Compatibility of the part

Similar Questions

• Compatibility of the broken keyboard Pavilion dv6

  Hello

  I have a keyboard broken on a:

  Laptop HP Pavilion dv6-6110ez (LS222EA)

  I checked the keyboard is faulty by testing virtually everything and then disconnected - manic BIOS, beep stops. In the contrary case, the PC boots, so it bascially functions and also perfectly fine.

  There are also a few messages in the forums with similar symptoms - false characters appearing, "auto-repetition", etc.. Seems to be a classic problem, but makes the PC unusable without an external keyboard.

  The replacement part is 640436-BG1 - Swiss layout (the original HP & Flextronics P/N is 634139-BG1).

  But this part is not available to the user of part of HP or through HP replacement parts shop, or at the local (Switzerland) offical HP parts supplier.

  The exact part is available from 3 Parties at an apparently inflated price, but not locally (--> customs issues!)

  I can get a similar piece (570228-111) from a local supplier at a price reasonable. They claim that the compatibility is a fairly wide range of HW dv6-6xxx and 7xxx dv6, dv6-6110sw dv6-6117eg, which seem to correspond to the models mentioned in the service and maintenance guide relevant dv6 and (http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf).

  The local official HP supplier can also deliver this one but wouldn't listed no compatibility.

  Keyboards are certainly pretty standard and interchangeable enough individual within the same range of models (makes economic sense), if someone can give me some advice on what replacement keyboard would work in practice?

  Work P/N 570228-111?

  Thanks in advance.

  -Patrick

  Thanks for the tip, this is the cheapest around a good margin, but they offer only in the United Kingdom and I live there :-(

  He also says "Call for availability", hmmmmm...

  I think I'll just grit my teeth and pay the "part replacement premium" after all. At least the 'proper' Party will certainly work.

  -Patrick

• A surefire way to access to the part of my PHOTOS of the iphone, the Web, Safari?-on icloud backup

  I regularly backup on iphone and ipad with icloud.

  I don't know how to access the part of this backup on my Safari browser on iphone.

  icloud.com url only works on a Windows laptop

  Thank you

  Geoffrey

  You can not see what is the backup, but you can access the backup itself - iCloud: restore or implement your iCloud iOS device

• When using on the part of the family can they others besides Organizer individual payments?

  When using on the part of the family can others besides the Organizer make individual payments without using the card of the organizers?

  Family sharing makes it easy for up to 6 people in your family share each other iBooks, iTunes and App Store purchases without sharing accounts.

  "Pay for purchases with the same credit card families and approve kids' expenses directly from the device of a parent." And share photos, a family calendar and more to help keep everyone connected. »

  Implement the family sharing - Apple Support

• Sorting files in folders from the parts of a file name

  Hello

  I have a library of images that I need to build to work. The images have been recorded as this for example

  Dolce & Gabbana - the One_EDT_50ml.jpg

  There are 1000's of brands, so I need a script that looks for the part of the file name before the hyphen. and create a folder based on all the images that fall under this brand.

  If anyone can help?

  I've never used script before, but any solution I can work with that will work for me.

  Thank you

  Use the following syntax:

  Tell application "Finder".

  Repeat until (files window count 1) is 0

  the value the_offset to compensate for the "-" (get the window 1 1 file name)

  the value the_name items 1 thru (the_offset - 1) (get the filename window 1 1) as string

  move (all files 1 window whose name begins with the_name) (making the new file to the window 1 with properties {name: the_name})

  end repeat

  tell the end

  (143816)

• I was on Redbox and accidentally disabled the part location function. How to re - activate this?

  I was on the site of Redbox and clicked on DVD to find nearby and accidentally disabled the part location function. Anyone know how I can reactivate this function?

  You can also check specific permission settings by using the permissions of the Page Info dialog Committee. While on the site, you can call this using one of these:

  • Right click and select View Page Info > permissions
  • (menu bar) Menu Tools > Page Info > permissions
  • Click the icon of padlock or globe to the left of the address of the site > additional information > permissions

  Scroll down and look for "access your location. If it is set to block and you want to enable it, you can make the change. (If necessary, uncheck the box to activate specific use default settings.)

• The part of the address of the message writing window TB can cause its own adjustable frame in size as in previous versions of TB?

  In older versions of TB the part of the address of the message entry window had its own adjustable chassis. It was useful that you could develop the image to see all addresses at a time and avoid errors of sending emails to the wrong people, especially when you reply to all and to remove some addresses for example answering users in the company, excluding visitors to learn sensitive information.

  In the recent release you can only see three lines of e-mail addresses and use the scroll bar to see the rest of them, but you may miss the addresses during scrolling up/down. He needs more time to verify that the necessary addresses are there and it is not effective at all.

  Can someone restore the setting of the address in the window of writing? Is there a plan to change this in future versions?

  Please note that I use Thunderbird on Windows XP platform

  Yes! Just below the slider bar formatting changes and you can increase the size of the email address area to see more addresses.

  However, I liked the old style better which was more intuitive. Anyway, there is a way to do the job.

  Thank you very much!

• I want to import any small part of MP4 long clip. Can I cut the part I want beforee I import it? Jut import little clip

  I want to import any small part of MP4 long clip. Can I cut the part I want beforee I import it? Jut import little clip

  These are my own productions of the hour and a half and I want to participate just 5 minutes. What I have to import all this or can I cut it before.

  If I have to import it. How can I remove unused rest

  Look at the function EDIT here. Copy /Paste

  How to use QuickTime Player - Apple Support

• The part 'From' the display of Thunderbird should not be transparent.

  Transparent bar mail, it is difficult to locate the gap between the header of the e-mail message and mail lists above the header of the e-mail message. The part 'From' should not be transparent. This is a recent problem, does not appear in the old version

  32 version was released and the issue is resolved, so it was a bug in Thunderbird. Thanks for your help. I'll mark this as resolved.

• I love Personas, but I can't figure out how to display the part of the image that can be displayed at the bottom of the window; How can I activate this part?

  Beautiful image shows the upper part of the window, where the toolbars. But the part that can be displayed at the bottom of the screen (above the taskbar (I think it's called?)) does not appear and I can't remember/find a way to work in so that it is displayed too.

  "Personas" are basically dead. The name was changed to 'Lightweight thèmes' and the Mozilla seems to have lost all interest in this feature. IMO, it is corporate ADHD - build, promote, many users ignore the hook on the feature, of it do not continue to "show the love" and in two or three years 'kick on the sidewalk.

  Basically, the add-on bar went in Fx29 - so there is no image at the bottom. There is an extension that restore the bar of the add-on, and it seems that it supports Personas - based on the screenshots on the page to download add-on.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/the-addon-bar/

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Wouldn't be nice if we could see Apple TV compatibility in the App Store?

  Wouldn't be nice if we could see Apple TV compatibility in the App Store?

  TT2

  Leave comments for Apple to http://apple.com/feedback/appletv.html.

  Furthermore, Yes, that would be nice.

• How to get Firefox to check the compatibility of the addon first, then ask me if I want to continue the update of Firefox?

  How to get Firefox to check the compatibility of the add-on first, then ask me if I want to continue the update of Firefox? The update process currently only told me that an add-on has been disable after you apply the update to Firefox. Options > Advanced Options > switch to the update tab, "Warn me if this turns off one of my modules," doesn't seem to work.

  delores51

  This is an add-on that does this.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/is-it-compatible/

  More specifically, what modules are always appear as incompatible after a Firefox updated? Firefox 10, extensions that are made properly shouldn't be a problem, with a few exceptions.

  Extension that contains a binary code must be compiled for each new version of Firefox. These modules are usually installed by applications on security Norton, McAfee, ZoneAlarm, etc..

• Select the parts of a clip in a project in iMovie?

  I used to be able to do this, very easy, but when I opened my iMovie last night I wasn't able to select parts.  Now, it seems to select the clip and I don't want to do that.

  Is there something I need to change in my preferences - or changed iMovie and select only the parts of a clip is no longer an option?

  Thanks in advance,

  David

  You're supposed to now hold the "R" key while selecting a part of a clip.

  See this discussion: Re: having to hold R to select a portion of a clip

  

• Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

  Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

   Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
  

  Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...