compiled VI works not on the same PC, when running as VI works fine

Similar Questions

• Can I use an antivirus on each of my hosts and guests at the same time when running a virtual environment on my PC?

  I have Windows 7 running on my main computer at present and that you have a virtual environment installed as an operating system on this computer very.

  I would like to know if I am able to run an internet security on my pc (Windows 7) host program and other internet security on my guest in my virtual environment operating system (pc windows 8)... at the same time.

  I ask this question because... I installed my OS of windows 8 in a virtual environment running inside my Windows 7 OS in order to familiarize yourself with the features of windows 8 and to test the compliance of windows 8 with various hardware components I use... to satisfy my curiosity before I migrate eventually completely to windows 8.

  Part of my tests would involve various software including Internet security applications.

  So the question is... I was able to save my virtual environment with an Internet security program, while having an Internet security program running in the host computer?

  PS my environments hosts and guests are not put networked with the exception of the common external drives and dvd burners. The plan being that the Internet security on my host computer program will have my analysis excluded virtual environment.

  Yes

  The systems are completely separated from each other, will not affect the different AntiVirus on another product.

  If you decide to test another Internet security program don't forget to completely remove the old version on the virtual machine

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Can not find the .bss files when running

  Hello
  
  I used Eclipse to create an executable Jar of my FX project.
  When I try to launch the Jar executable, I see the following exception:
  java.net.MalformedURLException: cannot open InputStream for URL "rsrc:css / myapp.bss".
  
  I looked inside the jar and saw a myapp.css in the css, but not myapp.bss directory.
  I read here (http://docs.oracle.com/javafx/2.0/deployment/packaging.htm) which says conversion of .css to .bss is optional.
  
  Is it possible to say my app just use the .css file and do not have the .bss file?
  
  
  Any help is appreciated.
  Thank you.

  It would seem that Eclipse (or something else) is something strange with the ClassLoader to use a weird Protocol.

  Maybe this StackOverflow response can help you: http://stackoverflow.com/questions/7507156/java-net-malformedurlexception-unknown-protocol-rsrc ' java.net.MalformedURLException: unknown protocol: rsrc ".

• Why objects copied from illustrator vector cc do not stay the same size when pasted in pho

  I think that the problem started with the latest updates. Work normal flow of copy and paste no longer functions properly.

  Photshop changes the dimensions of the vector illustrations copied from illustrator and pasted in photoshop.

  If I start with a 6 x 6, vector shape in illustrator, then select copy, I should be able to enter in photoshop, select file and then new.

  and the document should automatically extract the dimensions of the Clipboard. For some reason any 6 "x 6" opens a 0.6 x 0.6 in document.

  Even if I manually change the document to 6 in. x 6 in., another thing I copy for more than 6 x 6 gets its dimensions changed to fit inside the illustrator document. I cannot copy and paste a 10 x 2 vector in 6 "x 6" document without changing the dimensions of photoshop

  If it fits inside the document. Any ideas on how to fix? Thank you.

  Hi Kelly,

  I think a number of things are colliding together. Looks like your main concern is that pasted files are to be resized to fit existing document limits, correct?

  There is an option in the preferences to disable this behavior. Do you know if you have this option unchecked

  

  Kind regards

  Steve

• Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Hello

  Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.

• Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  It's a delicate issue... like some patches cannot stipulate pitchbend...

  But to quickly test your pitchbend wheel actually works properly...

  Download the free lunch monitor...

  Snoize: MIDI Monitor

  Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.

• When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

  When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

  Hello

  Check with the manufacturer of the system, their online documentation and drivers, diagnostics, and
  Ask problems known in their forums. You may also check those similar
  resources on the site of the manufacturer of the actual device (for the original drive).

  =================================================================

  It is not surprising that the same issue affects the old and the new drive.

  This problem may be caused by the presence of too many CD/DVD programs competing for resources,
  especially by these programs that run at startup.

  Even if the error is not Code 22 check these:

  Code 22
  http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspx

  How to fix the Code 22 errors
  http://pcsupport.about.com/od/errorc/a/code-22-error.htm

  How to enable a device in Device Manager in Windows Vista
  http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htm

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

   

• CTRL + left click is not always the same as the Middle-click

  CTRL-click is supposed to open a new tab, but this does not always happen. For example in a YouTube channel, a video in the sidebar (or right-clicking and selecting new tab) Middle-click opens the video in a new tab, but ctrl-click opens in the current tab. Y at - it a fix for this?

  These links are that JavaScript links (according to elegant), which do not respond the same as ordinary hyperlinks.

  I have a userstyle installed in Firefox that adds a 'J' cursor 'hand' on most of the JavaScript links, and tells me that I need to way - click on these links - cause {Ctrl + click} will not work.
  
  http://userstyles.org/styles/233

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• inputText and ouputText does not display the same value

  Hello

  JDev 11.1.2.4

  On my page, I have an inputText and outputText bound to the same link of the attribute. The bind value is defined in a value change listener, and then the two components are updated. Say I put in 2009 for the PeriodFrom, the inputText remains empty, but the outputText shows the 2009. How is possible that the two items related to the same link does not show the same value.

  < af:inputText value = "#{bindings." PeriodFrom.inputValue}"required =" #{bindings. " PeriodFrom.hints.mandatory}.

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  < f: validator binding = "#{bindings." PeriodFrom.validator} "/ >"

  < / af:inputText >

  < af:outputText value = "#{bindings." PeriodFrom.inputValue}"id ="ot3"clientComponent ="true"/ >

  Furthermore, I tried to get the RichInputText component and call a getValue on it, and the value returned is 2009. I'm completely lost.

  Thank you

  I made the fragment of page from scratch. I discovered why the update does not work. This is because the selectOneChoice is inside an af:subform. If I remove the subform, the update works correctly.

  shortDesc = "#{bindings." StdcntyCode.hints.tooltip}"id ="soc2"simple ="true"autoSubmit = 'true '.

  valueChangeListener = "#{pageFlowScope.identificationSessionEditBean.countryValueChangeListener}" > "

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  columns = "#{bindings." PeriodTo.hints.displayWidth}"shortDesc =" #{bindings. " PeriodTo.hints.tooltip}"id ="id2 ".

  autoSubmit = "true" simple = "true" >

• Using the same virtual machine on two macs, but not at the same time

  Hello

  I searched this site and the Internet in general, but I couldn't find an answer to this question, so my apologies if this is requested before and if so, please point me to the answer.

  I have an iMac with Bootcamp with Windows 7 Professional x 64 partition and everything works fine.

  I would like to install 6 Fusion and create a virtual machine from the Bootcamp partition, try it for a while and then delete the Bootcamp partition. I found a complete documentation about this and I should be able to do this without any problems, except perhaps for the reactivation of Windows.

  Now the question: since I move sometimes, I would like to be able to move this virtual machine on a Macbook Pro, so I must not move file, sync, etc., and the virtual machine will not at the same time. I read that you use Move so the address UUID and Mac do not change, but I don't know if this applies to move the virtual machine to another computer. If my is:

  (1) is it possible?

  (2) what I have to buy a second copy of Fusion 6 or there is a player that will allow me to run the virtual machine on the macbook?

  Thank you

  Luciano

  I have experimented with a Windows 7 VM, copied (but I have 2 licenses of retail sales) a mini Mac Core 2 Duo to a Core i7 MacBook Pro retina: well, despite the different processor, he did not ask a reactivation, strangely, even after a few resets. Windows 7 so, seems at least to be quite "tolerant", on this front.

• I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

  I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

  You know the e-mail password what do you use? I lost over $ 30 on my old Apple ID because I couldn't get into the email and apple would not transfer my money to my new account.

• why I can not get the same apps I have on my iPad?

  why I can not get the same apps I have on my iPad?

  Because they are different versions for different operating systems.

• Notes, not in the same Apple account synchronization

  My user's devices: iMac iPad iOS 9.3.2 and iPhone iOS 9.3.2 10.11.5,

  It has 2 accounts iCloud: [email protected] and [email protected]

  The iMac has only [email protected] configured as the main account iCloud.

  The iPad has [email protected] configured as the main account iCloud and [email protected] as one account secondary iCloud

  Its iPhone has the configured as the main iCloud [email protected] and the [email protected] account is configured as a secondary iCloud account

  Notes is enabled on all devices and in all accounts.

  Here's the complete bizarreness...

  Notes [email protected] on his iPad and its application of iMac Notes are the same and full synchronization, BUT in the Notes of [email protected] on his iPhone is different most are and DO NOT synchronize with its iPad or iMac.

  I'm puzzled.

  Other notes & comments:

  -Notes are not saved locally on any device

  -Although [email protected] is the account main iCloud on this iPhone, the default account for the notes is [email protected]

  -When his signs in [email protected] to iCloud.com, notes to the Notes site iCloud application are the same and are in complete sync with iPhone [email protected] account ONLY.

  -If a [email protected] Note is changed or created again on his iPad, the note doesn't appear in sync on his iMac notes app and vice versa. Not on the iPhone or iCloud.com

  -If a [email protected] Note is changed or created again on his iPhone, the note appears in sync on the iCloud site Notes app and vice versa

  Any help appreciated for this problem of stadium.

  Thank you

  Well, to answer the question quite simply, in order to synchronize Notes between the three devices, each of them must be signed in with the same ID Apple/iCloud iCloud (@me.com).

  In addition, under settings > iCloud on iPhone and iPad, Notes must be turned on. Under system preferences > iCloud on Mac, Notes must be turned on.

  On the devices in the application Notes, when you click on the arrow to the left at the top on the left, make sure you use 'Notes' in iCloud.

  If you are running iOS 9 on your devices, and that you have upgraded to the latest version of Notes, Mac must be running OS X El Capitan to synchronize.

  See you soon,.

  GB