Compaq Presario CQ5320F handle network can accelerate from 60mbs?

Similar Questions

• For what power factor fits in my Compaq Presario CQ5320F?

  I'm running a Compaq Presario CQ5320F with Windows 7. I want to put in a bigger GPU I installed now (A AMD Radeon HD 5450 Low Profile), so I have to replace my old a new supply. Power factor suitable for what to do?

  Here are the specifications of your Compaq Presario CQ5320F desktop computer. The power supply is a standard ATX PSU. The Corsair CX500 and CX600 are only slightly larger than the power supply HP stock and are known to adapt without problems. In addition, the CX500 and CX600 are highly recommended and favorite forum.

  Frank

• Compaq Presario 5400US - need network drivers for XP Home Edition. Wired connection.

  It woun't connect to internet using a good modem and cable (other PC connect successfully using this same equipment). When I type IPCONFIG, I get 2 results, one for Local Area Connection2 for LAC3. Two of them have 169.254.xxx.xxx IP addresses. Both Suffixes DNS blank and empty default gateways.

  When I go into network connections, the LAC2 says "Limited or no connectivity", but it lists a Linksys LNE 100TX Fast Ethernet Adapter. Linksys? I don't have any Linksys product. LAC3 says 'Connected' with the help of a WAN network driver. However, in the Notification area network connections has the same yellow triangle as LAC2. When I right click the icon in the Notification area and select "Repair" I always get the following ".." following action cannot be completed: renewing your IP address.

  If I right click LAC3 (the one that says 'Connected'), click Properties, click TCP. IP and select Properties, it is set to get an IP address and an address of DNS server automatically. It is also the same for LAC2.

  Client DHCP, DNS Client and call the CPP are started.

  I tried ipconfig/release, ipconfig/registerdns, ipconfig/flushdns, netsh winsock reset. When I run it ipconfig / renew I get messages (after he is sitting there for 2 minutes)
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...

  A run chkdsk /r have run the command netsh int ip reset reset.log.

  So, I went 2 network cards, restarted in the device and removed Manager and let Windows reinstall. Windows creates a new connection to the Local network (LAC4, 2 and 3 are gone). It only reads limited connectivity or none and is using Linksys LNE 100TX Fast Ethernet Adapter, like the previous LAC2. The previous LAC3, who uses the network never got WAN driver reinstalled. I don't understand.

  Since an adapter Linksys on a wired connection seemed odd I have tried to find what should be the correct network driver.

  I google "Compaq Presario 5400US" "driver ethernet" OR "network driver" and was taken to a page of drivers HP, which I think makes sense since HP now owns Compaq
  http://h10025.www1.HP.com/ewfrf/wc/s...UCT=93284#n430
  This page has nothing listed for network or chipset cards.  This, of course, has no meaning for me.

  Can anyone help?

  Select this version from the drop-down list on the link that I posted above.

  Depending on the size of file, it does not resemble an auto install file. Accept the agreement and unzip the file into a folder.

  So, download it to a folder and go to Device Manager.

  Click the network card in need of drivers, and then select manual search for drivers. Navigate to the folder where you extracted the drivers and the driver should install.

• Compaq Presario V6120US: Wireless network CARD not FIGURENT DO NOT IN the DEVICES MANAGER

  I have a compaq presario v6120us I can't get WiFi to work on. I tried to switch off wi - fi on and outside, I was going to try to go into the bios and put it on there, but there is no control for wi - fi in bios. When I try to find it in Device Manager, I see not listed. But I know there's a wi - fi connection because there the card inside, more there's a switch on to activate the wi fi. I consider me be advanced when it comes to computer repair, but I'm running out of ideas, and I would be very happy for any help, thoughts, or ideas as to what this might be.

  Thank you very sincerely,.

  Dennis

  Hi, Dennis:

  The motherboard in your model had issues due to run hot.

  One of the victims is that the power of the slot that plugs into the wireless card is lost.

  That's why the wireless card dropped out of sight.

  It probably is about your present dilemma.

  That's happened a lot with the dv6000/dv9000 motherboards that used the same chipset nvidia and AMD processor has your laptop.

• Compaq Presario CQ57-339wm: I can swap different CPU into a model motherboard Celeron?

  Hey all,.

  I have a laptop Compaq Presario CQ57-339wm requiring a logic board replacement. According to the sticker on the Palm, it has an Intel Celeron processor clocked to Interior.

  According to the CQ57, the motherboard service manual I ordered (reference number: 646177-001) is "for use only with the computer models equipped with an Intel Core i5 or i3 processor processor and a graphics subsystem with UMA video memory.

  Since I have a Celeron CPU and motherboard instead, would replace this motherboard for the work of the Board of Directors i5? I think that the mobo, I ordered does not include a processor i5, just the current Board. I could swap the chip Celeron of the old Council to the Board of Directors i5, or that wouldn't work either? I have to install a compatible rod that matches the part number of the old mobo? (646174 001).

  If it won't work, I return to the Commission, as I have not yet opened and order a compatible card. Moreover, if the installation of the Board of Directors will work, and I just need the compatible CPU, I could order one that would correspond to the reference, like this eBay i3.

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  I think that you understood. The Celeron and Core Intel models use a different motherboard with a different chipset and processors cannot be exchanged.

• Problem of PC keyboard laptop Compaq Presario CQ60-224NR after the upgrade from Vista to Windows 7

  I have recently upgraded the OS on my laptop PC Compaq Presario CQ60 224NR Vista Service Pack 2 to Windows 7 Home Premium 32 bit Service Pack 1.  I updated the drivers before upgrading and checked for the latest drivers after upgrade also.  After the upgrade, the keyboard of the laptop works only partially when I use a web browser.  This includes IE and Firefox.  Above the QWERTY keys do not work correctly.  If I press one of these keys or SHIFT and one of these keys, the last character, symbol, or space I typed before is repeated instead.  Y at - it a fix for this problem?

  Well, I searched for several hours and found a solution, at least for me I am a customer of Comcast and I installed constant guard.  There is a key logger that is included in the package that it causes the problem.  I uninstalled GuardedID and my problem disappeared.  I hope it works for you.

• Compaq Presario CQ1 1000: network drivers for Compaq Presario CQ1-1020 all-in-One desktop PC running Windows Server 2008

  Hello. I am trying to create an area of origin. I know I have to use more computers in the domain, but this is not the point. I was wondering if someone could help me find a driver for Server 2008 network for my computer (or someone could build one but I heard that takes a lot of effort). The original network driver has become unknown when I installed the operating system. I am also aware that I should use a newer computer for this but I can't afford to buy one now and I can't seem too creating a on a virtual machine. Also, I searched all over the internet and there are drivers for my computer, but not for the operating system I. Any help would be greatly appreciated. Thank you!
  
  P.S - computer is in the subject if you have not already guessed.

  Hello:

  It is possible that the file have not checked out pilots in their folder.

  To do this and then try to manually install the driver.

  Download and install this free utility for files.

  1 file listed is for 32 bit.

  http://www.7-zip.org/

  After you download and install 7 - zip, download and register but do not sp46403 run.

  Right-click on sp46403 and select 7 - Zip from the list of items.

  Have 7-Zip extract of: and leave it to decompress the file in the sp46403 folder.

  Then try to manually install the drivers, but navigate to location 7-zip extracts the sp46403 driver file to.

• Compaq Presario CQ5320F desktop PC will not read the recovery disc 1

  I ordered HP discs and received 3 disks by mail. I just got my new hard drive (the former was way past disappeared. I don't know how he held for so long) and replaced the HARD drive. I booted up and received a black screen asking me "Reboot and select proper boot device or insert boot selected ins media device to start and press a key" so I put in disc 1. I had a screen 'windows loading files', then a blue screen with a pattern on it, ray

  The Recovery Manager started, I said I wanted to factory reset and click Next, and then he asked if I wated to restore the system to factory settings and I hit Yes and then click Next. Then it tells me to insert the disc 1 (which is already underway) and they tray pops out, so I push the mouse and the back Gets the small CD icon next to him and I hear things from disc tray. The message goes away and then the tray opens again a second later and tells me to put in disk 1... >_

  I tried the disk 2 and 3, perhaps thinking that they have the project. I have NO idea why it does not work. I even went into the Setup menu and it is certainly set to boot from the hard drive...

  Tips, tricks, advice, advice? The computer was given to me at the time so there is no HP support more and I can not find anything by Google.

  Bumping.
  
  I put in the old HDD to test the DVD/CD player and it works very well for CDs and DVDs. Not sure that it would have a flaw JUST in the ability to run the boot disks as there has never been anything to take for her (although, nothing is impossible).
  
  Anyone know why I get several requests to put in disk 1? Especially when I put in disc 1 for recovery anyway menu (so obviously that it works)?

• HP Compaq Presario CQ57-229WM won\ ' t exceed from windows screen

  Hello

  I have my laptop HP Compaq CQ57 229WM brought by my last grandfather last year. The warranty was out. It is my first choice to fix my laptop. When I turn on my laptop it will just keep telling that in the blue square to the center of the screen...

  A problem has been detected and windows has shut down to prevent damage to your computer.

  A process or thread crucial to system operation has unexpectedly left or terminated.

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.

  If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable memory the BIOS options such as cache or shadowning. If you need to use safe mode to remove or disable components, restart your computer. Press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  STOP: 0x000000F4 (0 x 0000000000000003, 0xFFFFFA8003885830, 0xFFFFFA3003885E10.0xFFFFF80002083350)

  Data collection for the crashdump...

  Initialization of the disk for the crashdump...

  ...........................................................

  Please help me? I need my computer immediately. Thank you

  Hello.

  At has first of all thanks a lot for your help.

  I solved my problem in this way.

  I removed my hard drive to laptop, took all the documents I did not wont to lose and formatted it from another pc.

  I downloaded the first file its ( http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/ )

  and created an installer of the USB bootable Windows 7 on my drive with this tool ( http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html?tag=mncol;1 ) usd

  I have insterted my hard drive and my lap top when I started upward, I boot it form my USB stick and istalled win 7.

  Now it works very well. Just reinstall my programs.

  Thanks for your help once again.

• Connection Ethernet failed on my Compaq Presario CQ5320F, must be replaced, Windows 7 Home edition?

  My eithernet connect to will does not, we believe, were struck by lightning.  I need to replace the ethernet card, I think.

  Can what cards I get?

  Hello:

  Your PC has a controller integrated network, then Yes, you will need to get an add on card.

  You can choose a PCI or PCIe x 1 network network card inside.

  The external options for a USB to RJ-45 network adapter.

  You can start searching the kind desired by looking at this page.

  You have an index of possibilities.

  http://www.Newegg.com/store/subcategory.aspx?subcategory=27&name=network-interface-cards

  Paul

• RAM: quantity and speed for Compaq Presario CQ60-119tu - I can't understand it!

  Hi, I'll have trouble determining how much & how fast the RAM is that I can install in a "new to me" old computer that I just inherited.

  The manual is not very clear, it seems to say 3 GB or 4 GB, but I don't know that (Page 1-3 of the user's guide has a picture that seems to contradict itself...)    All RAM online vendors say 4 GB ', but maybe they are just trying to make more profit, I can actually use only 3 GB?

  The specifications also seem to say what speed of DDR2 ram, can I use... but a computer store guy that I talked to said it's important to know.

  can anyone help?  Thank you very much!

  Hello:

  The info on the card product page and repair are fragmentary.

  Max memory that works in your notebook is DDR2 2 x 2 GB = 4 GB.

  As your laptop processor is a celeron and a 667 MHz front bus speed, which would lead me to believe that you will install memory PC2-5300 (667 MHz).

  You can also install memory PC2-6400 (800 MHz), but it will downclock to 667 MHz.

  The best thing to do is to confirm what I said by running memory Crucial free analysis tool, which will report how much and how fast memory you can install.

  http://www.crucial.com/systemscanner/

  However, I'm pretty confident that what I said is correct.

• Test "Failed" detected on my Compaq Presario CQ5320F during regular maintenance.

  I need to know what steps should I take.  This is the first time I had a test failed.  Who says failure is SMART self-test.  I have Windows 7 operating system.  Thanks for any help.

  Hello patlee7,

  A SMART test failure points to your hard drive. The SMART test is designed to run tests on the hard drive and search for and identify anything that may indicate failure of hard drive. If the test fails maybe it's you letting know your hard drive may die soon.

  Remember to back up your data and prepare for this eventuality. If you do not wait for the right drive die you can consider replacing the hard drive in the machine.

  This article explains the failure of hard drive errors and measures
  http://goo.GL/zv11j

• Compaq Presario 1200Z necessary network drivers

  They used to work, now windows sees is no longer in the Device Manager.

  Help, please

  This seems to lead to hardware failure network cards.

  The same behavior is present in Mode safe mode with networking?

  Turn it on, then press F8 once per second to get the advanced boot menu.

  Select Mode safe mode with networking.

  This will help to check if it's a hardware problem or a software like problem drivers and registry are not quite the same thing in safe mode.

  Let me know what happens.

• Compaq presario cq5320f video card update

  Can someone tell me what are the choices that I have to update my video card on this machine without changing the power supply? Enter the game on PC more. Thank you!

  There is really no quality maps of game on the market for your computer's power supply. 250 watt power supply is too low for this kind of maps and will need to be replaced if you want use more add-in PCIe x 16 graphics cards.

  Frank

• Compaq Presario CQ5320F: update BIOS M2N68-(Narra6)

  For a BIOS update for my motherboard, but couldn't find anything on HP looking site. The current version of BIOS is 5.17 dated 2010-01-07. Any help is very appreciated.

  AmjadSeif wrote:
  

  Thanks for the quick reply, but when I try to run the update it gives me the error message "Incorrect BIOS for your system (253).

  That's what I thought, this is the case.  I had checked the page for up-to-date product specifications and none were available.  The updates are model specific.