Compaq Evo W6000 workstation question

Similar Questions

• Compaq Evo graphics card question

  Hello

  Recently we gave me a Compaq Evo D500 or D510 CMT opportunity, not sure which, but it looks like this: http://www.computronicsdistribution.com/images/Compaq_Evo_D510_Tower.jpg

  I wanted to update the video card which is the following: http://cdn3.ioffer.com/img/item/104/527/401/VDve.jpg

  for maybe a 32 MB card. The computer is currently the operating system Windows 2000 w / SP4 installed.

  The reason for the upgrade is that I tried to install games on it for my mother to play and it seems most have compatibility issues. I guess it's the video card or drivers (I have drivers installed already). I thought it would be a sure way to make all the games to play correctly. The computer is pretty much only used for these games and is not yet online. Any help would be useful.

  Thank you

  Eric

  It's an old AGP card that can run in a slot 3.3 v or 1.5 v and I saw that the motherboard is a 1.5V AGP slot, so pretty much any AGP card will work. If you have any type MOM computer stores and pop in your town I would go to one and ask them if they have an old school used AGP cards. You could switch to something like a card GeForce2 or GeForce3, which should cost only a few bucks now.

  Here are 2 ebay auction for what I'm talking about:

  eBay

  eBay 2

  It would also be useful to know what games you are talking about. They have specific minimum specifications. I might also suggest that the upgrade to Windows XP would be a good idea. Windows 2000 was not a good gaming platform and Windows Xp handles much better 3D graphics.

• Compaq Evo D300: Multimedia Audio controller drivers/Codecs

  Compaq IT support/Codec.

  Dear community of Compaq.

  I was informed by the Intel online community to contact Compaq for Codecs that are not themselves. Can you please help me by providing the necessary driver/Codec below?

  The Intel answer/advice for me and my original question which is lower. Thank you very much.
  Mr. Bennett

  Intel community advice

  "The device that you identified is the Intel high definition Audio interface. The driver you need really need is not for the interface itself, but for the media Codec that completes the circuit. Intel cannot help you with that. they do not have these Codecs. You must contact the Board vendor for the correct driver. »

  My original Question from Intel

  "Dear community.
  Can someone help me find a driver "Multimedia Audio Controller" for the "Compaq Evo D300" PC?
  Exact model: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=92161 & lang = to & cc = us
  "077Ch" is the main map.
  Company and feature:
  VEN 8086
  DEV 2445
  I've upgraded to Windows 7 from XP but I think that Intel don't do drivers more for this PC.
  I would be very grateful for help.
  Thank you.

  Mr. Bennett"

  Thank you.

  Mr O Bennett

  You are the very welcome.

  I mean, it is explore you the file and select with the mouse, then click Next and it should install the driver

  You cannot copy and paste anything.

  You can first try this method easier to install the driver...

  When you arrive at her browse my computer for driver software option, go to: C:\SWSetup\sp27103, make sure that the include subfolders is selected and see if the pilot goes like this.

  The original file that I gave my instructions has the hardware ID you posted, so you need to install the driver (8086-2445)

  [AnalogDevices]
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00070E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00080E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00090E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000B0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000C0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000D0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000E0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000F0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00100E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00880E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00890E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008B0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008C0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008D0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A50E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A60E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A70E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_SPINNA, PCI VEN_8086 & dev_2445 & subsys_000A0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_SPIDER, PCI VEN_8086 & dev_2445 & subsys_008A0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_124C103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_80101043
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_890D1509
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICH_H, PCI VEN_8086 & dev_2445 & subsys_1274103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126E103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126F103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_1279103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_127A103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_AMAZON, PCI VEN_8086 & dev_2445 & subsys_806A1043
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3084109F
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3181109F
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_80761043

• Compaq evo n610c does not start

  On May 7, 2010 my Compaq evo N610c would boot is no longer using a battery 1 years and a power adapter c bought the same year (2009). Without battery back installed and using only a c power, I noticed that the front battery light flashes constants 8 consecutive flashes. Installing battery below with a trendy c, the indicator light flashes 8 times once then stops completely. No boot or indications of electricity except the 8 consecutive flashes. How can I fix this problem with your technical help?

  Do all very simple, basic stuff first and don't complicate questions take your time, this is a must. Take a rest if nessessary. Then go back to the difficulty of the laptop not operating, disconnect the laptop from the wall. Then remove the battery, memory (ram) chips and then remove the hard drive. Then reconnect the power cord for your laptop computer and the wall outlet. So, or if you receive the same light that flashes in the battery of the portion of front indicator along while your laptop is connected then finally power, it could be the small battery watch itty-bitty plugged into your motherboard the fancy name for it is the battery CMOS. Find it and take it out... Wait a minute! Reinstall the battery itty bitty. Your laptop should start, if other difficulties with any operational material occurs, spend 5.00 to buy another battery to your local convince store. Take your computer before hand to a technician for repair will cost you at least $180 and they tend to feel guilty to charge you that much either... Just for $5.00 battery replacement. See, I answered my own question taking my own time-same guy who wrote the community for technical assistance. Thanks to all and you're welcome.

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• Network for Compaq Evo D51C Windows 7 driver

  I'm looking for a network driver for a Compaq EVO D51C running Windows 7. Any help would be appreciated.

  Hello:

  Someone added an ethernet card in your machine...

  Download and manually install this driver.  The first on the list.

  Hit the Green click to the download button, and then it takes several seconds to load.

  http://www.Atheros.cz/Atheros-network-download.php?chipset=50&system=5

• Old Compaq Evo N1020V, replace the hard drive on the SSD

  Hello
  I wanted to extend the life of my old Compaq Evo N1020V Intel P4. I bought a Transcend SSD TS32GSSD25-m, connected to the computer, I have updated the BIOS to the latest version available F.0B January 24, 2007. Unfortunately, when the computer starts the message: 0200: failure fixed disk 0
  Is it possible to connect the SSD drive to the old computer?

  I see that now.

  You initialize the drive using the FDISK utility? If it is not initialized it would not even necessarily considered gift.

  Installation of an operating system on an SSD, this isn't the same as it is with an electromagnetic drive legacy.  It is a little involved with an old SSD OCZ Vertex and enough conversely simple with a Corsair SSD upgrade kit. I own both. The upgrade of the Corsair was as simple as with the SATA supplied to the usb connector and software cloning with that also it was delivered.

  To do a bit of research I saw that there is not much in material information facility available on the web for this particular SSD. Maybe the transcend technical support would have been a better place to look for info on the installation. Transcend would have supported their product. The post that is marked as the solution is not correct. It is as you say a disc SSD PATA. It must have worked. the problem seems to be more a problem installation or a failing Transcend SSD drive. return the drive for a replacement and try again.

  Best regards
  ERICO

• Recovery of Compaq Evo N610v

  Compaq Evo N610v

  She is a hot RECOVERY key?
  Which one?

  If in case he doesn't have this feature, is an available recovery disk?
  Available for download?
  Or buy?

  Thank you.

  This web document describes all the recovery options available for the EVO N610V.

  The age of the laptop EVO N610V makes very little probable that you will be able to find recovery discs. I found a seller that sells laptop recovery disks. Do a Google or Bing search to find the game of recovery Compaq EVO N610V diskettes.

  You would be better using a Windows XP installation disk and do a clean install of the operating system if the license activation key 25 characters is always visible on the sticker attached to the bottom of the laptop. After eight years he is perhaps more visible, unless someone put on transparent tape.

  You can get all the drivers from here. http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=316666&prodTypeId=321957&prodSeriesId=316664&swLang=8&TaskID=135&swEnvOID=1093

• Compaq Evo N1015v: On Compaq Evo N1015v wireless network card?

  Compaq Evo N1015v

  Is there a LAN card wireless on this laptop?

  We have wifi at home.
  All laptops, including a Presario can be connected to internet by wifi, but the Evo N1015v.
  Simply, it doesn't show any wifi signals.
  Hope to have the Evo N1015v connected to wifi, but how?
  Help please.

  Thank you.

  Your old model doesn't have a wifi. It has been manufactured in 2004.

  You will need to use a usb dongle or a PC Card, a wifi adapter Type II to enable wireless on your laptop EVO.

  Wifi PC Card adapter a Type II are more manufactured. You can get one in a shop of second hand or a flea market.

  Ensure that the usb dongle that you consider taking care of Windows XP.

• mouse cursor Compaq evo

  Hi I amstill having trouble with the cursor of the mouse and touchpad it will not move on the side of the screen only upwards and downwards. I tried the ps2 mouse and series it even. bought a laser wireless mouse installed it can move the cursor across the screen put it next jumps as he fixed elastic. I'm running xp pro tried another hd with win2000 is the same so it does not win xp it must be something elsecan someone help.robin

  Hello

  Thank you removed Touchpad to check finds it right blue button was stuck block cleaned and given keys and cursor back to normal. Maybe you can help with my other computer compaq evo n620c laptop it boot in the bios, and then when he tries to load windows it keep restarting or restarting.robin

• Windows 7 audio driver for compaq evo

  I have a compaq evo d510 sff and I installed windows 7, but I can't install or update the audio drivers, and one on the compaq/hp website does not work on windows 7. Anyone know how to fix this so that the sound is working or where can I find the driver?

  Thanks in advance

  The answer is simple and easy. Just take the following steps:

  1. Download and unpack the Windows XP driver from HP's website (http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316517&prodNameId=97130&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=hd-17950-2).
  2. Locate Setup.exe. If you kept the default unpacking options, it should be in C:\swsetup\SP27103
  3. Right click on Setup.exe and select Properties
  4. Select the compatibility tab
  5. Check the box for "Run this program in compatibility mode for Windows XP"
  6. Check the box for "Run this program as administrator"
  7. Apply the changes and exit the Properties dialog box
  8. Run the Setup program
  9. Take advantage of your integrated sound card, as it was supposed to be enjoyed.

• Compaq Evo Notebook - hard drive problem

  Hi eveyone,

  I bought a Compaq Evo Notebook online on eBay two years ago. Yesterday, I went to use it on and got an error of the controller. So I moved the computer and noticed the my cat peeded and he went under the computer and go to some of them in the area of the hard drive. I quickly turned it off and took apart and gently he cleaned with wet towels and let rest overnight with dehumidifiers. I then put together around noon and the computer will not start past the compaq logo, but when I took out the hard drive and tried to see if it would start past the logo, what he did and when I put a CD/OS-Ubuntu and it went to the operating system install screen (since it has an option from the CD). Anyone know what I can do to be able to at least install Ubuntu, rather than start from the CD or recover windows XP.

  Thanks for any help provided.

  Andy

  It seems that the hard drive has been damaged by the cat wee, you can buy a usb hard drive adapter and connect it to another PC, see if it will be displayed in the Solution Explorer, if it copies your files off quickly.

• Compaq evo d5s freezes constantly

  I have reloaded Win XP on a Compaq EVO D5S, Ram 640 MB and P4 1.6, but when using the high system and mouse freezes.

  Need for a solution to remedy

  You are the very welcome.

  I am pleased to read that you installed XP and works very well.

  Enjoy!

  Best regards

  Paul

• COM for Compaq Evo USB driver

  Hello

  I recently had to re - install windows on one of our computers, and of course, we did not have a driver diskette. I got most everything works but I can't find a driver for "USB COM.

  The computer is a Compaq Evo with XP Professional Service Pack 3 installed, S/N V311 KN9ZE292. My computer is labelled with a sticker that says "D51S/P253/40/K/512d US". Unfortunately the HP drivers and support site does not seem to recognize a 'D51S' model, but I was able to find the drivers to work a model called "D510 Small Form Factor". I used this site to find drivers.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=97130&PR...

  By using this site, I found the drivers for everything but the USB com I tried to use the Driver Intel USB 2.0 available on this site. When I install it, my mouse was subsequently no longer works, and once installation is complete, it asks me to restart the computer. After the reboot, my mouse works again, but a window pops up saying new hardware has been found, it tries to install the USB drivers but fails. I also tried to install the Microsoft Windows XP Fix for the problems of USB 2.0 driver (Q826959) available on the website, with similar results (except the mouse continues to work through the installation process).  I don't know if I have good model or if something else is happening, but I could use some help.

  Thank you!

  Hello:

  You have the right model. It's a desktop HPQ Evo d510 small Form Factor (SFF) PC.

  I don't know why the fall out of the zero and don't put D51 the S means SFF.

  If you have not already done so, install the chipset driver.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=316517&prodNameId=97130&swEnvOID=1093&swLang=8&mode=2&taskId=135&swItem=PSG_I20521-104339

  You don't need USB 2.0 driver if you are using XP SP2 or 3.  It was only for older versions of XP with no native USB 2.0 support.

  If you continue to have trouble getting this to work properly, I suggest that you spend $10 and stopped a quick restore disc, set on the PC, which is in charge of all the drivers and the operating system in less than 30 minutes and you are done. Then you can install SP3 over that and all the updates you need.

  1. Enter the part number and the serial number on the top of the computer on the Silver label. The model # is a HP-Compaq d510, but the part number is on this tag silver under the serial No.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone. Some simply ask for the serial No., some want at the same time, or they'll want just the serial number and the type of computer (d510).

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. You will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  If you live outside the United States or Canada, contact HP for the country that you live in the link below.  If they have a separate number for business PC call this number. You will need to provide the same information as above. Cost will vary from free to more than $10, depending on which country you live.

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Paul

• Compaq Evo n800 RAM upgrade

  I want to spend 512 to 1 or 2 GB of RAM.  HP "memory finder" does not list the Compaq Evo n800c (8 years ago), but how do I make sure I get the right replacement? Reference number?  PC 2100 2533 D Z s (the zeor could be had of).

  appreciate being pointed in the right direction.

  See you soon.

  Hello

  GrahamRoss wrote:

  I want to spend 512 to 1 or 2 GB of RAM.  HP "memory finder" does not list the Compaq Evo n800c (8 years ago), but how do I make sure I get the right replacement? Reference number?  PC 2100 2533 D Z s (the zeor could be had of).

  appreciate being pointed in the right direction.

  See you soon.

  Here is a link to the Quick Card on your laptop.

  Here is a Google search, I did memory upgrades for your laptop.

  The trick is to buy only compatible RAM guaranteed. Some have a lifetime guarantee.

  Best regards
  ERICO