compatibility matrix

Similar Questions

• VSphere VM - FEX compatibility matrix

  Hello

  I intend to upgrade an instance vCentre to 5.5, before that I need to know what versions of VM - FEX / VIBs will work with him. I have searched for a while and can not find a compatibility matrix, does anyone know where I could find it?

  Thank you.

  have you checked http://www.cisco.com/en/US/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2.21.pdf

  

• Compatibility Matrix vs Release Notes - who 'wins '?

  We run vCenter 5.1 U1 with ESXi 5.1 U1 hosts and at one point, I thought would be so deploy vShere replication 5.1.1 for match/being compatible.

  The compatibility matrix has green checkmarks when selecting vSphere replication 5.1.2 with the foregoing.  I know I can't use vSphere replication 5.5.x and that's fine.

  However, the Release Notes for vSphere replication 5.1.2 States the following: "before that vSphere replication upgrade to version 5.1.2 make sure that you have upgraded to vCenter Server 5.1u2.

  So who 'wins '?  Can I go ahead and use my other purely 5.1U1 vCenter and ESXi environment vSphere replication 5.1.2?  The '' correction '' in 5.1.2 to 5.1.1 is minor, so I doubt I give much to just settle for 5.1.1 for my tests/POC, but I wanted to be sure and prefer to use the more recent/more great if I can.  Thank you.

  had it checked. the release notes are NOT correct and will be changed. Go by the matrix of compat. hope that helps.

• SQL server 2005 sp3 - says no on VC 2.5U4 compatibility matrix - VMware will all simply not to test and publish?

  SQL server 2005 sp3 - says no on VC 2.5U4 compatibility matrix - VMware will all simply not to test and publish?

  I play a new installation of VC 2.5U4 and provides the DBA SQL 2005 SP3 standard. VMware will not test compatibility SQL 2005 SP3 or are there unresolved issues? Messages to date appear to be mixed with most saying SP3 of SQL is not question.

  Updates or VMware response to requests for information from SQL Server 2005 SP3? Given that the SPs are listed separately on the compatibility matrix... it seems not to be supported. VMware would accept a call from support with VC on SQL2005 SP3?

  I'm in a similar position, we have installed SQL 2005 with SP3 and it seems to work very well. I just want to know, vmware will support me if I have problems with VCenter?

• Compatibility matrix for Cisco Catalyst 3012 Switch Module

  Hello

  I'm checking the compatibility of the VMware vSphere 5.5U1 Guide and an IBM switch module Part Number: 43W4401 product name: Cisco Catalyst Switch Module 3012. The search of the matrix returns Cisco 1GigE I350 LOM who seems to identify the drivers of Cisco.

  Can anyone help clarify and check if this IBM re-branded chassis switch module is supported and to a specific firmware for the switch code? Thank you all.

  L2/L3 switches are off-limit of drivers for vSphere hypervisor, so you don't find on the HCL...

  Here's IBM BladeCenter matrix interop for VMware:

  IBM ServerProven compatibility

  and here is the interoperability of the switch Cisco Catalyst 3012 with IBM BladeCenter chassis:

  IBM BladeCenter Interoperability Test program

  I hope this helps...

• VCA compatibility matrix

  Hello

  We plan to extend our cluster HA/DRS vSphere, currently existing three HP ProLiant DL380 G6, with a server, but it would be DL380 G7. We have CVS in vCenter activated by the following:

  

  But if I followed 1003212 Knowledge Base article, say something different.

  We currently have CPU xE5520, which is Nehalem. We want to add xE5645, which is Westmere.

  Knowledge Base gives me red, which means that it is not taken care of. said vCenter: Westmere is OK.

  Is our configuration support in this case?

  Best regards

  Marco

  Hello

  We use the G6 and G7 with EVC Mode. It works without problems. And if the hardware is on the HCL, there should be no reason why it is not supported. For this purpose, you have the opportunity to use CVS. Because not all companys are in the enviable position to buy equipment for years to come.

  Frank

• Satellite M300 - compatibility with Windows 8

  Hi guys, does anyone know if my Satellite M300 PSMDCA-03J00R can run Windows 8? His current running Vista and I have not used for a few years, but now I need to use the laptop and I can't wait to abslutely Vista and would like to change to something better.

  I searched many forums and websites regarding that, but could not get a definitive answer. Does anyone have an upgrade to Windows 8?

  Thank you!

  Hello

  Please visit http://www.toshiba.eu/innovation/generic/windows8-message/ and there you can pick up all the info on Win8.
  Check the Toshiba compatibility matrix. You know whether your mobile phone is supported for Win8 or not.

• Docking station compatibility

  I used to have a 230 X, and I still have the docking station for it (I forget exactly who, but she helped two monitors, which IIRC is not the base model).

  I am now looking to be replaced by a 250 X or a T450. Two of them will be held on the old docking station?

  Thanks for any advice.

  Course

  Compatibility matrix options (for accessories):
  https://support.Lenovo.com/au/en/documents/um006391

• IdeaPad Y500 need replace HD matrix > FullHD

  Hello

  Please suggest me the exact name of the required components.

  Am the owner of Lenovo Y500

  The laptop is all simply excellent, powerful processor, Nvidia SLI 2 650 M 2 GB graphics card.

  but the matrix of the laptop is just terrible.

  Not only that the resolution 1366 x 768, so still and the angles are very small.

  I want to replace the matrix on FullHD.

  Model name: 20193
  MFG Date: 11/12/19
  S / N: CBxxxxxxxx
  P/N59354064
  Size - 15.6 screen.
  Matrix installed: LP156WH4 (TL) (N1)
  Loop fixed on one side with the inscription DC02001ME0JLUX1102AN000047E sticker
  And in other places.
  QIQY6 LVDS Cable
  DC02001ME0J REV. : 1.0
  LUXSHARE-TIC 10/12/22

  The display - 1366 x 768 resolution (that's the problem)
  Crux of the matter: matrix of Substitution FullHD (1920 x 1080)

  I was told that the ability to create loop - single channel.
  And I can not connect their FullHD matrix.
  Is this true?
  Double what it called channel?
  And I could set the matrix of 1920 x 1080.
  And what is the difference between them.

  My Lenovo Y500 laptop model
  Produced as one as I have 1366 x 768 screen
  and with FullHD. It is 100%.

  I got, powerful laptop with two Nvidia SLI 650 M 2 GB graphics cards
  And while such a terrible screen as the angles of vision and resolution.

  Please tell me the exact name of the desired pieces. I have already addressed on the site http://www.laptopscreen.tsom, told me that only these Lenovo support knows what I need to replace the ribbon cable matrix. A matrix has informed these - https://www.laptopscreen.com/English/screen-part-number/B156HW01% 20V.0.

  Please tell me the exact name of the desired pieces. Matrix of 1920 x 1080 compatible

  Cable - DC02000CL00 or DC02001ME0J or another for the FullHD and...

  Thanks in advance!

  Note of the moderator; s/n, edited for the protection of its own

  Problem solved. For all those who want to change the matrix on a laptop computer Lenovo Ideapad Y500 P/N59354064 on French Full compatibility matrix - Panel, 15.6W Wedge FHD LGD LP156WF1 - TLC1 FHD GW LED1 NB LCD p / n - 18200442 - no need for cables and change the matrix of change maps and reflections all work great!

• PowerEdge 2950 & SAS card compatibility

  We have a Poweredge Server 2950 W2K3 SP2 running. The server already has a PERC 5 / i controller as well as a card SCSI Ultra320 SCSI Adaptec 39320 a. is there a SAS card I could buy for this server and the ability to connect to a Powervault 124 t. with a SAS LTO-5 drive system?

  Hello Clamped_IT,

  You can put in a SAS 6 gb card in the 2950 & get the PV 124 t LTO5 to run because this is a valid configuration.  What you need to do is to make sure you have a 8 X PCIe available free map of SAS6gb must go to the 8 x PCIe.  Now according to risers that are in your 2950, they come in 2 different options, see below:

  Three connectors for expansion on two different mounting options:

  Two 64 bit/133 MHz PCI - X and 1 x 8 PCI Express full height, half length

  or

  2 x 8 PCI Express and a x 4 PCI Express

  Here is a link to our compatibility matrix & if you look at page 8, it shows you which card is necessary for a PV t 124. FTP://FTP.Dell.com/manuals/common/PowerVault-124t_Reference%20Guide_en-us.PDF

  Please let us know if you have any other questions.

• Cisco telepresence video Communication Server (VCS) - compatibility CTX X8.1.1?

  The Cisco TelePresence Exchange System compatibility matrix (CTX) does not cover version of VCS X8.1.1 (to solve the problem of software). Version X7.2 is recommended and supported which is affected by "heartbleed".

  X8.1.1 compatibility is tested by Cisco and the updated matrix?

  In fact we run CTX v1.3 with VCS X7.2 and solve the problem of software without leaving the support. What is the recommendation of Cisco?

  Kind regards

  C.Opwis

  You could improve your VCS to X7.2.3 which includes a fix for Heartbleed.

• Compatibility of 9148 MDS and HP HBA.

  Hi all

  The it Department is considering changing some HBA cards to some of our servers. The manufacturer of HBA cards is HP

  AP770B - HP 82 b PCIe 8Gb FC Dual-Port HBA

  AJ763B - 82nd HP, two ports PCI-e 8Gb FC HBA

  QR559A - HP SN1000E 16 P 2 Gb FC HBA

  AJ764A - HP 82Q 8Gb Dual Port PCI - e HBA FC

  We have a MDS 9148 switch that will be connected to one of these HBA cards. The it Department asked me to tell them if one of the above cards is compatible with the CISCO MDS 9148 material. I've been looking for a pdf or a document on the compatibility matrix, but I have not found anything. The question is: "CISCO provides a datasheet on the compatibility between the MDS 9000 switches and HBA cards matrix?"

  Thanks in advance for your help.

  Fernando

  Disk storage interoperability matrix

  http://www.Cisco.com/en/us/docs/switches/Datacenter/MDS9000/interoperability/matrix/Matrix1.html

  See table 1-2

  Thank you

  Responsible Dan

  Cisco IDP data center

  Need help with implementation?

  http://www.Cisco.com/go/pdihelpdesk

• Compatibility of ARMS

  Hi all

  My client has 11.2.3.500 with HFM, HP, FDMEE.

  Is it possible to install ARM 11.1.2.4? And in addition, BI Publisher within the same Foundation/workspace?

  I checked the compatibility matrix, but not found. Was wondering if its possible.

  If not, can I have another instance of Foundation - 11.1.2.4 with ARMS and BI Publisher and merge the 2 workspaces, in the end URL only 1?

  Thank you

  See you soon,.

  Rafael brands

  Yes that's correct.

• JDeveloper compatibility with Oracle database v12.1.0.2

  What version of JDeveloper is compatible with the v12.1.0.2 database

  JDeveloper is a Java IDE and has no compatibility with databases.

  ADF is a framework - it is certified against different versions of the database. If you simply Google "Compatibility matrix Jdeveloper" you will find the answers you are looking for. Information on certification

• FDMEE 11.1.2.4 compatibility with Shared Services 11.1.2.3.500

  Hello

  I wonder if FDMEE 11.1.2.4 can coexist in a 11.2.3.500 environment.

  I've read of the oracle certification matrix, but I don't know if I'm doing things.

  Best regards

  Basically, no he can't even without looking at the compatibility matrix

  See you soon

  John