mouse cursor Compaq evo

Similar Questions

• Compaq Evo D300: Multimedia Audio controller drivers/Codecs

  Compaq IT support/Codec.

  Dear community of Compaq.

  I was informed by the Intel online community to contact Compaq for Codecs that are not themselves. Can you please help me by providing the necessary driver/Codec below?

  The Intel answer/advice for me and my original question which is lower. Thank you very much.
  Mr. Bennett

  Intel community advice

  "The device that you identified is the Intel high definition Audio interface. The driver you need really need is not for the interface itself, but for the media Codec that completes the circuit. Intel cannot help you with that. they do not have these Codecs. You must contact the Board vendor for the correct driver. »

  My original Question from Intel

  "Dear community.
  Can someone help me find a driver "Multimedia Audio Controller" for the "Compaq Evo D300" PC?
  Exact model: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=92161 & lang = to & cc = us
  "077Ch" is the main map.
  Company and feature:
  VEN 8086
  DEV 2445
  I've upgraded to Windows 7 from XP but I think that Intel don't do drivers more for this PC.
  I would be very grateful for help.
  Thank you.

  Mr. Bennett"

  Thank you.

  Mr O Bennett

  You are the very welcome.

  I mean, it is explore you the file and select with the mouse, then click Next and it should install the driver

  You cannot copy and paste anything.

  You can first try this method easier to install the driver...

  When you arrive at her browse my computer for driver software option, go to: C:\SWSetup\sp27103, make sure that the include subfolders is selected and see if the pilot goes like this.

  The original file that I gave my instructions has the hardware ID you posted, so you need to install the driver (8086-2445)

  [AnalogDevices]
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00070E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00080E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00090E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000B0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000C0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000D0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000E0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000F0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00100E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00880E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00890E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008B0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008C0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008D0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A50E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A60E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A70E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_SPINNA, PCI VEN_8086 & dev_2445 & subsys_000A0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_SPIDER, PCI VEN_8086 & dev_2445 & subsys_008A0E11
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_124C103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_80101043
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_890D1509
  % * WDM_AC97AUD. DeviceDesc % = WDM_ICH_H, PCI VEN_8086 & dev_2445 & subsys_1274103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126E103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126F103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_1279103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_127A103C
  % * WDM_AC97AUD. DeviceDesc % = WDM_AMAZON, PCI VEN_8086 & dev_2445 & subsys_806A1043
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3084109F
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3181109F
  % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_80761043

• Wireless mouse cursor will blink and become useless

  Original title: problems with mouse cursors

  System: Windows XP, Compaq Presario 2100

  I prefer to use an external USB mouse. "Compatible USB and PS2 optical mouse wheel".

  PID: 56180-576-9149431-3 PIN: X 08-71118

  It works very well with my runing newest laptop Windows 7 and sometimes on the Compaq (as well as the mousepad). However, sometimes without apparent reason, the cursor flashes on and for most offshore, do any worthless pointing device.  I tried to review the settings of control panel device (withdifficulty) and everything seems fine. I also tried several different mouse; same result.

  I get a stable cursor to initialize to top, only up to the point where I select the user account to connect to. The pointing device then develops its own behavior.

  Any ideas?

  -Dan

  Well, you can try this:

  Go in start.

  Right-click Workstation,

  Then click on System Properties.

  It should open a window, click the hardware tab.

  Then click on the Device Manager button.

  Expand mice and other pointing devices section,

  Find your mouse, then right-click on it and click Uninstall.

  Restart your computer.

  When you log on to Windows, this should start automatically install the device software. Once it's done

  the mouse should work fine, without flicker.

• Compaq evo d5s freezes constantly

  I have reloaded Win XP on a Compaq EVO D5S, Ram 640 MB and P4 1.6, but when using the high system and mouse freezes.

  Need for a solution to remedy

  You are the very welcome.

  I am pleased to read that you installed XP and works very well.

  Enjoy!

  Best regards

  Paul

• COM for Compaq Evo USB driver

  Hello

  I recently had to re - install windows on one of our computers, and of course, we did not have a driver diskette. I got most everything works but I can't find a driver for "USB COM.

  The computer is a Compaq Evo with XP Professional Service Pack 3 installed, S/N V311 KN9ZE292. My computer is labelled with a sticker that says "D51S/P253/40/K/512d US". Unfortunately the HP drivers and support site does not seem to recognize a 'D51S' model, but I was able to find the drivers to work a model called "D510 Small Form Factor". I used this site to find drivers.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=97130&PR...

  By using this site, I found the drivers for everything but the USB com I tried to use the Driver Intel USB 2.0 available on this site. When I install it, my mouse was subsequently no longer works, and once installation is complete, it asks me to restart the computer. After the reboot, my mouse works again, but a window pops up saying new hardware has been found, it tries to install the USB drivers but fails. I also tried to install the Microsoft Windows XP Fix for the problems of USB 2.0 driver (Q826959) available on the website, with similar results (except the mouse continues to work through the installation process).  I don't know if I have good model or if something else is happening, but I could use some help.

  Thank you!

  Hello:

  You have the right model. It's a desktop HPQ Evo d510 small Form Factor (SFF) PC.

  I don't know why the fall out of the zero and don't put D51 the S means SFF.

  If you have not already done so, install the chipset driver.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=316517&prodNameId=97130&swEnvOID=1093&swLang=8&mode=2&taskId=135&swItem=PSG_I20521-104339

  You don't need USB 2.0 driver if you are using XP SP2 or 3.  It was only for older versions of XP with no native USB 2.0 support.

  If you continue to have trouble getting this to work properly, I suggest that you spend $10 and stopped a quick restore disc, set on the PC, which is in charge of all the drivers and the operating system in less than 30 minutes and you are done. Then you can install SP3 over that and all the updates you need.

  1. Enter the part number and the serial number on the top of the computer on the Silver label. The model # is a HP-Compaq d510, but the part number is on this tag silver under the serial No.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone. Some simply ask for the serial No., some want at the same time, or they'll want just the serial number and the type of computer (d510).

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. You will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  If you live outside the United States or Canada, contact HP for the country that you live in the link below.  If they have a separate number for business PC call this number. You will need to provide the same information as above. Cost will vary from free to more than $10, depending on which country you live.

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Paul

• Turn the mouse cursor

  This only happens when I visit Facebook, but the mouse cursor turns and will not stop. Firefox will never block or unresponsive, but it behaves as if there is always from my PC 'think '. Any ideas on how to stop my cursor to turn constantly?

  
  

• Mouse cursor freezes

  My mouse cursor keeps freezing upwards when I opened my computer, when he was asleep. To restart, I have to shut down the computer, then open it back up again. This has happened for the last couple of days and just started all of a sudden. What happens and why this phenomenon occurs? I have to consider if he looked somewhere? Thank you!

  Hi hill8302,

  Please visit Apple support communities.

  If your mouse cursor seems frozen after you wake up, your Mac from sleep, there are several troubleshooting steps to try first.

  I recommend starting with this hard reset -reset the management system (SCM) controller on your Mac.

  You can find more details that can help in If your Apple wireless mouse, keyboard or trackpad is not working as expected.

  All the best.

• The mouse cursor disappears on the address and search bars.

  In Firefox 10, the mouse cursor disappears from the address bar or the search bar after a certain time, or I guess that after visiting a site that I paste below. I don't see what part of the word I click on the address bar or the search bar for the correction because there is no mouse cursor. After clicking on tools and options cancel, the mouse cursor appears (I make no changes to the options) or when I click on customize in the navigation bar, then the icons I click on Cancel again without modification, and the mouse cursor appears again (as you can understand some trigger for windows option implementation even without change is done). I uninstalled firefox 10 just for this reason. Back to Firefox 9. Safe mode - same problem happens. So no problem addon. And the same thing happened in another operating system, so this isn't a fault of a facility.

  Problem solved for me in the last version of firefox v.10.0.1

• mouse cursor not active at the top of any Web site in firefox, please help me?

  Dear Sir.

  my mouse cursor is not active at the top of any website in firefox. but the cursor is active in the site to anywebsite and the cursor is also active in other site.example, oper, internet browser explore etc.

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Bookmark shortcut does not work if the mouse cursor is focused in the version of the flash plugin.

  I tried to open the bookmark panel shortcut [ctrl + shift + B] buttons when the mouse cursor is focused with the flash plugin. But it does not open. But I clicked on the page and he's trying again, he opens the bookmark panel.
  Try the following link
  [Example: https://learnable.com/courses/a-crash-course-in-mobile-web-design-195]

  This may or may not be a problem.
  It's just a suggestion...

  This is a limitation of the works in Firefox.
  
  If a plugin is developed, which makes this shortcut key is no longer so he treats all keys work.
  
  You have to click outside the plugin, if you need to use a keyboard shortcut.

• The mouse cursor disappears when iTunes movie go full screen

  This isn't a question... actually I found a hack solution to this bug and I wanted to share it with other people having the same problem.

  Since the upgrade of the OS X El Capitan, I'm having a problem with my cursor disappears randomly. It is very repetitive if I start a video in iTunes with the enlarged screen and the cursor disappears. Indeed, after entering mode full-screen, iTunes mask the cursor of the mouse that is predictable. The problem is that iTunes may not reappear there again once, for example, when I go to another office for a temporary job.

  Move the mouse does nothing, escaping mode full screen does not come back. It is very annoying. Like I had never had such a frustrating experience prior to a new installation of El Capitan 10.11.3 and update iTunes to 12.3.3, I thought that this is due to the update to iTunes. So, I made another new facility of El Capitan, this time without updating iTunes. But the problem still exists. It is interesting that I had this problem on my MacBook Pro 17 "end 2011 and not with my iMac 21.5" mid-2009!

  After a little research, I found that this bug is not because of El Capitan, and happened randomly in the other years dating back to Tiger and maybe before.

  Only new change I had made in my MBP Preferences system , was in the part of accessibility, and it was related to Zoom. I had always used this feature, but I put the Zoom Style 'full-screen'. This time (after the new installation of El Capitan), I had changed to 'Picture-in-Picture'.

  I changed the Style of zoom "full screen" even once, and the problem resolved.

  If this does not work for you, can be debilitating, other options, such as 'Use keyboard shortcuts to zoom' or 'Use of scrolling with keys of change to zoom movements,' can solve the problem.

  We all know that it is a bug, and he has been there for a long time. I found that many people had reported it to Apple, but the problem persists.

  For those of you who want to use the zoom "Picture-in-Picture" style, or set the zoom style full screen does not solve the problem of their mouse disappears, I will mention a few ways to recover the mouse cursor. The following solutions are applied to a mouse cursor disappeared after entering the movie to iTunes (or any other application) full screen.

  1. Move the mouse until the switching Office brings back the cursor. Now, you can switch the desktop computer and do whatever you want. (It's easier work, at least for me).
  2. Use Alt - Tab to switch to another program; This will bring the mouse cursor.
  3. Press Ctrl + F2 to activate the Apple menu. (You can also move your cursor away to top left and click to activate the menu.)
  4. Press Ctrl + up arrow (or swipe up with 4 fingers on the touchpad) to activate the control of the Mission.

  You can also find other ways to retrieve the cursor of your mouse.

  Hope this can help you with the mouse pointer disappears.

  In MBP El Capitan the pointer of the mouse is where you assign to ' picture in picture ' or 'full screen '.

  If you miss your mouse pointer, accessibility-> display "Shake mouse to locate" check to find your mouse pointer. It should be there.

  Note: you have posted in the discussion of the Mavericks, should have used the ElCapitan discussion...

• The mouse cursor moves on slow monition Dynadock U-related

  Hello

  I'll just borrow the subject to ask a question or an opinion on dynadock U.
  I have tecra S10 set to date, with win 7 32 bit Enterprise connected through dynadock you for external monitor AOC. Problem that I face is that my mouse (cursor) moves like on slow monition. At some delays just work with office (outlook or word), or surf the net - Explorer.
  As I said the two computer and dynadock are updated with the latest drivers.
  On dynadock are connected: two printers, keyboard, mouse, external HD and speakers.

  No idea how to fix?

  THX,
  marjaN

  Hello

  The same also occurs if the mouse is connoted to s for computer laptop USB port directly?

  Please check

• NB100 - mouse cursor flies around the screen

  Hello

  So, I bought the NB100 and noticed that something was not right but stupidly put upward with her for over 2 years. Now he is just really annoying as its happens more frequently and, possibly, gets worse!

  Randomly, the mouse cursor flies around the screen, by clicking at the opening programs and files, etc. The only way to stop it is to turn off the laptop holding down the power button. She also does when I plug in a usb mouse (and disable the touchpad) so I assume that it is not the hardware, but I have reinstalled as the driver...

  Usually, if I turn the laptop on its always crazy but if I start it in safe mode its fine. This made me think I had a virus but I did a scan and nothing shows.

  In addition, I don't think that turn it off by holding the power button down is very good for the system that sometimes, when I try to turn it back on, it doesn't load at all (just a black screen with the cursor).

  Help, please! I would be eternally grateful...

  Thanks in advance, Nadia

  need you pretty much time to fix. My advice is to reinstall Windows from disk image or hard drive recovery. Please, understand me, it's easier and quicker to reinstall rather try to fix it.

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• Satellite L775D-10W - stucks Boot: black screen + mouse cursor visible

  Dear supporters,

  Model: Satellite L775D-10W
  Operating system: Win7 64 bit
  Problem: The procedure start STRP stuck after "Windows load data" and a progress undertitled with 'Microsoft Corporation' bar, resulting a black screen and a mobile mouse cursor.

  The same problem occurs every time...
  pressing F8 > options (safe vaissaille mode) > start gets stuck
  Boot from DVD of Win7 64 bit > startup gets stuck
  Boot from DVD of Win7 64 bit > options > start gets stuck

  It is likely that the graphics card is broken or that the driver no longer appropriate?

  Thank you for your time in advance!

  Greetings

  Carpet

  Graphics card problem may be possible but in this case the POST (power on self test) would not be passed, and in my opinion, it is not possible to access the BIOS.

  However, it's just a theory
  Try to start Notepad using some Live CD like Linux

  I would also recommend to start the advanced boot menu. (by pressing F8) and choose repair my computer option.
  Then select Toshiba HDD recovery

  This option would be to recover the laptop back to factory settings.