Complete used Windows 7 install and get a physical picture of the blue screen
Monday my computer was play music on a hard disk when it entered into sleep and started screaming.
It meets all of the keyboard controls, so I reset by holding down the power button.
Since he refuses to load windows 7 but also put white dots on my screen at regular intervals when the system goes through its parameters.
He enters the window of windows beginning it loads the logo entirely with three batches of 3 blue stripes run from top down in the background, but don't effect the logo or the words at all but then says that there is a windows error and can not load.
Asked to do a system repair that may be defective and so I tried to reinstall the operating system instead. The screen has once again a lot of blue lines wavy background through the normal screen of windows 7, which is at the back of the repair of the system window.
I wipe the partitions drive and begin the installation. It goes through the whole plant, until this happens at "Completing installation" then it blue screens says physical dump but blinks in and out and can not read. The rear crossbar start load windows logo, then opens pop-up box saying "installation could not complete due to an unexpected error, please click ok to reinstall windows" and then he turns around and does the same thing again and I'm going around and around.
The graphics card can't be gone because on some screens (like the logo screen to motherboard to get into the Bios etc) there is no error at all, it seems to be nothing to do with black Bios windows or windows screens it puts these error lines. Also the motherboard doesn't mean that there is an error or a fault with it either.
I checked and reformat the hard drive and it works without error.
Tested my 4 GB of ram, who also spent and no mistake. There's nothing wrong with the power supply.
I'm concerned, it's something with my card graph and map mother, or is - something in the BIOS?
WD - 500 GB HDD
Corsair XMS3 - 4 GB of ram (2x2gb 1600 mhz)
Asus P7P55D-E motherboard
Sapphire Pure 950w
Processor i5
I don't know what to do other than replace the motherboard?
I CAN'T get to the office so no start menu stuff please as I can't do it. So I can not download the minidumps or update my system. Unless someone knows how can I update the Bios and drivers without current initialization?
Thank you for your advice. Thanks to everyone for their advice. I got my system running a bit once the new parts increase.
I did some experiments.
I put my brothers old graphics card in my computer and loaded with the operating system without problem.
Does not perform all the updates no bother. I tried my card on day of reclamation, but once again before you complete the download, it crashes and we're back in the loop.
So I think that the map was officially.
I ordered some new parts and make and upgrade with certainly a new graphics card.
But it works now.
So, if anyone has the same problem.
Find another computer and write a check for the new bios for your motherboard and do a flash upload if your motherboard has this function as mine did.
Get out of your hard drive and get the data off it by plugging in a new computer.
Reformat and reinstall the operating system.
If you have problems with your screen such as lines and points like I did then your operating system won't load and you will get "nvlddmkm.sys" your graphics card is totalled.
If she does not do and update on your graphics card.
That's all you can do.
Tags: Windows
Similar Questions
-
I use Windows live mail and after error message is produced-help please
An unknown error has occurred.
"Subject ' Fw: current details for masonry"
Server error: 550
Server response: 550 IP address 86.161.164.216 in XBL
Server: 'mail.dtsconstruction.co.uk '.
Windows Live Mail error ID: 0x800CCC69
Protocol: SMTP
Port: 25
Secure (SSL): No.Submit all Live and Hotmail queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
Whenever I try to install firefox on my laptop, I get a message saying that the installation was interrupted. I use windows 7.
Try the full installer...
-
Have a new laptop with Windows 7. Responsible for Office 2007. Cannot open the old Excel files. Get the error reading .xlsx is not a valid Win32 application when I try to open the file.
Right-click on the Xlsx file and select open with. Then find Excel and make sure that it is selected to always open with this program. Click OK, and then see if it works
-
use a flash drive, and now it is frozen on the main screen.
have a g7 United States 1150 laptop pavilion
Windows xp
put it in a flash drive and its deadlock on the screen, even after we out took it. tried rebooting twice and restarted, but it won't let
.
Help
NO, I COULDN'T IMAGE TEXT OFF THE SCREEN. I COULD CLOSE.
BUT IT TURNS OUT THAT MY DAUGHTER SHOULD OF SAVED AS SCREEN SAVER. GOT RID OF HIM
THANKS FOR YOUR RESPONSE
-
Open Lightroom preferences, go to the performance tab, disable the GPU option.
-
my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid
Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.
If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:
Trial license:
http://Office.Microsoft.com/en-us/try/
Full license:
http://support.Microsoft.com/kb/823570
Get the key;
http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520
If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:
http://support.Microsoft.com/kb/2002262
Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs
http://support.Microsoft.com/kb/927921
Error message when you start an Office application after installing a suite Office: "invalid product key".
http://support.Microsoft.com/kb/836178
If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:
Run the patch tool mentioned in the article below to uninstall Office 2010:
http://support.Microsoft.com/kb/290301
Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:
Trial license:
http://Office.Microsoft.com/en-us/try/
See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.
-
I find the minidump files and tried opening them and could not. Files and downloaded programs of debugging appear in the program. When I try to open them I get "you must be an administrator to open" insofar as I know that I am the administrator because supposedly everything I need is another administrator account. Also my restore will pass in a few days, and the box is no longer available. Also had an error on my printer files so I removed them, but as I (after) that I pressed the firm PC, the blue screen appeared and had to turn it off manually and of course got the minidump error message when I started again. If at this point, I'm still waiting to see if deleting the files printer helped. Any information would be appreciated.
OK, I'll look for your next post with minidump files.
-
I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.
Hello Brenda,.
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
Windows Vista 64-bit
I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore. I'm now trying to restore my files however, I get an error message that says the missing user account... "files that you are restoring have security permissions to a user account that is not found on this computer. The missing account is shown below... Dad-PC\ADMIN."the problem is, that a user account name cannot contain the"------"what to do? Thanks in advance!Hello
at the end of my 1st response is a link to the appropriate forum for these questions
If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
Is there anywhere to get a new copy of the system recovery disc for my windows vista computer. I have a HP Pavillion and I get not anywhere when trying to start repair, it tries to fix my computer and takes forever... and then I get the blue screen saying I need to reload windows. The recovery discs that I burned when I bought the computer do not work. What are my options?
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
With HP normally press you F11 at startup to start the process of recovery from the recovery partition
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246
If the problem persists with the recovery process, contact HP
http://welcome.HP.com/country/us/en/contact_us.html
or try HP support froums
-
Can not install windows KB973917 update and getting error code 8000FFF
I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM. I can't install the windows KB973917 update and getting error code 8000FFF. I have tried everything to fix it, but have had no luck. Someone had the same problem?
A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm
8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
http://support.Microsoft.com/kb/946414 -
After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof
Hi sgodwin2468,
Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.
If the problem persists, try the solution below.
The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:
Kind regards
Nicos
-
I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7
Error code 1 is often associated with permission issues. Have you tried to install Illustrator in a new user account with admin rights? If you want to download CS6, here's how to get it through creative cloud: html http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications.
Let us know how it goes.
Concerning
Stéphane
-
I am using Windows 8.1 and I just installed Creative Cloud Desktop but whenever I try to open a session then sign
I tried logging in and out and reinstall but still fails to connect
Contact adobe support, http://helpx.adobe.com/x-productkb/global/service-ccm.html
Maybe you are looking for
-
Hello! I ordered a 7 sillicone iPhone a few days previously in Miami (it is supposed to arrive tomorrow) and yesterday, I decided to send it back. I live in the Venezuela and I would return when I get to get to US, so I don't have to worry about my f
-
HP 15 ay008tx: bad warranty period
I bought my new laptop computer HP on October 2, 2016, and when I checked its warranty status, he showed the date as June 22, 2016. It is wrong, and my warranty period must be corrected. I have disputed against the warranty period, but received no an
-
Equium L40 - cannot install Win XP
Hello I have a Toshiba Satellite L40 and it has Vista on it normally, but I wanted to install XP on it.So I did. But there was a problem once I install it.So I reinstall XP. But in the treatment, something was wrong and the computer turn off by itsel
-
Reminders stop working on the IPaq rx3115 Pocket PC
I have an IPaq rx3115 running Windows Mobile 2003 Second Edition, Version 4.21.1088. So far, everything works OK, but reminders of appointments have ceased functioning. I performed a hard reset of the device, and they have started to work. but afte
-
Pavilion dv 7 4061 nr WQ871UA: want to replace hd
My son put in a 120 gig ssd when my orig hd failed, not realizing I had a recovery partition and needed a great dr. I would like to replace the original drive.but hard does not know that one was, a320 gig sata I think.will a portable hard drive 320 G