Compatible USB 3.0 device (PCIe card)

Similar Questions

• Compatible HP Slimline s5304y ethernet PCI card

  Where can I find a way to buy a PCI ethernet card compatible with my HP Slimline s5304y? My USB ports and ethernet were fried during a thunderstorm and not more working time. The PC functions as it did before the storm, with the exception of the ethernet and USB ports. Thanks for your help!

  Hello

  99.99% of them are now series, you can probably buy anything on the market. Here are a few:

  http://www.MyShopping.com.au/PR--8180_Belkin_F5D5005au_Gigabit_Desktop_Network_PCI_Card

  Kind regards

• Pavilion P6520F: p6520f driver usb 3.0 pci card

  To make a long story short, with assistance from HP Support Forum's, I've recently restored to my Pavilion P6520F leave an 'upgrade' forced Windows 10, back to Windows 7.  Unfortunately, when I accidentally upgraded to Win 10, my card usb 3.0 pci card decided to die in the transition (not compatible with Win 10).  I replaced the card with a PCI-E DEGOL Express USB 3.0 Card 4 Ports and power connector 4-pin 5V for desktop computers [ASIN: B01FUE7IS2].  The map loaded and worked like a champ... Until I started Windows 7.  Now Windows 7 can not find a driver for it, and provided driver disk will not load a driver for Windows 7.  I contacted the seller, and they assured me that the card must be compatible Windows 7.  Is there a generic driver online of these cards USB 3.0 can I load to bring back my new card?  Unfortunately, I threw the old card, if I can't relive the Degol map, I'll have to buy a new card.

  All advice appreciated!

  Hello

  USB for Windows 7 drivers are the supplies made by the manufacturer of the card.

  You must debug the problem if the DEGOL W7 driver does not load. Generally, you will see an error code in Device Manager for your USB card. This could give you some advice.

  HP is not post drivers for third party material.

• ASUS USB 3.1 PCI card in the Mac Pro 4.1/5.1

  Hello

  As the proud owner of a Mac ro 4.1 (updated to 5.1 and 2 X of Hexa-Core Xeon X 5670 CPU) I "suffer" a restriction.

  And it is now old and really slow USB 2.0.

  I would like to add a PCI USB 3.1 and I spotted the ASUS USB 3.1 PCI card.

  Of course, this card is given only as compatible with Windows...

  But I've seen a few reports of people claiming to have inserted this card in their Mac and have used successfully with several devices.

  It seems that these reports are under "Yosemite".

  I was wondering if they are always good with El Capitan...

  I put the card in the Mac.

  It seems to be recognized by the Mac Pro.

  In fact looking at the system information, under "PCI" give "Expansion USB card".

  BUT:

  -No USB key I have insert mounts;

  -No USB stick plug mounts;

  -my mouse lights

  -the keyboard does not work...

  So I'm wondering if:

  -El Capitan has got rid of the first USB support 3.1 to Yosemite?

  - Or if my card can be default somehow?

  -If this behavior can be caused by updates, I made (Mac 4.1-5.1 online) + 8-Core CPU-online 12 Core CPU?

  If anyone would be able to help me, I would be eternally grateful :-)

  If so, the card can be sent to the seller...

  Kind regards.

  FRED

  Hello there Penguiner.

  Looks like you bought the ASUS USB 3.1 PCI card and questions about its compatibility with your Mac Pro. The following Knowledge Base article speaks to the maps provided by Apple which have been tested and work with the Mac Pro:

  On the compatibility between Mac Pro-carte models graphics

  Since the ASUS card is not listed, the reference of the article could be a good recommendation to follow:

  This article applies only to video cards that originally shipped with a specified Mac Pro or upgrade kit have been offered by Apple. Similar maps that are not provided by Apple may have compatibility issues and you have to work with this card provider to confirm compatibility.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• HP Pavilion HPE h8-1150z CTO D: which USB-3 PCI Card

  I would like to upgrade computer (add) USB-3 to my existing. Which USB-3 PCI card (make and model) would be compatible with my computer?   Is there anything that should be avoided?   The card may only be installed or is there some other changes/upgrades necessary to make it work correctly?

  #HPExpertDay

  Yes, you can add USB 3.0, but it would work in 2.0 as the motherboard must be able to do.

  So you would need a powered USB hub.

• Remove a desktop USB 3.0 PCIe Card Questions in an HP e9200z

  Hello

  I have a:

  HP Pavilion Elite e9200z CTO desktop PC
  Model name e9200z
  Product AW017AV-ABA number
  Software Build 94NAv6PcA4

  Name of Microsoft Windows 7 Home Premium (64-bit) Edition
  Build number 7600
  Version of DirectX 11

  Motherboard
  System Board
  Chipset AMD RS780/RS880
  AMD SB700, SB710/SB750 Southbridge
  Box spring
  Manufacturer FOXCONN
  ALOE products

  BIOS
  The vendor American Megatrends Inc.
  Release Date 11/09/2009
  Version 5.03 BIOS string
  ROM size 1.00 MB

  AMD Athlon (TM) II X processor 4 620
  Name AMD Athlon (TM) II X processor 4 620
  Hearts 4
  Son 4
  Temperature C 22.00
  The current 2.60 GHz speed
  Multiplier x 13.0 (4.0 - 13.0)
  Features (+) MMX, 3DNow! (+), PSE36, x 86-64, SSE, SSE2, SSE3, SSE4A, NX, SVM
  L1 Cache of Instruction 4 x 64.00 kB
  L1 Data Cache 4 x 64.00 kB
  L2 4 x 512.00 KB of Cache

  Video card
  NVIDIA GeForce G210
  Adapter Chip Type GeForce G210
  512,00 MB video card memory
  Video card in the BIOS Version 70.18.9.0.10
  Driver c:\windows\system32\drivers\nvlddmkm.sys
  8.17.12.5936 driver version, 08/08/2010

  I installed a Western Digital SuperSpeed USB 3.0 PCI Express (PCIe) card. Then I discovered that my diet was already within its nominal capacity output when the computer was shipped. Now, whenever I have a USB device that is connected to the computer, it didn't matter if it is a USB 2.0 or 3.0, the chart shows a decline in the quality whenever I would like to start or restart the computer. If I start the computer without any device USB 95% of the time it would start the graphics in the way it was supposed to be. With the clarity of high definition. I know that I must remove the PCIe card, but my questions are:

  1. If I just uninstall the drivers and let the PCIe card in place if it will still support power?

  2 should I replace the power supply, after you fix this problem?

  3. is there a way to test the power subsequently to ensure that it is correct?

  4. If the withdrawal of the PCIe card is the best method. What is the procedure to remove? Out the PCIe card and uninstall the drivers through the Device Manager? If so, in what order? Card PCIe controller driver, driver finally hub?

  5 leaving the drivers installed and just released the PCIe card be a better idea? If ain't broke don't fix it...

  6. If I let the drivers installed, but get out the PCIe card drivers would say the power supply to power again?

  7. If I take the PCIe card that you call the part that I'd buy that connects to the hole in the back of the tower and what size would I get?

  Thanks for your help! Even if you can only answer some of my questions, feel free to jump in.

  Replacement of the power supply is a common practice. It's a question that is asked constantly. If your power supply is at the maximum, then replace it. It is not all that difficult to accomplish. Even a slight upgrade with a 85% effiecient PSU is a plus.

• PCI cards with USB 3.0 or eSATA for a Mac Pro 2006 (1,1)

  Hello, Apple people!

  I got my hands on a Mac Pro 2006 earlier from a friend. I used it as a BESTIAL Server (seriously, this thing is not so much as breaking a sweat even when I throw it the more difficult task.) I love this machine) since I got it, and I think I want to do the updates. My plan so far is to get multiple mounting OWC to pick up the second drive Bay currently vacant DVD and install two 120 GB Samsung 850 EVO drives in RAID 0, while using the real HARD disk bays for a RAID 10 array (nested RAID: two RAID 1 arrays brought together in a RAID 0 array) of four 2 TB red WD drives and use two 250 GB hard drives currently in the machine in an external case in a matrix RAID 1 for backup. I'm pretty happy on this issue.

  My question concerns what interface to use for external drives of 250 GB. I can use:

  • USB 2.0 currently on the machine
  • FireWire 800 currently on the machine
  • a PCIe USB 3.0 card
  • a PCIe card with eSATA

  That we will get the faster speeds? I know that, theoretically, eSATA would get faster speeds (6 Gbps eSATA vs 5 Gbit/s USB 3.0 vs 800 Mbps, Firewire 800 vs 480 Mbps USB 2.0), however I know also (maybe?) that the Mac Pro I have only has grooves in v PCIe 1.1, with a (supposed) 250 MB/s maximum data transfer rate. would this bottleneck a PCIe USB 3.0 or eSATA card not worth?

  Note: don't worry all "Mac compatibility" with PCIe cards (or the table RAID scheme I mentioned). I am running Ubuntu Server (64 bit) on the machine, and given that the Linux kernel supports much more conductive than Mac OS X, I probably don't need to look at all the other drivers. This issue is specific to the hardware capabilities of the Mac Pro.

  Probably the most simple installation, you can do is to install the eSATA extender cable adapter.

• Satellite A30-203 - need compatible WLAN mini PCI card

  Hello

  I've had my laptop for several years now and have only just signed up for wireless broadband service. My Satellite A30-203 can be improved internally with a mini PCI card (I checked the back) but where I can get a compatible?

  Authorized distributor of parts for Toshiba in my country seems to be outrageous to say the least and are insistent that I send my laptop for them to him have mounted that seems excessive. I also checked the Web from Toshiba site without a bit of luck. Anyone know the part number for a card compatible with my system and where I can get one?

  Thank you

  Post edited by: gadams

  Hello

  I found this Forum thread and someone suggested that Wireless LAN Card Kit PA3212U-1MPC should be compatible.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17955

  Google a bit for this part number

• What is the correct USB 3.0 PCIE card for Z800?

  I am looking to buy the correct USB 3.0 PCIe card for a Z800, but I can't find any HP thru. Anyone has the info > 12 and 60 cards HP dollar on EBAY, but I don't know if those who are good.

  Hello

  Based on the following specifications, the machine has a lot of options:

  http://h18000.www1.HP.com/products/QuickSpecs/13278_na/13278_na.PDF

  You can buy 1 port card, map 2 ports, card port 3 or even 4 ports card such as:

  http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-PCI-Express-SuperSpeed-USB-3-card-adapter~PEXUSB3S2

  You should check the slot to get the support of the card right.

  Kind regards.

  PS eBay is another story, you can buy some card dollars.

• Device PCI C710TU Presario driver not found

  I recently formatted my Presario C710TU laptop and installed Windows XP Professional with Service Pack 3 and have had a bit of pain installed all the drivers... I have looked around the internet, the search, but was left speechless for days. Here are the details of the number:

  I have no sound at all and in device manager it is a lack of "PCI Device". I tried several drivers all with the result (not verbatim) "the MEDIA device is not found" which is most likely the wrong driver completely.

  My laptop did not come with any CD

  Here is a picture of Device Manager and other relevant information: http://i40.tinypic.com/iftlkg.jpg

  This is a text version of what is shown in the image:

  -Missing "PCI Device" - provider 8086 (Intel), 284 b, SUBSYS_30D9103C, REV_03 device, 3 & B1BFB68 & 0 & D8

  -Info-motherboard: 30 9 model

  -Chipset: Intel | GL960

  -The Intel Southbridge. 82801HBM (ICH8-ME)

  -Dxdiag: Notes show that no sound card cannot be found and that the drivers are needed.

  -Others: It has no volume icon in the bar that shows no audio device tasks.

  Here are a few drivers, I tried:

  sp32823 - Conexant High Definition Audio Driver 3.18.0.50

  sp36090 - Conextant CX20549-12 high definition audio driver

  sp34200

  sp33867 - Microsoft universal audio architecture bus driver for high definition audio

  That is all the information I can think to mention about the situation.

  Bandaids and free coffee did not yet make the laptop fix it's me, so it might be difficult, so thanks in advance for any help to find my cat lost... uh I mean fix my laptop...

  XP drivers for your model:

  Chipset here (first install it and reboot)

  Intel Matrix Storage Manager here

  Intel 965 graphics here

  Wireless Intel 3945 ABG here

  Realtek RTL8139C here

  MS-UAA for SP3 (required with a reboot before the Audio driver and Modem) here

  Conexant High Definition SmartAudio 221 here
  
  Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
  Not to communicate,
  Install from a list or specific location,
  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when it complains.
  Reset.

  Conexant HDAUDIO Soft Data Fax Modem with SmartCP Driver here

  .NET framework (required before HP Quick Launch Buttons) here

  HP Quick Launch buttons here

  USB mass storage device here

  Alps Touchpad here

• The BIOS of my dv2610us stop me from changing my mini-pci card?

  is there a white list in my bios that would prevent me from changing the Broadcom BCM4311 for a mini-PCI with my choice?

  I have read several posts on the forum who said their model of HP had limitations in the BIOS but they were all pretty old, and I hope that HP has changed their policy on this.  I can understand the blocking for overclocking settings, but this seems a little extreme.

  I contacted the support of discussion about this today, but I had the strong feeling that he did not know what in the world I was talking (but he offered to sell me the same wireless card that I told him that I wanted to replace...)

  I edited my name on...

  dirtsandwich: The dv2610us has a 'white list' on the bios that blocks some install mini-pci cards?
  [An agent will be with you shortly.]
  [You are now chatting with Shane].
  Shane: Hello dirtsandwich.
  dirtsandwich: Hi Shane.
  Shane: Welcome to HP Total Care for laptop, my name is Shane. Please give me a minute while I quickly look at the description of the problem.
  dirtsandwich: no problem
  Shane: dirtsandwich, could elaborate you on this issue, so that I can help you better?
  dirtsandwich: sure no problem.
  Shane: Thank you.
  dirtsandwich: I tried to buy a new mini-pci card to replace the broadcom wireless card that came with my dv2610us. I read on some sites that have a white list on the BIOS that allows specific models of wireless cards to be installed in some models. If the model is not on the white list, then you can not install it.
  Shane: Of course, I understand and regret the inconvenience. And I got my best efforts to solve the problem in a timely.
  Shane: To help you in a better way, may I know the product and serial number of the laptop that is facing this problem?
  dirtsandwich: I have the dv2610us. SN is XXXXX
  dirtsandwich: product is XXXXXXX
  Shane: Thank you for providing us the information.
  Shane: dirtsandwich, may I know you bought the new wirless card from outside the HP device?
  dirtsandwich: not yet
  Shane: Well, you want to buy. Fix?
  dirtsandwich: no, I want to know if the BIOS has a whitelist which will prohibit some installed wireless cards.
  Shane: Alright.
  Shane: dirtsandwich, I understand your request.
  Shane: If I understand the question, yopu desire to know who's here, any white list is available in the BIOS on this laptop, I'm wrong?

  Shane: * you
  dirtsandwich: Well... is not available. I just want to know if HP has put one in the BIOS
  Shane: Well, there's no white list will be available in the BIOs.
  dirtsandwich: so if I buy a third mini-pci card it should install without problem?
  Shane: Only we have some parameters like sound, VGA etc, you can disable or enable.
  Shane: Is it an external wireless card, you can insert it via USB?
  dirtsandwich: no, it's a mini-pci pci-e card.
  dirtsandwich: here... read this... that's what I want to do.
  dirtsandwich: http://h30434.www3.HP.com/PSG/board/message?board.ID=Internet&thread.ID=701
  Shane: dirtsandwich, please give me 2 minutes while I wil chech this in my database.
  dirtsandwich: or this http://forums11.itrc.hp.com/service/forums/bizsupport/questionanswer.do?admit=109447626+124323708840...
  Shane: Well, I read it, thank you.
  Shane: Thanks for being online. I appreciate your time and the patince.
  Shane: dirtsandwich, I checked in my resources, and I subscribe to tell you that you can connect the Mini-PCI Wireless card in your laptop.
  Shane: And you can buy this from HP.
  dirtsandwich: HP operates a base of Atheros mini-pci cards? When HP started to remove from the whitelist from the bios?
  Shane: dirtsandwich, I am researching on this Yes, you can be online for 2-3 minutes.
  dirtsandwich: ok
  Shane: Thank you.
  Shane: Thanks for being online. I appreciate your time and patience.
  Shane: dirtsandwich, here is the description of the compatible with you laptop wireless card.
  Shane: Wireless 802. 11 b / g mini PCI card (Broadcom, Hoya) adapter - data rate of 54 Mbps, 2.4 GHz bandwidth operation (most of the world)
  dirtsandwich: ok. It's a Broadcom, which is what I am wanting to replace.
  Shane: Yes.
  dirtsandwich: Does that mean that it is the only card that offers HP?
  Shane: dirtsandwich, your laptop comes with this wireless card and HP doesnot recommends change internal maps.
  Shane: Yes.
  dirtsandwich: Well it's maybe, but the broadcom chipset does not support some features that I use, and I don't want to carry a USB adapter more.
  Shane: dirtsandwich, if you want I'll go ahead and order t for you immediately.
  dirtsandwich: Why would a wireless card that I have order? I think I'm ok. a good night of Shane.
  Shane: He'll gave you all the features that is compatible with youy notebokk, SPÖ please don't worry.
  Shane: Well, I thought you want to buy it now.
  Shane: Is there something else I can help you with today?
  dirtsandwich: no thanks.
  dirtsandwich: bye.

  Hello

  I'm sorry but the HP policy is still the same.

• Satellite 2450-101 Mini PCI card please

  I have a Satellite 2450-101, which is longer under warranty. I upgraded the memory and noticed a mini-pci slot with two waiting for a card antenna cables. I need a g card (the 3300 looks like a good bet). The manual refers to a mini-pci slot and the CD from the laptop comes with Atheros drivers for the same... I am currently using a PCMCIA card but want to spend money with Toshiba to get a good onboard solution. I called Toshiba who say that he is not a slot in my laptop... Please please don't refer me to a partner because I've never actually talked to one yet. Honest answer please... can I mount a mini-pci card... is the 3300 OK, and how do I join the cables (if this is difficult, I won't)...
  Thank you

  Hello

  I found information that your device is ready for the Mini PCI Wireless card. As you know on the wireless card there are two connectors that are marked of PRINCIPAL and auxiliary normally a white cable goes to the ESSENTIAL and a black to the auxiliary voltage

  Sorry, but I can't tell you exactly what wireless card will be the best for you. In my opinion, you should contact partner in your country. I'm sure they can give you correct information, which is compatible with your device and how much it will cost.

  Good luck!

• How can I install a full-size pci card in a Slimline desktop environment

  I got a s5623w computer Slimline of office for a gift.  A year later I wanted to install a pci card hardware to capture analog video and transfer it to digital to my computer.  Well, I've been very disappointed and found that the map is too long.  What type of equipment or upgrades can even installed in the slimline computers anyway?  Is there a way for the size to connect to this computer?  The material I want to install has taken to a VCR and a port IEEE 13694 (who was left out of this model, why I have no idea) is it possible to install it or did I just lose a lot of money.  Or is there a special place to purchase these short hardware PCI cards?

  Please consider using a video capture device / USB like these for VCR (analogue) type signals. In regards to a Firewire/1394 card, consider the SYBA Low Profile PCI-Express 1394 b/A, StarTech PEX1394B3LPor SIIG FireWire 400 PCI Express x 1 rack w/LP

• Portege R100: Bluetooh/WLAN 802 .11b/g Mini pCi card Combo available

  Hello

  does anyone know of a Mini-PCI solution, which combines a b/g WLAN Card with Bluetooth which is compatible with the R100?

  My new laptop has a bluetooth connection and a nice combination of WLAN/BT integrated in the R100 would be also cool that the R100 is. There are a few Combocards on eBay that are Mini-PCi cards, but I don't know if "mini-PCI" is a standard for all Mini PCi cards adapt the R100...

  Concerning

  Christian

  Hmm, I searched a bit for some information on the Portege R100 series and it seems that BT is not available and not extensible. This would mean that there is no room for the internal minPCI BT module.

  The WiFi network is available but not BT ;(

  In my opinion, you need to use an external solution such as a stick USB BT.

  Best regards

• Network/slot PCI card

  I need to buy a new network card for my HP Pavilion a6403w desktop computer.  The current I is integrated, but must be replaced.  I need to know what to buy, so it is compatible.  I just bought one, and it does not fit.  Can anyone help?

  Thank you!

  jndwoodbury wrote: I need to buy a new network card for my HP Pavilion a6403w desktop computer.  The current I is integrated, but must be replaced.  I need to know what to buy, so it is compatible.  I just bought one, and it does not fit.  Can anyone help?

  Hello jndwoodbury, here is a link to the specifications for your system. It shows that it will support a PCIe both an old PCI card.

  I don't know other types of network cards in motherboard, so I wonder why the one you bought will not work.

  You need to unplug the power cord, remove the side panel and make sure you have one of these locations addon.

  When you install the new network adapter, I suggest to enter BIOS and disable the on-board, network device just to make sure that there is no comflicts with the new network adapter.