Error Cpu fan failure cannot Acess Bios Compaq Presario SR1315CL Help!

Similar Questions

• Noise of Dell Studio XPS 9100 CPU fan failure CPU fan

  My Dell Studio XPS 9100 did a loud intermittent noise for a few months and then last week I got a CPU fan fault message while booting. I blew all the dust from the fan and I always get the CPU fan failure message. I finally got the system starts by placing a small fan blowing air into the funnel will CPU/processor fan.

  Alas, my warranty expired 2 weeks ago. I'm kicking myself contacting technical support a few months ago, when the problem started.

  I need to replace the fan. What parts need me, and where can I get them?

  Thanks much for the reply.

  Thank you. After being tossed a little I transferred to the sales and ordered a new CPU fan for a cost total which includes shipping and taxes of $42.25. Too bad it wasn't 2 weeks ago, then she would have been free.

  The seller said that I would not need thermal paste. Is this correct?

  Best regards

  Them

• CPU fan failure: Dell inspects the expedient to the customer before computers the they?

  After waiting 11 days which includes I believe a week in the production of my Tower, 17/11/2015 I finally received my new Inspiron Desktop Edition Gamer (Intel). I turned on the computer and guess what I saw on the screen "CPU Fan Failure".  So now, I have to return the tower to a Dell for a tech to fix the problem with the fan.

  Here's my question. Fact or not Dell inspect their product before they will deliver to their customers? Well, Dell has not delivered the product if a "CPU Fan Failure" had existed before shipment.

  Unfortunately things can occur in vessels too...

  Before send back you, open the case and check if the cable is correctly connected to the motherboard. The cable may have jumped out of the motherboard.

  Just unplug it and plug it back to the motherboard. If it's totally off the Board, you can go to the Support page for this exact model and look for the link at the top of this page for the manual. Most service manuals show a diagram of components/connectors on motherboard and CPU fan connector must be checked.

  If everything's fine, which solves the problem, so you won't have to send again.

• Presario SR5100 - CPU fan failure / BIOS firmware update

  My SR5125CL Office does not start even after replacing the CPU fan. Error: The CPU fan has failed.

  Some sites, I searched recommended deactivation/check the fan under the hardware > monitor in the BIOS.
  Cannot find this menu in the BIOS. Attempted to upgrade the BIOS from:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3460...

  use a different PC and it just tries to install on this PC. No options to create an update CD. Looking for other sites, same lame upgrade that involves running the OS. Even if the PC boots long enough to upgrade the firmware, it is now Windows 7 and the patch is only for Vista.

  I'll win the volunteers here and explain others to profit from my mistake. I took out the old fan to match. When I installed the fan nine days later I have it plugged into the outlet of case fan. For a CPU fan, it is not the BIOS. In any case, similar problems on the forum gave me the idea to look for another job from outlet and it is.

  Thank you

  Ken

• CPU fan failure

  I have a Compaq SR5510F and when turn it on, the error message: don't have a CPU fan.  I took off on the side of the processor, and two fans that I see are turning very well and one that is in the box also turns fine.  Is the CPU fan, one upstairs that you can not without disassemble everything?  What should I do?  Anyone else have this problem with this model?

  There are 3 fans in the SR5510F. The PSU (Power Supply) contains an extraction fan. The system fan is also an exhaust fan. The CPU fan is mounted on top of a metal radiator. The message "CPU fan has failed" is triggered by a sensor. The cause can be a dusty fan, or obstruct the fins of the heatsink or a fan that runs too slowly to dust.

  See this document

  

• Error operating system not found Message notebook Compaq Presario F700 {756CA}

  Hello, thank you for this forum!

  Record: Series of laptop HP Compaq Presario 700 {756CA} 32 Bit OS wireless

  ID # #ABC Serial # under the direction of the security KP027UA

  1 I used a service tech, as a gift, the Dec23/10 online. Problems occurred during the 5 hour session. PC was going well in advance.

  2 on PC Dec25 would not start. Operating system not found message that appears. Used F8, last known 5 times and it no longer works. Put into service on battery 4 times. It no longer works.

  3 a written tests HP for operating system not found {but was for XP and WIn2000}, with drive to test the hard drive. Message adjustment but

  other areas didn't have so not.

  4 related to Vista and Win 7. It's for the boot drive address not found Error Message.

  This message comes not so much waited and did as below.

  5 performed a full scan on MBAM, program no. threats 6 Ran Reimage and 2800 + corrupt or missing files found and repaired. This did not help and used the battery when you restart.

  7 when the open PC Windows updates were parties and 71 had to be installed. Had to use battery or reboot.

  8 new updates have shown, once again. Installed 8 and 1 failed. {Windows PowerShell 2.0 and 2.0 WNRM, optional}.  Could not start on more then ran battery test the boot drive HP fix error.  Test the Test of the Bios and the hard disk does not appear to work correctly according to the instructions, but normally open when you restart PC. I'm afraid to stop PC again.

  Questions: 1. can you please help with the BIOS and hard drive tests for my PC?

  2 HP support assistant has always shows failure of updates, analysis and data collection. Why?

  The downloaded program beginning Jan/11

  3 the event viewer displays error messages for updates and contact HP. examples: 134 CPU device breaks down... server windows could not start the process of some updates. What can we do? It comes after new updates.

  4 I want to uninstall the online tech company and all of its files, etc. Should I use REVO uninstaller. ? Windows Defender shows ports and exceptions for several parts of this program. I have to uncheck them?

  5 my adapter is bent at 45% s. This could be part of the problem?  The light is on.

  Your help is very appreciated. I'm at a loss and a user of learning with hours and hours of reading.

  Best regards, athome34

  athome34 wrote:

  Hi, thank you for having responded to my recovery options questions.

  Now, I realize that I did back up discs.

  Questions: 1 Will the Recovery on my PC option return it a 'new' State of the Vista operating system? Yes

  2 I'll Ineed to write important information from the. August 2010 back up? Yes

  3 Aug 2010 will save the files back of disks, programs and my Anti etc on my PC virus program? Must restore all the files and the settings. You must reinstall the anti-virus first.

  3 are Recvovery HP discs this duplicates what was first installed PC? Yes

  Thanks a lot for your help.  Congratulations!

• Is connected to the Internet, but cannot use the Compaq Presario SR5123WM desktop PC

  Product name & #: Compaq Presario SR5123WM desktop PC (GC660AA-ABA)
  Operating system: Windows Vista Home Premium 32
  No only error message when Internet Explorer does not display the page or iTunes can't find any connection network (any application that requires an Internet connection).

  No changes were made to the system.

  I have the dial-up connection. The Bureau uses the Modem - PCI Soft Data Fax Modem with SmartCP (COM3).

  Once I start the computer, log in to my user and connect to the Internet, I click on Internet Explorer and type in Google to see if it would work. It is said that "Internet Explorer cannot display the webpage". For iTunes, he would say "iTunes has not to connect to the iTunes Store." Make sure your network connection is active and try again. »

  I tried all solutions online and by phone. I reset netsh int ip / winsock. I reset Internet Explorer options. Nothing works.

  What is strange, is that the Internet connection works well on my laptop (using Conexant D110 MDC V.92 Modem (COM3)).

  It would be GREAT if you could help me find a solution to this problem, because this has happened for months, and I'm tired of waiting. I put all my hopes on you.

  You may be able to do a system restore if the original HP partition is always on the computer.

  Here is a document detailing the steps:

  Perform a recovery of the system (Windows Vista) HP

• Recovery, password Bios COMPAQ PRESARIO CQ61

  Hello

  I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios.

  The message that appears is "ENTER password or POWER ON PASSWORD".

  What can I do? After failing 3 times I get the message "System disabled" and the code 73585421.

  See you soon

  Hello

  Come in:

  62483407

• Compaq Presario CQ57-445EQ: recovery of the BIOS Compaq Presario CQ57 445EQ

  So I got this Compaq Presario CQ57-445EQ with Windows 7 and 4 GB of ram. Last night I tried to upgrade the BIOS of the first version (2008) to the last (2015) and he got bricks. During the upgrade, it got stuck for 30 minutes and I had to reboot. Now it is black screen, caps lock shift will blink twice every 2 seconds. I tried to recover from USB with sp55356 and sp64612 but no luck.

  I should mention that Win + B, Fn + B, Fn + Esc combinations is not the tone of the laptop, but it shows a USB activity.

  What can I do? Bios versions are .fd files.

  Thanks in advance!

  Not that I know of.

  You may need to purchase recovery media usb to your laptop to HP or HP partner.

  http://h10025.www1.HP.com/ewfrf/wc/CLC?tmp_showAll=false&'destPage = document & cc = us & dlc = en & docname = bph07143 & lc = en & tmp_clcDestination = doclink

• Compaq Presario CQ57-339WM: password bios Compaq Presario CQ57-339WM disabled

  Hey, I lost the book wrote my bios password, and now I can't access the bios menu. Please help me .code: 71509549.

  Regards.Sebastian

  Try > 64461589

• HP Probook s 4710 can't overclock. (Cannot acess BIOS settings)

  Hello! I have a Probook s 4710 with WIndows 7 64 bit.

  I tried to overclock, but its seems I can't acess this page of "configuration"... I can just press the F10 key to access the boot menu, then BIOS Setup, where I can just turn on and off certain actions etc... No overclocking it...

  Is - this same overclockable?

  Computers business notebooks are not to be overclockable. It is outside the design parameters.

  There is no official utilities that will allow you to circumvent the firmware and overclock the CPU, but they will also allow you to destroy your CPU.  Overclocking the timings of memory and systemboard bus primary\secondary and tensions are also not feasible with the official BIOS ROM files.

• Password for the Bios Compaq Presario error

  Help!  I need to reset my admin for my bios password.  I have the error message:

  System disabled

  [51194371]

  Thank you

  Hello

  Enter: 44892977

  Kind regards

  DP - K

• Cannot Acess BIOS / Boot from a USB

  Hello

  I wanted to install the new Windows 8 version overview with a USB key, but can not start when the computer starts, I tried pressing esc,

  F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 even or remove but nothing happens, it just boot windows 7

  Can someone help me please?

  I run windows 7 32-bit

  HP Pavilion Notebook PC g6

  Thank you

  Hello

  Try the following.

  With the phone off, remove the USB key.  Press the Power button and immediately after, press on and hold the ESC key - if it launches the start menu?  If so, you should see the option to select the boot device (often f9 to display the start menu).

  Kind regards

  DP - K

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Compaq presario cq57: help need bios password

  Hello
  need bios password for compaq cq57 (disable the code 60067845)

  Thank you all

  Hello

  Come in:

  75945281