Get the sytem date and the time of the BB device

Similar Questions

• Mac Mini 2010 Date and reset time

  SP, recently, apparently without any reason at all, date and time of my Mac Mini will reset to January 1, 2000 at 00:00:00 every time that I turn on/off. I tried various methods, such as getting it automatically sets the time and date, manually set the time and date and time zones and other things. Nothing has worked.

  As in the title, it's a Mac Mini 2010. I had this problem before with a full boot disk and other things, drive hard replacement necessary. He was replaced earlier this year, and I had no problem with him since then, so far. It is the break Safari (certificates are not recognized), internet and other applications such as soft. Any suggestions?

  A flat battery logic-board can cause this behavior. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

• print module cannot get the printer device context

  I can't get my printer to work. It seems that the computer does not recognize the printer when I plug. No printer symbol. then, when I try to print a square stands up and says 'printing module cannot get printer device context' I have no idea what this means or what to do about this please help

  You need to get the print vendor drivers.   You can try using a printer driver that converts data of the PDL even that interprets your device, but you should request this information from the company that made the device

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• ODI:i need to get a RDBMS data and put it in a file with EBCDIC enc

  I need to get data from an RDBMS and put it in a file with EBCDIC encoding using ODI
  I know how to get data and put it in the file using ODI, but do not know how to EBCDIC coding the file using ODI

  Hello

  Its very simple.

  You must specify the encoding code in the JDBC URL of the server in the topology Manager data file.

  For example,.

  JDBC:SNPs:DBFile? ENCODING =

  You can get your codes coding supported by ODI from here,

  http://download.Oracle.com/docs/CD/E17476_01/JavaSE/1.4.2/docs/guide/Intl/encoding.doc.html

  Thank you
  Guru

• Portege R400 - how to get the fingerprint device to HDD unlock

  Portege R400 model PPR40E-00901LEN

  I've had this laptop since 2007 new (approximately). I put the BIOS and disk passwords HARD and the biometric to unlock the BIOS, HARD and Vista drive. It worked well until recently. Result of an incident when someone tried to crack into the machine, it unlocks is no longer the HARD drive

  The attacker confessed to the use of BACKSPACE to work around the footprint digital, correctly guessed the password of BIOS and going on to make several attempts to enter the HDD password.

  Now when I try to access the computer by using the fingerprint reader, it unlocks the BIOS ok, so he remembers clearly to me. However, it is not open HARD drive. Apparenlty the fact that 3 + failures to enter the master password disk HARD text forces text of this password and no biometric entry. At least, there seems to be something like that.

  My questions are

  (1) in these circumstances, the BIOS anterio-rite the biometric to forget the HARD drive password?

  (2) or is still piometric my disk HARD but the BIOS password feature is not asking him?

  (3) if 3 or something similar, so this password is always in the biometirc device, how to tell the device to provide this password?

  Please note that I can't in the BIOS right now, because do not unlock the HARD drive prevents the POSITION to perform.

  Of course, I know what I really need to do is type the HARD drive password. Unfortunately in about four years, I forgot it. I hope that I can get into the BIOS if I remove the HARD drive physically, but wonder if there is something else I should do first in order to avoid making things worse.

  Thanks to hope
  River ~ ~

  Post edited by: river14april

  Post edited by: river14april: typos and clarity

  null

  Hello

  All I know is that the fingerprint for Win 7 software is created by UPEK company.
  http://www.UPEK.com/support/customersupport/psql.asp

• Hi__I have acer extansa laptop 5635. I installed Windows 7 in there. I am facing problem on bluetooth device drivers. How do I get the bluetooth device driver.

  every time I help out to fix this problem, it search for it and then he said: this bluetooth device driver is not installed. Install the last jerking for the device.

  After that, I click option

  apply this hotfix

  then he begins to search for, but after a few seconds it gives an error that

  device not found driver.

  Please help me solve this problem. I will be thankful to you.

  Hi Fadi,

  If Windows is unable to install the drivers automatically, then you will need to visit the Bluetooth device manufacturer site download and install the drivers manually.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Looking for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 1-liner to get VM memory date and compile/install

  I think I need my coffee. (that I jumped today)

  I thought I could get the build or install the date with the command Get - VM, but now I can not find it.

  Get - VM, VM > | Select comments, MemoryMB

  Any help would be great... maybe that's impossible for a 1-liner?

  I think you should take a look at this post: VM created is.

• How to get the USB device in the list in the resource name field VISA VISA Open VI

  I followed the tutorial below to connect with my camera using the USB port. But I don't have the name of the USB port able & Automation Explorer list devices. How to get it? Can anyone suggest something?

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  Hi kimhyun,

  I tried this. But managed. I used the USB as my sugesstion to device.my USB is that you unplug your device at any point of your work. Check that the device is properly connected. IF your system has recognized your device, you can view the device in Control Panel > Device Manager > then open your particular device from the list of the connected device then details > description of the system > hardware ID > then you can find here the code from your provider.

  Try this. I think that your device is connected to loosen. What USB device you are using? Also, you must install THE DRIVER FOR YOUR USB DEVICE.

  Good luck

• In my "Plugin Check & Update" Shockwave Director is not up-to-date, and every time I go on the site. Nothing happens, it just says: "Installation Complete.

  -Hello! This issue has been a problem for months and has been bothering me for a long time and I don't even no what the problem with my browser, or my computer if this is the case. I tried several times by clicking on the "Plugin update" I go to the website of Shockwave and he told me that the installation is complete, but the confusing part is that I have the ability to download anything. He just said "complete Installation."

  Help, please!

  And, if possible, please tell me how to uninstall the Shockwave Director, because I do not think that I still need.

  I'll try and offer the pictures of what I see, I hope it helps.

  That's what he tells me.
  [IMG] http://i1251.Photobucket.com/albums/hh553/KervinsPictures/FireFoxProblem.PNG Line

  [IMG] http://i1251.Photobucket.com/albums/hh553/KervinsPictures/FireFoxProblem2.PNG Line

  Hello

  You should not install Shockwave Player unless you know for a fact that you need.

  1. In the next page, save the uninstaller program, the full installer for Netscape and the full installer for Internet Explorer if you wish also in this browser.
     • http://www.Adobe.com/shockwave/download/alternates/#SP
  2. Close all applications.
  3. Launch the uninstaller.
  4. Restart your computer.
  5. Run the installer for Netscape.
  6. Run the Setup program for Internet Explorer, if you downloaded it.

  This forum supports BBCode as the [IMG] tags. You can simply post the Plains links to images. In the replies to the thread, you have the ability to attach pictures to your message.

  • https://support.Mozilla.org/KB/markup-chart

• Is it possible to get GPS raw data and the sensor data in a single program.

  GPS and sensor.h are the bps_event_get_domain (event).

  {If (bps_event_get_domain (event) == sensor_get_domain() & bps_event_get_domain (event) == geolocation_get_domain() {)}

  The collection of data from the sensors and GPS data in the same program without conflict?

  Thank you for your attention.

  You must structure your code like:

  If (bps_event_get_domain (event) is {sensor_get_domain()})

  / * handle sensor event * /.

  } ElseIf (bps_event_get_domain (event) == geolocation_get_domain() {)}

  / * handle geolocation event * /.

  }

• How to get only latest date and other columns in the table

  Hello
  

  Table
   
     id          name        date
    123        a             2/3/2010
    124        b            15/2/2010
    125        c             1/1/2010
    123        a             12/4/2010
    125        c             17/2/2010
  
   

  It's a table, id, name, date here is the composite key.
  I want to select id, name, and date so that date (e.g., 123 date 04/12/2010 be selected for the id) is selected for each id and each id and name should be selected once.
  So, what will be its application?
  Thank you

  select
     id,
     name,
     date
  from
  (
     select
        id,
        name,
        date,
        max(date) over (partition by id, name) as max_date
     from your_table
  )
  where date = max_date;
  

  Would do assuming you do not have duplicates (all 3 columns) in the table.

• I get the message "device USB has malfunctioned and windows does not recognize it" when I connect my Ipod touch to load or put music on it.

  Original title: legacy A USB has malfunctioned and windows cannot recognize him does that mean?

  I get this message when I connect my ipod touch to load or put music on it. It worked before on both of my computers and I have not changed anything on one of them. I even bought a new usb cords just in case that was the problem, but still no luck. the funny this is that the battery in the corner of the ipod looks like he got some fees, but I'm not sure because of the message. I soft reset it and hard reset it I tried to install the new updates, but it is said that it is up-to-date. It is therefore unknown on my computer device how do I? someone please help.

  Hello
   
  The problem is specific to the Ipod?
   
  I wish that you follow all the steps in the article apple to fix the problem.
  http://support.Apple.com/kb/TS1538?viewlocale=en_US
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• analyze serial port hex data and graph time real conspiracy

  Hello guys,.

  am a newbie to labview and am currently working on my final project of the student, but I met a problem extracting the values of currents and voltage of hexadecimal string read to read the VISA stamp. I also want to throw the string header every time so that I can only process only the voltage and current hexadecimal string. My rope of the read data is attached. 0023-0034 0045 0132 AA55 AA55 AA55... Where AA55 is header I want to throw. The following 2 after the header bytes represent the tension, while the 2 bytes represent the current. After 6-byte header (AA55) appears again.

  So far, I read the data read as attached VI visa, and I would be recognizing all assistance to extract successfully, only the voltage and current values every time the (AA55) header is read to raw data. I have read several forums observation about the covers this topic but none seem still a click. Thank you once more!

  The VI am working on is attached and some failures in the print screens.

  A framing error means that something is wrong with your string of bits 1 and 0 s, coming from your equipment.  The start and stop bits are not where they are supposed to be.  Check all your configuration settings set to ensure that they match the device.  Baud rate (230 400 seems quite high), stop bits, data bits, parity.  Something is probably wrong in there.  That or if you have bad cables or electrical noise interfere with transmission.

  Why is it you are emptying the receive buffer?  Which is almost never necessary and could actually cause you to lose data or start the synchronization of your data once you've established.

  I don't know what you're trying to do in this while loop inside.  That looks nothing like what I was describing.

  See the attached VI.  I have not fully tested (after all, I do not have material sending me data).  But it should give you the idea.

• my laptop can not get the boot device

  When I turn on my old laptop, it goes to bios and saying: no boot device available strike f1 to not to retry boot, f2 configuration utility, no other options. all get any idea for this problem thx allllllllllllllllll

  Hi isaaq,.

  It may be a loose cable connection or the drive may have failed.

  Since it is a laptop, the support option are limited.

  Depending on the age of the PC, you can contact the manufacturer to see if there is a diagnostic program.

  According to the OEM, your recovery disc can have a method of repair installation if it is not hardware fault.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Possibility to send e-mail to later a date and a time

  I am wanting to create emails today and sent as reminders before each football game and practice throughout the summer.  How can I set up the email to send automatically to future dates...?

  I know two ways to do:
  (a) with Outlook when you are connected to an Exchange Server
  (b) with the scripts, using a command line mailer.