Compatibility Matrix vs Release Notes - who 'wins '?

Similar Questions

• SQL server 2005 sp3 - says no on VC 2.5U4 compatibility matrix - VMware will all simply not to test and publish?

  SQL server 2005 sp3 - says no on VC 2.5U4 compatibility matrix - VMware will all simply not to test and publish?

  I play a new installation of VC 2.5U4 and provides the DBA SQL 2005 SP3 standard. VMware will not test compatibility SQL 2005 SP3 or are there unresolved issues? Messages to date appear to be mixed with most saying SP3 of SQL is not question.

  Updates or VMware response to requests for information from SQL Server 2005 SP3? Given that the SPs are listed separately on the compatibility matrix... it seems not to be supported. VMware would accept a call from support with VC on SQL2005 SP3?

  I'm in a similar position, we have installed SQL 2005 with SP3 and it seems to work very well. I just want to know, vmware will support me if I have problems with VCenter?

• Downloaded and installed FF 36.0.3 but there are no release notes so is this a legitimate installation?

  So I made the last update to FF (36.0.3) warned. Then I went to take a look at the release notes in

     https://www.mozilla.org/en-US/firefox/releases/
  

  for 36.0.3 but there is none. It was therefore a release legitimate without documentation or I just get snookered by installing unauthorized software?

  Hi Jeff Barry, yes it's a legitimate update - annual pwn2own Conference has just ended and firefox 36.0.3 who's going to fix the fallout from that.
  I guess that the priorities were providing security patches to users as quickly as possible instead to have notes publication entirely in place first (they will follow soon no doubt).

  http://arstechnica.com/security/2015/03/all-four-major-browsers-take-a-stomping-at-Pwn2Own-hacking-competition/

• Matrix Revolution Cam not recognized on my Satellite M40

  My cam of matrix revolutions could not be recognized when inserted in the my Satellite M40 149 pcmcia slot. The first time was a stranger to me card PCMCIA MTD-0002 and when I updated the driver, it is totally ignored.

  I updated the Bios to v 1.20 and I wonder if I can do more for the location PCMCIA driver, is a Texas Instruments PCIxx21 Cardbus controller / x 515.
  Thanks in advance for your suggestions!

  Dimitris

  Hallo Dimitris

  If you want to use some special hardware like Matrix revolution Cam pick up in a first time information on compatibility and any problems that may occur. It is always recommended to visit the manufacturers support page.

  In any case I found some info that this card is distinguished not by cell phone. Only if 59 pin is detached in the specifications it should work.

  Good bye

• BlackBerry Q10 where are release notes version 10.1.0.2030

  Where the Blackberry to display the release notes for software updates of the operating system. It would be nice to know what has changed in the next version of the OS software instead of running into things by accident.

  Indeed, there is a whole industry of cottage from different blogs that are dedicated to the publication of this information. They have dedicated people who understand and publish what they discover. We all that carriers did a better job for the communication of information... but unfortunately it's out of our control.

  Good luck!

• Release notes for IPS Signatures available via a direct URL?

  Is there some URL, I can refer to work colleagues, so they can review the current and any of the other IPS signature release note (s)? The only way I found to get there is through the slow multistep download section, and a few colleagues, I do not know who find acceptable. You know how some desktop environments can be, right?

  Thank you.

  The answer depends on what exactly you are willing to provide.

  If you are looking for just the main part of this file that lists the signatures of new and modified, then you can download the latest being and he has all the information for the latest sig updates several:

  Here is the link to the file Readme S407

  http://www.Cisco.com/Web/software/282549755/27019/IPS-SIG-S407.Readme.txt

  You can look down and find the GIS information all the way back to S339.

  If you are looking for a quick way to your colleagues see the list of updated signatures to the forthcoming GIS Day, then check out the Archive of Bulletins of Cisco IPS Active update on cisco.com:

  http://Tools.Cisco.com/Security/Center/bulletin.x?i=57

  Each ballot will list the signature changed or new in the update of the signature.

  They are marked instead of updating GIS marked this day.

  If you want files real readme for updates of signature, then you could also try to go to this page:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ipsmc-ips5-sigup

  It's the page where signatures update files can be downloaded manually for virtual machine management tools or CSM.

  The readme in signature files posted here are also the same for the sensor.

  The advantage of this page, is that all files can be at least but a single page.

  NOTE: Older Readme files can be found in the archive for the above page location:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ipsmc-IPS-sigup-arch

  Hope one of these options will work for you.

• VSphere VM - FEX compatibility matrix

  Hello

  I intend to upgrade an instance vCentre to 5.5, before that I need to know what versions of VM - FEX / VIBs will work with him. I have searched for a while and can not find a compatibility matrix, does anyone know where I could find it?

  Thank you.

  have you checked http://www.cisco.com/en/US/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2.21.pdf

  

• I'm looking for the InDesign CS4 for Mac 6.0.6 Release Notes

  These are not listed on the release notes for the update:

  http://www.Adobe.com/go/id6_readme_en

  Who actually redirected to this URL:

  http://www.Adobe.com/support/documentation/en/indesign_incopy/releasenotes.html

  And he stops to 6.0.5

  Someone at - it find them somewhere?

  The notes don't are not yet updated in the general page of the Release Notes yet, they should be there at the end of the week.  However, you can find them at the following locations:

  Adobe InDesign CS5 7.0.3 Release Notes > http://kb2.adobe.com/cps/870/cpsid_87077.html

  Adobe InDesign CS5 6.0.6 Release Notes > http://kb2.adobe.com/cps/871/cpsid_87110.html

  Adobe InCopy CS5 7.0.3 Release Notes > http://kb2.adobe.com/cps/871/cpsid_87108.html

  Adobe InCopy CS5 6.0.6 Release Notes > http://kb2.adobe.com/cps/871/cpsid_87111.html

• Release notes for Mac OS Sierra

  I have searched all over the Apple site and cannot find the release notes for Sierra.  I'm trying to find the official word of what are known issues with Aperture, thanks!

  Dudeman

  You can read about some of the issues of first-hand in the following link:

  Opening 3.6 will work in Mac OS Sierra?

  That said, I doubt that Apple could go to the trouble of listing issues with a product that they have abandoned some years ago and no longer support.

• "Display the release notes" fails in the Add-ons Manager

  Before you manually update the extensions of the option "Display the Release Notes" fails with an error message. I always like to know what the changes will be implemented before the update.

  It has been produced on each update of each extension for these last months under FF28. FF29 has not fixed it.

  P.S. I just found this bug report. See if it describes your problem (see Bugzilla Etiquette before comment by bug reports).

  • Bug 1003567 - update release notes addon 403 forbidden

  The problem was solved just today.

• Re: Tecra A10 - where are the BIOS updated release notes?

  Hello

  I have a problem with my Tecra A 10, it sometimes turns off.

  I have updated BIOS 1.4 3.0 BIOS to see if it suits it.

  I can not find the release notes to see what has changed between revisions of the BIOS, can someone point me to them?

  Thank you
  Dominic

  Hi Dominic

  And now is the problem solved?

  On the page of European support, you will not find this info but WE manage the page there are a few information about it.
  Download page HERE you can find for us Tecra A10. Check the 3.0 update BIOS and look for info on the change history.

  To be honest, BIOS are the same.

• KB2160841 will not install win 7 .error code 66A

  "Original title:" kb2160841 will not install win 7

  I tried the installation manual ' can low but the installation gives me a message that says doe. s does not apply to this os or blocked I get error cde 66A, I'm under win 7 cannot install auto or manual

  Help! tomt2006

  See the section "How to get help" of http://support.microsoft.com/kb/2160841

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I get rid of the xp.hta an application not valid win 32

  When I try to install a printer hp printer all in one, I get an error saying that xp.hta an application not valid win 32.

  What can I do to get rid of him?

  Hello

  "The invalid Win32 Application" indicates that the file is corrupted.

  In this case, you can try to re-download the file from the web site of adequate support for your printer, and then try to install using the new file.
  1. How you try to install the printer?
  2. What is the exact model of the printer?
  Respond with more information so that we can better help you.
  Alternatively, you can contact HP for instructions on installing the printer software.
  
  http://WWW8.HP.com/us/en/support-drivers.html

• While the installation of Service Pack 3 error message comes as "Bullxp is not a WIN 32 application.

  Original title: installation of Service Pack 3

  IAM using windows xp service pack 2 for Bull XP software. Now, I want service pack 3 to my Zune connection. I downloaded SP3 but that you can not install. Error message comes as Bullxp is not a WIN 32 application. So my question is. What is win32 application. ?  Will I get updated by the Download Center or else are up to so that I can go?

  Hello

  The error message "not a Win32 application invalid" is displayed on the Windows computers and can indicate a variety of problems. Win32 is part of the core of the Windows operating systems and programs installed on your computer must communicate with the kernel in order to work properly.

  Follow the steps in troubleshooting these KB articles and check if that helps:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also post your query to the Bullguard Forum and check:

  http://Forum.BullGuard.com/Forum/

• HP Pavilion XE763 BIOS update Release Notes?

  Work on the following machine:

  HP Pavilion XE763 with Phoenix BIOS revision of Basic 4.06 2.02 07/14/00

  ... and considering the BIOS firmware with this update:

  Dunidar wrote:

  I understand that you are looking for documentation of the HP Pavilion Cognac BIOS update. Unfortunately, the only information I can find on this update is located on the page I linked to you.

  I found the release notes.  Where everyone is looking to get this info, it's here:

  Technical release notes:
  ------------------------

  2.09 14/04/01
  (1) adds the control On / Off of FAN3 for rev b/j. H
  (2) support Simple Boot Flag

  2.10 20/04/01
  (1) changing the report option of CPU frequency for unlocked CPU (update of the standard rev 2.0)
  (2) edit the table above 1 GHz CPU speed

  2.11 07/19/01
  (1) display ID of FDI in manufacturing
  (2) fix error modem Cheetah under WinXP

  ... so it's not like they have added support for the USB boot.