Compaq SR5214x warranty

Similar Questions

• With the help of Compaq SR5214X on wireless home network

  I have a Compaq SR5214X desktop PC I want to connect to my home wireless network.  What to I need to buy for this?

  Hello:

  Here is an article from Microsoft which should provide the information you need to set your PC to a wireless home network.  Basically, you will need to purchase a PCI internal or external USB wireless adapter for your desktop PC.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  Paul

• Driver for compaq SR5214X (windows XP), I need

  I need to format my hard drive and I don't have the drivers for windows Office XP Compaq Presario sr5214x

  Could someone help me with this? Please

  lokatisolo

  Maybe you can check my post as a guide for another system. Measures must be similar.

  1. install XP Pro with Service Pack 2 2.

  2. identify the chipset and display drivers: http://www.intel.com/support/chipsets/sb/CS-020683.htm...and follow the instructions.

  Identify all other drivers (Device Manager) required looking at the specs of your system and perform a search for the xp versions: http://support.hp.com/us-en/document/c01237572

  When I installed XP pro with SP2 my LAN drivers have been installed automatically... good luck!

• Can I order recovery disks for my compaq which warranty is exceeded?

  Guarantee of my laptop has expired at the end of 2010.
  I lost my recovery discs and now I'm extreme need of recovery disks.
  Please help me...

  Hello:

  You can order discs of recovery at any time as long as HP has for your laptop.

  Please see this link below for more information on the order of recovery disks.

  http://support.HP.com/us-en/document/c00810334

  If there is a link to order your laptop (USA) and it does not work, simply order by phone 888-999-4747 or 800-474-6836 recovery disks.

  Paul

• How do reformat you a hard drive?

  I have a Compaq SR5214X and I would like to reformat the drive and start with a clean load of my operating system.  How can I do this?

  Hello

  Good luck, trying to find, but if you can't, you should have no problem ordering from one of the first 2 links in my previous post - I think they cost about $10 to the United States.

  All the best,

  DP - K

• Can connect wireless Compaq Presario SR5214X desktop PC?

  Hello

  I have a Compaq Presario SR5214X desktop PC. Can I connect wirelessly to the network with it? Have you looked online and I refuse to pay support to meet a simple Y / question N can I connect wirelessly to my router?

  Concerning

  Hello

  Your PC does not come with a wireless adapter, but you can certainly install one in a free PCI slot: these are the white horizontal slots shown in the bottom left of your motherboard is an example of the type of card, you need to install on the link below.

  Wireless PCI card

  Kind regards

  DP - K

• My HP Compaq Presario is covered under the factory warranty

  I have a HP Compaq Presario, which is covered by the factory warranty. I was wondering if it covers the replacement of keyboard, because some keys are loose. I was also wondering if it cover the screen because the hinges are loose and the 'top' is noisy. It's less than a year.

  Hello

  Please check that it is still under warranty by using the following link:

  http://h10025.www1.HP.com/ewfrf/wc/weInput?CC=au & LC = in

  Then, you can contact HP to get the keyboard replaced using "Contact HP" at the top of this page.

  Kind regards.

• Compaq Presario SR5214x: Replacing the CMOS battery for Compaq Presario SR5214x desktop computer

  How to replace the CMOS battery on a Compaq Presario SR5214x desktop computer. What type of battery? Where is the battery? Thank you (deleted content)

  @ernier

  You will find how to do here.

  http://h10032.www1.HP.com/CTG/manual/c00840496

  REO

• Compaq Presario CQ62: HP WARRANTY CHECKER STOP WORKING error

  I received an other BOUNCING error message almost every 5 minutes and is annoying me 'HP WARRATY CHECKER stop working. Looking for Windows for a fix"or something. What is the cause. In addition, the error next message of the HP "HPCEMENT stop working. to find a solution to Windows.

  I wonder if this is also related to a corrupted AUDIOSES > whch DLL I also work to find a solution. It seems that my audio drivers, dll had been compromised.at leat that's what I get as error message and no malicious softwatre tool, CHKDSK and sfc /scan can fix it. What can I do on the HP WARRANTY CHECKER STOP WORKING error message?

  Thank you.

  Bailen2vc

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant by opening windows control panel, open programs and features, make the entry for HP Support Assistant right click and select uninstall.  Once this process is complete, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the laptop.

  Also find the link given below might help you.

  http://support.HP.com/us-en/product/HP-G62-notebook-PC-series/4156509/model/4226731/document/c02604915

• Compaq Presario F500 notebook computer Series Warranty Service improvement experience :-(

  Earlier Notepad Persario F500 I had stopped working.  There is no video on the computer LCD Panel or external monitor. The laptop turned on, the power LED lights up, but nothing has been seen on the screen. It was out of warranty by one year and I thought it was pretty much dead.  Someone else opened it to see if they could do something with it, but they couldn't.  Early last month, I discovered just by chance that HP had extended the warranty on these books and that my symptoms correspond to what is presented on the following link.

  http://support.HP.com/us-en/document/c01480071

  I've never heard of this before, so I called HP support and the tech told me that the machine was still under warranty and the symptoms seem to fit the program.  A FedEx box was sent to him for a warranty repair.  An email was sent and a tracking number has been given to the area.  It arrived in two days.  I packed the laptop and sent him to HP.  A tracking number was given to me for this leg of the trip too.  He arrived at HP in two days.  The support that has been given has been updated to show the laptop had arrived and was being looked at by a tech.  So far, I was pleased with the way things were going.

  After about two days, the link was updeated and asked me to contact HP and charges of $429 has been issued. I called and customer service told me that service technicians found that the laptop was ben opens and some internal damage had occurred because of this.  Before the warranty work could be done other problems should be fixed.  I refused repair and told them to send it back.  On the rear view I should have started my argument with HP right there.

  The reason why the laptop has been opened in the first place was due to the fact that there was a problem and I knew it was out of warranty.  If I knew the warranty enhancement program before any damage could be because the laptop would never had been opened.

  The shipping to me was a bit mysterious.  No email or tracking number was never given to me for the return trip.  I called customer service three times and got three different stories on this.

  The first time I called customer service told me that the laptop was on his way back to gace me and they me two tracking to get numbers.  After that I tried these figures, it seems that it was for the box that was sent to me originally and the other was the number that was used to ship the laptop with me to HP.

  Yesterday I called again.  This time customer service could not find any current record of the laptop.  The representative thought that the laptop was probably still at HP where was the work of security without a damage that has been done when it was opened to the top of the mounting.  He told me to call back on Tuesday for an update.

  At this point, I was suspicious.  I decided to call again today.  This time the representative told the labor warranty and that he would be delivered back to me.  They said that an email would be sent to me with a tracking number for the return trip.

  Later in the day the phone was actually decreased from home by Fedex.  No warranty work were made.

  At this point, I'm very disappointed and confused.  It seems that representatives of clients, that I spoke none really knew what was going on with my laptop 100%.  The fact it was sent to me without an email or a tracking number is very disturbing.

  More I think about it more disappointed I am with HP in the handling of this case.  HP knows that laptop has problems and still not would repair mine since it was opened and damaged during this process.  The only reason why he opened was in first place because at the end of material he had and the fact that, as far as I knew, it was out of warranty.

  I hope really that someone in the 'food chain' at HP reads this and take history to heart.  Management at HP has to do a better job in such cases.

  Thanks for the clarification.  I understand that as well.  It's a shame that the video tape was damaged.  If I only knew the building ahead.  He could go in circles forever.  It's like what came first the chicken or the egg.  It's all water under the bridge now.  The laptop was separated out on ebay and I have two other laptops anyway.

• HP Compaq 6000 Pro SFF: Help change the chassis.

  Nice day.

  I have a HP Compaq 6000 Pro SFF PC, I want to upgrade in a mini tower, is it possible with this PC? The reason is because I want to install a new GFX card and a cooling system for best performance, however, @ 240 PSU will be not reduced, especially not when I already 2 SATA drives. Can someone tell me please on what to do? Thanks in advance.

  PS: My PC is already out of warranty 3 months ago. If I can do pretty much anything I want with it without breach of the warranty.

  Specifications of the PC:

  HP Compaq 6000 Pro SFF

  Intel Core 2 Duo E7500 2.93 Ghz

  1 x DDR3 2 G of Ram

  2 x SATA hard drives

  1 x DVD player

  Windows 7 SP1 (32-bit)

  1 x PCI-E slot? (I do not currently know what type of housing is)

  POWER SUPPLY 240

  The motherboard so that the PC is listed as a BTX.  The typical motherboard is ATX.  HERE IS a PAGE that gives information of the two styles differences.  What I see, the BTX is built around designs of air traffic, so be careful.

• Compaq Presario C700 stops frequently

  I have Compaq Presario C700. There: 1.73 GHz Pentium Dual-Core Mobile Processor T2370, up to 2 GB DDR2,

  Recently, I noticed that the laptop stops frequently when I'm listening to music, watching movies, or sometimes when you work. I did some research on the problem and I found that most people say find the manual on COMPAQ.com and watch the plug in order to open the laptop, then spray/clean fans / or heating of the parts. Is it the right thing to do.

  Several times a laptop overheating is directly related to the cooling of the processor. The main culprit is the fan. The fan draws in air from the bottom and it blows on the side. It will also suck in the hair, dust and other debris. Often this kind of thing is trapped by the heat sink and the wire time accumulates in a layer that stifles the cool air, go to the processor, making the fan to redouble their efforts.
  
  Read this:
  
  http://support.HP.com/us-en/document/c01657439
  
  What I recommend is to take a canned air and blow out vents in the side and the underside of the laptop. If after that you still have overheating problems and your laptop is under warranty, you can take your laptop to an authorized Service Center HP and ask them to clean the fan and the heat sink. You can check your warranty here:
  
  http://www13.itrc.HP.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475
  
  If it is out of warranty, consider looking for the service manual for your specific model, in the manual it is patterns to disassemble the laptop. It is much easier that remove a motherboard, so don't feel intimidated by the idea of clean the fan. Also you can remove the heat sink and then remove the thermal grease and apply a new layer, which also helps reduce heat related issues.

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• Compaq Presario SR5110NX: sr5110nx

  Hello community!

  I am the proud owner of a Compaq Presario desktop computer. I bought it in 2007 - and is no longer under warranty. HP informs me that they no longer support my model. I currently have 10 Windows running in the system - having started with Vista, then Windows 7. Here's my question:

  When I use tune to determine the drivers that I might need to update, the wizard identifies my system as something totally different, indeed a photo printer - with a strange product name and serial number.

  How can I get the wizard to recognize my real name and serial number?

  Help, please!

  JimmyK1

  HP Support Assistant won't help you since HP lists no Windows 10 driver for this model. I just want to remove HP Support Assistant and rely on Windows Update for all the new drivers and I seriously doubt all will be published here on out.

• Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

  Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.
  
  
  
  
  
  Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
  
  
  
  
  
  Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
  
  
  
  
  
  1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  3 safe mode with network - see "Safe Mode" above.
  
  
  
  
  
  4 safe mode with command prompt - see 'Safe Mode' above.
  
  
  
  
  
  5 last known good Configuration (Advanced) - see "repair your computer" above.
  
  
  
  
  
  6 start Windows normally - see "Repair your computer" above.
  
  
  
  
  
  7 debug mode - see "Repair your computer" above.
  
  
  
  
  
  I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
  
  
  
  
  
  PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
  
  
  
  
  
  I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
  
  
  
  
  
  http://Paste.Ubuntu.com/16018001/
  
  http://Paste.Ubuntu.com/16019372/
  
  http://Paste.Ubuntu.com/16040380/
  
  
  
  
  
  The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
  
  
  
  
  
  Here are my details of PC, if it is useful:
  
  
  
  
  
  Desktop Compaq Presario SR5130NX
  
  Serial number: [personal information]
  
  Product number: GC667AA
  
  Warranty end date: October 5, 2013 (according to Compaq/HP.com)
  
  
  
  http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
  
  
  
  
  
  Thanks for any help you can provide.

  Hello

  Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

  NTFS

  [1]

  [11]

  NTFS-3 g / important

  GParted will try.

  Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

  So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

  https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

  • Windows Boot Manager (Bootmgr.exe)

  • Windows operating system loader (Winload.exe)

  • Recovery of Windows loader (Winresume.exe)