem 56 built-in of k, but it is referred to as a 'soft' modem It applies to a sort of virtual modem that exists only if the driver for it is installed? When I ran HP Insight Diagnostics, a sort of device LAN has been entered, but not modem. I have a dial-up modem, believe it or not. I just downloaded the SP3 for Vista and it took about 21 hours! Ridiculous, but it prevents me from wasting time on the cat and pornography videos.

  Thank you for your interest!

  Grant

  GHagen wrote:

  Gentlemen.

  I decided to first try the road at low prices and to order a recovery disc Vista professional instead of a copy of Win7 for my HP Compaq dc7800p CMT with Intel Core Duo E6550 2.33 GHz processor, 1 GB of DDR2 800 MHz RAM and HARD drive retail 80 GB sata.  Using the recovery disks is the best way to go.  Find drivers for Win 7 cannot be that simple.

  I'll have to download drivers and software from HP and there is such an astonishing array of software available for this model I don't know really what to download and what I can let it slide.  There is a page of software and the drivers of the computer.  You can install all the drivers on this page.  If the driver does not need to be installed the system will tell you.

  This is designed to be a professional computer maintained by computing professionals, but I just want what he as a general-purpose computer "ordinary".  Here is the technical reference Guide for your computer.  It has all the information you might need.  In some sections, it has all the models listed.  Just look at the CMT.

  Now I tell myself that I should get certainly all drivers because they are strictly based on the material and will also apply to my needs to those of the original unit office drone was designed for. I just discovered, in cases where there is more than one choice of material, what advice or feature of this particular machine has to obtain the correct driver.  As I said above, the page of the software & driver will tell you what it takes.

  But sometimes to wonder if, as Vista will be installed on a HP reinstall drive, has the disc still a library of drivers HP to replace the more generic drivers that can come from a MS retail disk, which makes it unnecessary for me to download drivers HP. I doubt it, but it is best to ask.  Yes, the majority of the drivers is installed during the recovery.  You need to update the drivers.  You can run Windows Update to get updates.

  The BIOS is less obvious. I think that there is a BIOS version that is newer than the one currently on this machine (786F1 v01.04). I've heard several philosophies on the BIOS updates: one is, 'if it ain't broke, don't fix it. " Just replace the BIOS if there is a problem (s) it might lessen. The other school says you should always have the latest version of everything, even if it not is not the current problems. So, should I get the latest version of the BIOS?  My theory is, don't update the BIOS if it does not solve a problem you are having with a component.  A failed BIOS update makes a good door stop.

  I have no idea what ' ME ' designated operational entities and firmware if I should worry about this.  Firmware is the software that tells the operating system do with a component, as for example a drive opticlal (CD/DVD drive).  Windows Update can also be found for you,

  Also less obvious is the software designed for increased security, seamless integration with an enterprise network and generally make it easier for the IT guys earn their salary. I don't know what, if any, utility most of these things would provide in my situation. If there is no hardware on the system which would "complain" If a particular piece of software was not installed, then for the stability of the system, I do not want to have even if I never use it.  Most security software are not a necessity for the system to function properly.  However, it can be a problem if you have a virus or malware.

  I know I ask much, here, but Paul Tikkanen in response to my initial post on this computer, mentioned a few BIOS settings that may be to my advantage. I'll use these suggestions and all that more that can take this machine more pleasant to work with my circumstances.

  Sorry... Just one thing. The descriptions I've read of this computer say she a dial-up modem 56 built-in of k, but it is referred to as a 'soft' modem It applies to a sort of virtual modem that exists only if the driver for it is installed? When I ran HP Insight Diagnostics, a sort of device LAN has been entered, but not modem. I have a dial-up modem, believe it or not. I just downloaded the SP3 for Vista and it took about 21 hours! Ridiculous, but it prevents me from wasting time on the cat and pornography videos.  Here is an explanation of a sweet (a software modem).

  Thank you for your interest!  You are welcome.

  Grant

  If you have any question, feel free to ask.  We will be there for you.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• pouvez ATI RADEON X 1550 compatible to hp compaq dc7800 sff

  IM planning to buy a vc that atleast can run 3d games slowly.

  Can ATI RADEON X 1550 compatible to hp compaq dc7800 sff?

  Here is the specifications is:

  Operating system: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Compaq dc7800 Small Form Factor
  BIOS: Default system BIOS
  Processor: Intel (r) Core (TM) 2 CPU 6320 1.86 GHz (2 CPUs), ~1.9GHz
  Memory: 3072 MB RAM
  Available OS memory: 3042MB RAM
  Page file: 1651MB used, 4430 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode

  and if its compatible. How can I disable the integrated vc? and if not, can you suggest a good vc compatible in my system unit?

  ---------------
  Card name: Intel(r) Q35 Express Chipset Family
  Manufacturer: Intel Corporation
  Chip type: Intel GMA 3100
  DAC type: internal

  Hello:

  The info that I could find, X 1550 can develop 27W power, which is very good for your PC.

  So, if you have one, all about the pose that will fit in your case, then it should work without problem.

  Why not opt for a more modern card and get a Radeon HD 6450?

  This is the map used in the 8200 Elite SFF that has the same power 240W.

  He would use the subject of the same power - or even less.

  Just make sure that you get a low profile with the extra-thin bracket card.

• HP Compaq DC7800 Desktop PC Core 2 Duo 2.33 GHz 4 GB 1 TB drive HARD Windows 7 Professional 64-bit.

  Trying to determine the type of memory on

  HP Compaq DC7800 Core 2 Duo 2.33 GHz 4 GB 1 TB drive HARD Windows 7 Professional 64-bit.

  before buy you from Mewegg.  Thank you.

  Hello:

  I don't know what size you want chips.

  I installed 4 x 2 GB in my dc7800 CMT running W7 Pro x 64 and maxed out for the 8 GB, it can take.

  http://www.Newegg.com/product/product.aspx?item=N82E16820231207

• HP Compaq DC7800: Seagate 1 TB hard drive would run smoothly on my pc?

  I use desktop core 2 duo Hp Compaq DC7800 with 2 GB of ram.
  Now, I intend to improve 320 GB to 1 TB of hard drive (Seagate Barracuda 1 TB 7200 RPM ST1000DM003 / MIN 64 MB Cache SATA 6.0 GB/s 3.5).
  -It would run smoothly on the system?
  -Is a good choice or 512?
  -This particular model of hard drive of another company?

  Hello:

  It is not the size of the hard drive.  In this model, you can go up to 2 TB.

  It is the speed of the drive that may conflict with the dc7800.

  Disks SATA 6.0 GB/s can have the problem that is described in the above-mentioned document, which mine had.

  If you don't want to take the risk of what happens, you have to get a SATA II (3.0 Gbps) drive, and they can be hard to find these days.